Create a list of command definitions to hold the default key
assignments.
That list has more metadata, such as a brief and longer human
readable description of the purpose, and allows for (in the
future) reasoning about the context where the command is valid,
as well as providing more information when rendering in the
launcher menu.
refs: https://github.com/wez/wezterm/issues/1485
The heart of the issue here was due to the window-reuse logic that
tries to reuse a GUI window that is no longer associated with a mux
window.
Each GUI window subscribes to the mux for mux events, but it filters
according to is understanding of the mux_window_id that it is associated
with.
The GUI frontend maintains an mapping of GUI and mux window so that it
knows when to reuse a GUI window and when to close it.
When connecting to a remote mux, wezterm spawns a temporary connection
progress window. Once connected, workspace reconiliation is triggered
and decides that this window can be used for something else.
As part of workspace reconciliation, this mapping can be adjusted and
the frontend will notify a GUI window that its mux window has changed.
However, that updated mux window was not visible to the mux notification
subscription so the effect was that a variety of notifications were
effectively ignored, including updates from a remote mux when the output
was changed.
To make matters worse, the workspace reconciliation could "double-tap"
window creation and create excess windows only to later realize they
weren't needed and close them out again.
This commit addresses both of these concerns.
refs: #1841
refs: #1814
We're now capable of remembering an alpha value for everything
in the palette and the main window theme, but not the tab bar theme.
Whether the alpha is correctly respected at render time is a different
story!
refs: #1835
The bug here was that each paint call in a window would update
the focus state of its panes to reflect the one that had focus.
However, it didn't account for the actual window focus; it would
just assume that it was focused.
The result was that the perceived focus would alternate between each of
the windows in the wezterm process, and if you were running an
application that had enabled focus tracking, those events could cause a
repaint and drive up the CPU utilization.
This commit addresses that by gating the focus update to only occur
when we have the focus, and for extra safety, avoid generating focus
events at the terminal layer if the new state matches the current state.
refs: https://github.com/wez/wezterm/issues/1838
I wanted to use the Target::Pipe feature of env_logger so that we could
log to a log file as well as stderr, but it just doesn't work
(https://github.com/env-logger-rs/env_logger/issues/208).
Since we were already composing over the top of the logger in order
to capture data for our ringlog, this commit embraces that and makes
our logger responsible for both stderr and log file printing.
Thankfully, we can use the filter parsing code from env_logger to
avoid having to get too crazy with this.
Logs are stored in the runtime directory and look something like:
/run/user/1000/wezterm/wezterm-gui-log-596324.txt
Logs are collected on all platforms.
There isn't currently a thing to clean up logs.
Go directly to the underlying env_logger crate, as pretty_env_logger
hasn't been updated in some time, and I'd like to be able to redirect
the log output to a file more directly, and that feature is in a newer
version of the env logger than pretty_env_logger was pulling in.
This is definitely in the band-aid category, but two issues have
mentioned the AA in custom block glyphs recently.
This commit adds an `anti_alias_custom_block_glyphs` option that can be
set to false to prevent the custom block glyphs from enabling AA.
I think a better long term fix would be some kind of hinting to avoid
the degenerate AA case, but when I made an enquiry about this class of
issue in tiny skia in the past, the author didn't want to diverge from
skia-compatible behavior, so I think we'd need to find (or build!) an
alternative rasterizer for these path instructions.
refs: https://github.com/wez/wezterm/issues/1753
refs: #1817
To fix this correctly, the mux protocol would need to have some
special cases for talk to a gui server implementation, and we don't
have those today.
refs: #1794
The glium IncompatibleOpenGl Display doesn't include any of the
useful context to explain what the issue was, so this commit
renders the error both in human friendly and Debug form to
see if we can understand more about what is happening.
refs: https://github.com/wez/wezterm/issues/1813
* gui: improve mouse text selection
* implement mouse press capture between the terminal and UI, so when you
start selecting text from the terminal the tabs won't activate and
vice-versa
* selecting from the top and bottom lines won't scroll the viewport
anymore, it will only scroll if the mouse is moved out of line bounds
* change cell selection so that it behaves like text selection usually
does in other popular software
refs: https://github.com/wez/wezterm/issues/1199
refs: https://github.com/wez/wezterm/issues/1386
refs: https://github.com/wez/wezterm/issues/354
`ActivateKeyTable` pushes a new named key table entry onto the stack.
It has some parameters:
* name - required; the name of a entry in `key_tables` that should be
activated.
* timeout_milliseconds - how long the entry should remain active.
When this duration elapses, the entry will pop itself from the
stack. If omitted, the entry will not pop itself due to time.
* one_shot - if true (or omitted; true is default), the entry will pop
itself after one use. If false the entry will not pop itself after use.
But note that if timeout_milliseconds is set then it may pop itself
due to time.
* replace_current - if true, will pop the current stack entry before
activating the current entry. Most useful when combined with some
other one_shot=false activation.
`PopKeyTable` explicitly pops the top of the key table stack.
Most useful with `one_shot=false` activations.
`ClearKeyTableStack` clears the key table stack. Most useful with
`one_shot=false` activations.
