mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-12-21 04:11:48 +03:00
115 lines
6.0 KiB
Markdown
115 lines
6.0 KiB
Markdown
# How to use Flipper as a new SubGHz remote (not clone of original remote)
|
||
|
||
### If your system is not added here that doesn't mean flipper don't support it! Look into add manually menu, and search for your manufacturers inscturctions!
|
||
### Also many supported systems can be used only from `Read` mode, `Add Manually` is used only to make new remotes that can be binded with receiver
|
||
|
||
## AN-Motors AT4
|
||
|
||
**This instruction for older boards, if your has no** `Learn` **button but has buttons** `F`, `CL`, `+`, `-` **read instruction from Alutech AT4N**
|
||
1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> AN-Motors AT4 433Mhz
|
||
2. Open your new remote file
|
||
3. Open your receiver box, find button `Learn` click it one time, led will turn on.
|
||
4. Press `Send` on your flipper one time, led on receiver board will turn off.
|
||
5. Press `Send` on your flipper again, led on receiver will start flashing, wait couple seconds until led turns off.
|
||
6. Done
|
||
|
||
Watch this video to learn more (video in Russian language): https://www.youtube.com/watch?v=URVMtTELcnU
|
||
|
||
## Alutech AT4N (AN-Motors)
|
||
|
||
1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> Alutech AT4N 433Mhz
|
||
2. Open your new remote file
|
||
3. Open your receiver box, find button `F` press it for ~3sec, display will show `Pr`.
|
||
4. Click `F` button couple times until you see `Lr` on screen
|
||
5. Using buttons `+` / `-` select free number that has no remotes in it (if it has remote programmed on that number, it will show a red dot on the down right corner)
|
||
6. Press `Send` on your flipper one time, display on receiver board will flash and red dot will appear next to remote number.
|
||
7. Press button `F` on receiver board for ~3sec to exit programming mode
|
||
8. Done
|
||
|
||
Watch this video to learn more and see how different boards can be programmed (video in Russian language): https://www.youtube.com/watch?v=XrOVVYhFXDg
|
||
|
||
## Aprimatic TR
|
||
|
||
1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> KL: Aprimatic 433Mhz
|
||
2. Open your new remote file
|
||
3. Push all 4 buttons at same time on your existing remote thats already works with receiver
|
||
4. Receiver makes a continuous beep
|
||
5. Press `Send` on your flipper for ~2 seconds
|
||
6. Wait until receiver stops beeping
|
||
7. Done?
|
||
|
||
## Doorhan
|
||
|
||
1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> KL: Doorhan 433Mhz or 315Mhz depends on your receiver (find out by reading your existing remote)
|
||
2. Open your new remote file
|
||
3. Push `P` button for ~2 sec, led will start flashing
|
||
4. Press `Send` on your flipper for ~2 seconds
|
||
5. Led on the receiver board will flash and turn off
|
||
6. Done!
|
||
|
||
Also you can program new remote using old remote on newer boards! See first video below:
|
||
Watch this videos to learn more (videos in Russian language): https://www.youtube.com/watch?v=wZ5121HYv50 / https://www.youtube.com/watch?v=1ucrDKF3vWc
|
||
|
||
## Somfy Telis
|
||
|
||
1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> Somfy Telis 433Mhz
|
||
2. Open your new remote file
|
||
3. Long press (hold) the ‘Prog’ button on a remote that is already registered to the device, until the blinds move shortly up and down.
|
||
4. Press and hold the ‘Prog’ button on the flipper (Left Arrow), until the blinds move shortly up and down again.
|
||
5. Done?
|
||
|
||
## BFT Mitto
|
||
|
||
1. Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> BFT Mitto 433Mhz
|
||
2. Open your new remote file
|
||
3. You need to be in minimum 3 meters to receiver
|
||
4. Original Remote: Press hidden button on back of remote with a pin or paper clip OR press Button 1 & 2 together until remote LED lights.
|
||
5. Original Remote: Momentarily press button that opens device
|
||
6. Long press (Right Arrow) - (0xF button - Btn:F) on Flipper for like 3-5 sec
|
||
7. Done?
|
||
|
||
## CAME Atomo
|
||
|
||
1. Use google to find instructions - `how to program new CAME Atomo remote into receiver`
|
||
2. Watch this video to learn more (video in Russian language): https://www.youtube.com/watch?v=XeHUwfcSS30
|
||
|
||
## Nice Flor S
|
||
|
||
- Create new remote with randomly generated serial: Go to SubGHz -> Add Manually -> Nice FloR-S 433Mhz
|
||
- Open your new remote file
|
||
|
||
### Coding using an existing remote
|
||
To enter the code of a new remote control without using your receiver, you will need
|
||
an authorised remote control (note: the first remote control must always be entered
|
||
using the receiver key). Now, with the two remote controls (your already coded
|
||
remote, and your new remote), which we shall call NEW (the one whose code we want
|
||
to enter) and OLD (the authorised one), position yourself within 3m of the gate/garage
|
||
receiver and then:
|
||
1. Press and hold the `Send` button on the flipper for at least 5 seconds and then
|
||
release.
|
||
2. Press the button on the already programmed remote 3 times slowly.
|
||
3. Press the `Send` button on the flipper slowly and then release.
|
||
|
||
### Coding directly to your receiver
|
||
Your new remote will program to your receiver as per your original remote
|
||
instructions, so please refer to your manual. But for a typical NICE FLOX2R Receiver,
|
||
the programming procedure is as follows:
|
||
1. Press the learning button on your receiver for 1-2 seconds. The LED will turn on
|
||
for 5 seconds. Within 5 seconds, complete the next step.
|
||
2. Press a `Send` button on your flipper until the LED on your receiver turns off.
|
||
3. Release the remote button and wait for 2 seconds.
|
||
4. Press the `Send` button on your flipper again. The LED on your receiver
|
||
will now flash 3 times. This indicates that your remote has been successfully
|
||
coded. If this does not happen, repeat the whole procedure from the
|
||
beginning, and try again.
|
||
5. Wait 5 seconds. Press the button on your new remote to test if it opens your
|
||
garage/gate.
|
||
|
||
|
||
#### Follow links below to find more detailed instructions!!!
|
||
|
||
#### Materials used:
|
||
- [Somfy Telis](https://pushstack.wordpress.com/somfy-rts-protocol/)
|
||
- [BFT Mitto](https://www.retroremotes.com.au/wp-content/uploads/2017/03/BFT-MITTO-2-4-19-6-17.pdf)
|
||
- [NICE FLOX2R Receiver Programming](https://apollogateopeners.com/store/pdf/apollo-flor-s-receiver-programming-guide.pdf)
|
||
- [Nice Flor S Programming](https://motepro.com.au/Instructions/Nice.pdf) |