// Loaded from https://deno.land/x/compress@v0.3.8/zlib/zlib/deflate.ts


import { message as msg, CODE } from "./messages.ts";
import type ZStream from "./zstream.ts";
import * as trees from "./trees.ts";
import adler32 from "./adler32.ts";
import { crc32 } from "./crc32.ts";
import STATUS from "./status.ts";

/* Return codes for the compression/decompression functions. Negative values
 * are errors, positive values are used for special but normal events.
 */
const Z_OK = 0;
const Z_STREAM_END = 1;
//const Z_NEED_DICT     = 2;
//const Z_ERRNO         = -1;
const Z_STREAM_ERROR = -2;
const Z_DATA_ERROR = -3;
//const Z_MEM_ERROR     = -4;
const Z_BUF_ERROR = -5;
//const Z_VERSION_ERROR = -6;

/* compression levels */
//const Z_NO_COMPRESSION      = 0;
//const Z_BEST_SPEED          = 1;
//const Z_BEST_COMPRESSION    = 9;
const Z_DEFAULT_COMPRESSION = -1;

const Z_FILTERED = 1;
const Z_HUFFMAN_ONLY = 2;
const Z_RLE = 3;
const Z_FIXED = 4;
const Z_DEFAULT_STRATEGY = 0;

/* Possible values of the data_type field (though see inflate()) */
//const Z_BINARY              = 0;
//const Z_TEXT                = 1;
//const Z_ASCII               = 1; // = Z_TEXT
const Z_UNKNOWN = 2;

/* The deflate compression method */
const Z_DEFLATED = 8;

const MAX_MEM_LEVEL = 9;
/* Maximum value for memLevel in deflateInit2 */
const MAX_WBITS = 15;
/* 32K LZ77 window */
const DEF_MEM_LEVEL = 8;

const LENGTH_CODES = 29;
/* number of length codes, not counting the special END_BLOCK code */
const LITERALS = 256;
/* number of literal bytes 0..255 */
const L_CODES = LITERALS + 1 + LENGTH_CODES;
/* number of Literal or Length codes, including the END_BLOCK code */
const D_CODES = 30;
/* number of distance codes */
const BL_CODES = 19;
/* number of codes used to transfer the bit lengths */
const HEAP_SIZE = 2 * L_CODES + 1;
/* maximum heap size */
const MAX_BITS = 15;
/* All codes must not exceed MAX_BITS bits */

const MIN_MATCH = 3;
const MAX_MATCH = 258;
const MIN_LOOKAHEAD = (MAX_MATCH + MIN_MATCH + 1);
const PRESET_DICT = 0x20;
const INIT_STATE = 42;
const EXTRA_STATE = 69;
const NAME_STATE = 73;
const COMMENT_STATE = 91;
const HCRC_STATE = 103;
const BUSY_STATE = 113;
const FINISH_STATE = 666;
const BS_NEED_MORE =
  1; /* block not completed, need more input or more output */
const BS_BLOCK_DONE = 2; /* block flush performed */
const BS_FINISH_STARTED =
  3; /* finish started, need only more output at next deflate */
const BS_FINISH_DONE = 4; /* finish done, accept no more input or output */
const OS_CODE = 0x03; // Unix :) . Don't detect, use this default.

export interface Header {
  text: boolean;
  time: number;
  os: number;
  extra: string[];
  name: string;
  comment: string;
  hcrc: boolean;
}

function err(strm: ZStream, errorCode: CODE) {
  strm.msg = msg[errorCode];
  return errorCode;
}

function rank(f: number): number {
  return ((f) << 1) - ((f) > 4 ? 9 : 0);
}

function zero(buf: Uint8Array | Uint16Array) {
  buf.fill(0, 0, buf.length);
}

/* =========================================================================
 * Flush as much pending output as possible. All deflate() output goes
 * through this function so some applications may wish to modify it
 * to avoid allocating a large strm->output buffer and copying into it.
 * (See also read_buf()).
 */
function flush_pending(strm: ZStream) {
  let s = strm.state as DeflateState;

  //_tr_flush_bits(s);
  let len = s.pending;
  if (len > strm.avail_out) {
    len = strm.avail_out;
  }
  if (len === 0) return;
  strm.output!.set(
    s.pending_buf.subarray(s.pending_out, s.pending_out + len),
    strm.next_out,
  );
  strm.next_out += len;
  s.pending_out += len;
  strm.total_out += len;
  strm.avail_out -= len;
  s.pending -= len;
  if (s.pending === 0) {
    s.pending_out = 0;
  }
}

function flush_block_only(s: DeflateState, last: any) {
  trees._tr_flush_block(
    s,
    (s.block_start >= 0 ? s.block_start : -1),
    s.strstart - s.block_start,
    last,
  );
  s.block_start = s.strstart;
  flush_pending(s.strm!);
}

function put_byte(s: any, b: any) {
  s.pending_buf[s.pending++] = b;
}

/* =========================================================================
 * Put a short in the pending buffer. The 16-bit value is put in MSB order.
 * IN assertion: the stream state is correct and there is enough room in
 * pending_buf.
 */
function putShortMSB(s: any, b: any) {
  //  put_byte(s, (Byte)(b >> 8));
  //  put_byte(s, (Byte)(b & 0xff));
  s.pending_buf[s.pending++] = (b >>> 8) & 0xff;
  s.pending_buf[s.pending++] = b & 0xff;
}

/* ===========================================================================
 * Read a new buffer from the current input stream, update the adler32
 * and total number of bytes read.  All deflate() input goes through
 * this function so some applications may wish to modify it to avoid
 * allocating a large strm->input buffer and copying from it.
 * (See also flush_pending()).
 */
function read_buf(strm: any, buf: any, start: any, size: any) {
  let len = strm.avail_in;

  if (len > size) len = size;
  if (len === 0) return 0;

  strm.avail_in -= len;

  // zmemcpy(buf, strm->next_in, len);
  buf.set(strm.input.subarray(strm.next_in, strm.next_in + len), start);
  if (strm.state.wrap === 1) {
    strm.adler = adler32(strm.adler, buf, len, start);
  } else if (strm.state.wrap === 2) {
    strm.adler = crc32(strm.adler, buf, len, start);
  }

  strm.next_in += len;
  strm.total_in += len;

  return len;
}

/* ===========================================================================
 * Set match_start to the longest match starting at the given string and
 * return its length. Matches shorter or equal to prev_length are discarded,
 * in which case the result is equal to prev_length and match_start is
 * garbage.
 * IN assertions: cur_match is the head of the hash chain for the current
 *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
 * OUT assertion: the match length is not greater than s->lookahead.
 */
function longest_match(s: any, cur_match: any) {
  let chain_length = s.max_chain_length; /* max hash chain length */
  let scan = s.strstart; /* current string */
  let match; /* matched string */
  let len; /* length of current match */
  let best_len = s.prev_length; /* best match length so far */
  let nice_match = s.nice_match; /* stop if match long enough */
  let limit = (s.strstart > (s.w_size - MIN_LOOKAHEAD))
    ? s.strstart - (s.w_size - MIN_LOOKAHEAD)
    : 0 /*NIL*/;

  let _win = s.window; // shortcut

  let wmask = s.w_mask;
  let prev = s.prev;

  /* Stop when cur_match becomes <= limit. To simplify the code,
   * we prevent matches with the string of window index 0.
   */

  let strend = s.strstart + MAX_MATCH;
  let scan_end1 = _win[scan + best_len - 1];
  let scan_end = _win[scan + best_len];

  /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
   * It is easy to get rid of this optimization if necessary.
   */
  // Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");

  /* Do not waste too much time if we already have a good match: */
  if (s.prev_length >= s.good_match) {
    chain_length >>= 2;
  }
  /* Do not look for matches beyond the end of the input. This is necessary
   * to make deflate deterministic.
   */
  if (nice_match > s.lookahead) nice_match = s.lookahead;

  // Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");

  do {
    // Assert(cur_match < s->strstart, "no future");
    match = cur_match;

    /* Skip to next match if the match length cannot increase
     * or if the match length is less than 2.  Note that the checks below
     * for insufficient lookahead only occur occasionally for performance
     * reasons.  Therefore uninitialized memory will be accessed, and
     * conditional jumps will be made that depend on those values.
     * However the length of the match is limited to the lookahead, so
     * the output of deflate is not affected by the uninitialized values.
     */

    if (
      _win[match + best_len] !== scan_end ||
      _win[match + best_len - 1] !== scan_end1 ||
      _win[match] !== _win[scan] ||
      _win[++match] !== _win[scan + 1]
    ) {
      continue;
    }

    /* The check at best_len-1 can be removed because it will be made
     * again later. (This heuristic is not always a win.)
     * It is not necessary to compare scan[2] and match[2] since they
     * are always equal when the other bytes match, given that
     * the hash keys are equal and that HASH_BITS >= 8.
     */
    scan += 2;
    match++;
    // Assert(*scan == *match, "match[2]?");

    /* We check for insufficient lookahead only every 8th comparison;
     * the 256th check will be made at strstart+258.
     */
    do {
      /*jshint noempty:false*/
    } while (
      _win[++scan] === _win[++match] && _win[++scan] === _win[++match] &&
      _win[++scan] === _win[++match] && _win[++scan] === _win[++match] &&
      _win[++scan] === _win[++match] && _win[++scan] === _win[++match] &&
      _win[++scan] === _win[++match] && _win[++scan] === _win[++match] &&
      scan < strend
    );

    // Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");

    len = MAX_MATCH - (strend - scan);
    scan = strend - MAX_MATCH;

    if (len > best_len) {
      s.match_start = cur_match;
      best_len = len;
      if (len >= nice_match) {
        break;
      }
      scan_end1 = _win[scan + best_len - 1];
      scan_end = _win[scan + best_len];
    }
  } while (
    (cur_match = prev[cur_match & wmask]) > limit && --chain_length !== 0
  );

  if (best_len <= s.lookahead) {
    return best_len;
  }
  return s.lookahead;
}

/* ===========================================================================
 * Fill the window when the lookahead becomes insufficient.
 * Updates strstart and lookahead.
 *
 * IN assertion: lookahead < MIN_LOOKAHEAD
 * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
 *    At least one byte has been read, or avail_in == 0; reads are
 *    performed for at least two bytes (required for the zip translate_eol
 *    option -- not supported here).
 */
function fill_window(s: any) {
  let _w_size = s.w_size;
  let p, n, m, more, str;

  //Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");

  do {
    more = s.window_size - s.lookahead - s.strstart;

    // JS ints have 32 bit, block below not needed
    /* Deal with !@#$% 64K limit: */
    //if (sizeof(int) <= 2) {
    //    if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
    //        more = wsize;
    //
    //  } else if (more == (unsigned)(-1)) {
    //        /* Very unlikely, but possible on 16 bit machine if
    //         * strstart == 0 && lookahead == 1 (input done a byte at time)
    //         */
    //        more--;
    //    }
    //}

    /* If the window is almost full and there is insufficient lookahead,
     * move the upper half to the lower one to make room in the upper half.
     */
    if (s.strstart >= _w_size + (_w_size - MIN_LOOKAHEAD)) {
      s.window.set(s.window.subarray(_w_size, _w_size + _w_size), 0);
      s.match_start -= _w_size;
      s.strstart -= _w_size;
      /* we now have strstart >= MAX_DIST */
      s.block_start -= _w_size;

      /* Slide the hash table (could be avoided with 32 bit values
       at the expense of memory usage). We slide even when level == 0
       to keep the hash table consistent if we switch back to level > 0
       later. (Using level 0 permanently is not an optimal usage of
       zlib, so we don't care about this pathological case.)
       */

      n = s.hash_size;
      p = n;
      do {
        m = s.head[--p];
        s.head[p] = (m >= _w_size ? m - _w_size : 0);
      } while (--n);

      n = _w_size;
      p = n;
      do {
        m = s.prev[--p];
        s.prev[p] = (m >= _w_size ? m - _w_size : 0);
        /* If n is not on any hash chain, prev[n] is garbage but
         * its value will never be used.
         */
      } while (--n);

      more += _w_size;
    }
    if (s.strm.avail_in === 0) {
      break;
    }

    /* If there was no sliding:
     *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
     *    more == window_size - lookahead - strstart
     * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
     * => more >= window_size - 2*WSIZE + 2
     * In the BIG_MEM or MMAP case (not yet supported),
     *   window_size == input_size + MIN_LOOKAHEAD  &&
     *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
     * Otherwise, window_size == 2*WSIZE so more >= 2.
     * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
     */
    //Assert(more >= 2, "more < 2");
    n = read_buf(s.strm, s.window, s.strstart + s.lookahead, more);
    s.lookahead += n;

    /* Initialize the hash value now that we have some input: */
    if (s.lookahead + s.insert >= MIN_MATCH) {
      str = s.strstart - s.insert;
      s.ins_h = s.window[str];

      /* UPDATE_HASH(s, s->ins_h, s->window[str + 1]); */
      s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[str + 1]) & s.hash_mask;
      //#if MIN_MATCH != 3
      //        Call update_hash() MIN_MATCH-3 more times
      //#endif
      while (s.insert) {
        /* UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); */
        s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[str + MIN_MATCH - 1]) &
          s.hash_mask;

        s.prev[str & s.w_mask] = s.head[s.ins_h];
        s.head[s.ins_h] = str;
        str++;
        s.insert--;
        if (s.lookahead + s.insert < MIN_MATCH) {
          break;
        }
      }
    }
    /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
     * but this is not important since only literal bytes will be emitted.
     */
  } while (s.lookahead < MIN_LOOKAHEAD && s.strm.avail_in !== 0);

  /* If the WIN_INIT bytes after the end of the current data have never been
   * written, then zero those bytes in order to avoid memory check reports of
   * the use of uninitialized (or uninitialised as Julian writes) bytes by
   * the longest match routines.  Update the high water mark for the next
   * time through here.  WIN_INIT is set to MAX_MATCH since the longest match
   * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
   */
  //  if (s.high_water < s.window_size) {
  //    let curr = s.strstart + s.lookahead;
  //    let init = 0;
  //
  //    if (s.high_water < curr) {
  //      /* Previous high water mark below current data -- zero WIN_INIT
  //       * bytes or up to end of window, whichever is less.
  //       */
  //      init = s.window_size - curr;
  //      if (init > WIN_INIT)
  //        init = WIN_INIT;
  //      zmemzero(s->window + curr, (unsigned)init);
  //      s->high_water = curr + init;
  //    }
  //    else if (s->high_water < (ulg)curr + WIN_INIT) {
  //      /* High water mark at or above current data, but below current data
  //       * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
  //       * to end of window, whichever is less.
  //       */
  //      init = (ulg)curr + WIN_INIT - s->high_water;
  //      if (init > s->window_size - s->high_water)
  //        init = s->window_size - s->high_water;
  //      zmemzero(s->window + s->high_water, (unsigned)init);
  //      s->high_water += init;
  //    }
  //  }
  //
  //  Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
  //    "not enough room for search");
}

/* ===========================================================================
 * Copy without compression as much as possible from the input stream, return
 * the current block state.
 * This function does not insert new strings in the dictionary since
 * uncompressible data is probably not useful. This function is used
 * only for the level=0 compression option.
 * NOTE: this function should be optimized to avoid extra copying from
 * window to pending_buf.
 */
function deflate_stored(s: any, flush: any) {
  /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
   * to pending_buf_size, and each stored block has a 5 byte header:
   */
  let max_block_size = 0xffff;

  if (max_block_size > s.pending_buf_size - 5) {
    max_block_size = s.pending_buf_size - 5;
  }

