editor | ||
editor-elm | ||
node | ||
shared | ||
.dockerignore | ||
.gitignore | ||
.travis.yml | ||
Dockerfile | ||
editor.yaml | ||
LICENSE | ||
README.md | ||
stack.yaml | ||
vagrant-provision.sh | ||
Vagrantfile |
The Unison platform
Unison is a new programming platform, currently under active development. This repo contains the code for the Unison node backend (written in Haskell, lives in the node
directory, with source in src
), and the Unison editor.
If you're wondering what the project is about, you can get a glimpse with this video and post discussing the Unison semantic editor. The editor is just one piece of the overall platform, and there's updates and more info at unisonweb.org as well as background posts with additional context.
Since Unison isn't terribly useful in its current form, the rest of this README will focus on stuff that will be of interest for potential contributors, namely, how to build the code, and a brief tour of the (fairly small but action-packed) codebase. If you're just interested in the project and want to follow along with the progress, unisonweb.org is the place to go, or you can also say hello or lurk in the chat room.
Still here? All right then! Let's get to it.
A brief code tour
First, a bit of orientation. Here's the directory structure:
shared/
node/
editor/
editor-elm/
The shared/
directory has Haskell code that will be shared between the editor and node, the node/
directory has code specific to the node, and editor/
is the Unison editor, which also depends on shared/
but is compiled to Javascript via GHCJS. By writing the editor in Haskell, we can share code between the editor and Unison node backend. The editor-elm/
directory is an older Elm implementation of the Unison editor that is being phased out.
The dependencies are what you'd expect---shared/
has minimal external dependencies, and node/
and editor/
depend on shared
. Thus, it should be very obvious and explicit what code and external dependencies are going to be compiled to JS.
Building with Docker
The easiest way to compile Unison yourself is to use the provided Dockerfile. If you have Docker set up correctly, just run
$ git clone https://github.com/unisonweb/platform.git unisonweb
$ cd unisonweb
$ docker build -t unisonweb/platform .
which will take quite a while (~1h) the first time. It's much speedier on subsequent runs. When the above command finishes you can start Unison with
$ docker run -it -p 8080:8080 --name unisonweb --rm unisonweb/platform
Setting phasers to stun... (port 8080) (ctrl-c to quit)
and then browse to http://localhost:8080 to open the editor.
On Mac and Windows replace localhost
by the IP of your Docker VM.
Building using Stack
If these instructions don't work for you or are incomplete, please file an issue. Also, have a look at the Dockerfile if you are unsure about the steps to perform.
The build uses Stack. If you don't already have it installed, version 1.0.2 or later, follow the install instructions for your platform. Once that's done and the stack
executable is on your path, do:
$ git clone https://github.com/unisonweb/unison.git
$ cd unison
$ stack --version # make sure this returns 1.0.2 or later
$ stack build unison-node # build node executable
To build the editor, do:
# you may have to run `stack --stack-yaml editor.yaml setup` first
$ stack --stack-yaml editor.yaml build
The editor is built using GHCJS. If you encounter an issue about missing 'happy', you can try installing with stack install happy
, cabal install happy
or sudo apt-get install happy
if on ubuntu. Make sure that happy
ends up on your $PATH
(try doing happy --version
; it should report 1.19.5 or later) after install.
After stack build
completes successfully, you can symlink the generated Javascript files by performing a
$ ln -s $(stack path --local-install-root)/bin editor
You can run it by doing:
$ stack exec node
Setting phasers to stun... (port 8080) (ctrl-c to quit)
That last message is Scotty telling you it's running. That means you're good. Visit localhost:8080/
in a browser to see the editor (or just open up editor/editor.html
).
These instructions do not work on Windows as far as I know (this might be fixable, contact me if interested), but if you're on Windows or just prefer to build the code on a known-good VM, use the Vagrant box setup after reading through these instructions. If you go this route, you can still use your preferred text editor. The VM will have shared filesystem access to the directory where you've checked out the code.
A brief tour of the Haskell code
The Unison Haskell code, which has the language, its typechecker, and the node implementation, is split between shared/
and node/
. It's not actually much code right now, only about 3k lines!
Obviously, this number is going to go up over time, but right now, it's pretty bite-sized and (hopefully) easy enough to follow. Certainly not of the scale of something like GHC, which clocks in at over 135k LOC!
