This PR upgrades `async-tungstenite` to v17.0.3.
We previously attempted upgrading `async-tungstenite` in #15039, but
broke authentication with collab in the process.
Upon further investigation, I determined that the root cause is due to
this change in `tungstenite` v0.17.0:
> Overhaul of the client's request generation process. Now the users are
able to pass the constructed `http::Request` "as is" to
`tungstenite-rs`, letting the library to check the correctness of the
request and specifying their own headers (including its own key if
necessary). No changes for those ones who used the client in a normal
way by connecting using a URL/URI (most common use-case).
We _were_ relying on passing an `http::Request` directly to
`tungstenite`, meaning we did not benefit from the changes to the common
path (of passing a URL/URI).
This meant that—due to changes in `tungstenite`—we were now missing the
`Sec-WebSocket-Key` header that `tungstenite` would otherwise set for
us.
Since we were only passing a custom `http::Request` to set headers, our
approach has been adjusted to construct the initial WebSocket request
using `tungstenite`'s `IntoClientRequest::into_client_request` and then
modifying the request to set our additional desired headers.
Release Notes:
- N/A
This also refactors the BufferStore + WorktreeStore interfaces to make
them cleaner, more fully encapsulating the RPC aspects of their
functionality.
Release Notes:
- N/A
This is a ~small~ pure refactor that's a step toward SSH remoting. I've
extracted the Project's buffer state management into a smaller, separate
struct called `BufferStore`, currently in the same crate. I did this as
a separate PR to reduce conflicts between main and `remoting-over-ssh`.
The idea is to make use of this struct (and other smaller structs that
make up `Project`) in a dedicated, simpler `HeadlessProject` type that
we will use in the SSH server to model the remote end of a project. With
this approach, as we develop the headless project, we can avoid adding
more conditional logic to `Project` itself (which is already very
complex), and actually make `Project` a bit smaller by extracting out
helper objects.
Release Notes:
- N/A
Also, allow proto messages to be deserialized. This is to support
translating these messages JS types in a new server implementation based
on CloudFlare durable objects.
Release Notes:
- N/A
Move telemetry temp files from `config_dir` to `log_dir`. Fixes#7155
- On MacOS: from `~/.config/zed` to `~/Library/Logs/Zed`
- On Linux: from `~/.config/zed` to `.local/share/zed/logs` (or
`$FLATPAK_XDG_DATA_HOME/zed/logs`).
Release Notes:
- Fixed telemetry putting temporary files in config_dir
([#7155](https://github.com/zed-industries/zed/issues/7155)).
Fixes https://github.com/zed-industries/zed/issues/13073
Note that, contrary to the issue's text, we're still shipping a
statically bundled sqlite3 after this PR. We use enough new features of
sqlite, like `sqlite3_error_offset` and `STRICT`, that our minimum
version (v3.38.0) is higher than is presumably accessible on Ubuntu.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
This PR replaces the `lazy_static!` usages in the `paths` crate with
`OnceLock` from the standard library.
This allows us to drop the `lazy_static` dependency from this crate.
The paths are now exposed as accessor functions that reference a private
static value.
Release Notes:
- N/A
This PR extracts the definition of the various Zed paths out of `util`
and into a new `paths` crate.
`util` is for generic utils, while these paths are Zed-specific. For
instance, `gpui` depends on `util`, and it shouldn't have knowledge of
these paths, since they are only used by Zed.
Release Notes:
- N/A
I previously put this logic directly into `project.rs`, but it doesn't
feel good to pollute that code with telemetry logic, so I've moved it
over to `telemetry.rs`.
Release Notes:
- N/A
TODO:
- [x] Finish GPUI changes on other operating systems
This is a largely internal change to how we report data to our
diagnostics and telemetry. This PR also includes an update to our blade
backend which allows us to report errors in a more useful way when
failing to initialize blade.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
This PR is an internal refactor in preparation for remote editing. It
restructures the public interface of `Worktree`, reducing the number of
call sites that assume that a worktree is local or remote.
* The Project no longer calls `worktree.as_local_mut().unwrap()` in code
paths related to basic file operations
* Fewer code paths in the app rely on the worktree's `LocalSnapshot`
* Worktree-related RPC message handling is more fully encapsulated by
the `Worktree` type.
to do:
* [x] file manipulation operations
* [x] sending worktree updates when sharing
for later
* opening buffers
* updating open buffers upon worktree changes
Release Notes:
- N/A
This is still pretty raw, so I'd like to hold off on shipping it to all
users.
