The server-side ownership of the palette is a stumbling block for
many users, so let's fix it.
This commit allows the client to pass its configured palette to
the server when it connects, and when the config is changed.
That palette takes precedence over the palette from the server config.
However, if the remote application uses any escape sequences that
redefine the color palette, the color palette that was active at
that point in time is forked and use as the basis, and will remain
the active palette until the palette is reset via escape sequences.
refs: https://github.com/wez/wezterm/issues/2686
refs: https://github.com/wez/wezterm/issues/3397
This commit causes the mux to generate a PaneFocused notification
when the active pane is changed.
The mux server will forward that as a unilateral PDU to connected
clients.
The clientpane implementation will handle that by applying the
same state to the local mux.
refs: #2863
Threads through a GuiPosition from mux window creation to allow it to be
used when the corresponding gui window is created.
SpawnCommand now has an optional position field to use for that purpose.
```lua
wezterm.mux.spawn_window {
position = {
x = 10,
y = 300,
-- Optional origin to use for x and y.
-- Possible values:
-- * "ScreenCoordinateSystem" (this is the default)
-- * "MainScreen" (the primary or main screen)
-- * "ActiveScreen" (whichever screen hosts the active/focused window)
-- * {Named="HDMI-1"} - uses a screen by name. See wezterm.gui.screens()
-- origin = "ScreenCoordinateSystem"
},
}
```
refs: https://github.com/wez/wezterm/issues/2976
This allows removing a bunch of unwrap/expect calls.
However, my primary motive was to replace the cases where we used
Mux::get() == None to indicate that we were not on the main thread.
A separate API has been added to test for that explicitly rather than
implicitly.
* Expose `activate-pane-direction` cli command
Add a new subcommand for `wezterm cli` called `activate-pane-direction`.
It allows switching the active pane in the current tab in the given
direction.
* Bump codec version
* Replace boolean flags with a single direction arg
* Run cargo fmt
Since the initial attach is async, we'd create the window at the
default/initial size and then never reconcile the size of the remote
tabs once they'd attached.
This commit introduces an event that allows the gui window to do that.
The action that it takes is to take the max width and height between
its current size and the size of a newly added tab and resizes to
that new size, if it changed.
refs: https://github.com/wez/wezterm/issues/2133
refs: https://github.com/wez/wezterm/issues/2351
The recent work on the scrollback made it easier to constrain the
search region, so expose those parameters to the Pane::search
interface and to the mux protocol.
Use those new parameters to constrain quickselect search to
1000 rows above and below the current viewport by default, and
add a new parameter to QuickSelectArgs that allows overriding that
range.
A follow-up commit could make the search/copy overlay issue a series
of searches in chunks so that it avoids blocking the UI when
searching very large scrollback.
refs: https://github.com/wez/wezterm/pull/1317
This commit allows for the SplitPane internal action to use the
pane id of an existing pane as the source of the pane to be added
in the new split target, rather than spawning a new command.
This can be used to move a pane from one tab to another, and is
analagous to tmux's `join-pane` command.
refs: https://github.com/wez/wezterm/discussions/2043
refs: https://github.com/wez/wezterm/issues/1253
This, along with the plumbing included here, allows specifying
the destination of the split (now you can specify top/left, whereas
previously it was limited to right/bottom), as well as the size
of the split, and also whether the split targets the node at the
top level of the tab rather than the active pane--that is referred
to as full-width in tmux terminology.
https://github.com/wez/wezterm/issues/578
Use some heuristics to verify the data that is about to be parsed;
this can help to detect eg: data being output to stdout prior
to us sending any encoded data to the remote mux.
In addition, add a timeout to help avoid waiting forever in
the case that we didn't detect a problem.
refs: https://github.com/wez/wezterm/issues/1860
Previously, we'd create a clipboard handler associated with a GUI window
and take care to pass that down to the underlying Pane whenever we
spawned a new pane.
For the mux server, instead of being associated with a GUI window, the
clipboard was a special RemoteClipboard that would send a PDU through
to the client that spawned the window.
The bug here was that when that client went away, the clipboard for
that window was broken.
If the mux server was the built-in mux in a gui process this could
leave a tab without working OSC 52 clipboard support.
This commit restructures things so that the Mux is responsible for
assigning a clipboard handler that rephrases the clipboard event
as a MuxNotification.
Both the GUI frontend and the mux server dispatcher already listen
for mux notifications and translate those events into appropriate
operations on the system clipboard or Pdus to send to the client(s).
refs: #1790
There were a a couple of issues:
* `ImageData::hash` would re-hash the image on every call, and this was
called for every cell that comprised an image on the mux server side
* `SerializedLine` needed to understand how to remove the `Arc<ImageData>`
image attachments so that we didn't serialize a complete copy of the
image per cell that comprised the image.
A new RPC was introduced to attempt to fetch `ImageData` given its
content hash and pane, row and cell index as a hint to locate it.
