This fixes +put:in so that it works without the correct jet. There's a
mismatch where the hoon code is wrong and the jet is correct, so that
when we try to run this on alternate interpreters which may not have the
+in jets, things won't work.
%leave over the network didn't work because we included the message type
in the wire from gall, so the duct for the initial %watch and the %leave
were different. We need to know the message type so we can route the
acknowledgment as %poke-ack, %watch-ack, or no-op.
This moves this piece of information to a piece of state, where we queue
up the message types per [duct wire]. Ames guarantees that
acknowledgments will come in order.
This also includes an easy state adapter. The more interesting part of
the upgrade is that we likely have outstanding subscriptions with the
old wire format. The disadvantage of storing information in wires is
that it can't be upgraded in +load. So, here we listen for updates on
the old wire format, and when we get them we kill the old subscription,
so that it will be recreated with the new wire format.
As an aside, this is a good example of what we mean when we say
subscriptions may be killed at any time, so apps must handle this case.
Finally, this fixes the "attributing" ship to ~zod for agent requests.
This information was ignored for agent requests, but including it causes
spurious duct mismatches.
We've seen issues where the message-num of the head of live.state is
less than current.state. When this happens, we continually try to
resend message n-1, but we throw away any acknowledgment for n-1 because
current.state is already n. This halts progress on that flow.
We don't know what causes us to get in this bad state, so this adds an
assert to the packet pump that we're in a good state, run every time
the packet pump is run. When this crashes, we can turn on |ames-verb
and hopefully identify the cause.
This also adds logic to +on-wake in the packet pump to not try to resend
any messages that have already been acknowledged. This is just to
rescue ships that currently have these stuck flows.
(Incidentally, I'd love to have a rr-style debugger for stuff like this.
Just run a command that says "replay my event log watching for this
specific condition and then stop and let me poke around".)
This is why basically all packets are going through the galaxies right
now. Most of the time, the flow right now is:
* talking to ~dopzod but don't know where it is, so ask ~zod to forward,
which it does
* ~dopzod responds both directly (on the origin lane) and through ~zod
* (if NAT, the direct response doesn't get back, but the one through
~zod does. Then you respond directly to ~dopzod because their lane
piggybacked on the response. ~dopzod responds both directly and
through ~zod, and the story picks up the same as if you weren't behind a
NAT)
* now you have a direct lane to ~dopzod, so all is well.
* now the duplicate response from ~dopzod through ~zod comes in (takes a
little longer because it's bouncing off ~zod), resetting your lane to
"provisional"
* since your lane is provisional, you send your next packet both
directly and through ~zod
* GOTO 2
This change says "if I already have a direct lane, don't overwrite it
with a provisional one". This way, the only way the direct lane can be
overwritten is if they stop responding on it (cleared on "not
responding; still trying").
I also added |- to +send-blob to make |ames-verb %rot less confusing.
Compare +mute and +mule. Those pass through scry, which doesn't allow us to
catch crashes due to blocking scry. If you intercept scry, you can't preserve
the type polymorphically. By monomorphizing, we are able to do so safely.
Compare +mute and +mule. Those pass through scry, which doesn't allow us to
catch crashes due to blocking scry. If you intercept scry, you can't preserve
the type polymorphically. By monomorphizing, we are able to do so safely.
This broke when %kick was handled by resubscribing on your own ship
because it processed the %kick before the %leave. For example, `@t`404
at the dojo would put the dojo in an unworkable state.
You want the %leave to be processed first because you can't do a
"resubscribe" in response to that.
Immediately useful for implemeting json `@rd` parsing, which is basically
`++royl-rd` minus pfix sig. The increased separation also allows for running
stuff like `(rash '3.22e-47' royl-rn:so)` from the dojo.
This adds syntax for running imps. For example:
-time ~s1
Runs the "time" imp with the argument ~s1. This blocks the terminal
until the imp has completed (backspace kills it, of course). You could
avoid blocking the terminal if you sacrifice the ability to use imps as
sources in more complex commands.
