- Confirming a completion now runs the command immediately
- Hitting `enter` on a line with a command now runs it
- The output of commands gets folded away and replaced with a custom
placeholder
- Eliminated ambient context
<img width="1588" alt="image"
src="https://github.com/zed-industries/zed/assets/482957/b1927a45-52d6-4634-acc9-2ee539c1d89a">
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Closes https://github.com/zed-industries/zed/issues/12234 by making both
default keymap and the menu `Delete` action declarations to have the
same `skip_prompt` value.
`Trash` action got more explicit `skip_prompt` declarations in this PR,
but those were the defaults already, so not changed.
Now, `Delete` action in the project panel will always show a prompt
before removing, both on the keystroke and menu item click.
To note, VSCode does skips prompt for the `Trash` action, so we might
want to change that too (later?), the PR does not alter it.
Release Notes:
- Shows Delete action binding keys in the project panel context menu
([12234](https://github.com/zed-industries/zed/issues/12234))
The default keymap uses alt-enter for `SelectAllMatches` for `context:
BufferSearchBar`.
Jetbrains keymap uses alt-enter for `ToggleCodeActions` for `context:
Editor`.
When focusing on search bar, currently alt-enter does not perform
`SelectAllMatches`, whereas `ToggleCodeActions` is triggered instead,
because search bar's text input element has `context: Editor
mode=single_line`.
This PR restricts `ToggleCodeActions` to `Editor (full mode)` context to
allow `SelectAllMatches` to be triggered for alt-enter when the search
bar is active.
Release Notes:
- Fixed alt-enter with JetBrains keymap ignoring `search::SelectAllMatches` in certain contexts ([11840](https://github.com/zed-industries/zed/issues/11840))
Release Notes:
- vim: Added `]d/[d` for go to prev/next diagnostic
- vim: Added `]c/[c` to go to prev/next git change (`:diff` and
`:revert` show the diff and revert it)
- vim: Added `g cmd-d` for go to implementation
This PR removes the wiring for `assistant2` that hooks it up to Zed.
Since we're focusing in on improving the current assistant, we don't
need this present in Zed.
I left the `assistant2` crate intact for now, to make it easier to
reference any code from it.
Release Notes:
- N/A
Release Notes:
- Improved tasks modal by highlighting a distinction between a task
template and concrete task instance and surfacing available keybindings
more prominently. Task templates are now always available in the modal,
even if there's already a history entry with the same label.
- Changed default key binding for "picker::UseSelectedQuery" to `opt-e`.
This is my stab at #7709
I realize the code is flawed. There's no test coverage, I'm using
`clone()` and there are probably better ways to hook into the events.
Also, I didn't know what context to use for the keybinding. But maybe
with some pointers from someone who actually know what they're doing, I
can get this shippable.
Release Notes:
- vim: Added ctrl-6 for
[alternate-file](https://vimhelp.org/editing.txt.html#CTRL-%5E) to
navigate back and forth between two buffers.
https://github.com/zed-industries/zed/assets/261929/2d10494e-5668-4988-b7b4-417c922d6c61
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- vim: Added support for the changelist. `g;` and `g,` to the
previous/next change
- vim: Added support for the `'.` mark
- vim: Added support for `gi` to resume the previous insert
Release Notes:
- vim: Added support for buffer-local marks (`'a-'z`) and some builtin
marks `'<`,`'>`,`'[`,`']`, `'{`, `'}` and `^`. Global marks (`'A-'Z`),
and other builtin marks (`'0-'9`, `'(`, `')`, `''`, `'.`, `'"`) are not
yet implemented. (#5122)
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Part of https://github.com/zed-industries/zed/issues/4523
Added two new actions with the default keybindings
```
"cmd-'": "editor::ToggleHunkDiff",
"cmd-\"": "editor::ExpandAllHunkDiffs",
```
that allow to browse git hunk diffs in Zed:
https://github.com/zed-industries/zed/assets/2690773/9a8a7d10-ed06-4960-b4ee-fe28fc5c4768
The hunks are dynamic and alter on user folds and modifications, or
toggle hidden, if the modifications were not adjacent to the expanded
hunk.
Release Notes:
- Added `editor::ToggleHunkDiff` (`cmd-'`) and
`editor::ExpandAllHunkDiffs` (`cmd-"`) actions to browse git hunk diffs
in Zed
TODO:
- [x] Don't immediately seg fault
- [x] Implement for directories
- [x] Add cmd-delete to remove files
- [ ] ~~Add setting for trash vs. delete~~ You can just use keybindings
to change the behavior.
fixes https://github.com/zed-industries/zed/issues/7228
fixes https://github.com/zed-industries/zed/issues/5094
Release Notes:
- Added a new `project_panel::Trash` action and changed the default
behavior for `backspace` and `delete` in the project panel to send a
file to the systems trash, instead of permanently deleting it
([#7228](https://github.com/zed-industries/zed/issues/7228),
[#5094](https://github.com/zed-industries/zed/issues/5094)). The
original behavior can be restored by adding the following section to
your keybindings:
```json5
[
// ...Other keybindings...
