Three changes: two of which are changing `while let` construct to `if
let` as they unconditionally broke and one of which was removing a loop
in the `start_default_prettier` as it unconditionally broke in the
control flow for match installation task: the diff for this is larger
than needed as removing the loop changed a lot of indentation for
`rustfmt`.
### Description
Currently, there are some issues with input handling on Windows:
#### 1. Direct crash when encountering IME input.
https://github.com/zed-industries/zed/assets/14981363/598f7272-1948-4a42-99c5-2ef7b9162a1e
#### 2. Handling messages every 1/60 seconds in the main thread. Despite
being named "immediate_handle," it's not exactly immediate.
```rust
// actually halt here
let wait_result =
unsafe { DCompositionWaitForCompositorClock(Some(&[self.inner.event]), INFINITE) };
// compositor clock ticked so we should draw a frame
if wait_result == 1 {
unsafe { invalidate_thread_windows(GetCurrentThreadId()) };
while unsafe { PeekMessageW(&mut msg, HWND::default(), 0, 0, PM_REMOVE) }.as_bool()
```
#### 3. According to Windows recommendations, character input should be
obtained using `WM_CHAR` instead of `WM_KEYDOWN`. Additionally, there
are problems with the handling within `WM_CHAR`.
```rust
fn handle_char_msg(&self, wparam: WPARAM) -> LRESULT {
let mut callbacks = self.callbacks.borrow_mut();
if let Some(callback) = callbacks.input.as_mut() {
let modifiers = self.current_modifiers();
let msg_char = wparam.0 as u8 as char; // these are u16 chars, cant treat them as u8
```
And, we don't handle `WM_SYSKEYDOWN` properly, which leads to `Alt + F4`
not working.
Release Notes:
- N/A
This is just a refactor. I noticed that we now have a `project_core`
crate, which mainly contains the `Worktree` type and its private
helpers, plus the project's settings.
In this PR, I've renamed that crate to `worktree` and did some minor
simplification to its module structure. I also extracted a new
`WorktreeSettings` settings type from the `ProjectSettings`, so that the
worktree settings could live in the worktree crate. This way, the crate
is now exclusively about worktree logic.
Release Notes:
- N/A
In this PR, we've added two new methods that LSP extensions can call:
* `shell_env()`, for retrieving the environment variables set in the
user's default shell in the worktree
* `which(command)`, for looking up paths to an executable (accounting
for the user's shell env in the worktree)
To test this out, we moved the `uiua` language support into an
extension. We went ahead and removed the built-in support, since this
language is extremely obscure. Sorry @mikayla-maki. To continue coding
in Uiua in Zed, for now you can `Add Dev Extension` from the extensions
pane, and select the `extensions/uiua` directory in the Zed repo. Very
soon, we'll support publishing these extensions so that you'll be able
to just install it normally.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
This PR provides WASM extensions with write access to their own specific
working directory under the Zed `extensions` dir. This directory is set
as the extensions `current_dir` when they run. Extensions can return
relative paths from the `Extension::language_server_command` method, and
those relative paths will be interpreted relative to this working dir.
With this functionality, most language servers that we currently build
into zed can be installed using extensions.
Release Notes:
- N/A
This reduces the server time to compute the hash from 40ms to 5µs,
which should remove this as a noticable chunk of CPU time in production.
(An attacker who has access to our database will now need only 10^54
years of CPU time instead of 10^58 to brute force a token).
Release Notes:
- Improved sign in latency by 40ms.
This PR adds an `zed: Install Local Extension` action, which lets you
select a path to a folder containing a Zed extension, and install that .
When you select a directory, the extension will be compiled (both the
Tree-sitter grammars and the Rust code for the extension itself) and
installed as a Zed extension, using a symlink.
### Details
A few dependencies are needed to build an extension:
* The Rust `wasm32-wasi` target. This is automatically installed if
needed via `rustup`.
* A wasi-preview1 adapter WASM module, for building WASM components with
Rust. This is automatically downloaded if needed from a `wasmtime`
GitHub release
* For building Tree-sitter parsers, a distribution of `wasi-sdk`. This
is automatically downloaded if needed from a `wasi-sdk` GitHub release.
The downloaded artifacts are cached in a support directory called
`Zed/extensions/build`.
### Tasks
UX
* [x] Show local extensions in the Extensions view
* [x] Provide a button for recompiling a linked extension
* [x] Make this action discoverable by adding a button for it on the
Extensions view
* [ ] Surface errors (don't just write them to the Zed log)
Packaging
* [ ] Create a separate executable that performs the extension
compilation. We'll switch the packaging system in our
[extensions](https://github.com/zed-industries/extensions) repo to use
this binary, so that there is one canonical definition of how to
build/package an extensions.
### Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
### Description
This is a part of #8809 , impl the following functions:
- `os_version`
- `local_timezone`
- `double_click_interval`
- `set_cursor_style`
- `open_url`
- `reveal_path`
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR moves the Clippy configuration up to the workspace level.