  /* Copy as much as possible from input to output: */
  for (;;) {
    /* Fill the window as much as possible: */
    if (s.lookahead <= 1) {
      //Assert(s->strstart < s->w_size+MAX_DIST(s) ||
      //  s->block_start >= (long)s->w_size, "slide too late");
      //      if (!(s.strstart < s.w_size + (s.w_size - MIN_LOOKAHEAD) ||
      //        s.block_start >= s.w_size)) {
      //        throw  new Error("slide too late");
      //      }

      fill_window(s);
      if (s.lookahead === 0 && flush === STATUS.Z_NO_FLUSH) {
        return BS_NEED_MORE;
      }

      if (s.lookahead === 0) {
        break;
      }
      /* flush the current block */
    }
    //Assert(s->block_start >= 0L, "block gone");
    //    if (s.block_start < 0) throw new Error("block gone");

    s.strstart += s.lookahead;
    s.lookahead = 0;

    /* Emit a stored block if pending_buf will be full: */
    let max_start = s.block_start + max_block_size;

    if (s.strstart === 0 || s.strstart >= max_start) {
      /* strstart == 0 is possible when wraparound on 16-bit machine */
      s.lookahead = s.strstart - max_start;
      s.strstart = max_start;
      /*** FLUSH_BLOCK(s, 0); ***/
      flush_block_only(s, false);
      if (s.strm.avail_out === 0) {
        return BS_NEED_MORE;
      }
      /***/
    }
    /* Flush if we may have to slide, otherwise block_start may become
     * negative and the data will be gone:
     */
    if (s.strstart - s.block_start >= (s.w_size - MIN_LOOKAHEAD)) {
      /*** FLUSH_BLOCK(s, 0); ***/
      flush_block_only(s, false);
      if (s.strm.avail_out === 0) {
        return BS_NEED_MORE;
      }
      /***/
    }
  }

  s.insert = 0;

  if (flush === STATUS.Z_FINISH) {
    /*** FLUSH_BLOCK(s, 1); ***/
    flush_block_only(s, true);
    if (s.strm.avail_out === 0) {
      return BS_FINISH_STARTED;
    }
    /***/
    return BS_FINISH_DONE;
  }

  if (s.strstart > s.block_start) {
    /*** FLUSH_BLOCK(s, 0); ***/
    flush_block_only(s, false);
    if (s.strm.avail_out === 0) {
      return BS_NEED_MORE;
    }
    /***/
  }

  return BS_NEED_MORE;
}

/* ===========================================================================
 * Compress as much as possible from the input stream, return the current
 * block state.
 * This function does not perform lazy evaluation of matches and inserts
 * new strings in the dictionary only for unmatched strings or for short
 * matches. It is used only for the fast compression options.
 */
function deflate_fast(s: any, flush: any) {
  let hash_head; /* head of the hash chain */
  let bflush; /* set if current block must be flushed */

  for (;;) {
    /* Make sure that we always have enough lookahead, except
     * at the end of the input file. We need MAX_MATCH bytes
     * for the next match, plus MIN_MATCH bytes to insert the
     * string following the next match.
     */
    if (s.lookahead < MIN_LOOKAHEAD) {
      fill_window(s);
      if (s.lookahead < MIN_LOOKAHEAD && flush === STATUS.Z_NO_FLUSH) {
        return BS_NEED_MORE;
      }
      if (s.lookahead === 0) {
        break; /* flush the current block */
      }
    }

    /* Insert the string window[strstart .. strstart+2] in the
     * dictionary, and set hash_head to the head of the hash chain:
     */
    hash_head = 0 /*NIL*/;
    if (s.lookahead >= MIN_MATCH) {
      /*** INSERT_STRING(s, s.strstart, hash_head); ***/
      s.ins_h =
        ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + MIN_MATCH - 1]) &
        s.hash_mask;
      hash_head = s.prev[s.strstart & s.w_mask] = s.head[s.ins_h];
      s.head[s.ins_h] = s.strstart;
      /***/
    }

    /* Find the longest match, discarding those <= prev_length.
     * At this point we have always match_length < MIN_MATCH
     */
    if (
      hash_head !== 0 /*NIL*/ &&
      ((s.strstart - hash_head) <= (s.w_size - MIN_LOOKAHEAD))
    ) {
      /* To simplify the code, we prevent matches with the string
       * of window index 0 (in particular we have to avoid a match
       * of the string with itself at the start of the input file).
       */
      s.match_length = longest_match(s, hash_head);
      /* longest_match() sets match_start */
    }
    if (s.match_length >= MIN_MATCH) {
      // check_match(s, s.strstart, s.match_start, s.match_length); // for debug only

      /*** _tr_tally_dist(s, s.strstart - s.match_start,
                     s.match_length - MIN_MATCH, bflush); ***/
      bflush = trees._tr_tally(
        s,
        s.strstart - s.match_start,
        s.match_length - MIN_MATCH,
      );

      s.lookahead -= s.match_length;

      /* Insert new strings in the hash table only if the match length
       * is not too large. This saves time but degrades compression.
       */
      if (
        s.match_length <= s.max_lazy_match /*max_insert_length*/ &&
        s.lookahead >= MIN_MATCH
      ) {
        s.match_length--; /* string at strstart already in table */
        do {
          s.strstart++;
          /*** INSERT_STRING(s, s.strstart, hash_head); ***/
          s.ins_h =
            ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + MIN_MATCH - 1]) &
            s.hash_mask;
          hash_head = s.prev[s.strstart & s.w_mask] = s.head[s.ins_h];
          s.head[s.ins_h] = s.strstart;
          /***/
          /* strstart never exceeds WSIZE-MAX_MATCH, so there are
           * always MIN_MATCH bytes ahead.
           */
        } while (--s.match_length !== 0);
        s.strstart++;
      } else {
        s.strstart += s.match_length;
        s.match_length = 0;
        s.ins_h = s.window[s.strstart];
        /* UPDATE_HASH(s, s.ins_h, s.window[s.strstart+1]); */
        s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + 1]) &
          s.hash_mask;

        //#if MIN_MATCH != 3
        //                Call UPDATE_HASH() MIN_MATCH-3 more times
        //#endif
        /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
         * matter since it will be recomputed at next deflate call.
         */
      }
    } else {
      /* No match, output a literal byte */
      //Tracevv((stderr,"%c", s.window[s.strstart]));
      /*** _tr_tally_lit(s, s.window[s.strstart], bflush); ***/
      bflush = trees._tr_tally(s, 0, s.window[s.strstart]);

      s.lookahead--;
      s.strstart++;
    }
    if (bflush) {
      /*** FLUSH_BLOCK(s, 0); ***/
      flush_block_only(s, false);
      if (s.strm.avail_out === 0) {
        return BS_NEED_MORE;
      }
      /***/
    }
  }
  s.insert = ((s.strstart < (MIN_MATCH - 1)) ? s.strstart : MIN_MATCH - 1);
  if (flush === STATUS.Z_FINISH) {
    /*** FLUSH_BLOCK(s, 1); ***/
    flush_block_only(s, true);
    if (s.strm.avail_out === 0) {
      return BS_FINISH_STARTED;
    }
    /***/
    return BS_FINISH_DONE;
  }
  if (s.last_lit) {
    /*** FLUSH_BLOCK(s, 0); ***/
    flush_block_only(s, false);
    if (s.strm.avail_out === 0) {
      return BS_NEED_MORE;
    }
    /***/
  }
  return BS_BLOCK_DONE;
}

/* ===========================================================================
 * Same as above, but achieves better compression. We use a lazy
 * evaluation for matches: a match is finally adopted only if there is
 * no better match at the next window position.
 */
function deflate_slow(s: any, flush: any) {
  let hash_head; /* head of hash chain */
  let bflush; /* set if current block must be flushed */

  let max_insert;

