`wezterm.pad_righ` in the example should be `wezterm.pad_right`.
There's another problem, shared with the pad_left page, that `"o "` is rendered in the HTML with just one space, collapsing the two spaces to one, which is very misleading given what the example for this function does. It needs to be in a `<pre>` tag rather than just a `<code>` tag, but I don't know how to fix that from markdown.
For fonts like Lucida Console on Windows which do not have a bold
variant, we were not synthesizing bold.
The reason was that the config-level "make bold" logic works by adding
200 to the weight which takes normal -> demibold, but the bold synthesis
logic is enabled only for bold and higher.
This commit changes the threshold for synthesis to demibold or higher.
refs: https://github.com/wez/wezterm/issues/2074
harfbuzz can return incomplete overlapping runs when it processes
text in unicode NFD. Add another check for the case where we've
accumulated the bytes in the range 0-12 and then harfbuzz returns
another range of 6-12. We coalesce the two together so that we can
pass the full unresolved sequence to the next fallback pass.
refs: https://github.com/wez/wezterm/issues/2032
This, along with the plumbing included here, allows specifying
the destination of the split (now you can specify top/left, whereas
previously it was limited to right/bottom), as well as the size
of the split, and also whether the split targets the node at the
top level of the tab rather than the active pane--that is referred
to as full-width in tmux terminology.
https://github.com/wez/wezterm/issues/578
Invalid option names, or values that evaluate as nil (such as the `foo`
above: that's treated as a global variable reference, but `foo` isn't a
defined global and evaluates as `nil`) will now cause the program
startup to error out with an actionable error message.
Previously, the invalid config name would generate a warning, and the
invalid value would silently have no effect as it has the same effect as
omitting the named value and leaving it as its default value.
I think these cases should both immediately error out and stop
further processing, so that's what we're doing.
This commit also adds support for adding:
```
#[dynamic(deprecated = "use newer option instead")]
pub some_config_value: bool,
```
but not options currently use this.
To do this, we split `Pattern` into the underlying pattern for the mux
layer (which is part of the codec), and another for the config layer,
so that we can specify this new mode.
At the gui layer, we translate the selection variant into the actual
selection text and map it to the mux Pattern enum.
When taking the selection text, we restrict it to just the first line.
refs: https://github.com/wez/wezterm/issues/1912
Turn on multi-line mode by default, and improve the localpane
search function to collapse runs of trailing whitespace into
just a newline.
That allows:
```
./target/debug/wezterm -n --config 'quick_select_patterns={"foo$"}'
```
to match the first line from this, but not the second:
```
printf "foo\nfoobar\n"
```
and this to match both:
```
./target/debug/wezterm -n --config 'quick_select_patterns={"^foo"}'
```
refs: https://github.com/wez/wezterm/issues/2008
* Add support for drag and drop files in Windows
* Add two drag and drop filename quoting patterns (mainly) for Windows, change doc examples.
* Code style cleanup
* Improve Windows quoting pattern and rename DoubleQuoteAlways to WindowsAlwaysQuoted
* Improve special char finding for DroppedFileQuoting::Windows and fix doc.
The issue here was that we'd try to match this:
```
key_event RawKeyEvent { key: Char('t'), modifiers: ALT | LEFT_ALT, phys_code: Some(T), raw_code: 17, repeat_count: 1, key_is_down: true, handled: Handled(false) }
```
which has mods=`ALT|LEFT_ALT` against `ALT` and would fail.
We need to strip out the positional ALTs from the modifiers
in order to successfully match.
refs: https://github.com/wez/wezterm/issues/1958
This change causes key table activations to effectively layer
over prior key table activations.
This is necessary for the copy mode key assignment changes to
work.
refs: https://github.com/wez/wezterm/issues/993
I've bundled this into termwiz's UnicodeVersion type as that is
a similar concept that is already routed through to the appropriate
function.
refs: https://github.com/wez/wezterm/issues/1888
The launcher menu code to perform attaching has been generalized
into a key assignment action and reimplemented in terms of that
action.
A detach action has been added to disconnect and detach.
refs: https://github.com/wez/wezterm/issues/1874
This commit allows the currently active window to:
* Spawn a new tab in the active window (rather than spawning
a new window) to host the connection status
* Auto-close that connection UI tab (rather than the whole window)
when the window is no longer needed
* Pass the current window through to use as the primary window when
assigning remote window/tabs.
The net effect of this is that there are fewer transient windows,
and that it is easier to connect a set of domains to the active
workspace.
refs: https://github.com/wez/wezterm/issues/1874
We want to avoid normalizing control key presses; there were
two places where it was happening; one in our own code and
the other was in the xkeyboard mapping stuff itself.
refs: https://github.com/wez/wezterm/issues/1851
This persuades vim to set ttymouse=sgr by default.
We're carefully sitting below 279 which triggers
some queries for things that we don't respond to yet.
refs: https://github.com/wez/wezterm/issues/1825
Some versions of fontconfig classify some fonts as having charcell
spacing. We need to consider those as monospace as well.
refs: https://github.com/wez/wezterm/issues/1820
The keys section was way too big; this splits it up into more
manageable pieces, adds a nice flow chart to show how key events
are processed and adds an example of using the new key tables feature.
This is a bit more compact and easier to edit.
A downside is that the search engine highlight can break the diagram and
cause it to emit a syntax error.
A bit of a PITA, this commit:
* Introduces a DeferredKeyCode type that defers resolving a concrete
keycode
* Adds key_map_preference config which can be Mapped or Physical
* Key map building resolves the keycode using key_map_preference
* Default key assignments have been re-phrased in order to produce
DeferredKeyCodes
* User-specified keys without `mapped:` or `phys:` prefixes will
resolve according to key_map_preference
refs: https://github.com/wez/wezterm/issues/1788
refs: https://github.com/wez/wezterm/issues/1784
Previously, we'd create a clipboard handler associated with a GUI window
and take care to pass that down to the underlying Pane whenever we
spawned a new pane.
For the mux server, instead of being associated with a GUI window, the
clipboard was a special RemoteClipboard that would send a PDU through
to the client that spawned the window.
The bug here was that when that client went away, the clipboard for
that window was broken.
If the mux server was the built-in mux in a gui process this could
leave a tab without working OSC 52 clipboard support.
This commit restructures things so that the Mux is responsible for
assigning a clipboard handler that rephrases the clipboard event
as a MuxNotification.
Both the GUI frontend and the mux server dispatcher already listen
for mux notifications and translate those events into appropriate
operations on the system clipboard or Pdus to send to the client(s).
refs: #1790
After killing the remote pane, we no longer trigger the renderable
poll stuff that would detect that the pane was dead.
Let's speculatively set it to dead so that we don't get stuck with
stray tabs/panes.
https://github.com/wez/wezterm/issues/1752
There were a a couple of issues:
* `ImageData::hash` would re-hash the image on every call, and this was
called for every cell that comprised an image on the mux server side
* `SerializedLine` needed to understand how to remove the `Arc<ImageData>`
image attachments so that we didn't serialize a complete copy of the
image per cell that comprised the image.
A new RPC was introduced to attempt to fetch `ImageData` given its
content hash and pane, row and cell index as a hint to locate it.
A client side LRU of content hash to `ImageData` is used to avoid
issuing repeat calls to that new RPC.
refs: #1237
