When in raw mode, go to level 2, but use level 1 for cooked
so that we don't obfuscate ctrl-c.
A consequnce of this is that CTRL-C is now reported to the app
as CTRL-lowercase-c where we previously reported as CTRL-uppercase-C.
Made a note of the breaking nature of this change in a new changelog
file.
Fixed recognizing SHIFT-TAB
refs: https://github.com/wez/wezterm/issues/2511
With a TERM of "screen-256color" or "screen", common attributes such
as bold are rendered with a \x0f AKA ^O AKA \017 code that
makes pagers such as less and streampager grumpy. In particular,
streampager renders as inverted "<0F>" and less as inverted "^O".
Add a new flag force_terminfo_render_to_use_ansi_sgr which makes the
TerminfoRenderer ignore the terminfo entries for common attributes,
instead using the standard ANSI/ECMA-48 sequences.
I've expanded the number of bits from 16->32 without impacting
the overall struct sizes and reserved 2 bits for super/subscript.
I refer to these as vertical alignment properties for conceptual
consistency with css.
SGR 73, 74, 75 are used to set super, sub and normal vertical alignment.
These are compatible with mintty.
However, mintty just added support for setting both attributes to render in
small caps in 06ac446049
(https://github.com/mintty/mintty/issues/1171)
According to its benchmarks, it's almost 2x faster than
unicode_segmentation. It doesn't appear to make a visible
difference to `time cat bigfile`, but I'll take anything
that gives more headroom for such little effort of switching.
Action is used to encode parsed terminal output and shuttle it between
the thread that does the parsing and the main gui thread that applies
it to the terminal model.
Take it down from 184 bytes to 40 bytes (on 64-bit systems). This seems
to boost `time cat bigfile` by reducing the runtime to ~40% of its prior
duration: down from 8s -> 4.5s on an M1 macbook air.
Size reductions achieved by Box'ing relatively less frequently
used enum variants. The kitty image data variant is particularly
large, and the Window variant is also pretty heavy.
There were two problems:
* We weren't correctly invalidating when the hover state changed
(a recent regression caused by recent caching changes)
* We'd underline every link with the same destination on hover,
not just the one under the mouse (longstanding wart)
Recent changes allow the application layer to reference the underlying
Lines directly, so we can restore the original and expected
only-highlight-under-the-mouse by switching to those newer APIs.
Adjust the cache values so that we know to also verify the current
highlight and invalidate.
I was a little surprised to see that this also works with mux client
panes: I was expecting to need to do some follow up on those because
they return copies of Line rather than references to them. That happens
to work because the mux client updates the hyperlinks at the time where
it inserts into its cache. The effect of that is that lines in mux
client panes won't update to new hyperlink rules if they were received
prior to a change in the config.
refs: https://github.com/wez/wezterm/issues/2496
Given this sequence:
ENABLE-UNDERLINE CRLF SGR-RESET
if the CRLF caused the terminal to scroll, the newly created line
at the bottom would be filled in with a "blank" cell that had
the underline attribute set.
That's because we're supposed to preserve the coloring in that
scenario, but we were also preserving other SGR attributes.
This commit explicitly clears out under, over and strikethrough
lines from these blank attributes.
refs: https://github.com/wez/wezterm/issues/2489
Move is_double_wide to a box; it is relatively rare to need
this and we're okay with it being a separate heap allocation
when it is needed if it reduces the size of Line in the common case.
I don't think these are really necessary any more; the implementation
cannot go out of bounds, so the worst that can happen is that we
don't return any changes.
refs: https://github.com/wez/wezterm/issues/2222
Adds Pane::for_each_logical_line_in_stable_range_mut and
Pane::with_lines_mut which allow iterating mutably over lines.
The idea is that this will allow the renderer to directly cache
data in the Line via its appdata without having to build cumbersome
external caching logic and managing cache keys.
This commit just swaps the implementation around for localpane
and sanity checks that the renderer functions.
Various overlays and the mux client don't properly implement these
yet and current warn at compile time and panic at runtime.
To follow is the logic to cache the data and make sure that it
works the way that I think before converting the other Pane
implementations.
It didn't really belong there; it was added as a bit of a hack
to propagate screen reverse video mode.
Move that to the RenderableDims struct and remove the related
bits from Line
Introduces a heap-based quad allocator that we cache on a per-line
basis, so if a line is unchanged we simply need to copy the previously
computed set of quads for it into the gpu quad buffer.
