It didn't really belong there; it was added as a bit of a hack
to propagate screen reverse video mode.
Move that to the RenderableDims struct and remove the related
bits from Line
Introduces a heap-based quad allocator that we cache on a per-line
basis, so if a line is unchanged we simply need to copy the previously
computed set of quads for it into the gpu quad buffer.
The results are encouraging wrt. constructing those quads; the
`quad_buffer_apply` is the cost of the copy operation, compare with
`render_screen_line_opengl` which is the cost of computing the quads;
it's 300x better at the p50 and >100x better at p95 for a full-screen
updating program:
full 2880x1800 screen top:
```
STAT p50 p75 p95
Key(quad_buffer_apply) 2.26µs 5.22µs 9.60µs
Key(render_screen_line_opengl) 610.30µs 905.22µs 1.33ms
Key(gui.paint.opengl) 35.39ms 37.75ms 45.88ms
```
However, the extra buffering does increase the latency of
`gui.paint.opengl` (the overall cost of painting a frame); contrast the
above with the latency in the same scenario with the current `main`
(rather than this branch):
```
Key(gui.paint.opengl) 19.14ms 21.10ms 28.18ms
```
Note that for an idle screen this latency is ~1.5ms but that is also true
of `main`.
While the overall latency in the histogram isn't a slam dunk,
running `time cat bigfile` is ~10% faster on my mac.
I'm sure there's something that can be shaved off to get a more
convincing win.
Allows the following assignment actions; I was just over-using z for
no real reason, I'm not suggesting that these are good assignments.
```
-- move the cursor backwards to the start of the current zone, or
-- to the prior zone if already at the start
{ key = 'z', mods = 'NONE', action = act.CopyMode 'MoveBackwardSemanticZone' },
-- move the cursor forwards to the start of the next zone
{ key = 'Z', mods = 'NONE', action = act.CopyMode 'MoveForwardSemanticZone' },
-- start selecting by zone: both the start point and the cursor
-- position will be expanded to the containing zone and the union
-- of those two will be used for the selection
{
key = 'z',
mods = 'CTRL',
action = act.CopyMode { SetSelectionMode = 'SemanticZone' },
},
-- like MoveBackwardSemanticZone by only considers zones of the
-- specified type
{ key = 'z', mods = 'ALT', action = act.CopyMode { MoveBackwardZoneOfType ='Output' }},
-- like MoveForwardSemanticZone by only considers zones of the
-- specified type
{ key = 'Z', mods = 'ALT', action = act.CopyMode { MoveForwardZoneOfType ='Output' }},
```
refs: https://github.com/wez/wezterm/issues/2346
Without the feature the build fails with:
--> src\escape\apc.rs:377:57
|
377 | let mut memory_info = MEMORY_BASIC_INFORMATION::default();
| ^^^^^^^ function or associated item not found in `MEMORY_BASIC_INFORMATION`
|
When `parse_first_as_vec` is parsing an OSC sequence (e.g.
`SetHyperlink`) that is terminated by the escaped form of ST (`ESC \`),
ensure that the ST sequence is included in the returned vector.
This is achieved by ensuring the VTParser has returned to the "ground"
state: i.e. the stored state after the `ESC` is processed is not enough
for `parse_first_as_vec` to terminate. We must also parse the `\` to
ensure that we return a complete span to the caller.
Fixes https://github.com/markbt/streampager/issues/57
`4` is actually defined as CMYK according to ITU-T Rec. T.416:
> A parameter substring for values 38 or 48 may be divided by one or more separators (03/10) into parameter elements,
> denoted as Pe. The format of such a parameter sub-string is indicated as:
>
> Pe : P ...
>
> Each parameter element consists of zero, one or more bit combinations from 03/00 to 03/09, representing the digits
> 0 to 9. An empty parameter element represents a default value for this parameter element. Empty parameter elements at
> the end of the parameter substring need not be included.
>
> The first parameter element indicates a choice between:
>
> 0 implementation defined (only applicable for the character foreground colour)
> 1 transparent;
> 2 direct colour in RGB space;
> 3 direct colour in CMY space;
> 4 direct colour in CMYK space;
> 5 indexed colour.
refs: 6e9a22e199 (commitcomment-79669016)
This commit extends the sgr color parser to support a wezterm
extension that I just made up:
```
printf "\e[48:4:255:0:0:60mhello\e0m"
```
The `4` is wezterm specific and denotes 4 channel color, in this case
RGBA. red is 255, green is 0, blue is 0 and alpha is 60; the values are
interpreted as u8 values.