{
"context": "ProjectPanel",
"bindings": {
"backspace": "project_panel::Delete",
"delete": "project_panel::Delete",
}
}
]
Release Notes:
- vim: Support `-` to go to `parent directory` of the project panel.
As mentioned in the comments of #11073 this adds support for netrw's `-`
to go to the parent directory in the project panel. Again tested on
linux only.
- N/A
Release Notes:
- vim: Support `g g`/`G` to go to top/bottom of the project panel.
In vim type environments i usually expect to be able to jump to the top
and bottom and i was confused as to why that wasn't possible in the
project panel. So i added it. If anyone using different keymaps also
thinks this might be useful i would be happy to add other defaults. I
think for vim mode it is the most useful though, because you tend to not
use your mouse in vim mode.
This is my first contribution to any rust project, but it seemed like a
good starting point.
The function select_last() is inspired by select_first.
I was also thinking about adding a bigger jump keybinding, that would
jump for example 5 entries up / down, with vim default keybindings "{" /
"}".
FYI: I tested this on linux only and don't have access to any macos
machines.
- N/A
Currently in the *Auto Height Editor* story the backspace key is not
working when you type into the Editor.
The same thing is true for the *Picker* story as one is not able to
backspace...
By adding an entry in the keymap file
```rust
assets/keymaps/storybook.json
```
both of these issues are solved...
Release Notes:
- N/A
If the assistant has already emitted some text, we will leave the
assistant message but maintain the cursor on the previous user message,
so that the user can easily discard the message by submitting again.
If no output was emitted yet, we simply delete the empty assistant
message.
Release Notes:
- N/A
This is a crate only addition of a new version of the AssistantPanel.
We'll be putting this behind a feature flag while we iron out the new
experience.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Co-authored-by: Nate Butler <nate@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Max <max@zed.dev>
This PR adds an action to expand the excerpts lines of context in a
multibuffer.
Release Notes:
- Added an `editor::ExpandExcerpts` action (bound to `shift-enter` by
default), which can expand the excerpt the cursor is currently in by 3
lines. You can customize the number of lines by rebinding this action
like so:
```json5
// In your keybindings array...
{
"context": "Editor && mode == full",
"bindings": {
"shift-enter": ["editor::ExpandExcerpts", { "lines": 5 }],
}
}
```
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Max <max@zed.dev>
This implements some of #10457.
Release notes:
- Added `g c c` and `g c` to Vim keybindings to toggle comments in
normal and visual mode respectively.
- Added `g ]` and `g [` to Vim keybindings to go to next and previous
diagnostic error.
- Changed `[ x` and `] x` (which select larger/smaller syntax node) in
Vim mode to also work in visual mode.
In addition to `ctrl-tab` and `ctrl-shift-tab`, VS Code allows changing
the selection in the tab switcher via the up and down arrow keys.
Release Notes:
- Added bindings to allow `up` and `down` arrow keys to be used while
the tab switcher is open.
This PR changes ways the Find/Replace functionality in the
Buffer/Project Search is accessible via shortcuts. It makes those panels
work the same way as in VS Code and Sublime Text.
The details are described in the issue: [Make Find/Replace easier to
use](https://github.com/zed-industries/zed/issues/9142)
There's a difficulty with the Linux keybindings:
VS Code uses on MacOS (this PR replicates it):
| Action | Buffer Search | Project Search |
| --- | --- | --- |
| Find | `cmd-f` | `cmd-shift-f` |
| Replace | `cmd-alt-f` | `cmd-shift-h` |
VS Code uses on Linux (this PR replicates all but one):
| Action | Buffer Search | Project Search |
| --- | --- | --- |
| Find | `ctrl-f` | `ctrl-shift-f` |
| Replace | `ctrl-h` ❗ | `ctrl-shift-h` |
The problem is that `ctrl-h` is already taken by the `editor::Backspace`
action in Zed on Linux.
There's two options here:
1. Change keybinding for `editor::Backspace` on Linux to something else,
and use `ctrl-h` for the "replace in buffer" action.
2. Use some other keybinding on Linux in Zed. This PR introduces
`ctrl-r` for this purpose, though I'm not sure it's the best choice.
What do you think?
fixes#9142
Release Notes:
- Improved access to "Find/Replace in Buffer" and "Find/Replace in
Files" via shortcuts (#9142).