In keeping with this one-and-done view of imps, this also changes spider
to not use a live build of imps. This significantly reduces the amount
of uncertainty around imps -- spider will try exactly once to run your
imp, and if it fails it'll tell you. If you want to retry, that's up to
you.
Returns the target %zuse contract configuration to mainnet, and also
tweaks the 'arvo-ropsten' build to use %alef instead of %ames.
Also fixes a merge conflict artifact in nix/ops/default.nix.
This removes the %http-response special case from gall. In its place,
we implement a subscription regime with the following steps:
- Agent sends %connect to Eyre
- Eyre pokes agent with %handle-http-response, including unique eyre-id
- Agent passes %start-watching to Eyre with eyre-id and unique app-id
- Eyre subscribes to agent on /http-response/app-id
- Agent produces a %http-response-header fact followed by 0 or more
%http-response-data facts and possibly a %http-response-cancel fact
- Agent produces a %kick to close the subscription, which Eyre
interprets as completion of the message.
This works when there is data. There is currently a bug where if the
response has no data in total (as in the case of a naked 404), no
response will be sent.
This also includes lib/http-handler, which implements a convenient
interface for agents that want to respond immediately with all the data.
This lets them avoid carrying extra state to keep track of pending
requests.
This should really have access to your state and the ability to change
it. Perhaps a more minimalist design would be better: just keep track
of the requests, then hand it off to +on-watch when eyre is ready to
receive responses. It's not clear how to pass in the request data in
+on-watch.
For some reason Jael subscriptions aren't starting properly for many
people. Until we can get to the bottom of it, this sets everyone to
start listening directly to the chain.
This extends `gol` "backward-inference" typechecking to thread through
cores. Recall that `gol` is used exclusively for receiving more
specific error messages; these changes should have no effect on programs
which already compile successfully.
Before, this would type-fail on the second `|%`.
```
!:
^+ ^?
|%
++ foo *@ud
--
|%
++ foo
?: =(1 1)
2
%foo
--
```
With these changes, it gives a mint-nice at `%foo`. It will also give
you explicit errors if you have the wrong number/names of arms,
including which arms it expects.
This is becoming much more important with static gall, since it's the
first time we've used core subtyping so extensively and in userspace.
This extends `gol` "backward-inference" typechecking to thread through cores. Recall that `gol` is used exclusively for receiving more specific error messages; these changes should have no effect on programs which already compile successfully.
Before, this would type-fail on the second `|%`.
```
!:
^+ ^?
|%
++ foo *@ud
--
|%
++ foo
?: =(1 1)
2
%foo
--
```
With these changes, it gives a mint-nice at `%foo`. It will also give you explicit errors if you have the wrong number/names of arms, including which arms it expects.
This is becoming much more important with static gall, since it's the first time we've used core subtyping so extensively and in userspace.
We were updating our state and then using that when checking if the rift
had incremented. This would never be true, since we'd already set the
new state.
Fixes#1852 again
* eth-watcher-2: (21 commits)
eth: move existing chain requests into ethio
eth-watcher: refactor refresh rate to top of file
hook: add pool-group-hook for making invite groups
ethio: add +read-contract for chain state reading
zuse: add delegated-sending address
eth: move eth-watcher's request-rpc into ethio lib
gaze: make compile for latest eth-watcher
drum: start eth-watcher on boot
azimuth-tracker: remove deprecated generator
eth: implement azimuth-tracker using eth-watcher
eth-watcher: ensure logs always sent oldest-first
eth-watcher: allow peers to unconfigured watchdogs
eth-watcher: saner %watch behavior
eth-watcher: implement %clear poke
eth-watcher: store logs in state to implement peer
eth-watcher: move types into /sur file
eth-watcher: properly tag out-peer-data
eth-watcher: single update timer loop
eth-watcher: implement /block peek
eth: turn azimuth-tracker into eth-watcher
...
Signed-off-by: Jared Tobin <jared@tlon.io>