  /* Process the input block. */
  for (;;) {
    /* Make sure that we always have enough lookahead, except
     * at the end of the input file. We need MAX_MATCH bytes
     * for the next match, plus MIN_MATCH bytes to insert the
     * string following the next match.
     */
    if (s.lookahead < MIN_LOOKAHEAD) {
      fill_window(s);
      if (s.lookahead < MIN_LOOKAHEAD && flush === STATUS.Z_NO_FLUSH) {
        return BS_NEED_MORE;
      }
      if (s.lookahead === 0) break; /* flush the current block */
    }

    /* Insert the string window[strstart .. strstart+2] in the
     * dictionary, and set hash_head to the head of the hash chain:
     */
    hash_head = 0 /*NIL*/;
    if (s.lookahead >= MIN_MATCH) {
      /*** INSERT_STRING(s, s.strstart, hash_head); ***/
      s.ins_h =
        ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + MIN_MATCH - 1]) &
        s.hash_mask;
      hash_head = s.prev[s.strstart & s.w_mask] = s.head[s.ins_h];
      s.head[s.ins_h] = s.strstart;
      /***/
    }

    /* Find the longest match, discarding those <= prev_length.
     */
    s.prev_length = s.match_length;
    s.prev_match = s.match_start;
    s.match_length = MIN_MATCH - 1;

    if (
      hash_head !== 0 /*NIL*/ && s.prev_length < s.max_lazy_match &&
      s.strstart - hash_head <= (s.w_size - MIN_LOOKAHEAD) /*MAX_DIST(s)*/
    ) {
      /* To simplify the code, we prevent matches with the string
       * of window index 0 (in particular we have to avoid a match
       * of the string with itself at the start of the input file).
       */
      s.match_length = longest_match(s, hash_head);
      /* longest_match() sets match_start */

      if (
        s.match_length <= 5 &&
        (s.strategy === Z_FILTERED ||
          (s.match_length === MIN_MATCH &&
            s.strstart - s.match_start > 4096 /*TOO_FAR*/))
      ) {
        /* If prev_match is also MIN_MATCH, match_start is garbage
         * but we will ignore the current match anyway.
         */
        s.match_length = MIN_MATCH - 1;
      }
    }
    /* If there was a match at the previous step and the current
     * match is not better, output the previous match:
     */
    if (s.prev_length >= MIN_MATCH && s.match_length <= s.prev_length) {
      max_insert = s.strstart + s.lookahead - MIN_MATCH;
      /* Do not insert strings in hash table beyond this. */

      //check_match(s, s.strstart-1, s.prev_match, s.prev_length);

      /***_tr_tally_dist(s, s.strstart - 1 - s.prev_match,
                     s.prev_length - MIN_MATCH, bflush);***/
      bflush = trees._tr_tally(
        s,
        s.strstart - 1 - s.prev_match,
        s.prev_length - MIN_MATCH,
      );
      /* Insert in hash table all strings up to the end of the match.
       * strstart-1 and strstart are already inserted. If there is not
       * enough lookahead, the last two strings are not inserted in
       * the hash table.
       */
      s.lookahead -= s.prev_length - 1;
      s.prev_length -= 2;
      do {
        if (++s.strstart <= max_insert) {
          /*** INSERT_STRING(s, s.strstart, hash_head); ***/
          s.ins_h =
            ((s.ins_h << s.hash_shift) ^ s.window[s.strstart + MIN_MATCH - 1]) &
            s.hash_mask;
          hash_head = s.prev[s.strstart & s.w_mask] = s.head[s.ins_h];
          s.head[s.ins_h] = s.strstart;
          /***/
        }
      } while (--s.prev_length !== 0);
      s.match_available = 0;
      s.match_length = MIN_MATCH - 1;
      s.strstart++;

      if (bflush) {
        /*** FLUSH_BLOCK(s, 0); ***/
        flush_block_only(s, false);
        if (s.strm.avail_out === 0) {
          return BS_NEED_MORE;
        }
        /***/
      }
    } else if (s.match_available) {
      /* If there was no match at the previous position, output a
       * single literal. If there was a match but the current match
       * is longer, truncate the previous match to a single literal.
       */
      //Tracevv((stderr,"%c", s->window[s->strstart-1]));
      /*** _tr_tally_lit(s, s.window[s.strstart-1], bflush); ***/
      bflush = trees._tr_tally(s, 0, s.window[s.strstart - 1]);

      if (bflush) {
        /*** FLUSH_BLOCK_ONLY(s, 0) ***/
        flush_block_only(s, false);
        /***/
      }
      s.strstart++;
      s.lookahead--;
      if (s.strm.avail_out === 0) {
        return BS_NEED_MORE;
      }
    } else {
      /* There is no previous match to compare with, wait for
       * the next step to decide.
       */
      s.match_available = 1;
      s.strstart++;
      s.lookahead--;
    }
  }
  //Assert (flush != Z_NO_FLUSH, "no flush?");
  if (s.match_available) {
    //Tracevv((stderr,"%c", s->window[s->strstart-1]));
    /*** _tr_tally_lit(s, s.window[s.strstart-1], bflush); ***/
    bflush = trees._tr_tally(s, 0, s.window[s.strstart - 1]);

    s.match_available = 0;
  }
  s.insert = s.strstart < MIN_MATCH - 1 ? s.strstart : MIN_MATCH - 1;
  if (flush === STATUS.Z_FINISH) {
    /*** FLUSH_BLOCK(s, 1); ***/
    flush_block_only(s, true);
    if (s.strm.avail_out === 0) {
      return BS_FINISH_STARTED;
    }
    /***/
    return BS_FINISH_DONE;
  }
  if (s.last_lit) {
    /*** FLUSH_BLOCK(s, 0); ***/
    flush_block_only(s, false);
    if (s.strm.avail_out === 0) {
      return BS_NEED_MORE;
    }
    /***/
  }

  return BS_BLOCK_DONE;
}

/* ===========================================================================
 * For Z_RLE, simply look for runs of bytes, generate matches only of distance
 * one.  Do not maintain a hash table.  (It will be regenerated if this run of
 * deflate switches away from Z_RLE.)
 */
function deflate_rle(s: any, flush: any) {
  let bflush; /* set if current block must be flushed */
  let prev; /* byte at distance one to match */
  let scan, strend; /* scan goes up to strend for length of run */

  let _win = s.window;

  for (;;) {
    /* Make sure that we always have enough lookahead, except
     * at the end of the input file. We need MAX_MATCH bytes
     * for the longest run, plus one for the unrolled loop.
     */
    if (s.lookahead <= MAX_MATCH) {
      fill_window(s);
      if (s.lookahead <= MAX_MATCH && flush === STATUS.Z_NO_FLUSH) {
        return BS_NEED_MORE;
      }
      if (s.lookahead === 0) break; /* flush the current block */
    }

    /* See how many times the previous byte repeats */
    s.match_length = 0;
    if (s.lookahead >= MIN_MATCH && s.strstart > 0) {
      scan = s.strstart - 1;
      prev = _win[scan];
      if (
        prev === _win[++scan] && prev === _win[++scan] &&
        prev === _win[++scan]
      ) {
        strend = s.strstart + MAX_MATCH;
        do {
          /*jshint noempty:false*/
        } while (
          prev === _win[++scan] && prev === _win[++scan] &&
          prev === _win[++scan] && prev === _win[++scan] &&
          prev === _win[++scan] && prev === _win[++scan] &&
          prev === _win[++scan] && prev === _win[++scan] &&
          scan < strend
        );
        s.match_length = MAX_MATCH - (strend - scan);
        if (s.match_length > s.lookahead) {
          s.match_length = s.lookahead;
        }
      }
      //Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
    }

    /* Emit match if have run of MIN_MATCH or longer, else emit literal */
    if (s.match_length >= MIN_MATCH) {
      //check_match(s, s.strstart, s.strstart - 1, s.match_length);

