This teaches termwiz to recognize and encode the APC
sequences used by the kitty image protocol.
This doesn't include support for animations, just the
transmit, placement and delete requests.
refs: #986
This commit hooks up DECRQM so that we can report that we implement
synchronized updates, and then refines the code that manages sending
data to the terminal model; the first cut at synchronized updates
was a bit simplistic, and now we make a point of "flushing" pending
actions when we start a sync point, and again as soon as we release
the sync point.
This smooths out the jaggies around the orca that I mentioned in
dcbbda7702
and while testing this, I realized that recent parser changes had
mangled processing bundled dec private mode sequences where multiple
modes were specified in the same overall escape sequence. I've
added the missing unit test case for this and made that work again.
refs: https://github.com/wez/wezterm/issues/955
refs: https://github.com/wez/wezterm/issues/882
This implementation doesn't include a timeout, but should be
recoverable via a SoftReset.
There's no query response either: I think I'm missing DECRQM
entirely at the moment.
refs: https://github.com/wez/wezterm/issues/882
This commit introduces a 4th draw pass for rendering sixel and
iterm images that are attached to cells.
Previously, a cell could container either text or an image from
the perspective of the renderer. If it had an image then the glyph
bitmap would be ignored in favor of the image.
However, that causes sixel behavior to diverge from other terminals
(https://github.com/wez/wezterm/issues/942) so we need to be render
both of these.
The simplest way to achieve this is to add a distinct set of texture
coordinates for the attached image and then add a draw pass to alpha
blend it over the glyph content.
The sixel/iterm image processing stage is also adjusted to preserve
the prior cell information and "simply" attach the image info to
the cell. Previously, the cell would be replaced with a blank cell
with the image attached.
The result of this is that the notcurses-demo intro section can
now render the orca "enveloped in the soft glow of glyphs" rather
than caged in a black box.
Note that there are some cases where the render turns blocky but
I suspect that that is due to some other misunderstanding between
wezterm and notcurses and that we'll root cause it as a follow up.
This commit causes a window-config-reloaded event to trigger
when the appearance (dark/light mode) is changed on macos.
It also arranges to propagate the window level config to newly
spawned panes and tabs, created both via the gui and via the
CLI/mux interface.
refs: https://github.com/wez/wezterm/issues/894
refs: https://github.com/wez/wezterm/issues/806
This allows window-level config overrides to apply
to panes contained within the window.
For instance, this allows setting a window-level
color scheme.
Add the third device attributes (DA3) query+reply,
eliminating "unknown/unspecified CSI" error. Like
XTerm, simply reply with zeroes as opposed to site
codes or unique IDs.
https://vt100.net/docs/vt510-rm/DA3.html
This adjusts the cursor position after emitting a sixel.
@dankamongmen: I don't have much of a sixel test suite to speak
of (cat snake.six :-p); I'd appreciate it if you could run
notcurses against this and confirm that it is doing something
sane!
At the very least, we shouldn't be warning about the unhandled
mode any more!
refs: https://github.com/wez/wezterm/issues/863
refs: https://github.com/dankamongmen/notcurses/issues/1743
neovim doesn't like it when multiple drag events with the same
coordinates are received; it appears to treat that as though
the mouse button was double clicked.
This commit teaches the mouse report encoding to suppress multiple
drag events in succession that have the same payload.
refs: https://github.com/wez/wezterm/discussions/823
Use a similar hsv transformation to that used to dim inactive panes
instead of the treatment that made the black look grey, which felt
like a flash instead of a dim.
Two issues here:
* The hue angles need adjusting to work with the palette library
* The resultant RGB color had the wrong gamma level, resulting in
an overly bright image.
refs: https://github.com/wez/wezterm/issues/775
There were two bugs here:
* \u8D (the utf8 encoded representation of 0x8d, aka: RI) was not
recognized as a C1 code and was instead passed through as printable
text.
* The \u8D is a zero-width sequence which means that a subsequent
set_cell call on the new empty-by-default line wouldn't allocate
any cells in the line array, and the assigment to the line would
panic.
This commit avoids the panic for the second case, and then fixes up
the vtparser to correctly recognize the sequence as a C1 control.
refs: https://github.com/wez/wezterm/issues/768
When the title, icon, OSC 7 and SetUserVars sequences are processed,
notify the embedding application.
The gui layer uses this to trigger a titlebar update.
refs: #647
This has the effect of reducing the memory and scroll cost
for lines that are shorter than the physical width of the
terminal matrix.
refs: https://github.com/wez/wezterm/issues/740
It is only used by applications that repaint on a resize event,
and us rewrapping makes it harder to have an ideal view afterwards.
This change makes us more consistent with VTE's behavior in this case.
This helps with https://github.com/wez/wezterm/issues/574 but doesn't
completely resolve it.
I didn't realize that xterm inherited some additional mappings from
the X server, so this commit should make us more comformant with
xterms behavior.
