By this point of time, we already have x86-64 support and have removed
i686 support too.
Since we are not the only OS project to remove 32-bit support entirely
and 64-bit computing is the norm for modern personal computers, there's
no need to explain this as it's obvious "why we are 64-bit only".
This is an implementation that tries to follow the spec as closely as
possible, and works with Qemu's Intel HDA and some bare metal HDA
controllers out there. Compiling with `INTEL_HDA_DEBUG=on` will provide
a lot of detailed information that could help us getting this to work
on more bare metal controllers as well :^)
Output format is limited to `i16` samples for now.
"image" was an alias for "qemu-image".
I want to add an `image` userland utility, which clashes with that
shortname.
So remove the existing "image" target. It was just an alias for
"qemu-image".
If you use serenity.sh to build, nothing changes. This only affects you
if you run ninja manually -- you now have to say `ninja qemu-image` to
build the disk image.
Add some prose to the introduction of Lagom about how we use it. Also,
move the section on including Lagom in other projects above the fuzzer
documentation.
Remove the explicit cmake commands from the Fuzzer documentation, as the
script should be the source of truth.
This filesystem is based on the code of the long-lived TmpFS. It differs
from that filesystem in one keypoint - its root inode doesn't have a
sticky bit on it.
Therefore, we mount it on /dev, to ensure only root can modify files on
that directory. In addition to that, /tmp is mounted directly in the
SystemServer main (start) code, so it's no longer specified in the fstab
file. We ensure that /tmp has a sticky bit and has the value 0777 for
root directory permissions, which is certainly a special case when using
RAM-backed (and in general other) filesystems.
Because of these 2 changes, it's no longer needed to maintain the TmpFS
filesystem, hence it's removed (renamed to RAMFS), because the RAMFS
represents the purpose of this filesystem in a much better way - it
relies on being backed by RAM "storage", and therefore it's easy to
conclude it's temporary and volatile, so its content is gone on either
system shutdown or unmounting of the filesystem.
Instead of explaining custom build directories first and then following
that up with a an explainer that Meta/serenity.sh is the easiest way to
get the browser up and running to try it out was not very ergonmic.
Also reorganize some of the per-distro documentation to put the compiler
requirements front and center.
`Stream` will be qualified as `AK::Stream` until we remove the
`Core::Stream` namespace. `IODevice` now reuses the `SeekMode` that is
defined by `SeekableStream`, since defining its own would require us to
qualify it with `AK::SeekMode` everywhere.
The setting of scan code set sequence is removed, as it's buggy and
could lead the controller to fail immediately when doing self-test
afterwards. We will restore it when we understand how to do so safely.
Allow the user to determine a preferred detection path with a new kernel
command line argument. The defualt option is to check i8042 presence
with an ACPI check and if necessary - an "aggressive" test to determine
i8042 existence in the system.
Also, keep the i8042 controller pointer on the stack, so don't assign
m_i8042_controller member pointer if it does not exist.
The biggest difference is that -m32 is no longer important, and in fact
breaks every 64-bit setup.
Also, defining ENABLE_UNICODE_DATA, ENABLE_COMPILETIME_FORMAT_CHECK, and
__SSE__ makes some code "visible" in the #ifdef sense, which improves
syntax highlighting.
/etc/mtab is identical to /proc/self/mounts, but it does not exist under
many circumstances, e.g. chroot'ed or in WSL. The fact that many
userspace programs rely on this file existing and the user needing to
create symlinks manually has been a long-standing issue (there's pretty
old forum posts on Debian and Arch Linux forums about it), but it's not
fixed upstream. This short mention should save people some time.
In the fresh and minimal installations dev package are often
stripped. This commit will install the libssl dev packages
required in `Utilities/cmcurl/CMakeLists.txt:608`.
This will make it easier to support both string types at the same time
while we convert code, and tracking down remaining uses.
One big exception is Value::to_string() in LibJS, where the name is
dictated by the ToString AO.
We have a new, improved string type coming up in AK (OOM aware, no null
state), and while it's going to use UTF-8, the name UTF8String is a
mouthful - so let's free up the String name by renaming the existing
class.
Making the old one have an annoying name will hopefully also help with
quick adoption :^)
Changing the naming conventions one-by-one was tedious and error-prone.
A settings file is likely to be more forward compatible than a
screenshot. The settings file was made by repeating the manual steps
provided in the documentation, and exporting the file in CLion.
The two major changes noticeable on the SerenityOS codebase are:
- Much improved support for const placement, clang-format-14 ignored
our east-const configuration in various places
- Different formatting for requires clauses, now breaking them onto
their own line, which helps with readability a bit
Current versions of CLion also ship LLVM 15, so the built-in formatting
now matches CI formatting again :^)
As Evil stated in the Discord, WSL users must install the DLL
libraries with their QEMU Installation or else they will receive
obscure errors about the syntax of the Meta/run.sh file as shown in
SerenityOS#14033.
YouCompleteMe is a plugin for Vim which provides code-completion
functionality. This change adds a configuration file which makes
YouCompleteMe aware of which compile flags to use with clangd.