CSI 38 (fg), 48 (bg) and 58 (underline) support this.
refs: https://github.com/wez/wezterm/issues/2313
This doesn't really change any behavior, but adjusts the types
such that CSIs that set colors have the potential to track the
alpha channel and that can make it through to the GUI/render layer.
This reduces the resident memory by another ~10% because it avoids
keeping as many runs of whitespace.
Runtime for `time cat enwiki8.wiki` is still ~11-12s, resident: 530K
refs: https://github.com/wez/wezterm/issues/1626
The previous commit added the option to convert the storage to
the cluster format. That saves memory as rows are moved to scrollback,
but makes scrolling back more expensive due to that conversion.
This commit adds a fast(ish) path for the common case of simply
appending text to a new line before it gets scrolled: the default
format for lines in the screen is now the cluster format and,
provided that the cursor moves from left to right as text is
emitted, can simply append to the cluster storage in-place
and avoids a conversion when the line is moved to scrollback.
This improves the throughput of `time cat enwiki8.wiki` so
that the runtime is typically around 11-12s (compared to 9-10s
before introducing cluster storage). However, this is often
a deal of variance in the measured time and I believe that
that is due to the renderer triggering conversions back to
the vec storage and introducing slowdowns from the render side.
That's what I'll investigate next.
Previously this would create a new String because it had to, but
with the clustered storage we may be able to simply reference the
existing string as a str reference, so allow for that.
Adds the option to use an alternative clusted line storage for
the cells component of the line.
This structure is not optimal for mutation, but is better structured
for:
* matching/extracting textual content
* using less memory than the prior simple vector
For some contrast: the line "hello" occupies 5 Cells in the cell based
storage; that 5 discrete Cells each with their own tiny string
and a copy of their attributes.
The clustered version of the line stores one copy of the cell
attributes, the string "hello" and some small (almost constant size)
overhead for some metadata. For simple lines of ascii text, the
clustered version is smaller as there are fewer copies of the cell
attributes. Over the span of a large scrollback and typical terminal
display composition, this saving is anticipated to be significant.
The clustered version is also cheaper to search as it doesn't require
building a copy of the search text for each line (provided the line is
already in clustered form).
This commit introduces the capability: none of the internals request the
new form yet, and there are likely a few call sites that need to be
tweaked to avoid coersion from clustered to vector form.
While profiling `time cat bigfile` I noted that a big chunk of the
time is spent computing widths, so I wanted to dig into a bit.
After playing around with a few options, I settled on the approach
in this commit.
The key observations:
* WcWidth::from_char performs a series of binary searches.
The fast path was for ASCII, but anything outside that range
suffered in terms of latency.
* Binary search does a lot more work than a simple table lookup,
so it is desirable to use a lookup, and moreso to combine the
different tables into a single table so that classification
is an O(1) super fast lookup in the most common cases.
Here's some benchmarking results comparing the prior implementation
(grapheme_column_width) against this new pre-computed table
implementation (grapheme_column_width_tbl).
The ASCII case is more than 5x faster than before at a reasonably snappy
~3.5ns, with the more complex cases being closer to a constant ~20ns
down from 120ns in some cases.
There are changes here to widechar_width.rs that should get
upstreamed.
```
column_width ASCII/grapheme_column_width
time: [23.413 ns 23.432 ns 23.451 ns]
column_width ASCII/grapheme_column_width_tbl
time: [3.4066 ns 3.4092 ns 3.4121 ns]
column_width variation selector/grapheme_column_width
time: [119.99 ns 120.13 ns 120.28 ns]
column_width variation selector/grapheme_column_width_tbl
time: [21.185 ns 21.253 ns 21.346 ns]
column_width variation selector unicode 14/grapheme_column_width
time: [119.44 ns 119.56 ns 119.69 ns]
column_width variation selector unicode 14/grapheme_column_width_tbl
time: [21.214 ns 21.236 ns 21.264 ns]
column_width WidenedIn9/grapheme_column_width
time: [99.652 ns 99.905 ns 100.18 ns]
column_width WidenedIn9/grapheme_column_width_tbl
time: [21.394 ns 21.419 ns 21.446 ns]
column_width Unassigned/grapheme_column_width
time: [82.767 ns 82.843 ns 82.926 ns]
column_width Unassigned/grapheme_column_width_tbl
time: [24.230 ns 24.319 ns 24.428 ns]
```
Here's the benchmark summary after cleaning this diff up ready
to commit; it shows ~70-80% improvement in these cases:
```
; cargo criterion -- column_width
column_width ASCII/grapheme_column_width
time: [3.4237 ns 3.4347 ns 3.4463 ns]
change: [-85.401% -85.353% -85.302%] (p = 0.00 < 0.05)
Performance has improved.