Optionally, include screenshots / media showcasing your addition that
can be included in the release notes.
- N/A
For #4965
There are still some minor issues:
1. When change the surround and delete the surround, we should also
decide whether there are spaces inside after deleting/replacing
according to whether it is open parentheses, and replace them
accordingly, but at present, delete and change, haven't done this
adaptation for current pr, I'm not sure if I can fit it in the back or
if it needs to be fitted together.
2. In the selection mode, pressing s plus brackets should also trigger
the Add Surrounds function, but this MR has not adapted the selection
mode for the time being, I think we need to support different add
behaviors for the three selection modes.(Currently in select mode, s is
used for Substitute)
3. For the current change surrounds, if the user does not find the
bracket that needs to be matched after entering cs, but it is a valid
bracket, and will wait for the second input before failing, the better
practice here should be to return to normal mode if the first bracket is
not found
4. I reused BracketPair in language, but two of its properties weren't
used in this mr, so I'm not sure if I should create a new struct with
only start and end, which would have less code
I'm not sure which ones need to be changed in the first issue, and which
ones can be revised in the future, and it seems that they can be solved
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Resolves#4273
@algora-pbc /claim #4273
This is a work-in-progress. The process for `gn` command is:
- maintain updated vim.workspace_state.search.initial_query
- modify editor.select_next_state with
vim.workspace_state.search.initial_query
- use editor.select_next()
- merge selections
- set editor.select_next_state to previous state
To make this possible, several private members and editor structures are
made public. `gN` is not yet implemented and the cursor still does not
jump to the next selection in the first use.
Maybe there is an better way to do this?
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
These tasks are not considered for reruns with `task::Rerun`.
This PR tears a bunch of stuff up around tasks:
- `menu::SecondaryConfirm` for tasks is gonna spawn a task without
storing it in history instead of being occupied by oneshot tasks. This
is done so that cmd-clicking on the menu item actually does something
meaningful.
- `menu::UseSelectedQuery` got moved into picker, as tasks are it's only
user (and it doesn't really make sense as a menu action).
TODO:
- [x] add release note
- [x] Actually implement the core of this feature, which is spawning a
task without saving it in history, lol.
Fixes#9804
Release Notes:
- Added "fire-and-forget" task spawning; `menu::SecondaryConfirm` in
tasks modal now spawns a task without registering it as the last spawned
task for the purposes of `task::Rerun`. By default you can spawn a task
in this fashion with cmd+enter or by holding cmd and clicking on a task
entry in a list. Spawning oneshots has been rebound to `option-enter`
(under a `picker::ConfirmInput` name). Fixes#9804 (breaking change)
- Moved `menu::UseSelectedQuery` action to `picker` namespace (breaking
change).
The Tab Switcher implementation (#7653):
- `ctrl-tab` opens the Tab Switcher and moves selection to the
previously selcted tab. It also cycles selection forward.
- `ctrl-shift-tab` opens the Tab Switcher and moves selection to the
last tab in the list. It also cycles selection backward.
- Tab is selected and the Tab Switcher is closed on the shortcut
modifier key (`ctrl` by default) release.
- List items are in reverse activation history order.
- The list reacts to the item changes in background (new tab, tab
closed, tab title changed etc.)
Intentionally not in scope of this PR:
- File icons
- Close buttons
I will come back to these features. I think they need to be implemented
in separate PRs, and be synchronized with changes in how tabs are
rendered, to reuse the code as it's done in the current implementation.
The Tab Switcher looks usable even without them.
Known Issues:
Tab Switcher doesn't react to mouse click on a list item. It's not a tab
switcher specific problem, it looks like ctrl-clicks are not handled the
same way in Zed as cmd-clicks. For instance, menu items can be activated
with cmd-click, but don't react to ctrl-click. Since the Tab Switcher's
default keybinding is `ctrl-tab`, the user can only click an item with
`ctrl` pushed down, thus preventing `on_click()` from firing.
fixes#7653, #7321
Release Notes:
- Added Tab Switcher which is accessible via `ctrl-tab` and
`ctrl-shift-tab` (#7653) (#7321)
Related issues:
- Unblocks #7356, I hope 😄
How it looks and works (it's only `ctrl-tab`'s and `ctrl-shift-tab`'s,
no `enter`'s or mouse clicks):
https://github.com/zed-industries/zed/assets/2101250/4ad4ec6a-5314-481b-8b35-7ac85e43eb92
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This adds a keybinding for an existing action. Notably, our bindings for
`Go To Type Definition` and `Go To Implementation` are swapped from
VSCode. We use `cmd` and `shift`, they use `shift` and `cmd`.