The results are encouraging wrt. constructing those quads; the
`quad_buffer_apply` is the cost of the copy operation, compare with
`render_screen_line_opengl` which is the cost of computing the quads;
it's 300x better at the p50 and >100x better at p95 for a full-screen
updating program:
full 2880x1800 screen top:
```
STAT p50 p75 p95
Key(quad_buffer_apply) 2.26µs 5.22µs 9.60µs
Key(render_screen_line_opengl) 610.30µs 905.22µs 1.33ms
Key(gui.paint.opengl) 35.39ms 37.75ms 45.88ms
```
However, the extra buffering does increase the latency of
`gui.paint.opengl` (the overall cost of painting a frame); contrast the
above with the latency in the same scenario with the current `main`
(rather than this branch):
```
Key(gui.paint.opengl) 19.14ms 21.10ms 28.18ms
```
Note that for an idle screen this latency is ~1.5ms but that is also true
of `main`.
While the overall latency in the histogram isn't a slam dunk,
running `time cat bigfile` is ~10% faster on my mac.
I'm sure there's something that can be shaved off to get a more
convincing win.
Allows the following assignment actions; I was just over-using z for
no real reason, I'm not suggesting that these are good assignments.
```
-- move the cursor backwards to the start of the current zone, or
-- to the prior zone if already at the start
{ key = 'z', mods = 'NONE', action = act.CopyMode 'MoveBackwardSemanticZone' },
-- move the cursor forwards to the start of the next zone
{ key = 'Z', mods = 'NONE', action = act.CopyMode 'MoveForwardSemanticZone' },
-- start selecting by zone: both the start point and the cursor
-- position will be expanded to the containing zone and the union
-- of those two will be used for the selection
{
key = 'z',
mods = 'CTRL',
action = act.CopyMode { SetSelectionMode = 'SemanticZone' },
},
-- like MoveBackwardSemanticZone by only considers zones of the
-- specified type
{ key = 'z', mods = 'ALT', action = act.CopyMode { MoveBackwardZoneOfType ='Output' }},
-- like MoveForwardSemanticZone by only considers zones of the
-- specified type
{ key = 'Z', mods = 'ALT', action = act.CopyMode { MoveForwardZoneOfType ='Output' }},
```
refs: https://github.com/wez/wezterm/issues/2346
Without the feature the build fails with:
--> src\escape\apc.rs:377:57
|
377 | let mut memory_info = MEMORY_BASIC_INFORMATION::default();
| ^^^^^^^ function or associated item not found in `MEMORY_BASIC_INFORMATION`
|
When `parse_first_as_vec` is parsing an OSC sequence (e.g.
`SetHyperlink`) that is terminated by the escaped form of ST (`ESC \`),
ensure that the ST sequence is included in the returned vector.
This is achieved by ensuring the VTParser has returned to the "ground"
state: i.e. the stored state after the `ESC` is processed is not enough
for `parse_first_as_vec` to terminate. We must also parse the `\` to
ensure that we return a complete span to the caller.
Fixes https://github.com/markbt/streampager/issues/57
`4` is actually defined as CMYK according to ITU-T Rec. T.416:
> A parameter substring for values 38 or 48 may be divided by one or more separators (03/10) into parameter elements,
> denoted as Pe. The format of such a parameter sub-string is indicated as:
>
> Pe : P ...
>
> Each parameter element consists of zero, one or more bit combinations from 03/00 to 03/09, representing the digits
> 0 to 9. An empty parameter element represents a default value for this parameter element. Empty parameter elements at
> the end of the parameter substring need not be included.
>
> The first parameter element indicates a choice between:
>
> 0 implementation defined (only applicable for the character foreground colour)
> 1 transparent;
> 2 direct colour in RGB space;
> 3 direct colour in CMY space;
> 4 direct colour in CMYK space;
> 5 indexed colour.
refs: 6e9a22e199 (commitcomment-79669016)
This commit extends the sgr color parser to support a wezterm
extension that I just made up:
```
printf "\e[48:4:255:0:0:60mhello\e0m"
```
The `4` is wezterm specific and denotes 4 channel color, in this case
RGBA. red is 255, green is 0, blue is 0 and alpha is 60; the values are
interpreted as u8 values.
CSI 38 (fg), 48 (bg) and 58 (underline) support this.
refs: https://github.com/wez/wezterm/issues/2313
This doesn't really change any behavior, but adjusts the types
such that CSIs that set colors have the potential to track the
alpha channel and that can make it through to the GUI/render layer.
