This fixes an issue where images with padding and/or border did not have
their size adjusted for `border-box`, thereby becoming larger than
intended by the author.
I was not aware of this framework back when implementing this back in
bc54560e59. Add in some basic tests for
this now that we are compliant with the specification.
If a box has a negative margin-left, it may have a negative effective
offset within its parent BFC root coordinate system.
We can account for this when calculating the amount of left-side float
intrusion by flooring the X offset at 0.
Now that we have a way to resolve calc() lengths without a layout node,
we can finally support calc() values in font-size.
This wasn't possible before because font-related properties have to be
resolved eagerly in StyleComputer due to font-relative CSS length units
depending on the computed font being known.
Use contains_percentage() that works for calc() values instead of
is_percentage().
This fixes issue when tracks with calc() that has percentages where
considered as "fixed" tracks with resolvable size which led to
incorrectly resolved infinite final track sizes.
This reintroduces bounds-checking for the CSS `<angle>`, `<frequency>`,
`<integer>`, `<length>`, `<number>`, `<percentage>`, `<resolution>`,
and `<time>` types.
I regressed this around 6b8f484114 when
changing how we parsed StyleValues.
This is an improvement from before though, since we now allow the bounds
of a dimension type to have units.
Added a test to make sure we don't regress this again. :^)
If a flex item's main size is a CSS calc() value that resolves to a
length and contains a percentage, we can only resolve it when we have
the corresponding reference size for the containing block.
Previously, we would always respect the `text-align` property, even if
the text being aligned was too long for its line box and would be
clipped. This led to seeing the clipped middle/end of strings when we
should instead always see the beginning of the text.
This is a hack to emulate the behavior of other engines that use
fixed-point math. By rounding to 3 decimals, we retain a fair amount of
detail, while still allowing overshooting 100% without breaking lines.
This is both gross and slow, but it fixes real sites. Notably, the
popular Bootstrap library uses overshooting percentages in their
12-column grid system.
This hack can be removed when CSSPixels is made a fixed-point type.
If the flex container is being sized under a max-content main size
constraint, there is effectively infinite space available for flex
items. Thus, flex lines should be allowed to be infinitely long.
This is a little awkward, because the spec doesn't mention specifics
about how to resolve flexible lengths during intrninsic sizing.
I've marked the spec deviations with big "AD-HOC" comments.
Instead of just measuring the layout viewport, we now measure overflow
in every box that is a scroll container.
This has the side effect of no longer creating paintables for layout
boxes that didn't participate in layout. (For example, empty/anonymous
boxes that were ignored by flex itemization.)
Such boxes are now marked as "(not painted)" in the layout tree dumps,
as they have no paintable to dump geometry from.
This is not a beautiful program, but it does allow you to regenerate
the baseline expectation for a given layout or text test with a single
command. :^)
Previously this was compiled to require an object despite the IDL file
specifying 'optional'.
This commit makes IDLGenerator respect this modifier, and fixes the only
affected instance.
Separating the paths for replaced and non-replaced floating boxes lost
the logic for margin, padding and border which was done by
compute_width_for_floating_box. Set them the same way as we do for
block-level replaced elements, per the specification.
Since there are no table-specific boxes anymore it would be nice to
output their types additionally in layout dump so we can tell table
boxes from "regular" boxes.
Solves conflict in layout tree "type system" when elements <label> (or
<button>) can't have `display: table` because Box can't be
Layout::Label (or Layout::ButtonBox) and Layout::TableBox at the same
time.
From spec https://drafts.csswg.org/css-grid/#grid-items:
"Each in-flow child of a grid container becomes a grid item, and each
child text sequence is wrapped in an anonymous block container grid
item."
Fixes the problem that text sequences inside grid containers are
ignored and not displayed.
Fixes the bug that currently we always consider tracks with percentage
size as ones with "fixed" length even when available size is not
definite. With this change tracks with percentage size when available
size is not definite will be considered as "intrinsic" sized.
We were not taking reverse flex directions into account when choosing
the initial offset for flex item placement if justify-content were
either space-around or space-between.
Although we translate e.g `block` to `block flow` for internal use in
the engine, CSS-DISPLAY-3 tells us to use the short form in
serializations for compatibility reasons.
