Previously, the mux layer had no internal understanding of titles other
than the Pane::get_title method to return state from a pane.
Users have asked for ways to explicitly set titles on windows and tabs,
so this commit is a step towards that.
The mux window and tab objects now store a title string.
The terminal layer now emits Alert::WindowTitleChanged when the window
title is changed via eg: OSC 0 or OSC 2.
The mux layer will respond to Alert::WindowTitleChanged by resolving the
window that corresponds to the source pane and amending its title.
The MuxWindow and MuxTab objects now provide accessor methods for the
title.
TabInformation (as used by format-tab-title and format-window-title) now
exposes the underlying window_id as well as tab_title and window_title.
The tab title can be changed via the lua MuxTab type, but there is not
currently an escape sequence associated with this.
The defaults for format-tab-title and format-window-title don't
currently consider these new title strings.
refs: https://github.com/wez/wezterm/issues/1598
This enables tentative support for https://sw.kovidgoyal.net/kitty/keyboard-protocol
It's only been lightly tested with the notcurses-input program and
eyeballed against a few random keypresses in kitty running
`printf "\x1b[=11u" ; od -c`
I tried with neovim, but it doesn't seem like the version available
in Fedora 36 supports this yet.
refs: https://github.com/wez/wezterm/issues/1141
Main thing to note here is that the open crate has deprecated
open::that_in_background, but made open::that non-blocking.
I think this is OK, but I'm a little cagey about what will
happen with this on Windows. We may need to spawn our own
thread for this if things go awry.
Avoid using serde for mapping between Lua and Rust for the `Config`
struct.
This improves the build speed of the config crate by 2x; it goes down
from 30 seconds to 9 seconds on my 5950x.
I want to make some changes to the scrollback structure that
first require routing some operations through an accessor
method, so this commit does that.
It should have no functional difference.
I've bundled this into termwiz's UnicodeVersion type as that is
a similar concept that is already routed through to the appropriate
function.
refs: https://github.com/wez/wezterm/issues/1888
I'm not totally sure this is all there is to it, but in #1850
the response is showing up after vim was exited, so it seems like
it didn't fully receive these responses.
refs: #1850
We're now capable of remembering an alpha value for everything
in the palette and the main window theme, but not the tab bar theme.
Whether the alpha is correctly respected at render time is a different
story!
refs: #1835
The bug here was that each paint call in a window would update
the focus state of its panes to reflect the one that had focus.
However, it didn't account for the actual window focus; it would
just assume that it was focused.
The result was that the perceived focus would alternate between each of
the windows in the wezterm process, and if you were running an
application that had enabled focus tracking, those events could cause a
repaint and drive up the CPU utilization.
This commit addresses that by gating the focus update to only occur
when we have the focus, and for extra safety, avoid generating focus
events at the terminal layer if the new state matches the current state.
refs: https://github.com/wez/wezterm/issues/1838
Go directly to the underlying env_logger crate, as pretty_env_logger
hasn't been updated in some time, and I'd like to be able to redirect
the log output to a file more directly, and that feature is in a newer
version of the env logger than pretty_env_logger was pulling in.
This persuades vim to set ttymouse=sgr by default.
We're carefully sitting below 279 which triggers
some queries for things that we don't respond to yet.
refs: https://github.com/wez/wezterm/issues/1825
I think this looks less jarring than the yellowish selection color,
and the translucency looks nicer than changing the fg color completely
black as it did previously.
* gui: improve mouse text selection
* implement mouse press capture between the terminal and UI, so when you
start selecting text from the terminal the tabs won't activate and
vice-versa
* selecting from the top and bottom lines won't scroll the viewport
anymore, it will only scroll if the mouse is moved out of line bounds
* change cell selection so that it behaves like text selection usually
does in other popular software
refs: https://github.com/wez/wezterm/issues/1199
refs: https://github.com/wez/wezterm/issues/1386
refs: https://github.com/wez/wezterm/issues/354
Previously, we'd just default the resize quirk on for all programs on
Windows.
That pessimizes the otherwise fine behavior of `wezterm ssh` or mux
connections to unixy platforms.
This commit moves the quirk out of the config trait and makes it
a runtime property of the terminal, and then arranges for it
to be set when we know that we set up a conpty for the terminal.
refs: #1265
* #217 DECSDM, and commented pseudocode for improved handling of transparent image cells
* oops forgot cargo fmt --all
* #217 set initial palette colors to match VT340
* #217 cleanup color_map initialization, fix sixel scrolling
* #217 remove large comment - transparency discussion for another time
This change also allows removing the dep on the palette crate,
which I found to be difficult to use (API changed often, and relied
on a lot of `.into` that was hard to follow and reconcile across
upgrades). We already pulled in the csscolorparse crate as an indirect
dep of colorgrad, so we can replace the color conversion we need for
sixel with that crate while we're in here.
refs: #1615
Previously overlooked because we didn't render or otherwise
change behavior: after running vttest and running ls, some
lines still had double width/height set.
This ensures that we remove that attribute when clearing
the screen.
This was used by the mux client when the session is tardy.
I've heard feedback that the greying out is distracting and not
especially useful, so I don't think this is any great loss.
This commit allows the following configuration:
```
wezterm -n --config 'colors = { selection_fg = "clear", selection_bg = "rgba:50% 50% 50% 50%" }'
```
which sets the selection_bg to fully transparent, and selection_bg to
50% transparent gray.