```
local wezterm = require 'wezterm';
wezterm.on("update-right-status", function(window, pane)
local name = window:active_key_table()
if name then
name = "TABLE: " .. name
end
window:set_right_status(name or "")
end);
return {
debug_key_events = true,
keys = {
-- Activate the "woot" table as a one-shot with
-- a 2 second timeout, after which it will restore
-- the default table.
{
key="a", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
timeout_milliseconds=2000,
}
}
},
-- Activate the "woot" table.
-- The table will remain active until explicitly popped
-- by the `PopKeyTable` action. See the Escape binding below!
{
key="b", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
one_shot = false,
}
}
},
-- Activate the "woot" table as a one-shot with
-- no timeout. It will remain active until a key is pressed,
-- after which is will restore the default table.
{
key="c", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
}
}
},
},
key_tables = {
woot = {
{key="a", action=wezterm.action{SendString="woot"}},
{key="Escape", action="PopKeyTable"},
},
},
}
```
This commit introduces a new `key_tables` config option that allows
defining named groups of key assignments, but that have no effect yet.
To support this change, the InputMap type has been adjusted to allow
for the idea that multiple tables can exist.
refs: https://github.com/wez/wezterm/discussions/1812
The gist of the issue is that when setting eg: scale=1.2 to draw
a larger CJK glyph, it is drawn at the same descender level, which
makes it more likely to leave the top of the cell.
This commit adjusts the y position by the difference between the
original and the scaled descender so that is less likely to cause
problems.
refs: https://github.com/wez/wezterm/issues/1803
This is mostly a refactoring: pulling out the discrete width/height from
the `new_window` method and preparing to pass down x/y coords as well.
The types are expressed as Dimension so that screen relative sizes could
be expressed in the future... once we know how to obtain that
information on each platform.
refs: https://github.com/wez/wezterm/issues/1794
The tab bar height could vary by a couple of pixels depending on the
text shown inside it, which results in visual jitter as the title bar
changes.
Avoid that: always return our constant reserved amount of space for the
tab bar, even if it means that there are a couple of pixels "wasted".
cc: @davidrios
A bit of a PITA, this commit:
* Introduces a DeferredKeyCode type that defers resolving a concrete
keycode
* Adds key_map_preference config which can be Mapped or Physical
* Key map building resolves the keycode using key_map_preference
* Default key assignments have been re-phrased in order to produce
DeferredKeyCodes
* User-specified keys without `mapped:` or `phys:` prefixes will
resolve according to key_map_preference
refs: https://github.com/wez/wezterm/issues/1788
refs: https://github.com/wez/wezterm/issues/1784
Previously, we'd create a clipboard handler associated with a GUI window
and take care to pass that down to the underlying Pane whenever we
spawned a new pane.
For the mux server, instead of being associated with a GUI window, the
clipboard was a special RemoteClipboard that would send a PDU through
to the client that spawned the window.
The bug here was that when that client went away, the clipboard for
that window was broken.
If the mux server was the built-in mux in a gui process this could
leave a tab without working OSC 52 clipboard support.
This commit restructures things so that the Mux is responsible for
assigning a clipboard handler that rephrases the clipboard event
as a MuxNotification.
Both the GUI frontend and the mux server dispatcher already listen
for mux notifications and translate those events into appropriate
operations on the system clipboard or Pdus to send to the client(s).
refs: #1790
In https://github.com/wez/wezterm/pull/1779#issuecomment-1082058134 we
discuss a weird case where the tab bar height is computed as 0 and then
gets stuck at 0.
What's happening is that the initial `TabBarState::default()` value has
no items yet, and `build_fancy_tab` generates an area that occupies 0
pixels. This computed element is cached, and then the height from that
is cached.
When `invalidate_fancy_tab` is called, it didn't invalidate the cached
height and the resultant metrics were wonky.
One possible fix for this was to also invalidate the cached height,
but since that height is already stored in the built fancy tab,
we can remove that derived-cached value in favor of just passing
down the value.
refs: https://github.com/wez/wezterm/pull/1779
- Simplify scroll thumb calculations
- Correct thumb position when dragging with mouse
- Support border OS parameters
- Use usize for OS borders, to explicitly only accept positive integers
- Get correct tab height when using fancy tab bar
- Correctly draw depending on tab bar position
- Adjust minimum thumb size to be 1/2 of a cell height, so it has consistent size across platforms and screen densities
Fixes#1525
The condition should be: dpi-changed && (close-enough-stuff)
but was (dpi-changed && (some-close-enough-stuff)) ||
(other-close-enough-stuff).
The net result was toggling non-native full screen on macos could
falsely try to do scale change handling even though the dpi was
unchanged, because the window resized by only a couple of pixels.
Flesh out the get_os_parameters impl for macOS. When running on a
system that provides `NSScreen::safeAreaInsets`, use that to determine
the border required to avoid the "notch" on certain models of mac.
In the GUI layer: when the os parameters include a border, adjust
the render position to account for it.
This is a bit of a speculative change, as I don't have a mac with
a notch.
refs: https://github.com/wez/wezterm/issues/1737