      /*** _tr_tally_dist(s, 1, s.match_length - MIN_MATCH, bflush); ***/
      bflush = trees._tr_tally(s, 1, s.match_length - MIN_MATCH);

      s.lookahead -= s.match_length;
      s.strstart += s.match_length;
      s.match_length = 0;
    } else {
      /* No match, output a literal byte */
      //Tracevv((stderr,"%c", s->window[s->strstart]));
      /*** _tr_tally_lit(s, s.window[s.strstart], bflush); ***/
      bflush = trees._tr_tally(s, 0, s.window[s.strstart]);

      s.lookahead--;
      s.strstart++;
    }
    if (bflush) {
      /*** FLUSH_BLOCK(s, 0); ***/
      flush_block_only(s, false);
      if (s.strm.avail_out === 0) {
        return BS_NEED_MORE;
      }
      /***/
    }
  }
  s.insert = 0;
  if (flush === STATUS.Z_FINISH) {
    /*** FLUSH_BLOCK(s, 1); ***/
    flush_block_only(s, true);
    if (s.strm.avail_out === 0) {
      return BS_FINISH_STARTED;
    }
    /***/
    return BS_FINISH_DONE;
  }
  if (s.last_lit) {
    /*** FLUSH_BLOCK(s, 0); ***/
    flush_block_only(s, false);
    if (s.strm.avail_out === 0) {
      return BS_NEED_MORE;
    }
    /***/
  }
  return BS_BLOCK_DONE;
}

/* ===========================================================================
 * For Z_HUFFMAN_ONLY, do not look for matches.  Do not maintain a hash table.
 * (It will be regenerated if this run of deflate switches away from Huffman.)
 */
function deflate_huff(s: any, flush: any) {
  let bflush; /* set if current block must be flushed */

  for (;;) {
    /* Make sure that we have a literal to write. */
    if (s.lookahead === 0) {
      fill_window(s);
      if (s.lookahead === 0) {
        if (flush === STATUS.Z_NO_FLUSH) {
          return BS_NEED_MORE;
        }
        break; /* flush the current block */
      }
    }

    /* Output a literal byte */
    s.match_length = 0;
    //Tracevv((stderr,"%c", s->window[s->strstart]));
    /*** _tr_tally_lit(s, s.window[s.strstart], bflush); ***/
    bflush = trees._tr_tally(s, 0, s.window[s.strstart]);
    s.lookahead--;
    s.strstart++;
    if (bflush) {
      /*** FLUSH_BLOCK(s, 0); ***/
      flush_block_only(s, false);
      if (s.strm.avail_out === 0) {
        return BS_NEED_MORE;
      }
      /***/
    }
  }
  s.insert = 0;
  if (flush === STATUS.Z_FINISH) {
    /*** FLUSH_BLOCK(s, 1); ***/
    flush_block_only(s, true);
    if (s.strm.avail_out === 0) {
      return BS_FINISH_STARTED;
    }
    /***/
    return BS_FINISH_DONE;
  }
  if (s.last_lit) {
    /*** FLUSH_BLOCK(s, 0); ***/
    flush_block_only(s, false);
    if (s.strm.avail_out === 0) {
      return BS_NEED_MORE;
    }
    /***/
  }
  return BS_BLOCK_DONE;
}

/* Values for max_lazy_match, good_match and max_chain_length, depending on
 * the desired pack level (0..9). The values given below have been tuned to
 * exclude worst case performance for pathological files. Better values may be
 * found for specific files.
 */
class Config {
  good_length: any;
  max_lazy: any;
  nice_length: any;
  max_chain: any;
  func: any;
  constructor(
    good_length: any,
    max_lazy: any,
    nice_length: any,
    max_chain: any,
    func: any,
  ) {
    this.good_length = good_length;
    this.max_lazy = max_lazy;
    this.nice_length = nice_length;
    this.max_chain = max_chain;
    this.func = func;
  }
}

let configuration_table: any;

configuration_table = [
  /*      good lazy nice chain */
  new Config(0, 0, 0, 0, deflate_stored), /* 0 store only */
  new Config(4, 4, 8, 4, deflate_fast), /* 1 max speed, no lazy matches */
  new Config(4, 5, 16, 8, deflate_fast), /* 2 */
  new Config(4, 6, 32, 32, deflate_fast), /* 3 */

  new Config(4, 4, 16, 16, deflate_slow), /* 4 lazy matches */
  new Config(8, 16, 32, 32, deflate_slow), /* 5 */
  new Config(8, 16, 128, 128, deflate_slow), /* 6 */
  new Config(8, 32, 128, 256, deflate_slow), /* 7 */
  new Config(32, 128, 258, 1024, deflate_slow), /* 8 */
  new Config(32, 258, 258, 4096, deflate_slow), /* 9 max compression */
];

/* ===========================================================================
 * Initialize the "longest match" routines for a new zlib stream
 */
function lm_init(s: any) {
  s.window_size = 2 * s.w_size;

  /*** CLEAR_HASH(s); ***/
  zero(s.head); // Fill with NIL (= 0);

  /* Set the default configuration parameters:
   */
  s.max_lazy_match = configuration_table[s.level].max_lazy;
  s.good_match = configuration_table[s.level].good_length;
  s.nice_match = configuration_table[s.level].nice_length;
  s.max_chain_length = configuration_table[s.level].max_chain;

  s.strstart = 0;
  s.block_start = 0;
  s.lookahead = 0;
  s.insert = 0;
  s.match_length = s.prev_length = MIN_MATCH - 1;
  s.match_available = 0;
  s.ins_h = 0;
}

export class DeflateState {
  strm: ZStream | null = null; /* pointer back to this zlib stream */
  status = 0; /* as the name implies */
  pending_buf: any = null; /* output still pending */
  pending_buf_size = 0; /* size of pending_buf */
  pending_out = 0; /* next pending byte to output to the stream */
  pending = 0; /* nb of bytes in the pending buffer */
  wrap = 0; /* bit 0 true for zlib, bit 1 true for gzip */
  gzhead: Header | null = null; /* gzip header information to write */
  gzindex = 0; /* where in extra, name, or comment */
  method = Z_DEFLATED; /* can only be DEFLATED */
  last_flush = -1; /* value of flush param for previous deflate call */

  w_size = 0; /* LZ77 window size (32K by default) */
  w_bits = 0; /* log2(w_size)  (8..16) */
  w_mask = 0; /* w_size - 1 */

  window: any = null;
  /* Sliding window. Input bytes are read into the second half of the window,
   * and move to the first half later to keep a dictionary of at least wSize
   * bytes. With this organization, matches are limited to a distance of
   * wSize-MAX_MATCH bytes, but this ensures that IO is always
   * performed with a length multiple of the block size.
   */

  window_size = 0;
  /* Actual size of window: 2*wSize, except when the user input buffer
   * is directly used as sliding window.
   */

  prev: any = null;
  /* Link to older string with same hash index. To limit the size of this
   * array to 64K, this link is maintained only for the last 32K strings.
   * An index in this array is thus a window index modulo 32K.
   */

  head: any = null; /* Heads of the hash chains or NIL. */

  ins_h = 0; /* hash index of string to be inserted */
  hash_size = 0; /* number of elements in hash table */
  hash_bits = 0; /* log2(hash_size) */
  hash_mask = 0; /* hash_size-1 */

  hash_shift = 0;
  /* Number of bits by which ins_h must be shifted at each input
   * step. It must be such that after MIN_MATCH steps, the oldest
   * byte no longer takes part in the hash key, that is:
   *   hash_shift * MIN_MATCH >= hash_bits
   */

  block_start = 0;
  /* Window position at the beginning of the current output block. Gets
   * negative when the window is moved backwards.
   */

  match_length = 0; /* length of best match */
  prev_match = 0; /* previous match */
  match_available = 0; /* set if previous match exists */
  strstart = 0; /* start of string to insert */
  match_start = 0; /* start of matching string */
  lookahead = 0; /* number of valid bytes ahead in window */

  prev_length = 0;
  /* Length of the best match at previous step. Matches not greater than this
   * are discarded. This is used in the lazy match evaluation.
   */

  max_chain_length = 0;
  /* To speed up deflation, hash chains are never searched beyond this
   * length.  A higher limit improves compression ratio but degrades the
   * speed.
   */

  max_lazy_match = 0;
  /* Attempt to find a better match only when the current match is strictly
   * smaller than this value. This mechanism is used only for compression
   * levels >= 4.
   */
  // That's alias to max_lazy_match, don't use directly
  //this.max_insert_length = 0;
  /* Insert new strings in the hash table only if the match length is not
   * greater than this length. This saves time but degrades compression.
   * max_insert_length is used only for compression levels <= 3.
   */

  level = 0; /* compression level (1..9) */
  strategy = 0; /* favor or force Huffman coding*/

  good_match = 0;
  /* Use a faster search when the previous match is longer than this */

  nice_match = 0; /* Stop searching when current match exceeds this */

  /* used by trees.c: */

  /* Didn't use ct_data typedef below to suppress compiler warning */

  // struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
  // struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
  // struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */

  // Use flat array of DOUBLE size, with interleaved fata,
  // because JS does not support effective
  dyn_ltree = new Uint16Array(HEAP_SIZE * 2);
  dyn_dtree = new Uint16Array((2 * D_CODES + 1) * 2);
  bl_tree = new Uint16Array((2 * BL_CODES + 1) * 2);

  l_desc = null; /* desc. for literal tree */
  d_desc = null; /* desc. for distance tree */
  bl_desc = null; /* desc. for bit length tree */

  //ush bl_count[MAX_BITS+1];
  bl_count = new Uint16Array(MAX_BITS + 1);
  /* number of codes at each bit length for an optimal tree */

  //int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
  heap = new Uint16Array(
    2 * L_CODES + 1,
  ); /* heap used to build the Huffman trees */

  heap_len = 0; /* number of elements in the heap */
  heap_max = 0; /* element of largest frequency */
  /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
   * The same heap array is used to build all trees.
   */

  depth = new Uint16Array(2 * L_CODES + 1); //uch depth[2*L_CODES+1];

  /* Depth of each subtree used as tie breaker for trees of equal frequency
   */

  l_buf = 0; /* buffer index for literals or lengths */

  lit_bufsize = 0;
  /* Size of match buffer for literals/lengths.  There are 4 reasons for
   * limiting lit_bufsize to 64K:
   *   - frequencies can be kept in 16 bit counters
   *   - if compression is not successful for the first block, all input
   *     data is still in the window so we can still emit a stored block even
   *     when input comes from standard input.  (This can also be done for
   *     all blocks if lit_bufsize is not greater than 32K.)
   *   - if compression is not successful for a file smaller than 64K, we can
   *     even emit a stored file instead of a stored block (saving 5 bytes).
   *     This is applicable only for zip (not gzip or zlib).
   *   - creating new Huffman trees less frequently may not provide fast
   *     adaptation to changes in the input data statistics. (Take for
   *     example a binary file with poorly compressible code followed by
   *     a highly compressible string table.) Smaller buffer sizes give
   *     fast adaptation but have of course the overhead of transmitting
   *     trees more frequently.
   *   - I can't count above 4
   */

  last_lit = 0; /* running index in l_buf */

  d_buf = 0;
  /* Buffer index for distances. To simplify the code, d_buf and l_buf have
   * the same number of elements. To use different lengths, an extra flag
   * array would be necessary.
   */

  opt_len = 0; /* bit length of current block with optimal trees */
  static_len = 0; /* bit length of current block with static trees */
  matches = 0; /* number of string matches in current block */
  insert = 0; /* bytes at end of window left to insert */

  bi_buf = 0;
  /* Output buffer. bits are inserted starting at the bottom (least
   * significant bits).
   */
  bi_valid = 0;
  /* Number of valid bits in bi_buf.  All bits above the last valid bit
   * are always zero.
   */

  // Used for window memory init. We safely ignore it for JS. That makes
  // sense only for pointers and memory check tools.
  //this.high_water = 0;
  /* High water mark offset in window for initialized bytes -- bytes above
   * this are set to zero in order to avoid memory check warnings when
   * longest match routines access bytes past the input.  This is then
   * updated to the new high water mark.
   */
  constructor() {
    zero(this.dyn_ltree);
    zero(this.dyn_dtree);
    zero(this.bl_tree);
    zero(this.heap);
    zero(this.depth);
  }
}

function deflateResetKeep(strm: ZStream) {
  let s;

  if (!strm || !strm.state) {
    return err(strm, STATUS.Z_STREAM_ERROR.toString() as CODE);
  }

  strm.total_in = strm.total_out = 0;
  strm.data_type = Z_UNKNOWN;

  s = strm.state;
  s.pending = 0;
  s.pending_out = 0;

  if (s.wrap < 0) {
    s.wrap = -s.wrap;
    /* was made negative by deflate(..., Z_FINISH); */
  }
  s.status = (s.wrap ? INIT_STATE : BUSY_STATE);
  strm.adler = (s.wrap === 2)
    ? 0 // crc32(0, Z_NULL, 0)
    : 1; // adler32(0, Z_NULL, 0)
  s.last_flush = STATUS.Z_NO_FLUSH;
  trees._tr_init(s);
  return Z_OK;
}

function deflateReset(strm: ZStream) {
  let ret = deflateResetKeep(strm);
  if (ret === Z_OK) {
    lm_init(strm.state);
  }
  return ret;
}

export function deflateSetHeader(strm: ZStream, head: Header) {
  if (!strm || !strm.state) return Z_STREAM_ERROR;
  if (strm.state.wrap !== 2) return Z_STREAM_ERROR;
  strm.state.gzhead = head;
  return Z_OK;
}

export function deflateInit2(
  strm: ZStream,
  level: number,
  method: number,
  windowBits: number,
  memLevel: number,
  strategy: number,
): CODE {
  if (!strm) { // === Z_NULL
    return STATUS.Z_STREAM_ERROR as CODE;
  }
  let wrap = 1;

  if (level === Z_DEFAULT_COMPRESSION) {
    level = 6;
  }

  if (windowBits < 0) {
    /* suppress zlib wrapper */
    wrap = 0;
    windowBits = -windowBits;
  } else if (windowBits > 15) {
    wrap = 2; /* write gzip wrapper instead */
    windowBits -= 16;
  }

  if (
    memLevel < 1 || memLevel > MAX_MEM_LEVEL || method !== Z_DEFLATED ||
    windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
    strategy < 0 || strategy > Z_FIXED
  ) {
    return err(strm, STATUS.Z_STREAM_ERROR.toString() as CODE);
  }

  if (windowBits === 8) {
    windowBits = 9;
  }
  /* until 256-byte window bug fixed */

  let s = new DeflateState();

  strm.state = s;
  s.strm = strm;

  s.wrap = wrap;
  s.gzhead = null;
  s.w_bits = windowBits;
  s.w_size = 1 << s.w_bits;
  s.w_mask = s.w_size - 1;

  s.hash_bits = memLevel + 7;
  s.hash_size = 1 << s.hash_bits;
  s.hash_mask = s.hash_size - 1;
  s.hash_shift = ~~((s.hash_bits + MIN_MATCH - 1) / MIN_MATCH);

  s.window = new Uint8Array(s.w_size * 2);
  s.head = new Uint16Array(s.hash_size);
  s.prev = new Uint16Array(s.w_size);

  // Don't need mem init magic for JS.
  //s.high_water = 0;  /* nothing written to s->window yet */

  s.lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */

  s.pending_buf_size = s.lit_bufsize * 4;

  //overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
  //s->pending_buf = (uchf *) overlay;
  s.pending_buf = new Uint8Array(s.pending_buf_size);

  // It is offset from `s.pending_buf` (size is `s.lit_bufsize * 2`)
  //s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
  s.d_buf = 1 * s.lit_bufsize;