Release Notes:
- Added a keybinding for `editor::GoToImplementation`
Earlier versions where a simple find-replace of `cmd` => `ctrl`. In this
PR, I've gone over every keybinding individually and checked them.
Release Notes:
- Removed the `ShowContextMenu` action, it's only usage was in the
collab panel and it's been rebound to `SecondaryConfirm`
This pull request introduces a new `InlineCompletionProvider` trait,
which enables making `Editor` copilot-agnostic and lets us push all the
copilot functionality into the `copilot_ui` module. Long-term, I would
like to merge `copilot` and `copilot_ui`, but right now `project`
depends on `copilot`, which makes this impossible.
The reason for adding this new trait is so that we can experiment with
other inline completion providers and swap them at runtime using config
settings.
Please, note also that we renamed some of the existing copilot actions
to be more agnostic (see release notes below). We still kept the old
actions bound for backwards-compatibility, but we should probably remove
them at some later version.
Also, as a drive-by, we added new methods to the `Global` trait that let
you read or mutate a global directly, e.g.:
```rs
MyGlobal::update(cx, |global, cx| {
});
```
Release Notes:
- Renamed the `copilot::Suggest` action to
`editor::ShowInlineCompletion`
- Renamed the `copilot::NextSuggestion` action to
`editor::NextInlineCompletion`
- Renamed the `copilot::PreviousSuggestion` action to
`editor::PreviousInlineCompletion`
- Renamed the `editor::AcceptPartialCopilotSuggestion` action to
`editor::AcceptPartialInlineCompletion`
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Kyle <kylek@zed.dev>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
`alt+left/right` are never used on Linux.
The Linux keymap still has some other issues, but these shortcuts in
particular are really common when editing text.
Release Notes:
- N/A
This PR adds support for handling action releases — events that
are fired when the user releases all the modifier keys that were part of
an action-triggering shortcut.
If the user holds modifiers and invokes several actions sequentially via
shortcuts (same or different), only the last action is "released" when
its modifier keys released.
~The following methods were added to `Div`:~
- ~`capture_action_release()`~
- ~`on_action_release()`~
- ~`on_boxed_action_release()`~
~They work similarly to `capture_action()`, `on_action()` and
`on_boxed_action()`.~
See the implementation details in [this
comment](https://github.com/zed-industries/zed/pull/8782#issuecomment-2009154646).
Release Notes:
- Added a fast-switch mode to the file finder: hit `p` or `shift-p`
while holding down `cmd` to select a file immediately. (#8258).
Related Issues:
- Implements #8757
- Implements #8258
- Part of #7653
Co-authored-by: @ConradIrwin
**Summary**:
- Removed reply message from message_menu
- Made render_popover_buttons a bit more reusable
- Fixed issue that you can't close the reply/edit preview when you are
not focusing the message editor
- Notify only the new people that were mentioned inside the edited
message
**Follow up**
- Fix that we update the notification message for the people that we
mentioned already
- Fix that we remove the notification when a message gets deleted.
- Fix last acknowledge message id is in correct now
**Todo**:
- [x] Add tests
- [x] Change new added bindings to the `Editor::Cancel` event.
Release Notes:
- Added editing of chat messages
([#6707](https://github.com/zed-industries/zed/issues/6707)).
<img width="239" alt="Screenshot 2024-03-09 at 11 55 23"
src="https://github.com/zed-industries/zed/assets/62463826/b0949f0d-0f8b-43e1-ac20-4c6d40ac41e1">
<img width="240" alt="Screenshot 2024-03-13 at 13 34 23"
src="https://github.com/zed-industries/zed/assets/62463826/d0636da2-c5aa-4fed-858e-4bebe5695ba7">
---------
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Antonio <antonio@zed.dev>
Resurrected this from some assistant work I did in Spring of 2023.
- [x] Resurrect streaming responses
- [x] Use streaming responses to enable AI via Zed's servers by default
(but preserve API key option for now)
- [x] Simplify protobuf
- [x] Proxy to OpenAI on zed.dev
- [x] Proxy to Gemini on zed.dev
- [x] Improve UX for switching between openAI and google models
- We current disallow cycling when setting a custom model, but we need a
better solution to keep OpenAI models available while testing the google
ones
- [x] Show remaining tokens correctly for Google models
- [x] Remove semantic index
- [x] Delete `ai` crate
- [x] Cloud front so we can ban abuse
- [x] Rate-limiting
- [x] Fix panic when using inline assistant
- [x] Double check the upgraded `AssistantSettings` are
backwards-compatible
- [x] Add hosted LLM interaction behind a `language-models` feature
flag.
Release Notes:
- We are temporarily removing the semantic index in order to redesign it
from scratch.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Max <max@zed.dev>