Release Notes:
- Hide the prompt library for non-staff until it is in a more complete
state.
* Start with a longer duration
* Widen the range used for randomizing the duration between retries
* Increase the maximum duration between retries
Release Notes:
- N/A
Data migration plan:
- [X] Make a duplicate table of `copilot_events`
- Name: `inline_completion_events`
- Omit `suggestion_id` column
- [X-reverted-skipping] In collab, continue to match on copilot_events,
but simply stuff their data into inline_completion_events, to forward it
to the new table
- [skipping] Once collab is deployed, ensure no events are being sent to
copilot_events, migrate `copilot_events` to new table via a transaction
- [skipping] Delete `copilot_events` table
---
- [X] Locally test that copilot events sent from old clients get put
into inline_completions_table
- [X] Locally test that copilot events and supermaven events sent from
new clients get put into inline_completions_table
---
- [X] Why are discard events being spammed?
- A:
8d4315712b/crates/editor/src/editor.rs (L2147)
This will throw off the past results for accepted / dismissed that I was
wanting to use to evaluate Supermaven quality, by comparing its rate
with copilot's rate.
I'm not super thrilled with this fix, but I think it'll do. In the
`supermaven_completions_provider`, we check if there's a `completion_id`
before sending either an accepted or discard completion event. I don't
see a similar construct in the `copilot_completions_provider` to
piggyback off of, so I begrudgingly introduced
`should_allow_event_to_send` and had it follow the same pattern that
`completion_id` does. Maybe there's a better way?
---
Adds events to supermaven suggestions. Makes "CopilotEvents" generic ->
"InlineCompletionEvents".
Release Notes:
- N/A
Adding `proxy` keyword to configure proxy while using zed. After setting
the proxy, restart Zed to acctually use the proxy.
Example setting:
```rust
"proxy" = "socks5://localhost:10808"
"proxy" = "http://127.0.0.1:10809"
```
Closes#9424, closes#9422, closes#8650, closes#5032, closes#6701,
closes#11890
Release Notes:
- Added settings to configure proxy in Zed
---------
Co-authored-by: Jason Lee <huacnlee@gmail.com>
- [x] Build out cli on linux
- [x] Add support for --dev-server-token sent by the CLI
- [x] Package cli into the .tar.gz
- [x] Link the cli to ~/.local/bin in install.sh
Release Notes:
- linux: Add cli support for managing zed
This PR adds a new development credentials provider for the purpose of
streamlining local development against production collab.
## Problem
Today if you want to run a development build of Zed against the
production collab server, you need to either:
1. Enter your keychain password every time in order to retrieve your
saved credentials
2. Re-authenticate with zed.dev every time
- This can get annoying as you need to pop out into a browser window
- I've also seen cases where if you re-auth too many times in a row
GitHub will make you confirm the authentication, as it looks suspicious
## Solution
This PR decouples the concept of the credentials provider from the
keychain, and adds a new development credentials provider to address
this specific case.
Now when running a development build of Zed and the
`ZED_DEVELOPMENT_AUTH` environment variable is set to a non-empty value,
the credentials will be saved to disk instead of the system keychain.
While this is not as secure as storing them in the system keychain,
since it is only used for development the tradeoff seems acceptable for
the resulting improvement in UX.
Release Notes:
- N/A
Notable things I've had to fix due to 1.78:
- Better detection of unused items
- New clippy lint (`assigning_clones`) that points out places where assignment operations with clone rhs could be replaced with more performant `clone_into`
Release Notes:
- N/A
Co-Authored-By: Mikayla <mikayla@zed.dev>
In a fit of ill-advisedness I called these things remote projects;
forgetting that remote project is also what we call collaboratively
shared projects.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
Release Notes:
- Added diagnostics for main-thread hangs on macOS. These are only
enabled if you've opted into diagnostics.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
This is a crate only addition of a new version of the AssistantPanel.
We'll be putting this behind a feature flag while we iron out the new
experience.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Co-authored-by: Nate Butler <nate@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Max <max@zed.dev>
Release Notes:
- Made remote projects per-user instead of per-channel. If you'd like to
be part of the remote development alpha, please email hi@zed.dev.
---------
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Co-authored-by: Bennet <bennetbo@gmx.de>
Co-authored-by: Nate Butler <1714999+iamnbutler@users.noreply.github.com>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
This PR flips the optionality of the `AutoUpdateSettingContent` to make
it a bit easier to work with.