So far we've gotten away with using GCC 11 for Lagom and to compile the
toolchain, but via #15795 we discovered a compiler bug that has been
fixed in the latest version but would error the build with CI's GCC 11.
Time for an upgrade :^)
We already use ubuntu-22.04 images in most places, so this is pretty
straightforward. The only exception is Idan's self-hosted runner, which
uses Ubuntu Focal. LibJS should build fine with GCC 11, still.
This code generator no longer creates JS wrappers for platform objects
in the old sense, instead they're JS objects internally themselves.
Most of what we generate now are prototypes - which can be seen as
bindings for the internal C++ methods implementing getters, setters, and
methods - as well as object constructors, i.e. bindings for the internal
create_with_global_object() method.
Also tweak the naming of various CMake glue code existing around this.
This is a monster patch that turns all EventTargets into GC-allocated
PlatformObjects. Their C++ wrapper classes are removed, and the LibJS
garbage collector is now responsible for their lifetimes.
There's a fair amount of hacks and band-aids in this patch, and we'll
have a lot of cleanup to do after this.
The FLAC "spec tests", or rather the test suite by xiph that exercises
weird FLAC features and edge cases, can be found at
https://github.com/ietf-wg-cellar/flac-test-files and is a good
challenge for our FLAC decoder to become more spec compliant. Running
these tests is similar to LibWasm spec tests, you need to pass
INCLUDE_FLAC_SPEC_TESTS to CMake.
As of integrating these tests, 23 out of 63 fail. :yakplus:
Add a variant of auto formatting using clang-format that doesn't use
additional packages. It works by adding a buffer-local hook to
`'before-save` for all C++ project files.
The current compilerArgs will cause an error when VSCode's C++ extension
queries the compiler for defaults, causing it to revert to the system's
default compiler.
The generate-manpages script needs to be updated again to handle the new
PNGs in section 1. (I'm intentionally not making this a multi-directory
glob.)
This PR includes information that highlights the importance of
updating Xcode on MacOS. I ran into problems building serenity
on MacOS because I had Xcode installed but not updated in a while.
This triggered seemingly unrelated errors that were easily solved
by updating Xcode.
Even though we tell the user to change the version manually if it
doesn't match with the current
`Toolchain/Local/i686/i686-pc-serenity/include/XX.X.X` version, it
doesn't hurt to update it properly now that versions differ by major
version.
This commit bumps the required QEMU version to 6.2 and updates the
version checking logic in Meta/run.sh to support checking against
major and minor version numbers instead of checking against the major
version only
By default we enable the Kernel Undefined Behavior Sanitizer, which
checks for undefined behavior at runtime. However, sometimes a developer
might want to turn that off, so now there is a easy way to do that.
The qemu-emulators-full package installs qemu backends for *all*
supported architectures, but we only need x86 and AArch64.
This decreases the installed size of dependencies by 800 MiB.
- Delete the part about removing `[Exposed=Window]` since that's not
necessary and we may want that information there to generate the
Window object.
- Mention adding `#import`s.
- Outline the requirements for the implementation class.
- Mention the non-Event wrapper factories that need to know about
certain types.
I tend to refer to this document every time I add an IDL type so it's
helpful if it's comprehensive.
This option sets -fprofile-instr-generate -fcoverage-mapping for Clang
builds only on almost all of Userland. Loader and LibTimeZone are
exempt. This can be used for generating code coverage reports, or even
PGO in the future.
Now that clang-format-14 ubuntu packages are available, it's time to
finally upgrade our clang-format version. This version brings with it
a bunch of useful features with const-placement being the most notable.
These will be enabled in the following commits.
Moves the nix script to setup the build environment from Documentation
into the Toolchain as a callable script. I also modified the script
to accept a "pkgs" argument to make it easy to override the nixpkgs
version from the command-line when calling the script.
This document is meant to cover every significant step in the journey
from giving a page URL to LibWeb, and pixels showing up on screen.
It's by no means complete, but I wrote a fair chunk already, so I'll
commit at this stage and we can expand on it in-tree.
This should prevent a build issue caused by a potential
conflicting zstd installation on M1 Mac.
This was manifested in a linker error when building
the GNU toolchain:
```
Undefined symbols for architecture arm64:
[gcc/build] "_ZSTD_compress", referenced from:
```
This commit adds support for building the SerenityOS userland with the
new [mold linker].
This is not enabled by default yet; to link using mold, run the
`Toolchain/BuildMold.sh` script to build the latest release of mold, and
set the `ENABLE_MOLD_LINKER` CMake variable to ON. This option relies on
toolchain support that has been added just recently, so you might need
to rebuild your toolchain for mold to work.
[mold linker]: https://github.com/rui314/mold
It's not at all obvious how we need three different array-like types.
This change to the Patterns documentation attempts to explain why they
exist, how they differ (mostly in allocation behavior) and what their
use cases are. This builds on #11844 which fixates and tests the
hereby-described allocation behavior of FixedArray.