We're using the [`lints`
table](https://doc.rust-lang.org/cargo/reference/workspaces.html#the-lints-table)
to configure the Clippy ruleset in the workspace's `Cargo.toml`.
Each crate in the workspace now has the following in their own
`Cargo.toml` to inherit the lints from the workspace:
```toml
[lints]
workspace = true
```
This allows for configuring rust-analyzer to show Clippy lints in the
editor by using the following configuration in your Zed `settings.json`:
```json
{
"lsp": {
"rust-analyzer": {
"initialization_options": {
"check": {
"command": "clippy"
}
}
}
}
```
Release Notes:
- N/A
This PR sets up a `cargo xtask clippy` command for running `cargo
clippy` with our defined set of options.
The intent is to make this easier to manage as we start enabling more
Clippy rules.
Release Notes:
- N/A
This PR upgrades our [`bitflags`](https://crates.io/crates/bitflags)
dependency to v2.4.2.
This also fixes an error that was seen when running `clippy`:
```
error: &-masking with zero
--> crates/fsevent/src/fsevent.rs:19:1
|
19 | / bitflags! {
20 | | #[repr(C)]
21 | | pub struct StreamFlags: u32 {
22 | | const NONE = 0x00000000;
... |
46 | | }
47 | | }
| |_^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#bad_bit_mask
= note: `#[deny(clippy::bad_bit_mask)]` on by default
= note: this error originates in the macro `__impl_bitflags` which comes from the expansion of the macro `bitflags` (in Nightly builds, run with -Z macro-backtrace for more info)
```
Fixes#8681.
Release Notes:
- N/A
This PR adds **internal** ability to run arbitrary language servers via
WebAssembly extensions. The functionality isn't exposed yet - we're just
landing this in this early state because there have been a lot of
changes to the `LspAdapter` trait, and other language server logic.
## Next steps
* Currently, wasm extensions can only define how to *install* and run a
language server, they can't yet implement the other LSP adapter methods,
such as formatting completion labels and workspace symbols.
* We don't have an automatic way to install or develop these types of
extensions
* We don't have a way to package these types of extensions in our
extensions repo, to make them available via our extensions API.
* The Rust extension API crate, `zed-extension-api` has not yet been
published to crates.io, because we still consider the API a work in
progress.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This lets us run rustc_demangle on the backtrace, which helps the Slack
view significantly.
We're also now uploading files to digital ocean's S3 equivalent (with a
1 month expiry) instead of to Slack.
This PR paves the way for (but does not yet implement) sending this data
to clickhouse too.
Release Notes:
- N/A
This practice makes it difficult to locate todo!s in my code when I'm
working. Let's take out the bang if we want to keep doing this.
Release Notes:
- N/A
After upgrading to Wasmtime 18, we got crashes when running Zed in debug
mode. While bisecting the Wasmtime commits and trying to identify the
source of the crash, we noticed this Wasmtime PR, which increased the
stack size of background threads in an example. This alerted us to the
possibility that a stack overflow might be happening due to a lot of
stack usage by cranelift.
https://github.com/bytecodealliance/wasmtime/pull/7651
Release Notes:
- N/A
Co-authored-by: Marshall <marshall@zed.dev>
This PR introduces a new `command_palette_hooks` crate that contains the
types used to hook into the behavior of the command palette.
The `CommandPaletteFilter` was previously extracted to the `copilot`
crate in #7095, solely because that was the earliest ancestor of the
crates that depended on it.
The `CommandPaletteInterceptor` was still defined in `command_palette`
itself.
Both of these types were consumed by other crates wanting to influence
the behavior of the command palette, but required taking a dependency on
the entire `command_palette` crate in order to gain access to these
hooks.
By moving them out into their own crate, we can improve the compile
order and make crates like `vim` able to begin building sooner without
having to wait for `command_palette` to finish compiling.
Here's a comparison of the compilation graph before and after (ignore
the timings):
#### Before
<img width="332" alt="Screenshot 2024-02-25 at 12 42 29 PM"
src="https://github.com/zed-industries/zed/assets/1486634/a57c662e-fbc2-41ab-9e30-cca17afa6c73">
#### After
<img width="362" alt="Screenshot 2024-02-25 at 12 51 15 PM"
src="https://github.com/zed-industries/zed/assets/1486634/c1a6d29c-b607-4604-8f1b-e5d318bf8849">
Release Notes:
- N/A
This PR removes the unused crates for plugin support.
We're currently exploring Wasm-based extensions, and it's unlikely that
we'll be reusing any of this existing work.
Release Notes:
- N/A
This is a follow up to #7945. The current behaviour reads the locale and
infers from that which type of time format should be used (12 hour/24
hour).
However, in macOS you can override this behaviour, e.g. you can use
en_US locale but still use the 24 hour clock format (Can be customized
under Settings > General > Date & Format > 24-hour time). You can even
customize the date format.
This PR uses the macOS specific `CFDateFormatter` API, which outputs
time format strings, that respect those settings.
Partially fixes#7956 (as its not implemented for linux)
Release Notes:
- Added localization support for all macOS specific date and time
configurations in chat