Verified this by comparing `showkey -a` under both xterm and wezterm:
```
wezterm -n --config disable_default_key_bindings=true --config debug_key_events=true start -- showkey -a
```
refs: https://github.com/wez/wezterm/issues/236
refs: https://github.com/wez/wezterm/discussions/556
I've been meaning to do this for a while; this commit moves
the escape sequence parsing into the thread that reads the
pty output which achieves two goals:
* Large escape sequences (eg: image protocols) that span multiple
4k buffers can be processed without ping-ponging between the
reader thread and the main gui thread
* That parsing can happen in the reader thread, keeping the gui
thread more responsive.
These changes free up the CPU during intensive operations such
as timg video playback.
This is a slight layering violation, in that this processing
really belongs to local pane (or any pane that embeds Terminal),
rather than generically at the Mux layer, but it's not any
worse a violation than `advance_bytes` already was.
refs: https://github.com/wez/wezterm/issues/537
The default downscaling provided by the GPU can result in noisy
artifacts on highly detailed images.
This commit employs a cubic Catmull-Rom sampling filter for the
case where we have a single frame image that is being reduced
in size. This isn't the highest quality filter but strikes
a good balance with speed vs appearance and is strictly better
than the GPU texture sampling options that I could try.
when the size is set to auto, we'd essentially take the image as-is
and overflow the terminal.
This commit makes auto scale down the image to fit the terminal dimensions
if it is too big.
Using a boxed slice means that we hold exactly the memory required
for the file data, rather than the next-power-of-two, which can
be wasteful when a large number of images are being sent to
the terminal.
This is a API breaking change for termwiz, so bump its version.
refs: #534
```
echo -e "\033]777;notify;This is the notification title;This is the notification text\a"
```
Now pops up a notification in a similar manner to OSC 9, except
that this form allows setting both the title and the body separately.
refs: https://github.com/wez/wezterm/issues/489
Pasting a lot of text could cause a deadlock between writing
to the input side of the pty and consuming the output side.
Making the writer/input side non-blocking resolves this.
* Add ClearBuffer action
Clears all lines, both visible and those scrolled off the top of the viewport, making the prompt line the new first line and resetting the scrollbar thumb to the full height of the window.
This is the behavior that Hyper / xterm has for clearing the terminal.
* Combine ClearBuffer into ClearScrollback as enum with associated erase mode
Makes it easier to manage the different options of clearing the terminal.
This appears to have been broken since the introduction of mouse
assignments :-/
This commit adds Pane::is_alt_screen_active so that the gui layer
can tell whether the alt screen is active, and allow passing down
the event.
refs: #429
TL;DR: on unix, or if bracketed paste is on, then we paste with
unix newlines. If on windows && !bracketed paste then with CRLF.
See explanation in the code for more context.
refs: https://github.com/wez/wezterm/issues/411
These aren't currently rendered, but the parser and model now support
recognizing expanded underline sequences:
```
CSI 24 m -> No underline
CSI 4 m -> Single underline
CSI 21 m -> Double underline
CSI 60 m -> Curly underline
CSI 61 m -> Dotted underline
CSI 62 m -> Dashed underline
CSI 58 ; 2 ; R ; G ; B m -> set underline color to specified true color RGB
CSI 58 ; 5 ; I m -> set underline color to palette index I (0-255)
CSI 59 -> restore underline color to default
```
The Curly, Dotted and Dashed CSI codes are a wezterm assignment in the
SGR space. This is by no means official; I just picked some numbers
that were not used based on the xterm ctrl sequences.
The color assignment codes 58 and 59 are prior art from Kitty.
refs: https://github.com/wez/wezterm/issues/415
Following on from 8649056ac0,
this commit should make it harder to make a similar mistake
in the future, by introducing a new TerminalSize struct for
that purpose.
Tidies up the plumbing around pixel dimensions so that ImageData
can be rendered via the termwiztermtab bits.
I put this together to play with sticking the wezterm logo in
the close confirmation dialogs. I didn't end up using that though,
but have preserved the commented code for use in future hacking.
Sometimes, I'd notice that imgcat would have a weird aspect.
I stumbled across the root cause while debugging something else:
the order of the pixel width and height was flipped here.
when running eg: `wezterm imgcat assets/icon/terminal.png --width 3`
we were scaling the height up by the ratio between the physical
width and the specified width, instead of down.
Revise logging so that we use info level for things that we want
to always log, and adjust the logger config to always log info
level messages.
That means shifting some warning level logs down lower to debug level so
that they aren't noisy.
closes: https://github.com/wez/wezterm/issues/388
I'm gradually improving snapshot testing macro devx in k9 and preparing
to ship v1. Before i do this i'm changing the inline snapshot macro to be
just `snapshot!()` that takes `Debug` trait an an arg and figures out
serialization of it.
This commit adjusts the default color palette to use the same color
cube calculation as xterm; it isn't the ideal color cube calculation
and results in slightly brighter colors.