This adds 9 points to our score on https://html5test.com/ :^)
This allows us to create "text tests" in addition to "layout tests".
Text tests work the same as layout tests, but dump the document content
as text and exit upon receiving the window "load" event.
Introduces incomplete parsing of grid shorthand property. Only
<grid-template> part of syntax is supported for now but it is enough
to significantly improve rendering of websites that use this shorthand
to define grid :)
The path for floating, replaced elements must not fall through to the
path taken for floating, non-replaced elements. The former works like
inline replaced elements, while the latter uses a completely different
algorithm which doesn't account for intrinsic ratio. Falling through
overrides the correct value computed by the former.
Fixes#19061.
This fixes the issue when margin collapsing state was always reset if
a box has clear property not equal to none even if it does not actually
introduce clearance.
This was crashing on google.com with the linux chrome user agent,
interestingly it seems like this behavior may have been accidental as
only two of the three `parse_number()` were changed in f7dbcb6
Ignore anonymous block boxes when resolving percentage weights that
would refer to them, per the CSS 2 visual formatting model
specification. This fixes the case when we create an anonymous block
between an image which uses a percentage height relative to a parent
which specifies a definite height.
Fixes#19052.
We now create a flex container inside the input element's UA shadow tree
and add the placeholder and non-placeholder text as flex items (wrapped
in elements whose style we can manipulate).
This fixes the visual glitch where the placeholder would appear below
the bounding box of the input element. It also allows us to align the
text vertically inside the input element (like we're supposed to).
In order to achieve this, I had to make two small architectural changes
to layout tree building:
- Elements can now report that they represent a given pseudo element.
This allows us to instantiate the ::placeholder pseudo element as an
actual DOM element inside the input element's UA shadow tree.
- We no longer create a separate layout node for the shadow root itself.
Instead, children of the shadow root are treated as if they were
children of the DOM element itself for the purpose of layout tree
building.
This fixes the issue where max margin is used to find offset of
floating box although horizonal margins do not collapse so they need
to be summed instead.
This fixes a plethora of rounding problems on many websites.
In the future, we may want to replace this with fixed-point arithmetic
(bug #18566) for performance (and consistency with other engines),
but in the meantime this makes the web look a bit better. :^)
There's a lot more things that could be converted to doubles, which
would reduce the amount of casting necessary in this patch.
We can do that incrementally, however.
SVG presentation attributes are parsed as CSS values, so we also need to
handle CSS variable expansion when handling them.
This (roughly) matches the behavior of other engines. It's also used on
the web, for example on https://stripe.com/ :^)
This fixes a crash in box_baseline, due to cells created for
display: table expecting a box child and getting the inline node wrapper
instead.
Fixes#18972.
Implements more parts of sizing algorithm for tracks with spanning
items to archive parity with implementation for sizing of tracks
with non-spanning items.
There are a couple of things that went into this:
- We now calculate the intrinsic width/height and aspect ratio of <svg>
elements based on the spec algorithm instead of our previous ad-hoc
guesswork solution.
- Replaced elements with automatic size and intrinsic aspect ratio but
no intrinsic dimensions are now sized with the stretch-fit width
formula.
- We take care to assign both used width and used height to <svg>
elements before running their SVG formatting contexts. This ensures
that the inside SVG content is laid out with knowledge of its
viewport geometry.
- We avoid infinite recursion in tentative_height_for_replaced_element()
by using the already-calculated used width instead of calling the
function that calculates the used width (since that may call us right
back again).
In order to fix this, I also had to reorganize the code so that we
create an independent formatting context even for block-level boxes
that don't have any children. This accidentally improves a table
layout test as well (for empty tables).
Adds support for grid items with fixed size paddings. Supporting
percentage paddings will probably require to do second pass of tracks
layout: second pass is needed to recalculate tracks sizes when final
items sizes are known when percentage paddings are already resolved.
This change addresses the incorrect assumption that the available width
inside a grid item is equal to the width of the track it belongs to.
For instance, if a grid item has a width of 200px, the available width
inside that item is also 200px regardless of its column(s) base size.