  //s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
  s.l_buf = (1 + 2) * s.lit_bufsize;

  s.level = level;
  s.strategy = strategy;
  s.method = method;

  return deflateReset(strm);
}

function deflateInit(strm: ZStream, level: number) {
  return deflateInit2(
    strm,
    level,
    Z_DEFLATED,
    MAX_WBITS,
    DEF_MEM_LEVEL,
    Z_DEFAULT_STRATEGY,
  );
}

export function deflate(strm: ZStream, flush: number) {
  let old_flush, s;
  let beg, val; // for gzip header write only

  if (
    !strm || !strm.state ||
    flush > STATUS.Z_BLOCK || flush < 0
  ) {
    return strm ? err(strm, STATUS.Z_STREAM_ERROR as CODE) : Z_STREAM_ERROR;
  }

  s = strm.state;

  if (
    !strm.output ||
    (!strm.input && strm.avail_in !== 0) ||
    (s.status === FINISH_STATE && flush !== STATUS.Z_FINISH)
  ) {
    return err(
      strm,
      (strm.avail_out === 0
        ? STATUS.Z_BUF_ERROR
        : STATUS.Z_STREAM_ERROR) as CODE,
    );
  }

  s.strm = strm; /* just in case */
  old_flush = s.last_flush;
  s.last_flush = flush;

  /* Write the header */
  if (s.status === INIT_STATE) {
    if (s.wrap === 2) { // GZIP header
      strm.adler = 0; //crc32(0L, Z_NULL, 0);
      put_byte(s, 31);
      put_byte(s, 139);
      put_byte(s, 8);
      if (!s.gzhead) { // s->gzhead == Z_NULL
        put_byte(s, 0);
        put_byte(s, 0);
        put_byte(s, 0);
        put_byte(s, 0);
        put_byte(s, 0);
        put_byte(
          s,
          s.level === 9
            ? 2
            : (s.strategy >= Z_HUFFMAN_ONLY || s.level < 2 ? 4 : 0),
        );
        put_byte(s, OS_CODE);
        s.status = BUSY_STATE;
      } else {
        put_byte(
          s,
          (s.gzhead.text ? 1 : 0) +
            (s.gzhead.hcrc ? 2 : 0) +
            (!s.gzhead.extra ? 0 : 4) +
            (!s.gzhead.name ? 0 : 8) +
            (!s.gzhead.comment ? 0 : 16),
        );
        put_byte(s, s.gzhead.time & 0xff);
        put_byte(s, (s.gzhead.time >> 8) & 0xff);
        put_byte(s, (s.gzhead.time >> 16) & 0xff);
        put_byte(s, (s.gzhead.time >> 24) & 0xff);
        put_byte(
          s,
          s.level === 9
            ? 2
            : (s.strategy >= Z_HUFFMAN_ONLY || s.level < 2 ? 4 : 0),
        );
        put_byte(s, s.gzhead.os & 0xff);
        if (s.gzhead.extra && s.gzhead.extra.length) {
          put_byte(s, s.gzhead.extra.length & 0xff);
          put_byte(s, (s.gzhead.extra.length >> 8) & 0xff);
        }
        if (s.gzhead.hcrc) {
          strm.adler = crc32(strm.adler, s.pending_buf, s.pending, 0);
        }
        s.gzindex = 0;
        s.status = EXTRA_STATE;
      }
    } // DEFLATE header
    else {
      let header = (Z_DEFLATED + ((s.w_bits - 8) << 4)) << 8;
      let level_flags = -1;

      if (s.strategy >= Z_HUFFMAN_ONLY || s.level < 2) {
        level_flags = 0;
      } else if (s.level < 6) {
        level_flags = 1;
      } else if (s.level === 6) {
        level_flags = 2;
      } else {
        level_flags = 3;
      }
      header |= (level_flags << 6);
      if (s.strstart !== 0) header |= PRESET_DICT;
      header += 31 - (header % 31);

      s.status = BUSY_STATE;
      putShortMSB(s, header);

      /* Save the adler32 of the preset dictionary: */
      if (s.strstart !== 0) {
        putShortMSB(s, strm.adler >>> 16);
        putShortMSB(s, strm.adler & 0xffff);
      }
      strm.adler = 1; // adler32(0L, Z_NULL, 0);
    }
  }

  //#ifdef GZIP
  if (s.status === EXTRA_STATE) {
    if (s.gzhead!.extra /* != Z_NULL*/) {
      beg = s.pending; /* start of bytes to update crc */

      while (s.gzindex < (s.gzhead!.extra.length & 0xffff)) {
        if (s.pending === s.pending_buf_size) {
          if (s.gzhead!.hcrc && s.pending > beg) {
            strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
          }
          flush_pending(strm);
          beg = s.pending;
          if (s.pending === s.pending_buf_size) {
            break;
          }
        }
        put_byte(s, s.gzhead!.extra[s.gzindex] & 0xff);
        s.gzindex++;
      }
      if (s.gzhead!.hcrc && s.pending > beg) {
        strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
      }
      if (s.gzindex === s.gzhead!.extra.length) {
        s.gzindex = 0;
        s.status = NAME_STATE;
      }
    } else {
      s.status = NAME_STATE;
    }
  }
  if (s.status === NAME_STATE) {
    if (s.gzhead!.name /* != Z_NULL*/) {
      beg = s.pending; /* start of bytes to update crc */
      //int val;

      do {
        if (s.pending === s.pending_buf_size) {
          if (s.gzhead!.hcrc && s.pending > beg) {
            strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
          }
          flush_pending(strm);
          beg = s.pending;
          if (s.pending === s.pending_buf_size) {
            val = 1;
            break;
          }
        }
        // JS specific: little magic to add zero terminator to end of string
        if (s.gzindex < s.gzhead!.name.length) {
          val = s.gzhead!.name.charCodeAt(s.gzindex++) & 0xff;
        } else {
          val = 0;
        }
        put_byte(s, val);
      } while (val !== 0);

      if (s.gzhead!.hcrc && s.pending > beg) {
        strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
      }
      if (val === 0) {
        s.gzindex = 0;
        s.status = COMMENT_STATE;
      }
    } else {
      s.status = COMMENT_STATE;
    }
  }
  if (s.status === COMMENT_STATE) {
    if (s.gzhead!.comment /* != Z_NULL*/) {
      beg = s.pending; /* start of bytes to update crc */
      //int val;

      do {
        if (s.pending === s.pending_buf_size) {
          if (s.gzhead!.hcrc && s.pending > beg) {
            strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
          }
          flush_pending(strm);
          beg = s.pending;
          if (s.pending === s.pending_buf_size) {
            val = 1;
            break;
          }
        }
        // JS specific: little magic to add zero terminator to end of string
        if (s.gzindex < s.gzhead!.comment.length) {
          val = s.gzhead!.comment.charCodeAt(s.gzindex++) & 0xff;
        } else {
          val = 0;
        }
        put_byte(s, val);
      } while (val !== 0);

      if (s.gzhead!.hcrc && s.pending > beg) {
        strm.adler = crc32(strm.adler, s.pending_buf, s.pending - beg, beg);
      }
      if (val === 0) {
        s.status = HCRC_STATE;
      }
    } else {
      s.status = HCRC_STATE;
    }
  }
  if (s.status === HCRC_STATE) {
    if (s.gzhead!.hcrc) {
      if (s.pending + 2 > s.pending_buf_size) {
        flush_pending(strm);
      }
      if (s.pending + 2 <= s.pending_buf_size) {
        put_byte(s, strm.adler & 0xff);
        put_byte(s, (strm.adler >> 8) & 0xff);
        strm.adler = 0; //crc32(0L, Z_NULL, 0);
        s.status = BUSY_STATE;
      }
    } else {
      s.status = BUSY_STATE;
    }
  }
  //#endif

