* I was outplayed by the C programming language
* Fix emulating empty keys as 0s
* Add exceptions for Detect Reader
* Sync api_symbols.csv for F18
* Outplayed by the C language [X2]
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: always clock SMPS from HSI
* FuriHal: add clock startup time check, ensure that we conform to core2 config value
* FuriHal: set sleep mode to legacy if clock startup time is too high
---------
Co-authored-by: hedger <hedger@users.noreply.github.com>
* added support for ISO15693 (NfcV) emulation, added support for reading SLIX tags
* SLIX: fixed crash situation when an invalid password was requested
* ISO15693: show emulate menu when opening file
* rename NfcV emulate scene to match other NfcV names
* optimize allocation size for signals
* ISO15693: further optimizations of allocation and free code
* ISO15693: reduce latency on state machine reset
* respond with block security status when option flag is set
* increased maximum memory size to match standard
added security status handling/load/save
added SELECT/QUIET handling
more fine grained allocation routines and checks
fix memset sizes
* added "Listen NfcV Reader" to sniff traffic from reader to card
* added correct description to delete menu
* also added DSFID/AFI handling and locking
* increase sniff log size
* scale NfcV frequency a bit, add echo mode, fix signal level at the end
* use symbolic modulated/unmodulated GPIO levels
* honor AFI field, decrease verbosity and removed debug code
* refactor defines for less namespace pollution by using NFCV_ prefixes
* correct an oversight that original cards return an generic error when addressing outside block range
* use inverse modulation, increasing readable range significantly
* rework and better document nfc chip initialization
* nfcv code review fixes
* Disable accidentally left on signal debug gpio output
* Improve NFCV Read/Info GUIs. Authored by @xMasterX, committed by @nvx
* Fix crash that occurs when you exit from NFCV emulation and start it again. Authored by @xMasterX, committed by @nvx
* Remove delay from emulation loop. This improves compatibility when the reader is Android.
* Lib: digital signal debug output pin info
Co-authored-by: Tiernan Messmer <tiernan.messmer@gmail.com>
Co-authored-by: MX <10697207+xMasterX@users.noreply.github.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* digital signal: add optimization
* nfc test: more restrict tests
* digital signal: build as separate library
* digital signal: remove unused flags, format sources
* digital signal: fix cflag name
* target: fix build for f18 target
Co-authored-by: あく <alleteam@gmail.com>
* fbt: added hooks for build & dist environments
* Moved env hooks to an optional file
* Fixed var name
* Added fw origin to device info
* Bumped device info version
* fbt: added FIRMWARE_ORIGIN option. Different implementation for FW_ORIGIN_* C macro.
* api: bumped versions
* fbt: added fbt_options_local.py
* gitignore: cleanup
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: add bus abstraction and port some subsystem to it
* Make PVS happy, cleanup code
* Update API symbols for f18
* F18: backport bus changes from f7
* Revert to STOP2 sleep mode
* Fix downgrading the firmware via updater
* Port iButton TIM1 to furi_hal_bus
* Port Infrared TIM1 and TIM2 to furi_hal_bus
* Just enable the timer bus
* Port furi_hal_pwm to bus API
* Fix include statement
* Port furi_hal_rfid to bus API
* Port furi_hal_subghz and others to bus API
* Remove unneeded include
* Improve furi_hal_infrared defines
* Reset LPTIM1 via furi_hal_bus API
* Crash when trying to enable an already enabled peripheral
* Better defines
* Improved checks
* Lots of macro wrappers
* Copy spi changes for f18
* Fix crashes in LFRFID system
* Fix crashes in NFC system
* Improve comments
* Create FuriHalBus.md
* Update FuriHalBus.md
* Fix crash when launching updater
* Documentation: couple small fixes in FuriHalBus
* FuriHal: fix copypaste in furi_hal_rfid_tim_reset
* FuriHal: reset radio core related peripherals on restart
* FuriHalBus: is enabled routine and bug fix for uart
* RFID HAL: accomodate furi hal bus
Co-authored-by: Georgii Surkov <georgii.surkov@outlook.com>
Co-authored-by: Georgii Surkov <37121527+gsurkov@users.noreply.github.com>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Implement support for reading Opal card (Sydney, Australia)
* stub_parser_verify_read: used UNUSED macro
* furi_hal_rtc: expose calendaring as functions
* opal: use bit-packed struct to parse, rather than manually shifting about
* Update f18 api symbols
Co-authored-by: あく <alleteam@gmail.com>
* nfc: Add Mifare Ultralight C detection
* nfc: Add display name for MFUL C and hide menu items
MFUL C unlock and emulation currently not supported, so hide from menu
if current card is MFUL C
* nfc: Also check response when probing 3DES auth
* nfc: Hide emulate option in saved menu for MFUL if not supported
* nfc: Remove unlock options from saved menu if Ultralight C
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* added DigitalSequence to chain multiple DigitalSignals
added PulseReader for hardware assisted digital signal sampling
* added send_time option to start a signal at a specific DWT->CYCCNT value
* fixed linter errors and undone function renaming
* fixed renaming
* flagged functions in api_symbols.csv
* allow gpio field to stay uninitialized in digital_signal_prepare_arr()
* fix test cases to match (expected) implementation
* pulse_reader: build as static library
Signed-off-by: g3gg0.de <git@g3gg0.de>
* fix starting level detection in pulse_reader
* added unit test for pulse_reader
* change pulse reader test timings to 1, 10 and 100 ms
* fine tuned timings for pulse_reader test
* pulse_reader_stop now deinits GPIO as recommended by @gornekich
* ran format_py
* pulse_reader: remove from API, allow to link with faps
Signed-off-by: g3gg0.de <git@g3gg0.de>
* remove unit test for pulse_reader again
* pulse_reader: add call to set GPIO pull direction
* make structures private, add C implementation of digital_signal_update_dma()
* digital_signal/pulse_reader: allow parameters for free to be NULL
* digital_signal: show unoptimized and optimized code for digital_signal_update_dma() next to each other
* pulse_reader: further optimize assembly code
* digital_signal: reduce code complexity of digital_signal_update_dma() by only reconfiguring DMA2
* digital_signal: remove assembly code, limiting the performance but increasing portability
* added recovery if the timer already expired
* digital_signal: fix memory leak
* digital_signal: keep lock until all DMA transfers have finished
* DigitalSequence: fix issues with concatenation of same levels and spurious bit flips
* DigitalSignal: use cyclic DMA buffer for sequences
* update api_symbols.csv
* Update api_symbols.csv for f18 target
* Patches from @gornekich to fix linter warnings.