To solve this issue, it was necessary to move the final resolution of
grid items to occur immediately after the final column track sizes are
determined. By doing so, it becomes possible to obtain correct
available width inside grid items while resolving the row track sizes.
The resolved property sets are stored with the element in a
per-pseudo-element array (same as for pseudo element layout nodes).
Longer term, we should stop storing this with elements entirely and make
it temporary state in StyleComputer somehow, so we don't waste memory
keeping all the resolved properties around.
This makes various gradients show up on https://shopify.com/ :^)
This change makes grid items be responsible for their borders instead
of grid tracks which can not have borders itself.
There are changes in layout tests but those are improvements :)
1. Propagate calc() values from StyleProperties to ComputedValues.
2. Actually resolve calc() values when determining the used flex basis.
This makes the "support" section on https://shopify.com/ show up
correctly as a 2x2 grid (instead of 1x4). :^)
While inline content between floating elements was broken correctly,
text justification was still using the original amount of available
space (without accounting for floats) when justifying fragments.
This code now works in terms of *intrusion* by left and right side
floats into a given box whose insides we're trying to layout.
Previously, it worked in terms of space occupied by floats in the root
box of the BFC they participated in. That created a bunch of edge cases
since the code asking about the information wasn't operating in root
coordinate space, but in the coordinate space of some arbitrarily nested
block descendant of the root.
This finally allows horizontal margins in the containing block chain to
affect floats and nested content correctly, and it also allows us to
remove a bogus workaround in InlineFormattingContext.
item_incurred_increase should be reset before every next distirbution
because otherwise it will accumulate increases from previous
distributions which is not supposed to happen.
Note that this simple form of text-indent only affects the first line
of formatted content in each block.
Percentages are resolved against the width of the block.
When a width/height constraint is applied to GFC it should set its own
width/height to the sum of track sizes according to the spec.
Changes in layout tests are improvement over what we had before.
Previously, the width and height of grid items were set to match the
size of the grid area they belonged to. With this change, if a grid
item has preferred width or height specified to not "auto" value it
will be resolved using grid area as containing block and used instead.
While it's possible to getComputedStyle() on an unconnected element,
the resulting object is not supposed to have any values, since we can't
resolve style without a document root anyway.
This fixes a crash on https://bandcamp.com
If there are min or max size constraints in the cross axis for a flex
item that has a desired aspect ratio, we may need to adjust the main
size *after* applying the cross size constraints.
All the steps to achieving this aren't mentioned in the spec, but it
seems that all other browsers behave this way, so we should too.
Instead of bailing after resolving one violated constraint, we have to
continue down the list of remaining constraints.
We now also call the constraint solver for all replaced elements with
"auto" for both width and height.
Co-authored-by: 0GreenClover0 <clovers02123@gmail.com>
1. Stop using -1 to indicate infinity value of growth limit. Just use
INFINITY for that.
2. More complete implementation of "Expand Flexible Tracks" step.
3. Return AvailableSize from get_free_space: spec says that this
function can return indefinite size and it is ok.
The file gap.html, which previously had multiple grid tests, has now
been divided into smaller files, each containing only one grid test.
It is going to make it easier to identify what inputs have been
affected by changes in layout code.
The file template-areas.html, which previously had multiple grid tests,
has now been divided into smaller files, each containing only one grid
test. It is going to make it easier to identify what inputs have been
affected by changes in layout code.
Also this change removes parts of template-areas.html that we can't
layout correctly yet.
If the parent BFC can come up with a nice stretch-fit width for the flex
container, it will have already done so *before* even entering flex
layout. There's no need to do it again, midway through the flex layout
algorithm.
This wasn't just unnecessary, but we were also doing it incorrectly and
not taking margins into account when calculating the amount of available
space for stretch-fit. This led to oversized flex containers in the
presence of negative margins.
Fixes#18614
Width of table wrapper need to be set to to calculate width of table
box inside. Otherwise TFC will set wrong width assuming width of
containing block is 0.
Although the algorithm for sizing tracks (rows or columns) is defined
once for both dimensions in the specification
(https://www.w3.org/TR/css-grid-2/#algo-track-sizing), we have
implemented it twice separately for sizing rows and columns.