  /* Flush as much pending output as possible */
  if (s.pending !== 0) {
    flush_pending(strm);
    if (strm.avail_out === 0) {
      /* Since avail_out is 0, deflate will be called again with
       * more output space, but possibly with both pending and
       * avail_in equal to zero. There won't be anything to do,
       * but this is not an error situation so make sure we
       * return OK instead of BUF_ERROR at next call of deflate:
       */
      s.last_flush = -1;
      return Z_OK;
    }

    /* Make sure there is something to do and avoid duplicate consecutive
     * flushes. For repeated and useless calls with Z_FINISH, we keep
     * returning Z_STREAM_END instead of Z_BUF_ERROR.
     */
  } else if (
    strm.avail_in === 0 && rank(flush) <= rank(old_flush) &&
    flush !== STATUS.Z_FINISH
  ) {
    return err(strm, STATUS.Z_BUF_ERROR as CODE);
  }

  /* User must not provide more input after the first FINISH: */
  if (s.status === FINISH_STATE && strm.avail_in !== 0) {
    return err(strm, STATUS.Z_BUF_ERROR as CODE);
  }

  /* Start a new block or continue the current one.
   */
  if (
    strm.avail_in !== 0 || s.lookahead !== 0 ||
    (flush !== STATUS.Z_NO_FLUSH && s.status !== FINISH_STATE)
  ) {
    let bstate = (s.strategy === Z_HUFFMAN_ONLY)
      ? deflate_huff(s, flush)
      : (s.strategy === Z_RLE
        ? deflate_rle(s, flush)
        : configuration_table[s.level].func(s, flush));

    if (bstate === BS_FINISH_STARTED || bstate === BS_FINISH_DONE) {
      s.status = FINISH_STATE;
    }
    if (bstate === BS_NEED_MORE || bstate === BS_FINISH_STARTED) {
      if (strm.avail_out === 0) {
        s.last_flush = -1;
        /* avoid BUF_ERROR next call, see above */
      }
      return STATUS.Z_OK;
      /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
       * of deflate should use the same flush parameter to make sure
       * that the flush is complete. So we don't have to output an
       * empty block here, this will be done at next call. This also
       * ensures that for a very small output buffer, we emit at most
       * one empty block.
       */
    }
    if (bstate === BS_BLOCK_DONE) {
      if (flush === STATUS.Z_PARTIAL_FLUSH) {
        trees._tr_align(s);
      } else if (flush !== STATUS.Z_BLOCK) {
        /* FULL_FLUSH or SYNC_FLUSH */

        trees._tr_stored_block(s, 0, 0, false);
        /* For a full flush, this empty block will be recognized
         * as a special marker by inflate_sync().
         */
        if (flush === STATUS.Z_FULL_FLUSH) {
          /*** CLEAR_HASH(s); ***/
          /* forget history */
          zero(s.head!); // Fill with NIL (= 0);

          if (s.lookahead === 0) {
            s.strstart = 0;
            s.block_start = 0;
            s.insert = 0;
          }
        }
      }
      flush_pending(strm);
      if (strm.avail_out === 0) {
        s.last_flush = -1; /* avoid BUF_ERROR at next call, see above */
        return STATUS.Z_OK;
      }
    }
  }
  //Assert(strm->avail_out > 0, "bug2");
  //if (strm.avail_out <= 0) { throw new Error("bug2");}

  if (flush !== STATUS.Z_FINISH) return STATUS.Z_OK;
  if (s.wrap <= 0) return STATUS.Z_STREAM_END;

  /* Write the trailer */
  if (s.wrap === 2) {
    put_byte(s, strm.adler & 0xff);
    put_byte(s, (strm.adler >> 8) & 0xff);
    put_byte(s, (strm.adler >> 16) & 0xff);
    put_byte(s, (strm.adler >> 24) & 0xff);
    put_byte(s, strm.total_in & 0xff);
    put_byte(s, (strm.total_in >> 8) & 0xff);
    put_byte(s, (strm.total_in >> 16) & 0xff);
    put_byte(s, (strm.total_in >> 24) & 0xff);
  } else {
    putShortMSB(s, strm.adler >>> 16);
    putShortMSB(s, strm.adler & 0xffff);
  }

  flush_pending(strm);
  /* If avail_out is zero, the application will call deflate again
   * to flush the rest.
   */
  if (s.wrap > 0) s.wrap = -s.wrap;
  /* write the trailer only once! */
  return s.pending !== 0 ? Z_OK : Z_STREAM_END;
}

export function deflateEnd(strm: ZStream): any {
  let status;

  if (!strm /*== Z_NULL*/ || !strm.state /*== Z_NULL*/) {
    return Z_STREAM_ERROR;
  }

  status = strm.state.status;
  if (
    status !== INIT_STATE &&
    status !== EXTRA_STATE &&
    status !== NAME_STATE &&
    status !== COMMENT_STATE &&
    status !== HCRC_STATE &&
    status !== BUSY_STATE &&
    status !== FINISH_STATE
  ) {
    return err(strm, STATUS.Z_STREAM_ERROR as CODE);
  }

  strm.state = null;

  return status === BUSY_STATE ? err(strm, STATUS.Z_DATA_ERROR as CODE) : Z_OK;
}

/* =========================================================================
 * Initializes the compression dictionary from the given byte
 * sequence without producing any compressed output.
 */
export function deflateSetDictionary(
  strm: ZStream,
  dictionary: Uint8Array,
): any {
  let dictLength = dictionary.length;

  let s;
  let str, n;
  let wrap;
  let avail;
  let next;
  let input;
  let tmpDict;

  if (!strm /*== Z_NULL*/ || !strm.state /*== Z_NULL*/) {
    return Z_STREAM_ERROR;
  }

  s = strm.state;
  wrap = s.wrap;

  if (wrap === 2 || (wrap === 1 && s.status !== INIT_STATE) || s.lookahead) {
    return Z_STREAM_ERROR;
  }

  /* when using zlib wrappers, compute Adler-32 for provided dictionary */
  if (wrap === 1) {
    /* adler32(strm->adler, dictionary, dictLength); */
    strm.adler = adler32(strm.adler, dictionary, dictLength, 0);
  }

  s.wrap = 0; /* avoid computing Adler-32 in read_buf */

  /* if dictionary would fill window, just replace the history */
  if (dictLength >= s.w_size) {
    if (wrap === 0) {
      /* already empty otherwise */
      /*** CLEAR_HASH(s); ***/
      zero(s.head!); // Fill with NIL (= 0);
      s.strstart = 0;
      s.block_start = 0;
      s.insert = 0;
    }
    /* use the tail */
    // dictionary = dictionary.slice(dictLength - s.w_size);
    tmpDict = new Uint8Array(s.w_size);
    tmpDict.set(dictionary.subarray(dictLength - s.w_size, dictLength), 0);
    dictionary = tmpDict;
    dictLength = s.w_size;
  }
  /* insert dictionary into window and hash */
  avail = strm.avail_in;
  next = strm.next_in;
  input = strm.input;
  strm.avail_in = dictLength;
  strm.next_in = 0;
  strm.input = dictionary;
  fill_window(s);
  while (s.lookahead >= MIN_MATCH) {
    str = s.strstart;
    n = s.lookahead - (MIN_MATCH - 1);
    do {
      /* UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]); */
      s.ins_h = ((s.ins_h << s.hash_shift) ^ s.window![str + MIN_MATCH - 1]) &
        s.hash_mask;

      s.prev![str & s.w_mask] = s.head![s.ins_h];

      s.head![s.ins_h] = str;
      str++;
    } while (--n);
    s.strstart = str;
    s.lookahead = MIN_MATCH - 1;
    fill_window(s);
  }
  s.strstart += s.lookahead;
  s.block_start = s.strstart;
  s.insert = s.lookahead;
  s.lookahead = 0;
  s.match_length = s.prev_length = MIN_MATCH - 1;
  s.match_available = 0;
  strm.next_in = next;
  strm.input = input;
  strm.avail_in = avail;
  s.wrap = wrap;
  return Z_OK;
}