Some archive tools can open ext2 images like an archive, which is very
convenient for people that already have such tools like 7zip.
This also contains information for WSL users on where to find the
_disk_image in Explorer.
Remove note about CMake Tools as version 1.9.0 has shipped and no longer
needed. Update details for files to latest versions and allow easier
copy and paste into an empty file.
We used to build with -Os in order to fit within a certain size, but
there isn't really a good reason for that kind of restriction.
Switching to -O2 yields a significant improvement in throughput,
for example `test-js` is roughly 20% faster on my machine. :^)
As of qemu 6.0.0, it should already have the entitlement to access the
Hypervior.framework by default, so re-codesigning the binary is
no-longer necessary.
8a74ce618b
I intentionally don't document the format specifics, to prevent this
file from becoming outdated. Hence, only a list with pointers to where
to find details.
Apparently, qemu-system-* changed its name.
On Debian/Ubuntu, genext2fs does not make a difference: The only user of
this command, Meta/build-image-qemu.sh, runs as root anyway, and tries
to do 'mount _disk_image mnt/' first. Debian/Ubuntu always have drivers
for ext2 available, so this command has no good reason to fail, and
trying to use genext2fs might only obscure any problems that mount
encountered.
Finally, Debian Bullseye (released 2021-08-14) contains gcc-10, so the
instructions on how to upgrade are now obsolete.
'bootmode' now only controls which set of services are started by
SystemServer, so it is more appropriate to rename it to system_mode, and
no longer validate it in the Kernel.
Bootmode used to control framebuffers, panic behavior, and SystemServer.
This patch factors framebuffer control into a separate flag.
Note that the combination 'bootmode=self-test fbdev=on' leads to
unexpected behavior, which can only be fixed in a later commit.
After setting up the toochain on manjaro linux (new install) the build
of the toolchain failed as unzip was not found. The unzip package is
listed in the documentation for debian (apt) but is was missing for arch
linux.
This was straight up the wrong CMake variable to set. We care about
where the project will find Lagom, not where it wants to install its own
binaries to.
Extra configure options may need passed to CLion in order for it not to
choke on the new CMake setup. In particular, it's now a very bad idea to
pass CMAKE_CXX_COMPILER and CMAKE_C_COMPILER to the target build.
People seem to easily miss the "Setting up build tools" section, so I
have moved that step above the filesystem information and linked
directly to BuildInstructions.md to hopefully make it harder to skip.
Also, added mention of `\\wsl$` since that regularly comes up in
Discord.
I was building serenity on quite a fresh NixOS system and it turns
out `unzip` and `qemu` were missing from this nix expression to
compile and run serenity.
The default template argument is only used in one place, and it
looks like it was probably just an oversight. The rest of the Kernel
code all uses u8 as the type. So lets make that the default and remove
the unused template argument, as there doesn't seem to be a reason to
allow the size to be customizable.
This is a combination of the efforts of multiple people and hours of
pain trying to configure VSCode properly. This should give a good
baseline for anyone trying to develop Serenity with VSCode.
Co-authored-by: Hendiadyoin1 <leon2002.la@gmail.com>
Serenity build tooling autodetects gcc 10 so update-alternatives
is not necessary. Also, switching apt repositories on the fly can
cause issues with dependencies, package downgrades and leave the
system in a broken state.
After discussing on Discord about how to speed up the build time, I
received lots of helpful advice on measuring the build time, but none of
it was easily accessible. I thought other people might find it useful,
so I've written it down! :^)
Thanks goes to @bgianfo and @nico.
GCC and Clang allow us to inject a call to a function named
__sanitizer_cov_trace_pc on every edge. This function has to be defined
by us. By noting down the caller in that function we can trace the code
we have encountered during execution. Such information is used by
coverage guided fuzzers like AFL and LibFuzzer to determine if a new
input resulted in a new code path. This makes fuzzing much more
effective.
Additionally this adds a basic KCOV implementation. KCOV is an API that
allows user space to request the kernel to start collecting coverage
information for a given user space thread. Furthermore KCOV then exposes
the collected program counters to user space via a BlockDevice which can
be mmaped from user space.
This work is required to add effective support for fuzzing SerenityOS to
the Syzkaller syscall fuzzer. :^) :^)
This removes the '$' character so that it is easier to copy commands
directly from the build instructions and then executing them without
first having to remove the '$' character.
The WASM spec tests caused a stack overflow when generated with wat2wasm
version 1.0.23, which ships with homebrew. To give feature parity,
manually download the same version from GitHub packages for Ubuntu.
Document the dependencies of the WASM spec tests option, as well.
This is no longer relevant for most users because due to an
unrelated change to Meta/run.sh the default display backend is now
SDL which does not exhibit this problem.
The x86_64 QEMU binary supports both i386 as well as x86_64 guests.
By using the x86_64 binary users won't have to change anything when
switching between i386 and x86_64 builds.
People are commonly asking about a package manager in
serenity. This patch adds an answer the FAQ, explaining
why there is no need for packages as well as different
possible ways to add or remove software installed on the
system.