In addition to code duplication, another issue is that these
implementations of the same algorithm have already diverged in some
places, and this divergence is likely to become even worse as our
implementation evolves.
This change unifies code for both dimension into one method that runs
track sizing.
While this change brings a bit of collateral damange (border.html and
minmax.html got changes in layout snaphots) it ultimately brings more
benefits because now we can evolve layout for both rows and colums
without duplicating the code :)
`Length::resolved(Node&)` transforms infinite values to "auto".
Following transformations:
Infinite (Length) -> "auto" -> 0 (px)
cause border-box width to be resolved in zero when it should be inf px.
Removing `Length::resolved(Node&)` makes it work right:
Infinite (Length) -> Infinite (px)
Fixes#18649
https://www.w3.org/TR/CSS22/visuren.html#floats says that when a box
establishes BFC it should not overlap with floats. The way to avoid
overlaps is up to implementor. This change implements avoiding overlap
by narrowing width of a box because it seems like what other engines
do (in the scenarios I tested).
When there are floats present inside an IFC, we must coordinate with
the parent BFC to calculate the automatic width of the IFC's block box.
This is because the IFC is not directly aware of floats. Only the BFC
knows enough about them to account for them in automatic sizing.
In particular, we now blockify layout internal boxes (e.g table parts)
by turning them into `block flow`. This fixes a crash when viewing
our GitHub repo :^)
This patch does three things:
- Factors out the code that determines whether a box will create a new
formatting context for its children (and which type of context)
- Uses that code to mark all formatting context roots in layout tree
dumps. This makes it much easier to follow along with layout since
you can now see exactly where control is transferred to a new
formatting context.
- Rebaselines all existing layout tests, since the output format has
changed slightly.
Fixes the problem that width is incorrectly computed in intrinsic
sizing mode when there are blocks that have min-width or max-width
specified.
Actually that is just the fix of a symptom of the larger problem that
Length::to_px() returns 0 when value is auto regardless of available
size.
This fix resolves issue where calculating the min size of a block could
result in incorrect value if width of the block's children was
compensated by margins to fit into container width (which is equal to 0
during min size calculation).
When we determine that a size is definite because it can be resolved now
without performing layout, we also need to account for the box-sizing
property.
This lets us remove a hack from flex layout where box-sizing:border-box
was manually undone at one point in the layout algorithm.
This commit implements following missing steps in table layout:
- Calculate final table height
- Resolve percentage height of cells and rows using final table height
- Distribute avilable height to table rows
If total max columns width (grid_max) is zero then available width
should be divided equally between columns. Previously there was
division by zero: `column.max_width / grid_max`.
Previously, the minimum height of a table row was calculated based
on the automatic height of the cells inner layout. This change makes
computed height of a cell boxes also be considered if it has definite
value.
When deciding on a box type transformation (blockify/inlinify) for a
pseudo element, we have to use the originating element as a reference
rather than the parent.
(The originating element *is* the parent for its pseudo elements.)
If there is a remaining margin-bottom in margin collapsing state
tracker after laying out all boxes in the current BFC, it must be
assigned to the last in-flow child since margin collapsing cannot
occur across a formatting context boundary.
The current issue where margin-bottom may be counted twice due to
"collapse through" margins in the last in-flow child box is addressed
with this fix by excluding such boxes during the search for a box to
assign the remaining margin.
Test case coming with this fix has a layout bug with incorrectly
computed line height.
This fixes a bug that was seen when a combination of the grid having
been floated with `float: left` and a `minmax()` column size were used.
The issue was that a grid track size should be considered intrinsically
sized if both the min and max sizes are intrinsic, not just one of them.
This is a tiny bit messy because:
- The spec says we should expand this to `flex: <flex-grow> 1 0`
- All major engines expand it to `flex: <flex-grow> 1 0%`
Spec bug: https://github.com/w3c/csswg-drafts/issues/5742
This is far from perfect, but let's at least make an attempt at laying
out <svg> when encountering it inside another <svg>.
This makes https://awesomekling.substack.com actually load and render
instead of asserting. :^)
Although the spec doesn't mention it, if a flex item has box-sizing:
border-box, and the specified size suggestion is a definite size, we
have to subtract the borders and padding from the size before using it.