column_width variation selector/grapheme_column_width
time: [20.918 ns 20.935 ns 20.957 ns]
change: [-82.562% -82.384% -82.152%] (p = 0.00 < 0.05)
Performance has improved.
column_width variation selector unicode 14/grapheme_column_width
time: [21.190 ns 21.210 ns 21.233 ns]
change: [-82.294% -82.261% -82.224%] (p = 0.00 < 0.05)
Performance has improved.
column_width WidenedIn9/grapheme_column_width
time: [21.603 ns 21.630 ns 21.662 ns]
change: [-78.429% -78.375% -78.322%] (p = 0.00 < 0.05)
Performance has improved.
column_width Unassigned/grapheme_column_width
time: [23.283 ns 23.355 ns 23.435 ns]
change: [-71.826% -71.734% -71.641%] (p = 0.00 < 0.05)
Performance has improved.
```
This enables tentative support for https://sw.kovidgoyal.net/kitty/keyboard-protocol
It's only been lightly tested with the notcurses-input program and
eyeballed against a few random keypresses in kitty running
`printf "\x1b[=11u" ; od -c`
I tried with neovim, but it doesn't seem like the version available
in Fedora 36 supports this yet.
refs: https://github.com/wez/wezterm/issues/1141
The `File` variant for background layers may now be an object
that specifes a speed factor. That factor is applied to the
animation frame durations in the loaded image, allowing the
playback rate to be adjusted.
Avoid using serde for mapping between Lua and Rust for the `Config`
struct.
This improves the build speed of the config crate by 2x; it goes down
from 30 seconds to 9 seconds on my 5950x.
Also ensure the rust backtrace is printed by the fuzzer
for some reason, cargo-fuzz doesn't do this automatically, which limits
its out-of-the-box utility.
refs: https://github.com/wez/wezterm/pull/1986
I've bundled this into termwiz's UnicodeVersion type as that is
a similar concept that is already routed through to the appropriate
function.
refs: https://github.com/wez/wezterm/issues/1888
We're now capable of remembering an alpha value for everything
in the palette and the main window theme, but not the tab bar theme.
Whether the alpha is correctly respected at render time is a different
story!
refs: #1835
Go directly to the underlying env_logger crate, as pretty_env_logger
hasn't been updated in some time, and I'd like to be able to redirect
the log output to a file more directly, and that feature is in a newer
version of the env logger than pretty_env_logger was pulling in.
* termwiz: add support for kitty image using shm mode
* termwiz: kitty image shm cleanup error handling
* termwiz: kitty image shm create wrapper for HANDLE and impl Drop for it
* termwiz: kitty image shm refactor windows implementation
Signed-off-by: Shreesh Adiga <16567adigashreesh@gmail.com>
There were a a couple of issues:
* `ImageData::hash` would re-hash the image on every call, and this was
called for every cell that comprised an image on the mux server side
* `SerializedLine` needed to understand how to remove the `Arc<ImageData>`
image attachments so that we didn't serialize a complete copy of the
image per cell that comprised the image.
A new RPC was introduced to attempt to fetch `ImageData` given its
content hash and pane, row and cell index as a hint to locate it.
A client side LRU of content hash to `ImageData` is used to avoid
issuing repeat calls to that new RPC.
refs: #1237
The issue appears to be due to a rogue trailing semicolon in the input
data. Support for this appears to be mixed: an online converter didn't
produce valid output, but image magick's convert utility accepted it.
This commit allows an optional trailing semicolon at the end of the
color definition regex and enables wezterm to render the image.
refs: https://github.com/wez/wezterm/issues/1711
* #217 DECSDM, and commented pseudocode for improved handling of transparent image cells
* oops forgot cargo fmt --all
* #217 set initial palette colors to match VT340
* #217 cleanup color_map initialization, fix sixel scrolling
* #217 remove large comment - transparency discussion for another time
This commit allows the following configuration:
```
wezterm -n --config 'colors = { selection_fg = "clear", selection_bg = "rgba:50% 50% 50% 50%" }'
```
which sets the selection_bg to fully transparent, and selection_bg to
50% transparent gray.