When selection_fg is fully transparent we'll use the normal fg color.
When selection_bg is partially (or fully!) transparent, it will be
alpha blended over the current cell background color.
To support this, the config file will now accept rgba colors specified
as 4 whitespace delimited numeric values. If a value ends with `%` it
is interpreted as a number in the range 0-100. Otherwise, it is
interpreted as a number in the range 0-255. The 4 values are
red, green, blue, alpha.
At this time, only the selection_fg and selection_bg settings accept
alpha values.
refs: #1615
Resolves a little bit of the awkward duplication of color types
between some of the crates by factoring them a little bit better.
This is prep for allowing specifying alpha for some colors
in the config.
This commit refines bidi property handling:
* experimental_bidi has been split into two new configuration settings;
`bidi_enabled` (which controls whether the terminal performs implicit
bidi processing) and `bidi_direction` which specifies the base
direction and whether auto detection is enabled.
* The `Line` type can now store those bidi properties (they are actually
split across 3 bits representing enabled, auto-detection and
direction)
* The terminal now has a concept of active bidi properties and default
bidi properties
* The default properties are pulled from the wezterm configuration
* active bidi properties are potentially set via escape sequences,
BDSM (which sets bidi_enabled) and SCP (which sets bidi_direction).
We don't support the 2501 temporary dec private mode suggested by
the BIDI recommendation doc at this time.
* When creating new `Line`'s or clearing from the start of a `Line`, the
effective bidi properties are computed (from the active props,
falling back to default propr) and applied to the `Line`.
* When rendering the line, we now look at its bidi properties instead
of just the global config.
The default bidi properties are `bidi_enabled: false` and
`bidi_direction: LeftToRight` which corresponds to the typical
bidi-unaware mode of most terminals.
It is possible to live reload the config to change the effective
defaults, but note that they apply, by design, to new lines being
processed through the terminal. That means existing output is
left unaffected by a config reload, but subsequently printed lines
will respect it. Pressing CTRL-L or otherwise contriving to have
the running application refresh its display should cause the
refreshed display to update and apply the new bidi mode.
refs: #784
This setting now allows specifying what the canonical format is;
previously it was a boolean that meant "don't change anything"
if false, and rewrite to CRLF if true.
It's now an enum with None, CR, LF, and CRLF variants that express
more control.
The config accepts true (maps to CRLF) and false (maps to None)
for backwards compatibility.
The default behavior is unchanged by this commit, however, I did
uncover a bug in the canonicalizer for inputs like `\r\r\n`.
refs: #1575
This commit enables the following config to work for local (not mux yet!)
panes:
```lua
local wezterm = require 'wezterm'
wezterm.on("format-tab-title", function(tab, tabs, panes, config, hover, max_width)
if tab.is_active then
return {
{Background={Color="blue"}},
{Text=" " .. tab.active_pane.title .. " "},
}
end
local has_unseen_output = false
for _, pane in ipairs(tab.panes) do
if pane.has_unseen_output then
has_unseen_output = true
break;
end
end
if has_unseen_output then
return {
{Background={Color="Orange"}},
{Text=" " .. tab.active_pane.title .. " "},
}
end
return tab.active_pane.title
end)
return {
}
```
refs: https://github.com/wez/wezterm/discussions/796
This commit decomposes the main get_semantic_zones method into two
parts:
* A per-line portion, where the line ranges are cached (invalidated on
change)
* The overall screen portion, where the line ranges are merged
This changes the overall complexity of computing zones from
O(width * scrollback-height)
To an incremental:
O((width * number of changed lines since last query) + scrollback-height)
You can see some samples of elapsed time below; those show the times for
running both the old and the new implementation on the same data. The
number of lines/zones in the scrollback increases with each call and you
can see that the new implementation is a bit faster anyway at low
volumes but is significantly faster as the number of lines/zones
increases, because the amount of work is reduced.
```
get_semantic_zones: 71.708µs
get_semantic_zones_new: 59.041µs
get_semantic_zones: 71.166µs
get_semantic_zones_new: 9.166µs
get_semantic_zones: 44.291µs
get_semantic_zones_new: 4.208µs
get_semantic_zones: 69.791µs
get_semantic_zones_new: 10.291µs
get_semantic_zones: 59.375µs
get_semantic_zones_new: 7.958µs
get_semantic_zones: 52.5µs
get_semantic_zones_new: 4.5µs
get_semantic_zones: 91.791µs
get_semantic_zones_new: 20.916µs
get_semantic_zones: 229.916µs
get_semantic_zones_new: 109.208µs
get_semantic_zones: 224.125µs
get_semantic_zones_new: 15.208µs
get_semantic_zones: 291.791µs
get_semantic_zones_new: 11.833µs
get_semantic_zones: 238.875µs
get_semantic_zones_new: 12.625µs
get_semantic_zones: 468.458µs
get_semantic_zones_new: 126.583µs
get_semantic_zones: 460.5µs
get_semantic_zones_new: 25.666µs
get_semantic_zones: 358.291µs
get_semantic_zones_new: 19.541µs
get_semantic_zones: 436.833µs
get_semantic_zones_new: 17.875µs
get_semantic_zones: 313.166µs
get_semantic_zones_new: 15.25µs
get_semantic_zones: 333.958µs
get_semantic_zones_new: 16.541µs
get_semantic_zones: 364.666µs
get_semantic_zones_new: 14.041µs
```
