DarkFlippers/unleashed-firmware
1
1
Fork 0
mirror of https://github.com/DarkFlippers/unleashed-firmware.git synced 2024-12-24 22:07:14 +03:00
Code Issues Projects Releases Wiki Activity
fdde5856b8
unleashed-firmware/documentation/FuriHalDebuging.md
Sergey Gavrilov 4705812d24
SD-Card: proper HAL (#3058) 
* Storage: remove unused error from SDInfo
* FatFS: remove sd_spi_io
* HAL: sd card api
* Update: use sd hal
* FatFS: use sd hal
* Storage: use sd hal
* API: sd hal
* Fix TODO workflow
* SD Hal: Fix source buffer overflow
* fix for fix!
* HAL: cleanup sd detection api
* HAL: FURI_HAL_SD_SPI_DEBUG flag
* HAL: FuriHalSdStatus -> FuriStatus
* API: downgrade
* Change define logic
* HAL: presence
2023-09-11 18:30:56 +09:00

1.5 KiB
Raw Blame History

Furi HAL Debugging

Some Furi subsystems got additional debugging features that can be enabled by adding additional defines to firmware compilation. Usually they are used for low level tracing and profiling or signal redirection/duplication.

FuriHalOs

--extra-define=FURI_HAL_OS_DEBUG enables tick, tick suppression, idle and time flow.

There are 3 signals that will be exposed to external GPIO pins:

  • AWAKE - PA7 - High when system is busy with computations, low when sleeping. Can be used to track transitions to sleep mode.
  • TICK - PA6 - Flipped on system tick, only flips when no tick suppression in progress. Can be used to track tick skew and abnormal task scheduling.
  • SECOND - PA4 - Flipped each second. Can be used for tracing RT issue: time flow disturbance means system doesn't conforms Hard RT.

FuriHalPower

--extra-define=FURI_HAL_POWER_DEBUG enables power subsystem mode transitions tracing.

There are 2 signals that will be exposed to external GPIO pins:

  • WFI - PB2 - Light sleep (wait for interrupt) used. Basically this is lightest and most non-breaking things power save mode. All function and debug should work correctly in this mode.
  • STOP - PC3 - STOP mode used. Platform deep sleep mode. Extremely fragile mode where most of the silicon is disabled or in unusable state. Debugging MCU in this mode is nearly impossible.

FuriHalSD

--extra-define=FURI_HAL_SD_SPI_DEBUG enables SD card SPI bus logging.