#### Before
```rs
struct AutoUpdateSettingContent(Option<bool>);
type FileContent = AutoUpdateSettingContent;
```
#### After
```rs
struct AutoUpdateSettingContent(bool);
type FileContent = Option<AutoUpdateSettingContent>;
```
Release Notes:
- N/A
This puts the Linux platform implementation at a similar code style and
quality to the macOS platform. The largest change is that I collapsed
the `LinuxPlatform` -> `[Backend]` -> `[Backend]State` ->
`[Backend]StateInner` to just `[Backend]` and `[Backend]State`, and in
the process removed most of the `Rc`s and `RefCell`s.
TODO:
- [x] Make sure that this is on-par with the existing implementation
- [x] Review in detail, now that the large changes are done.
- [ ] Update the roadmap
Release Notes:
- N/A
This PR adds the ability for extensions to provide certain language
settings via the language `config.toml`.
These settings are then merged in with the rest of the settings when the
language is loaded from the extension.
The language settings that are available are:
- `tab_size`
- `hard_tabs`
- `soft_wrap`
Additionally, for bundled languages we moved these settings out of the
`settings/default.json` and into their respective `config.toml`s .
For languages currently provided by extensions, we are leaving the
values in the `settings/default.json` temporarily until all released
versions of Zed are able to load these settings from the extension.
---
Along the way we ended up refactoring the `Settings::load` method
slightly, introducing a new `SettingsSources` struct to better convey
where the settings are being loaded from.
This makes it easier to load settings from specific locations/sets of
locations in an explicit way.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This pull request introduces a new `InlineCompletionProvider` trait,
which enables making `Editor` copilot-agnostic and lets us push all the
copilot functionality into the `copilot_ui` module. Long-term, I would
like to merge `copilot` and `copilot_ui`, but right now `project`
depends on `copilot`, which makes this impossible.
The reason for adding this new trait is so that we can experiment with
other inline completion providers and swap them at runtime using config
settings.
Please, note also that we renamed some of the existing copilot actions
to be more agnostic (see release notes below). We still kept the old
actions bound for backwards-compatibility, but we should probably remove
them at some later version.
Also, as a drive-by, we added new methods to the `Global` trait that let
you read or mutate a global directly, e.g.:
```rs
MyGlobal::update(cx, |global, cx| {
});
```
Release Notes:
- Renamed the `copilot::Suggest` action to
`editor::ShowInlineCompletion`
- Renamed the `copilot::NextSuggestion` action to
`editor::NextInlineCompletion`
- Renamed the `copilot::PreviousSuggestion` action to
`editor::PreviousInlineCompletion`
- Renamed the `editor::AcceptPartialCopilotSuggestion` action to
`editor::AcceptPartialInlineCompletion`
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Kyle <kylek@zed.dev>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
* Store extensions versions' wasm API version in the database
* Share a common struct for extension API responses between collab and
client
* Add wasm API version and schema version to extension API responses
Release Notes:
- N/A
Co-authored-by: Marshall <marshall@zed.dev>
This PR provides some of the plumbing needed for a "remote" zed
instance.
The way this will work is:
* From zed on your laptop you'll be able to manage a set of dev servers,
each of which is identified by a token.
* You'll run `zed --dev-server-token XXXX` to boot a remotable dev
server.
* From the zed on your laptop you'll be able to open directories and
work on the projects on the remote server (exactly like collaboration
works today).
For now all this PR does is provide the ability for a zed instance to
sign in
using a "dev server token". The next steps will be:
* Adding support to the collaboration protocol to instruct a dev server
to "open" a directory and share it into a channel.
* Adding UI to manage these servers and tokens (manually for now)
Related #5347
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Antonio <antonio@zed.dev>
Resurrected this from some assistant work I did in Spring of 2023.
- [x] Resurrect streaming responses
- [x] Use streaming responses to enable AI via Zed's servers by default
(but preserve API key option for now)
- [x] Simplify protobuf
- [x] Proxy to OpenAI on zed.dev
- [x] Proxy to Gemini on zed.dev
- [x] Improve UX for switching between openAI and google models
- We current disallow cycling when setting a custom model, but we need a
better solution to keep OpenAI models available while testing the google
ones
- [x] Show remaining tokens correctly for Google models
- [x] Remove semantic index
- [x] Delete `ai` crate
- [x] Cloud front so we can ban abuse
- [x] Rate-limiting
- [x] Fix panic when using inline assistant
- [x] Double check the upgraded `AssistantSettings` are
backwards-compatible
- [x] Add hosted LLM interaction behind a `language-models` feature
flag.
Release Notes:
- We are temporarily removing the semantic index in order to redesign it
from scratch.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Max <max@zed.dev>
