mirror of
https://github.com/InfiniTimeOrg/InfiniTime.git
synced 2024-12-27 19:53:03 +03:00
15 lines
895 B
Markdown
15 lines
895 B
Markdown
# How to flash InfiniTime using the SWD interface
|
|
Download the files **bootloader.bin**, **image-x.y.z.bin** and **pinetime-graphics-x.y.z.bin** from the release page:
|
|
|
|
|
|
|
|
The bootloader reads a boot logo from the external SPI flash memory. The first step consists of flashing a tool in the MCU that will flash the boot logo into this SPI flash memory. This first step is optional but recommended (the bootloader will display garbage on screen for a few second if you don't do it).
|
|
Using your SWD tool, flash **pinetime-graphics-x.y.z.bin** at offset **0x0000**. Reset the MCU and wait for a few seconds until the logo is completely drawn on the display.
|
|
|
|
Then, using your SWD tool, flash these file at the following offsets:
|
|
|
|
- bootloader.bin : **0x0000**
|
|
- image-x.y.z.bin : **0x8000**
|
|
|
|
Reset and voilà, you're running InfiniTime on your PineTime!
|