This fixes an issue seen in "This Week in Ladybird #4" where the
screenshots ended up in one long vertical stack instead of paired up
2 by 2.
Per SVG2, any coordinate pairs following a moveto command should be
treated as implicit lineto commands with the same absoluteness as the
moveto command.
This attribute is used to define how the viewBox should be scaled.
Previously the behaviour implemented was that of "xMidYMid meet", now
all of them work (expect none :P).
With this the Discord login backend is now correctly scaled/positioned.
This also brings our SVG code a little closer to the spec! With spec
comments and all :^)
(Minor non-visible update to layout tests)
When sizing a flex container with flex-direction:column under a
max-content height constraint, we were incorrectly truncating the
infinite available height to 0 when collecting flex items into lines.
This caused us to put every flex item in its own flex line, which is the
complete opposite of what we want during max-content intrinsic sizing,
as the layout would grow wide but not tall.
This isn't actually part of CSS-FLEXBOX-1, but all major engines honor
these properties in flex layout, and it's widely used on the web.
There's a bug open against the flexbox spec where fantasai says the
algorithm will be updated in CSS-FLEXBOX-2:
https://github.com/w3c/csswg-drafts/issues/2336
I've added comments to all the places where we adjust calculations for
gaps with "CSS-FLEXBOX-2" so we can find them easily. When that spec
becomes available, we can add proper spec links.
VALUES-4 defines the internal representation of `calc()` as a tree of
calculation nodes. ( https://www.w3.org/TR/css-values-4/#calc-internal )
VALUES-3 lacked any definition here, so we had our own ad-hoc
implementation based around the spec grammar. This commit replaces that
with CalculationNodes representing each possible node in the tree.
There are no intended functional changes, though we do now support
nested calc() which previously did not work. For example:
`width: calc( 42 * calc(3 + 7) );`
I have added an example of this to our test page.
A couple of the layout tests that used `calc()` now return values that
are 0.5px different from before. There's no visual difference, so I
have updated the tests to use the new results.
Now that these are kind of working, lets add a layout test to prevent
future regressions :^)
This test is the same as the previous example (it is copied, though
that seems to have been done for other tests, e.g. Acid 1).
Grid and flex containers have their own rules for abspos items, so we
shouldn't try to be clever and put them in the "current" anonymous
wrapper block. That behavior is primarily for the benefit of block &
inline layout.
When calculating the intrinsic width of a block-level box, we now ignore
the preferred width entirely, and not just when the preferred width
should be treated as auto.
The condition for this was both confused and wrong, as it looked at the
available width around the box, but didn't check for a width constraint
on the box itself.
Just because the available width has an intrinsic sizing constraint
doesn't mean that the box is undergoing intrinsic sizing. It could also
be the box's containing block!
Due to CSSImportRule::has_import_result() being backwards, we never
actually entered imported style sheets when traversing style rules or
media queries.
With this fixed, we no longer need the "collect style sheets" step in
StyleComputer, as normal for_each_effective_style_rule() will now
actually find all the rules. :^)
In situations where we need a width to calculate the intrinsic height of
a flex item, we use the fit-content width as a stand-in. However, we
also need to clamp it to any min-width and max-width properties present.
In `flex-direction: column` layouts, a flex item's intrinsic height may
depend on its width, but the width is calculated *after* the intrinsic
height is required.
Unfortunately, the specification doesn't tell us exactly what to do here
(missing inputs to intrinsic sizing is a common problem) so we take the
solution that flexbox applies in 9.2.3.C and apply it to all intrinsic
height calculations within FlexFormattingContext: if the used width of
an item is not yet known when its intrinsic height is requested, we
substitute the fit-content width instead.
Note that while this is technically ad-hoc, it's basically extrapolating
the spec's suggestion in one specific case and using it in all cases.
If the previous sibling of an out-of-flow box has been wrapped in an
anonymous block, we now stuff the out-of-flow box into the anonymous
block as well.
Co-authored-by: Aliaksandr Kalenik <kalenik.aliaksandr@gmail.com>
This builds on the existing ad-hoc ResourceLoader code for HTTP fetches
which works for files as well.