This commit also memoizes the default palette calculation so that
it isn't recomputed each time a palette is created.
refs: https://github.com/wez/wezterm/issues/348
This is one of those massive time sinks that I almost regret...
As part of recent changes to dust-off the allsorts shaper, I noticed
that the harfbuzz shaper wasn't shaping as well as the allsorts one.
This commit:
* Adds emoji-test.txt, a text file you can `cat` to see how well
the emoji are shaped and rendered.
* Fixes (or at least, improves) the column width calculation for
combining sequences such as "deaf man" which was previously calculated
at 3 cells in width when it should have just been 2 cells wide, which
resulted in a weird "prismatic" effect during rendering where the
glyph would be rendered with an extra RHS portion of the glyph across
3 cells.
* Improved/simplified the clustering logic used to compute fallbacks.
Previously we could end up with some wonky/disjoint sequence of
undefined glyphs which wouldn't be successfully resolved from a
fallback font. We now make a better effort to consolidate runs of
undefined glyphs for fallback.
* For sequences such as "woman with veil: dark skin tone" that occupy a
single cell, the shaper may return 3 clusters with 3 glyphs in the
case that the font doesn't fully support this grapheme. At render
time we'd just take the last glyph from that sequence and render it,
resulting in eg: a female symbol in this particular case. It is
generally a bit more useful to show the first glyph in the sequence
(eg: person with veil) rather than the gender or skin tone, so the
renderer now checks for this kind of overlapping sequence and renders
only the first glyph from the sequence.
Adds some supporting methods for computing the `SemanticZone`s
in the display and a key assignment that allows scrolling the
viewport to jump to the next/prev Prompt zone.
This commit allows the terminal to tag cells with their semantic
type, as defined by OSC 133 escape sequences.
The gist of it is that each cell is now semantically one of:
* Output (eg: from the activity performed by the user. This is the
default)
* Input (eg: something that the user typed as input)
* Prompt (eg: "uninteresting" chrome/UI from the shell)
The semantic type is applied almost exactly like an SGR attribute,
except that resetting SGR doesn't clear the semantic type.
Tagging the cells in this way allows for smarter UX in the future;
for example, selecting the entire input or output from the last
command without fiddling around to avoid the prompt line(s),
or "paging up" to a prior prompt rather than page.
This doc covers those escapes as used in domterm, iterm2 and other
terminals:
https://gitlab.freedesktop.org/Per_Bothner/specifications/blob/master/proposals/semantic-prompts.md
This is an example of how to configure the shell to emit these
sequences; I'll add a proper little blob of shell specifically
for wezterm in a later commit:
https://github.com/PerBothner/DomTerm/blob/master/tools/shell-integration.zsh
I've had a FIXME in here for a while to check the positioning,
but never got around to it.
The onefetch folks have an app that does care about this,
so it's time to resolve it!
This commit adjusts the cursor position for the iterm case
(not the sixel case), and results in both:
running in xterm:
```
onefetch --image ~/Downloads/squirrel.png
```
running in wezterm:
```
TERM_PROGRAM=iTerm.app onefetch --image ~/Downloads/squirrel.png --image-backend=iterm
```
```
onefetch --image ~/Downloads/squirrel.png --image-backend=sixel
```
showing consistent positioning.
refs: https://github.com/wez/wezterm/issues/317
refs: https://github.com/o2sh/onefetch/pull/305
This reverts to the original resize behavior of padding out
the display when resizing taller, but only for Windows systems.
More explanation in the comments in the code.
refs: #138
This seems to make our resize behavior a bit nicer and more
consistent with eg: xterm.
Previously we'd consider the previously existing scrollback
as immutable and prefer to add excess blank lines of padding
when making the window taller.
In practice that meant that content would scroll back when
making the window taller, which is annoying.
This commit removes that constraint and instead will prefer
to maintain the cursor position relative to the top of the
viewport when the size changes.
refs: #138
This avoids having a green (by default) border around the cursor.
The dynamic color escape sequences have been updated to also
change the border color when the cursor background color is changed.
This commit introduces a small, bounded, LRU cache for recently
decoded images.
This allows the same image ID to be used in the cache that the
same image bits are repeatedly sent to the terminal.
This is advantageous because it reduces the amount of texture
space required by the gui layer.
There was an integer conversion happening when taking the
per-cell image texture coordinates and applying them to the
texture atlas image coordinates.
This commit replaces that math with floating point and corrects
the visual artifacts within squirrel.png.
refs: #292
When returning the title string we prefer to return the OSC 1 Icon
title (which is interpreted as "tab title" by some emulators and
shell toolkits) on the basis that it will have been setup for
display in a more limited width than the overall window title
and will thus likely be a better choice to show to the user.
If OSC 1 hasn't been set then we'll fall back to the OSC 2 window
title as before.
refs: https://github.com/wez/wezterm/issues/247