When selection_fg is fully transparent we'll use the normal fg color.
When selection_bg is partially (or fully!) transparent, it will be
alpha blended over the current cell background color.
To support this, the config file will now accept rgba colors specified
as 4 whitespace delimited numeric values. If a value ends with `%` it
is interpreted as a number in the range 0-100. Otherwise, it is
interpreted as a number in the range 0-255. The 4 values are
red, green, blue, alpha.
At this time, only the selection_fg and selection_bg settings accept
alpha values.
refs: #1615
Resolves a little bit of the awkward duplication of color types
between some of the crates by factoring them a little bit better.
This is prep for allowing specifying alpha for some colors
in the config.
This puts to final rest #478, wherein ligatured glyphs that span
cells would render portions of the glyph with the wrong fg color,
where wrong was usually the bg color and cause the glyph to turn
invisible when cursoring through the ligature.
The approach used here is to divide the glyph into 7 discrete strips
where each strip either intersects with the cursor, the selection, or
neither. That allows us to render each strip with the appropriate
foreground color.
This change simplifies some of the logic and allows some other code
to be removed, so that feels good!
As is tradition with these renderer changes, there's a good chance that
I overlooked something in testing and that the metrics or alignment
might be slightly off for some font/text combo. Let's see how this
goes!
refs: #784
refs: #478
refs: #1617
This commit refines bidi property handling:
* experimental_bidi has been split into two new configuration settings;
`bidi_enabled` (which controls whether the terminal performs implicit
bidi processing) and `bidi_direction` which specifies the base
direction and whether auto detection is enabled.
* The `Line` type can now store those bidi properties (they are actually
split across 3 bits representing enabled, auto-detection and
direction)
* The terminal now has a concept of active bidi properties and default
bidi properties
* The default properties are pulled from the wezterm configuration
* active bidi properties are potentially set via escape sequences,
BDSM (which sets bidi_enabled) and SCP (which sets bidi_direction).
We don't support the 2501 temporary dec private mode suggested by
the BIDI recommendation doc at this time.
* When creating new `Line`'s or clearing from the start of a `Line`, the
effective bidi properties are computed (from the active props,
falling back to default propr) and applied to the `Line`.
* When rendering the line, we now look at its bidi properties instead
of just the global config.
The default bidi properties are `bidi_enabled: false` and
`bidi_direction: LeftToRight` which corresponds to the typical
bidi-unaware mode of most terminals.
It is possible to live reload the config to change the effective
defaults, but note that they apply, by design, to new lines being
processed through the terminal. That means existing output is
left unaffected by a config reload, but subsequently printed lines
will respect it. Pressing CTRL-L or otherwise contriving to have
the running application refresh its display should cause the
refreshed display to update and apply the new bidi mode.
refs: #784
Two problems:
* Need reordered_runs method to populate ranges based on
the reordered levels!
* Use reordered runs to get the *logical* bounds of those
runs and pass those to harfbuzz.
Now the text is ordered correctly, but the rendering advances
by the wrong amount for the reordered clusters and looks bad
unless experimental_pixel_positioning=true.
refs: #784
This commit is larger than it appears to due fanout from threading
through bidi parameters. The main changes are:
* When clustering cells, add an additional phase to resolve embedding
levels and further sub-divide a cluster based on the resolved bidi
runs; this is where we get the direction for a run and this needs
to be passed through to the shaper.
* When doing bidi, the forced cluster boundary hack that we use to
de-ligature when cursoring through text needs to be disabled,
otherwise the cursor appears to push/rotate the text in that
cluster when moving through it! We'll need to find a different
way to handle shading the cursor that eliminates the original
cursor/ligature/black issue.
* In the shaper, the logic for coalescing unresolved runs for font
fallback assumed LTR and needed to be adjusted to cluster RTL.
That meant also computing a little index of codepoint lengths.
* Added `experimental_bidi` boolean option that defaults to false.
When enabled, it activates the bidi processing phase in clustering
with a strong hint that the paragraph is LTR.
This implementation is incomplete and/or wrong for a number of cases:
* The config option should probably allow specifying the paragraph
direction hint to use by default.