This also includes a test that checks that stylesheets loaded with the
"file" URL scheme actually work.
This would previously assert in InlineFormattingContext because we had
an outwardly inline box that wasn't inwardly flow.
Fix this by converting text-based input boxes to inline-blocks. This is
an ad-hoc solution, and there might be a much better way to solve it.
Before this change `apply_clip_overflow_rect` might crash trying to
access `clip_rect` that does not have value because we currently
support calculation of visible rectangle when `overflow: hidden`
is applied for both axis.
This fixes an issue where e.g `height: 100%` on a flex item whose
container has indefinite height was being resolved to 0. It now
correctly behaves the same as auto.
Previously, when having inline contexts consisting of just a `<br/>`
tag, we would not create a line box.
Ensure that there is always a line box when a line is explicitly being
broken and also ensure it won't be trimmed due to being empty.
This will a fix a number of sites that use `<br>` tags for layouts
between block elements (even though the spec says they shouldn't).
The image made the test flaky when running on my machine, so this
doesn't seem safe at the moment. We can just hardcode the dimensions.
Eventually we should make it possible to use external images in tests,
but for now let's not flake up the CI.
According to CSS Inline Layout Module Level 3 § 2.2 Step 1. atomic
inlines should be layed out in a line box based on their margin box.
However, up until this patch we were unconditionally considering only
the border box during line box height calculation. This made us
essentially drop all vertical margins for atomic inlines.
Similar to POSIX read, the basic read and write functions of AK::Stream
do not have a lower limit of how much data they read or write (apart
from "none at all").
Rename the functions to "read some [data]" and "write some [data]" (with
"data" being omitted, since everything here is reading and writing data)
to make them sufficiently distinct from the functions that ensure to
use the entire buffer (which should be the go-to function for most
usages).
No functional changes, just a lot of new FIXMEs.
Percentage line-height values are relative to 1em (i.e the font-size
of the element). We have to resolve their computed values before
proceeding with inheritance.
If normal flow layout has caused us to progress past the current
innermost float in the block axis, we still need to consider the floats
stacked outside of it.
Fix this by always walking the currently stacked floats from innermost
to outermost when placing new floats.
When using the flex shrink factor, the flexible length resolution
algorithm was incorrectly ignoring the `frozen` flag on items and would
update the same items again, causing overconsumption of the remaining
free space on the flex line.
In case flex items had `margin: auto` on the primary flex axis, we were
still also distributing remaining space according to `justify-content`
rules. This lead to duplicated spacing in various places and overflows.
It looks like this issue was observed previously but missidentified
because there was logic to ignore margins at the start and end which
would partially paper over the root cause. However this created other
bugs (like for example not having a margin at beginning and end ;-)) and
I can find nothing in the spec or other browser behaviour that indicates
that this is something that should be done.
Now we skip justify-content space distribution alltogether if it has
already been distributed to auto margins.
The draft CSS-FLEXBOX-1 spec had a more detailed description of this
algorithm, so let's use that as our basis for the implementation.
Test by Aliaksandr. :^)
When resolving these constraints to CSS pixel sizes, we have to resolve
padding-top and padding-bottom against the flex container's *width*,
not its height.
The padding-top and padding-bottom properties are relative to the
*width* of the containing block, not the height.
It's funny how we keep making this same mistake again and again. :^)
The name "initial containing block" was wrong for this, as it doesn't
correspond to the HTML element, and that's specifically what it's
supposed to do! :^)
If a box has clearance and margin bottom of preceding box is greater
than static y of the box then it should also affect y offset in current
block container so subsequent boxes will get correct y position too.
Though table wrappers are anonymous block containers (because
TableWrapper is inherited from BlockContainer) with no lines they
should not be skipped in block auto height calculation.
The current config on GitHub Actions does not use ccache, so it takes
quite a while to build. Instead, let's just run these tests on Azure
where we already build Ladybird and have ccache enabled. This also lets
us sanitize LibWeb on both Linux and macOS.
The script changes here are to A) handle differences between Azure and
GitHub Actions and B) to support running on macOS.
This will make it easier to support both string types at the same time
while we convert code, and tracking down remaining uses.
One big exception is Value::to_string() in LibJS, where the name is
dictated by the ToString AO.
