Max Brunsfeld
b8aba0972d
Wait until contacts have been cleared when disconnecting
...
Also, use an mpsc for UpdateContacts messages, not a watch, since
the messages now represent changes instead of snapshots.
Co-authored-by: Nathan Sobo <nathan@zed.dev>
2022-05-09 17:23:39 -07:00
Max Brunsfeld
2a2698b8db
Remove stray printing in contacts panel
2022-05-09 16:31:30 -07:00
Max Brunsfeld
0533a0bd3c
Allow users to remove contact relationships that they initiated
2022-05-09 16:31:30 -07:00
Max Brunsfeld
054d697fb7
Remove remaining code associated with .zed.toml files
2022-05-09 16:31:30 -07:00
Max Brunsfeld
d7cba73ead
Decrement pending_contact_requests even if a request fails
2022-05-09 16:19:00 -07:00
Max Brunsfeld
2aec4ff234
Pick files directly from the Fs in simulate_host
...
Previously, the list of all existing files was maintained separately, but
it was not updated when a guest created a file.
2022-05-09 15:39:45 -07:00
Nathan Sobo
3d6db9083d
Update a user's contacts when they connect; fix test failures
...
The test failure we fixed doesn't seem directly related to the contact update. Maybe it just caused a failure to occur earlier than it would have in the sequence of seeds.
We fixed the test failure by responding to a user joining the project while holding the lock on the Store. This ensures that we don't send messages related to the project to that user until they've had a chance to setup event handlers after receiving the response.
Co-Authored-By: Max Brunsfeld <maxbrunsfeld@gmail.com>
2022-05-09 15:57:16 -06:00
Nathan Sobo
40f1427885
Show requests in contacts panel
...
Co-Authored-By: Max Brunsfeld <maxbrunsfeld@gmail.com>
2022-05-09 12:48:07 -06:00
Nathan Sobo
e3ee19b123
Wire up UI for requesting contacts and cancelling requests
...
Co-Authored-By: Max Brunsfeld <maxbrunsfeld@gmail.com>
2022-05-09 11:24:05 -06:00
Antonio Scandurra
e4f1952657
WIP
2022-05-09 17:06:21 +02:00
Antonio Scandurra
ca56b0d6d5
Forbid joining projects if users are not contacts
2022-05-09 15:51:54 +02:00
Antonio Scandurra
95d29c4a7b
Update contacts when peers join/leave and when project status changes
2022-05-09 15:08:18 +02:00
Antonio Scandurra
3319e0a613
Implement contact rejection
2022-05-09 10:02:14 +02:00
Nathan Sobo
9b1b61355a
Fully test contact request acceptance
...
* Be sure we send updates to multiple clients for the same user
* Be sure we send a full contacts update on initial connection
As part of this commit, I fixed an issue where we couldn't disconnect and reconnect in tests. The first disconnect would cause the I/O future to terminate asynchronously, which caused us to sign out even though the active connection didn't belong to that future. I added a guard to ensure that we only sign out if the I/O future is associated with the current connection.
2022-05-08 15:19:56 -06:00
Nathan Sobo
5d20338f69
Get basic test of accepting a contact request passing
2022-05-07 15:09:27 -06:00
Nathan Sobo
93dae88cac
WIP: Fix compile errors by commenting stuff out
2022-05-07 14:04:13 -06:00
Nathan Sobo
4f06dca78b
WIP: Update contacts based on deltas rather than snapshots
2022-05-06 20:50:59 -06:00
Max Brunsfeld
8a3425477f
Start work on RPC endpoints for dealing with contact requests
...
Co-authored-by: Nathan Sobo <nathan@zed.dev>
2022-05-06 15:44:47 -07:00
Max Brunsfeld
274c4c244c
Implement persistence for contacts
...
Co-authored-by: Nathan Sobo <nathan@zed.dev>
2022-05-06 13:33:23 -07:00
Antonio Scandurra
989b82d664
Refactor add_request_handler to respond via a Response struct
...
This also removes `add_sync_request_handler`.
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-06 17:01:27 +02:00
Antonio Scandurra
9555b93bca
Wait on RECEIVE_TIMEOUT in tests when testing disconnection
...
We were waiting for 3 seconds, but the timeout had changed in the meantime,
making some iterations of the tests fail.
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-06 16:47:08 +02:00
Antonio Scandurra
44f37afa95
Define data types for the new contacts model
...
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-06 16:24:44 +02:00
Antonio Scandurra
95d848fe1e
Ensure flex_float works even when re-painting without layout
...