* https://terminal-wg.pages.freedesktop.org/bidi/recommendation/paragraphs.html
recommends that bidi be applied to logical lines, not physical
lines (or really: ranges within physical lines) that we're doing
at the moment
* The paragraph direction hint should be overridden by cell attributes
and other escapes; see 85a6b178cf
and probably others.
However, as of this commit, if you `experimental_bidi=true` then
```
echo This is RTL -> عربي فارسی bidi
```
(that text was sourced from:
https://github.com/microsoft/terminal/issues/538#issuecomment-677017322)
then wezterm will display the text in the same order as the text
renders in Chrome for that github comment.
```
; ./target/debug/wezterm --config experimental_bidi=false ls-fonts --text "عربي فارسی ->"
LeftToRight
0 ع \u{639} x_adv=8 glyph=300 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
2 ر \u{631} x_adv=3.78125 glyph=273 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
4 ب \u{628} x_adv=4 glyph=244 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
6 ي \u{64a} x_adv=4 glyph=363 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
8 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
9 ف \u{641} x_adv=11 glyph=328 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
11 ا \u{627} x_adv=4 glyph=240 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
13 ر \u{631} x_adv=3.78125 glyph=273 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
15 س \u{633} x_adv=10 glyph=278 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
17 ی \u{6cc} x_adv=4 glyph=664 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
19 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
20 - \u{2d} x_adv=8 glyph=276 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
21 > \u{3e} x_adv=8 glyph=338 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
```
```
; ./target/debug/wezterm --config experimental_bidi=true ls-fonts --text "عربي فارسی ->"
RightToLeft
17 ی \u{6cc} x_adv=9 glyph=906 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
15 س \u{633} x_adv=10 glyph=277 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
13 ر \u{631} x_adv=4.78125 glyph=272 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
11 ا \u{627} x_adv=4 glyph=241 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
9 ف \u{641} x_adv=5 glyph=329 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
8 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
6 ي \u{64a} x_adv=9 glyph=904 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
4 ب \u{628} x_adv=4 glyph=243 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
2 ر \u{631} x_adv=5 glyph=273 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
0 ع \u{639} x_adv=6 glyph=301 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
LeftToRight
0 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
1 - \u{2d} x_adv=8 glyph=480 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
2 > \u{3e} x_adv=8 glyph=470 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
;
```
refs: https://github.com/wez/wezterm/issues/784
This commit decomposes the main get_semantic_zones method into two
parts:
* A per-line portion, where the line ranges are cached (invalidated on
change)
* The overall screen portion, where the line ranges are merged
This changes the overall complexity of computing zones from
O(width * scrollback-height)
To an incremental:
O((width * number of changed lines since last query) + scrollback-height)
You can see some samples of elapsed time below; those show the times for
running both the old and the new implementation on the same data. The
number of lines/zones in the scrollback increases with each call and you
can see that the new implementation is a bit faster anyway at low
volumes but is significantly faster as the number of lines/zones
increases, because the amount of work is reduced.
```
get_semantic_zones: 71.708µs
get_semantic_zones_new: 59.041µs
get_semantic_zones: 71.166µs
get_semantic_zones_new: 9.166µs
get_semantic_zones: 44.291µs
get_semantic_zones_new: 4.208µs
get_semantic_zones: 69.791µs
get_semantic_zones_new: 10.291µs
get_semantic_zones: 59.375µs
get_semantic_zones_new: 7.958µs
get_semantic_zones: 52.5µs
get_semantic_zones_new: 4.5µs
get_semantic_zones: 91.791µs
get_semantic_zones_new: 20.916µs
get_semantic_zones: 229.916µs
get_semantic_zones_new: 109.208µs
get_semantic_zones: 224.125µs
get_semantic_zones_new: 15.208µs
get_semantic_zones: 291.791µs
get_semantic_zones_new: 11.833µs
get_semantic_zones: 238.875µs
get_semantic_zones_new: 12.625µs
get_semantic_zones: 468.458µs
get_semantic_zones_new: 126.583µs
get_semantic_zones: 460.5µs
get_semantic_zones_new: 25.666µs