We have a new, improved string type coming up in AK (OOM aware, no null
state), and while it's going to use UTF-8, the name UTF8String is a
mouthful - so let's free up the String name by renaming the existing
class.
Making the old one have an annoying name will hopefully also help with
quick adoption :^)
Each of these strings would previously rely on StringView's char const*
constructor overload, which would call __builtin_strlen on the string.
Since we now have operator ""sv, we can replace these with much simpler
versions. This opens the door to being able to remove
StringView(char const*).
No functional changes.
This necessitated making HTMLParser ref-counted, and having it register
itself with Document when created. That makes it possible for scripts to
add new input at the current parser insertion point.
There is now a reference cycle between Document and HTMLParser. This
cycle is explicitly broken by calling Document::detach_parser() at the
end of HTMLParser::run().
This is a huge progression on ACID3, from 31% to 49%! :^)
Also, update the expected hash in the LibWeb TestHTMLTokenizer
regression test.
This is due to the "This comment has a few too many dashes." comment
token being updated.
Commit b193351a99 caused the HTML comments to flash when changing
the text cursor. Also, when double-clicking on a comment, the selection
started from the beginning of the file instead.
The following message was displaying when `TOKENIZER_TRACE_DEBUG`
was enabled:
(Tokenizer::nth_last_position) Invalid position requested: 4th-last
of 4. Returning (0-0).
Changing the `nth_last_position` to 3 fixes this. I'm guessing that's
because the parser is at that moment on the second hyphen of the `<!--`
string, so it has to go back only by three characters.
The environment settings object is effectively the context a piece of
script is running under, for example, it contains the origin,
responsible document, realm, global object and event loop for the
current context. This effectively replaces ScriptExecutionContext, but
it cannot be removed in this commit as EventTarget still depends on it.
https://html.spec.whatwg.org/multipage/webappapis.html#environment-settings-object
This commit removes all exception related code:
Remove VM::exception(), VM::throw_exception() etc. Any leftover
throw_exception calls are moved to throw_completion.
The one method left is clear_exception() which is now a no-op. Most of
these calls are just to clear whatever exception might have been thrown
when handling a Completion. So to have a cleaner commit this will be
removed in a next commit.
It also removes the actual Exception and TemporaryClearException classes
since these are no longer used.
In any spot where the exception was actually used an attempt was made to
preserve that behavior. However since it is no longer tracked by the VM
we cannot access exceptions which were thrown in previous calls.
There are two such cases which might have different behavior:
- In Web::DOM::Document::interpreter() the on_call_stack_emptied hook
used to print any uncaught exception but this is now no longer
possible as the VM does not store uncaught exceptions.
- In js the code used to be interruptable by throwing an exception on
the VM. This is no longer possible but was already somewhat fragile
before as you could happen to throw an exception just before a VERIFY.
Using a file(GLOB) to find all the test files in a directory is an easy
hack to get things started, but has some drawbacks. Namely, if you add
a test, it won't be found again without re-running CMake. `ninja` seems
to do this automatically, but it would be nice to one day stop seeing it
rechecking our globbed directories.
Previously, HTMLToken would expose the Vector<Attribute> directly to
its users. In preparation for a future change, all users now use
implementation-agnostic APIs which do not expose the Vector directly.
This fixes parsing the following regular expression: /</g;
It also adds a simple script element to the HTMLTokenizer regression
test, which also contains that specific regex.
The test suite includes a few basic tests and a very crude regression
test, which just concatenates the to_string() of all tokens and checks
the String's hash to be equal. This relies on the format of
HTMLToken::to_string() to stay the same, which is not ideal.
Previously, AK::Function would accept _any_ callable type, and try to
call it when called, first with the given set of arguments, then with
zero arguments, and if all of those failed, it would simply not call the
function and **return a value-constructed Out type**.
This lead to many, many, many hard to debug situations when someone
forgot a `const` in their lambda argument types, and many cases of
people taking zero arguments in their lambdas to ignore them.
This commit reworks the Function interface to not include any such
surprising behaviour, if your function instance is not callable with
the declared argument set of the Function, it can simply not be
assigned to that Function instance, end of story.