Previously, we were mutating the remaining space stored on the layout
state, which would cause re-paints to always have a `remaining_space`
of 0 and therefore not align `flex_float` elements to the right/bottom.
2022-05-06 10:20:03 +02:00
Max Brunsfeld
8445eaab85
Fix crash when emptying atlases
...
Previously, when an atlas was emptied, we would move it into a different
vector: free_atlases. This removal could cause existing atlas ids to
refer to the wrong atlases.
2022-05-05 17:52:47 -07:00
Max Brunsfeld
4620c7a1e5
Filter existing contacts when searching in the contacts panel
2022-05-05 15:04:50 -07:00
Max Brunsfeld
ea81737a88
Allow fuzzy-search for potential contacts in the contacts panel
...
Co-authored-by: Nathan Sobo <nathan@zed.dev>
2022-05-05 14:14:44 -07:00
Max Brunsfeld
35fea43089
Adjust fuzzy search to avoid filtering based on edit distance threshold
2022-05-05 12:43:38 -07:00
Nathan Sobo
342bdfc7e0
Render a user query editor in the contacts panel
2022-05-05 10:24:21 -06:00
Nathan Sobo
6050e0ead7
Add fuzzy_search_users to Db trait, PostgresDb
2022-05-05 09:58:18 -06:00
Antonio Scandurra
76ad563b45
Fix memory leak of ProjectPanel
...
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-05 15:52:46 +02:00
Antonio Scandurra
2e9bdfbeac
Improve delete prompt in project browser
...
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-05 15:49:40 +02:00
Antonio Scandurra
6021ab12c9
Clear project browser editor even if an operation fails
...
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-05 15:43:42 +02:00
Antonio Scandurra
954fabec42
Don't hide sidebar when hitting cmd-1
...
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-05 15:34:36 +02:00
Antonio Scandurra
2e6cf2011d
When opening items via project panel, only focus them on double-click
...
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-05 15:27:27 +02:00
Antonio Scandurra
61346f734d
WIP
2022-05-05 15:15:58 +02:00
Antonio Scandurra
6b22c47d47
Introduce guest file creation in randomized collaboration test
...
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-05 14:54:35 +02:00
Antonio Scandurra
6212f2fe30
Wait for remote worktree to catch up with host before mutating entries
...
This ensures that entries don't randomly re-appear on remote worktrees
due to observing an update too late. In fact, it ensures that the remote
worktree has the same starting state of the host before preemptively applying
the fs operation locally.
2022-05-05 13:47:53 +02:00
Antonio Scandurra
ecb847a027
Fix bugs in FakeFs::{remove_dir,rename}
2022-05-05 09:02:31 +02:00
Max Brunsfeld
4b1c46fa45
Allow deleting entries from the project panel
2022-05-04 18:00:23 -07:00
Max Brunsfeld
509ede0e80
Allow guests to create directories
2022-05-04 16:52:46 -07:00
Max Brunsfeld
40e0f10195
Allow creating directories from the project panel
2022-05-04 16:47:11 -07:00
Max Brunsfeld
a2c22a5e43
Prevent eager snapshot mutations from being clobbered by background updates
...
Co-authored-by: Nathan Sobo <nathan@zed.dev>
2022-05-04 15:10:39 -07:00
Max Brunsfeld
821dff0e2d
Keep showing edited filename in project panel while edit is in-progress
2022-05-04 13:03:50 -07:00
Max Brunsfeld
ff3cf3c0c3
Bump protocol version number
2022-05-04 10:33:26 -07:00
Max Brunsfeld
438e4e7a19
Allow guests to rename stuff
...
Co-Authored-By: Antonio Scandurra <me@as-cii.com>
Co-Authored-By: Nathan Sobo <nathan@zed.dev>
2022-05-04 10:28:44 -07:00
Nathan Sobo
470d693d5e
Rename entries via the project to prepare for guest support
...
Co-Authored-By: Antonio Scandurra <me@as-cii.com>
2022-05-04 10:28:44 -07:00
Max Brunsfeld
657ea264cc
Allow guests to create files from the project panel
...
Co-authored-by: Nathan Sobo <nathan@zed.dev>
2022-05-04 10:28:44 -07:00
Max Brunsfeld
8291b8108d
Update snapshot atomically when processing FS events
2022-05-04 10:28:44 -07:00
Max Brunsfeld
0ff39f1280
Select new files in the project panel after creating them
2022-05-04 10:28:44 -07:00
Max Brunsfeld
a19766931d
Rename entry atomically in LocalWorktree::rename
2022-05-04 10:28:44 -07:00