get_semantic_zones: 358.291µs
get_semantic_zones_new: 19.541µs
get_semantic_zones: 436.833µs
get_semantic_zones_new: 17.875µs
get_semantic_zones: 313.166µs
get_semantic_zones_new: 15.25µs
get_semantic_zones: 333.958µs
get_semantic_zones_new: 16.541µs
get_semantic_zones: 364.666µs
get_semantic_zones_new: 14.041µs
```
I generated nerdfonts_data.rs with this shell script; it uses `i_all.sh`
from the nerdfonts repo to get the base mapping:
```
source ./lib/i_all.sh
echo "//! Data mapping nerd font symbol names to their char codepoints"
echo "pub const NERD_FONT_GLYPHS: &[(&str, char)] = &["
for var in "${!i@}"; do
# trim 'i_' prefix
glyph_name=${var#*_}
glyph_char=${!var}
glyph_code=$(printf "%x" "'$glyph_char'")
echo "(\"$glyph_name\", '\u{$glyph_code}'), // $glyph_char"
done
echo "];"
```
Then intent is to use it in wezterm:
```
local wezterm = require 'wezterm'
wezterm.log_info(wezterm.nerdfonts.dev_mozilla)
```
We need 100% of the info for it to work correctly, so this commit:
* Exposes the keyboard encoding mode via the Pane trait
* Adds the scan code to the RawKeyEvent
* Has the GUI perform the encoding if the keyboard is set that way
* Removes the basic encoder from termwiz in favor of the gui level one
The net result is that we bypass the Pane::key_up/Pane::key_down methods
in almost all cases when the encoding mode is set to win32-input-mode.
There is now a config option: allow_win32_input_mode that can be
used to prevent using this mode.
refs: #1509
This commit causes the terminal to emit win32-input-mode encoded key up
and down events for a limited subset of keys When win32-input-mode is
enabled.
We limit them to keys where we know the VK key code equivalent,
and where those keys are either not representable (eg: modifier
only key events), or may generate ambiguous output (eg: CTRL-SPACE
in different keyboard layouts).
However, in my experiments, modifier only key presses confuse powershell
and cause it to emit `@`, so I've disabled that in the code for now.
refs: https://github.com/wez/wezterm/issues/318
refs: https://github.com/wez/wezterm/issues/1509
refs: https://github.com/wez/wezterm/issues/1510
This is a baby step that formalizes the different encoding schemes into
an enum, and hooks up the decset sequence for win32-input-mode.
It doesn't change any of the actual encoding at this time.
refs: #1509
When rendering the IME composing text, I noticed that for the Korean
input sequence: shift+'ㅅ' followed by 'ㅏ' we'd render the 'ㅆ' (the
shifted first character) in black and the composing 'ㅏ' in white
against the cursor color, and that was very difficult to read,
especially at the default font size.
To resolve this, this commit:
* Forces clustering to break around the cursor boundary, so that
we treat the cursor position as its own separately styled cluster
* Adjusts cursor/bg rendering so that we always consider the start of
the cluster for the colors of that run. We are guaranteed that a
ligatured sequence will fit in the background area anyway.
This has the effect of "breaking" programming ligatures such as '->'
when cursoring through them, and decomposing them into their individual
'-' and '>' glyphs, which is a reasonable price to pay for being able
to see things better on screen.
refs: https://github.com/wez/wezterm/issues/1504
refs: https://github.com/wez/wezterm/issues/478
Previously, we would implicitly set it to the special SEQ_ZERO
value, but since that value always flags the row as changed,
it causes some over-invalidation issues downstream in wezterm.
This commit makes that parameter required, so that the code that
is creating a new Line always passes down the seqno from that event.
refs: #1472
Not 100% sure why this only really manifested on Windows, but
the symptoms were:
* Run powershell in a tab
* Run `dir`
* Hit enter a couple of times to show a couple of prompts
* Try using the mouse to select across the prompt boundaries
The selection would get invalidated crossing the boundaries.
I traced this down to the lines around those regions having
SEQ_ZERO as their sequence, so this commit ensures that lines
that are created as part of scrolling the screen are correctly
tagged with the current seqno from the terminal display.
Why only windows? Not totally sure; perhaps it is related to
something funky happening in the conpty layer and sending us
unusual escapes (eg: scroll margins?)
permits iTerm2 images to be drawn anywhere on screen without
scrolling the cursor, including the bottom row.
Also included is a check in fcwrap.rs to_range_set(), without which
was causing a panic at runtime due to subtraction from unsigned
leading to overflow.