One brief note for orientation. Because of the split between shared/
and node/
, a module like Unison.Term
(in shared/
), which has the basic type and instances for JSON encoding/decoding, has a counterpart in node/
, Unison.Term.Extra
with things like binary serialization or hashing of Unison.Term
values. Logically, it would be nice to put all functionality in the Unison.Term
module, but binary serialization and hashing code isn't needed by the editor and we don't want to accidentally compile those libraries and code to JS or rely on tree-shaking to hopefully trim it out. Other .Extra
modules are analogous.
Now, where to begin? Everyone learns differently. You might prefer to read the code 'inside out' (or perhaps 'bottom up'), starting from the core language syntax tree and typechecker, then expanding out to where these get exposed to the outside world. If this route sounds appealing, here's a reasonable path:
Unison.Term
inshared/
is the module containing the definition for Unison language terms andUnison.Type
is the module containing the definition for Unison language types. Eventually, we'll addUnison.TypeDeclaration
.- In both
Term
andType
, the same pattern is used. Each defines a 'base functor' type,F a
, which is nonrecursive, and the actual thing we use is an abstract binding tree over this base functor, anABT F
.ABT
(for 'abstract binding tree') is defined inUnison.ABT
. If you aren't familiar with abstract binding trees, here is a nice blog post explaining one formulation of the idea, which inspired theUnison.ABT
module. A lot of operations on terms and types just delegate to genericABT
operations. Also seeUnison.ABT.Extra
. - The main interface to the typechecker is in
node/
inUnison.Typechecker
, and the implementation is inUnison.Typechecker.Context
. There isn't a lot of code here (about 500 LOC presently), since the typechecking algorithm is pretty simple. Unlike a unification-based typechecker, where the typechecking state is an unordered bag of unification constraints and higher-rank polymorphism is usually bolted on awkwardly later, Dunfield and Krishnaswami's algorithm keeps the typechecking state as a nicely tidy ordered context, represented as a regular list manipulated in a stack-like fashion, and the algorithm handles higher-rank polymorphism very cleanly. They've also extended this work to include features like GADTs, though this new algorithm hasn't been incorporated into Unison yet. - From here, you can move to
Unison.Node
, which defines the interface satisfied by the node,Unison.Node.Implementation
, containing a simple implementation of that interface, andUnison.NodeServer
, which just wraps the node API in an HTTP+JSON interface. - Lastly,
node/src/Node.hs
has the code which creates an instance of aUnison.NodeServer
. Thesrc/node/Node.hs
file also has the definition of the current Unison 'standard library'. The node logic is agnostic to the "standard library" chosen, so whatever creates an instance ofUnison.Node
has to supply it with the standard library it should use.
If instead, you'd rather work from the 'outside in' (or perhaps 'top down'), you could start with Unison.NodeServer
and work your way back the other direction to modules like Term
, Type
, and ABT
. Since the entire point of the node codebase is to expose an API over HTTP, Unison.NodeServer
will end up referencing directly or indirectly all the code in the node, and all the Unison language and typechecker.
That's all for now!
Appendix
Build instructions for Windows users or those who prefer to build code on a VM
If you're on Windows and would like to build the project, you can do so using the Vagrant box VM. You can also do this if you just prefer to develop using a VM. If you do this, you can still use your local text editor or IDE of choice for Haskell editing, since the filesystem is shared between the VM and your local machine.
Here are instructions for this route:
- Download and install Vagrant.
- Download and install VirtualBox. This is a free VM provider.
Once those are done, from the root directory of the project (the same directory as the Vagrantfile
file), do:
$ vagrant up
... lots of log output as the machine gets set up
Once it completes, you can do vagrant ssh
, then cd /vagrant
. Notice that the /vagrant
directory on the VM mirrors the root directory of your project. You can edit the code on your local machine, and use the the usual build instructions on the VM to compile and run the project on the VM!
Problems Building the Editor - Ubuntu
At least one user has reported problems when building the editor on a machine running Ubuntu 14.04.
-
If you encounter the following error:
Link error: “Cannot find -ltinfo”
, then you'll need to install thelibtinfo-dev
package with:$ sudo apt-get install libtinfo-dev
-
If you encounter an error like the following:
Unpacking GHCJS into <some-directory> ...Expected a single directory within unpacked <some-tar.gz-file>"
then you need to upgrade
stack
to at least version 1.0.5. -
If you get an error that contains:
The program 'happy' version >=1.17 is required but it could not be found.
then you'll need to install
happy
. Thisstack
bug seems to make it impossible to getstack
to buildhappy
. If this is the case for you, you should be able to install using apt:$ sudo apt-get install happy