A client side LRU of content hash to `ImageData` is used to avoid
issuing repeat calls to that new RPC.
refs: #1237
wezterm cli spawn, and wezterm cli split-pane can use this information
to pick a default for the pane id when invoked from outside of wezterm.
refs: https://github.com/wez/wezterm/issues/1531
This commit does two related things, from opposite ends of the spectrum:
* Sets the sticky bit on pid files and unix sockets to avoid tmpwatch
deleting them in cleanup scenarios
* Falls back to looking at the changed time if the filesystem doesn't
support reporting creation time when wezterm does its own liveness
and cleanup checks for unix domain sockets in the runtime dir
* Allow any wezterm instance to perform that cleanup
refs: #1601
This reverts commit a189bb57c14ec2245f276a077fbe13a88622c1d7;
it turns out that we do need to send those bonus lines because
the sequence number available to the logic here doesn't account
for the actual last rendered sequence number on the client, and
in a bursty update situation we can skip or otherwise omit a
line range.
refs: #1597
This action causes the active workspace for the gui to change.
If the name is omitted a random name will be generated.
If the workspace doesn't exist, it will be be created.
The optional spawn parameter can be used to launch a specific
program into the new workspace; if omitted, the default prog
will be used.
The gui only supports a single active workspace. Switching workspaces
will repurpose existing gui windows and re-assign them to windows
in the new workspace, adjusting their size to fit those windows,
spawning new windows or closing unused windows as required.
The gui now exits when there are no panes in the active workspace,
rather than no panes at all.
refs: #1531
The mux now has a notion of which client is actively doing things.
This allows, for example, newly spawned windows to take on the
active workspace for a given client.
The gui now assigns a client id on startup, and sets the active
workspace to `default`.
The mux server temporarily overrides the active id to that of
the currently dispatching client when processing PDUs.
refs: https://github.com/wez/wezterm/issues/1531
Tidies up some code duplication within the mux protocol handler.
Move some of the logic into Mux, remove legacy Spawn Pdu to reduce
more duplication.
I want to dedup some of the similar logic that exists in the gui
spawn implementation as well in a follow up.
This is not exposed through any UX; the mux api allows setting
the workspace and propagating information about windows whose
workspace has changed.
Windows start with a blank workspace name.
This is just plumbing; nothing uses it yet.
refs: #1531
Define a way to compute a client ID and pass that through to the
mux server when verifying version compatibility.
Once associated, the session handler will keep some metadata
updated in the mux.
A new cli subcommand exposes the info:
```
; ./target/debug/wezterm cli list-clients
USER HOST PID CONNECTED IDLE WORKSPACE
wez mba.localdomain 52979 30.009225s 1.009225s
```
refs: #1531
user vars were stubbed out. This commit adds storage for them
in the mux client and adds a new notification that publishes each
var as it is changed. That differential stream is applied to the
storage in the mux client when it is received.
```lua
local wezterm = require 'wezterm'
wezterm.on("update-right-status", function(window, pane)
local woot = pane:get_user_vars().woot
window:set_right_status(tostring(woot))
end);
return {
unix_domains = {
{name="unix"},
},
}
```
then running:
* `wezterm connect unix`
* in that session: `printf "\033]1337;SetUserVar=%s=%s\007" woot `echo -n nice | base64``
causes `nice` to show in the status area.
refs: #1528
This is slightly misusing or misattributing things, but in
the context of the problem at hand, it is OK.
The issue is that palette changes are normally signalled by
the terminal instance in response to escape sequences. Those
changes are propagated to the mux client through the existing
alerting channel.
If the palette is changed implicitly via a config change, then
the terminal doesn't trigger that alert and the mux client(s)
don't know that they need to refresh the palette.
This commit tracks the last config generation per pane and
synthesizes a palette alert when it changes.
It might be better to have another variant of alert to indicate
config changes.
refs: #1526
This doesn't make a huge difference; I think we already addressed
the worst of the overhead with a combination of
eae327efcc
and the more recent commits to avoid over invalidation around
cursor movement and screen scrolling.
The numbers I see are a very small number of bytes per second when
scrolling through eg: vim and aren't crazy or alarming.
So I'm going to consider the related issue resolved!
closes: https://github.com/wez/wezterm/issues/867
Rather than using the configured initial window size, use the
size of the current tab to size the newly spawned tab.
refs: https://github.com/wez/wezterm/issues/920
Terminal now maintains a sequence number that increments
for each Action that is applied to it.
Changes to lines are tagged with the current sequence number.
This makes it a bit easier to reason about when an individual
line has changed relative to some point in "time"; the consumer
of the terminal can sample the current sequence number and then
can later determine which lines have changed since that point
in time.
refs: https://github.com/wez/wezterm/issues/867
This commit causes a window-config-reloaded event to trigger
when the appearance (dark/light mode) is changed on macos.
It also arranges to propagate the window level config to newly
spawned panes and tabs, created both via the gui and via the
CLI/mux interface.
refs: https://github.com/wez/wezterm/issues/894
refs: https://github.com/wez/wezterm/issues/806