This helps us correctly set the size of the image cell
for the case where we have a partial cell at the right/bottom
edge of an image being mapped across cells.
refs: #1270
We need to force the codepage to UTF8 this to avoid having our UTF-8
bytestreams be misinterpreted, and to restore the original before we're
done.
refs: https://github.com/wez/wezterm/issues/1435
implement missing alt-screen support and fixup building the examples
while we're in here.
refs: #1244
This commit teaches `RgbColor::from_rgb_str` to support
colors in the form `hsl:235 100 50`, an HSL colorspace
color specification.
While banging my head on why my test wasn't passing, I realized
that this was producing 10 bpc color and the code to convert
those to RGB was incorrectly multiplying conversion terms!
refs: https://github.com/wez/wezterm/issues/1436
From esctest:
CUPTests.test_CUP_ColumnOnly
HVPTests.test_HVP_ColumnOnly
and the newly added at https://invent.kde.org/ninjalj/esctest.git:
DECSETTests.test_DECSET_DECLRMM_OnlyRight
DECSTBMTests.test_DECSTBM_OnlyBottom
Not all codepoints are valid when combined with a presentation
selector.
This commit ensures that we respect the valid sequences defined
by the current version of unicode (version 14).
refs: #1231
refs: #997
As promised in the previous commit, this one implements an escape
sequence to control the unicode version.
Unknown to me in the previous commit, iTerm2 already defines such
an escape sequence, so we simply implement it here with the same
semantics.
refs: #1231
refs: #997
This is a fairly far-reaching commit. The idea is:
* Introduce a unicode_version config that specifies the default level
of unicode conformance for each newly created Terminal (each Pane)
* The unicode_version is passed down to the `grapheme_column_width`
function which interprets the width based on the version
* `Cell` records the width so that later calculations don't need to
know the unicode version
In a subsequent diff, I will introduce an escape sequence that allows
setting/pushing/popping the unicode version so that it can be overridden
via eg: a shell alias prior to launching an application that uses a
different version of unicode from the default.
This approach allows output from multiple applications with differing
understanding of unicode to coexist on the same screen a little more
sanely.
Note that the default `unicode_version` is set to 9, which means that
emoji presentation selectors are now by-default ignored. This was
selected to better match the level of support in widely deployed
applications.
I expect to raise that default version in the future.
Also worth noting: there are a number of callers of
`unicode_column_width` in things like overlays and lua helper functions
that pass `None` for the unicode version: these will assume the latest
known-to-wezterm/termwiz version of unicode to be desired. If those
overlays do things with emoji presentation selectors, then there may be
some alignment artifacts. That can be tackled in a follow up commit.
refs: #1231
refs: #997
`use_fancy_tab_bar` switches to an alternate rendering of the tab
bar that uses the window_frame config to get a proportional
title font to use to render tabs, as well as rendering a few
additional elements to space out and make the tabs feel more
like tabs.
Computing the number of tabs doesn't respect the alternate font
at this time.
Formatted tab item foreground and background colors are also
not respected at this time.
refs: #1180
This was a bit of a PITA to run down; the essence of the problem
was that the shaper was returning an x_advance of 0 for U+3000,
which caused wezterm's shaping layer to elide that glyph.
I eventually tracked down the x_advance to be the result of
scaling by an x_scale of 0, which in turn is the result of
harfbuzz not knowing the font size.
The critical portion of this diff is the line that advises
harfbuzz that the font has changed after we've applied the
font size.
The rest is just stuff to make it easier to debug and verify.
This:
```
printf "x\u3000x."
```
Now correctly renders on screen as "x x".
fixes: #1161
I noticed while reviewing the session recording for https://github.com/wez/wezterm/issues/1102
that wezterm reported:
```
2021-09-04T22:05:46.136Z WARN wezterm_term::terminalstate::performer > unknown unspecified CSI: "58::2::87::61::38m"
2021-09-04T22:05:46.138Z WARN wezterm_term::terminalstate::performer > unknown unspecified CSI: "58::2::87::61::38m"
```
Those extra double-colons aren't valid, and I think they're coming from
this terminfo file, so fix it up!
This will enable eg: a lua helper function to serialize keycodes to
assist in some key rebinding scenarios (see:
https://github.com/wez/wezterm/pull/1091#issuecomment-910940833 for the
gist of it) but also makes it a bit easier to write unit tests for key
encoding so that situations like those in #892 are potentially less
likely to occur in the future.