* Remove some redundant if checks
* Remove some magic numbers and reformat.
* Remove forced terminating edge.
Signed-off-by: g3gg0.de <git@g3gg0.de>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: Tiernan Messmer <tiernan.messmer@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Furi: properly handle thread free before TCB scrapping, add furi_free - more invasive version of free to memmgr. FuriHal: add DWT comparator api to cortex. Updater, RPC: refactor various thread shanenigans. Code cleanup.
* Rollback free macros and related changes
* Loader: menu part
* Settings: remove unused loader api
* Desktop: get loader from record_open
* CLI: remove unneeded loader api
* gitignore: ignore .old files
* Loader: now really a service
* Loader: working service prototype
* Loader: cli, system start hooks
* CI/CD: make happy
* Loader: autorun
* Loader: lock and unlock
* Loader: rearrange code
* Gui, module menu: fix memleak
* Updater test: add timeout
* added update timeouts and max run duration
* Github: revert updater test workflow changes
* Loader: less missleading message in info cli command
Co-authored-by: doomwastaken <k.volkov@flipperdevices.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* hal: device_info: added API version to "firmware.api.major" & "firmware.api.minor"
* FuriHal: bump device info version
Co-authored-by: あく <alleteam@gmail.com>
* cubewb: downgraded to v1.15.0
* hal: updated f18 symbols to match LL
* hal: flash: use furi_hal_cortex_timer for timeouts
* scripts: fixed cube version validation from config file
* hal: flash: added 3 seconds timeout when waiting for C2 to unlock flash controller. On timeout, triggers furi_check
* nfc: fixed missing interrupt setup on multiple platformSetIrqCallback() invocations
* hal: gpio: don't trigger furi_check on furi_hal_gpio_add_int_callback() with same parameters
* Reverted NFC fixes - will be in a separate PR
* scripts: storage: fixed exception handler for paths
* Active RPC session icon
* Add RpcOwner, don't show the RPC icon when the session was started from BLE
* Fix rpc_test and f18 api
* Bump API version
Co-authored-by: あく <alleteam@gmail.com>
* Improve RNG error handling
* Sync RTC shadow registers on Stop mode exit
* Implement working STOP2 mode
* Fix formatting
* FuriHal: disable SWD pins if debug is disabled
* Power: cleanup battery info view, handle zero current report from gauge
* Fbt: add command line argument for extra global defines
* FuriHal: cleanup debug defines in power and os, drop deep_insomnia counter.
* Add a setting to disable deep sleep
* Clean up furi_hal_power
* FuriHal,FapLoader,Debug: implement debug in stop mode, workaround resume in stop
* FuriHal: document OS and power subsystems debugging
* Furi: enable debug interface on crash
---------
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Canvas with rotation
* Full icon rotation, cleanup of unused resources
* F18 API update
* Bitmap draw cleanup
* More cleaning up
* Migrate recovery and DFU to canvas
* Make the internal draw function static
* Remove all calls to u8g2_DrawXBM
Co-authored-by: あく <alleteam@gmail.com>
* Furi: more gpio checks in HAL
* Nfc: do not spawn service thread if it is already spawned
Co-authored-by: Sergey Gavrilov <who.just.the.doctor@gmail.com>
* Core, Thread: mark thread to join from prvDeleteTCB
* USB HAL: move vars to MEM2
* Core, Thread: cleanup sources
* Cli: add magic delays on rx pipe error, prevent cli from consuming processor time
* Furi: update thread documentation
Co-authored-by: あく <alleteam@gmail.com>
* Separate ibutton to its own module, add one_wire to f18
* Move onewire cli to a separate app
* Add definitions for normal and overdrive timings
* Update api definitions
* Add rough overdrive timings definition for onewire emulation
* Remove one_wire_host_timing.h
* Add rough overdrive timings for onewire host
* Improve overdrive mode
* Working overdrive mode from flipper to flipper
* Update thermometer example app
* Turn on otg power when running thermometer example app
* Implement reset overdrive switching
* Always exit out of overdrive mode
* Improve overdrive timings
* Fix typos
* Fix reset behaviour
* Use overdrive mode everywhere in DS1996
* Improve comments
* Bump API version
Co-authored-by: あく <alleteam@gmail.com>
