We can't decode any actual image data yet, but it shows that we can
read the basics of the container format. (...as long as there's an
Annex I container around the data, not just an Annex A codestream.
All files I've found so far have the container.)
I drew the thes input in Acorn.app and used "Save as..." to save it as
JPEG2000. It's an RGBA image.
This adds a test for the code added in #23696.
I created this file using `jbig2` (see below for details), but as
usual it required a bunch of changes to it to make it actually produce
spec-compliant output. See the PR adding this image for my local diff.
I created the test image file by running this shell script with
`jbig2` tweaked as described above:
#!/bin/bash
set -eu
S=Tests/LibGfx/test-inputs/bmp/bitmap.bmp
# See make-symbol-jbig.sh (the script in #23659) for the general
# setup and some comments. Note that the symbol section here only
# has 3 symbols, instead of 4 over there.
#
# `-RefID` takes 6 arguments:
# 1. The symbol ID of the base symbol (like after an `-ID`)
# 2. A bmp file that the base symbol gets refined to
# 3. y, x (like after an `-ID`)
# 4. dx, dy (note swapped order to previous item)
#
# We also explicitly set refinement adaptive pixels, because the
# default adaptive refinement pixels aren't the nominal pixels from
# the spec.
cat << EOF > jbig2-symbol-textrefine.ini
-sym -Seg 1
-sym -file -numClass -HeightClass 3 -WidthClass 1
-sym -file -numSymbol 3
-sym -file -Height 250
-sym -file -Width 120 -Simple 0 mouth-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 100
-sym -file -Width 100 -Simple 1 nose-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 30
-sym -file -Width 30 -Simple 2 top_eye-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -Param -Huff_DH 0
-sym -Param -Huff_DW 0
-txt -Seg 2
-txt -Param -numInst 4
-ID 2 108 50 -RefID 2 bottom_eye-1bpp.bmp 265 60 0 0
-ID 1 100 135 -ID 0 70 232
-txt -Param -RefCorner 1
-txt -Param -Xlocation 0
-txt -Param -Ylocation 0
-txt -Param -W 399
-txt -Param -H 400
-txt -Param -rATX1 -1
-txt -Param -rATY1 -1
-txt -Param -rATX2 -1
-txt -Param -rATY2 -1
EOF
J=$HOME/Downloads/T-REC-T.88-201808-I\!\!SOFT-ZST-E/Software
J=$J/JBIG2_SampleSoftware-A20180829/source/jbig2
$J -i "${S%.bmp}" -f bmp -o symbol-textrefine -F jb2 -ini \
jbig2-symbol-textrefine.ini
Template 2 is needed by some symbols in 0000372.pdf page 11 and
0000857.pdf pages 1-4. Implement the others too while here. (The
mentioned pages in those two PDFs also use the "end of stripe" segment,
so they still don't render yet.
We still don't support EXTTEMPLATE.
This was added in commit f2663f477f as a
partial implementation of what is now LibWeb's forgiving Base64 decoder.
All use cases within LibWeb that require whitespace skipping now use
that implementation instead.
Removing this feature from AK allows us to know the exact output size of
a decoded Base64 string. We can still trim whitespace at the start and
end of the input though; for example, this is useful when reading from a
file that may have a newline at the end of the file.
This is a fetching AO and is only used by LibWeb in the context of fetch
tasks. Move it to LibWeb with other fetch methods.
The main reason for this is that it requires the use of other LibWeb AOs
such as the forgiving Base64 decoder and MIME sniffing. These AOs aren't
available within LibURL.
This extracts the bitbuffer combining code we had into a new function
composite_bitbuffer() and adds the following features:
* Real support for combination operators (which also lets us allow black
as background color again, even if that's never used in practice)
* Clipping support (not used here yet, but will be needed elsewhere
soon)
We're going to need this for text segment handling.
No behavior change.
If box is sized as replaced it still could be anything, not only SVG.
This fixes crashing on https://www.shopify.com/ that was caused by a
missing paintable for a box that has a layout node. This occurred
because the box was not laid out in dimension_box_on_line().
`Node::shadow_including_root()` was missing a null check, which caused
a crash when manipulating a select element, whose option elements were
initially detached.
The HTMLMediaElement, for example, contains spec text which states any
ongoing fetch process must be "stopped". The spec does not indicate how
to do this, so our implementation is rather ad-hoc.
Our current implementation may cause a crash in places that assume one
of the fetch algorithms that we set to null is *not* null. For example:
if (fetch_params.process_response) {
queue_fetch_task([]() {
fetch_params.process_response();
};
}
If the fetch process is stopped after queuing the fetch task, but not
before the fetch task is run, we will crash when running this fetch
algorithm.
We now track queued fetch tasks on the fetch controller. When the fetch
process is stopped, we cancel any such pending task.
It is a little bit awkward maintaining a fetch task ID. Ideally, we
could use the underlying task ID throughout. But we do not have access
to the underlying task nor its ID when the task is running, at which
point we need some ID to remove from the pending task list.
I created this file using `jbig2` (see below for details), but as
far as I can tell `jbig2` does not produce spec-compliant files:
1. It always writes to 0s for the run lengths that specify how
many symbols to export at the end of a symbol segment
2. It doesn't write any referred-to segments for text segments.
I think it's supposed to write a referred-to segment that
mentions the symbol segment the text segment refers to (?)
I locally tweaked `jbig2` to fix these two defects (*), so the image
added in this commit is correct as best I can tell. It opens fine
using `image` and `jbig2`'s decode mode, and via
`Meta/jbig2_to_pdf.py` in Firefox and Chrome. Without my tweaks,
the image decodes fine with `jbig2`, but not with any of the other
three. The image (in a pdf) does _not_ decode in Preview.app,
either with or without my local `jbig2` tweaks.
*: See the PR adding this image for my local diff.
I created the test image file by running this shell script with
`jbig2` tweaked as described above:
#!/bin/bash
set -eu
I=Build/lagom/bin/image
S=Tests/LibGfx/test-inputs/bmp/bitmap.bmp
$I "$S" --crop 232,70,120,250 -o mouth.bmp
$I "$S" --crop 135,100,100,100 -o nose.bmp
$I "$S" --crop 50,108,30,30 -o top_eye.bmp
$I "$S" --crop 60,265,30,30 -o bottom_eye.bmp
# I then manually converted those to 1bpp using Photoshop
# (Image->Mode->Grayscale, then Image->Mode->Bitmap...,
# File->Save As..., bmp) since `jbig2` gets confused by non-1bpp
# bmp files and `image` can't write 1bpp files :/
#
# (I tried `convert ${in} -monochrome ${in}-1bpp.bmp` via
# https://cancerberosgx.github.io/magic/playground/index.html
# first, but that produced bmp files that neither Preview.app nor
# `jbig2` could handle.)
#
# -HeightClass: Number of height classes
# -WidthClass: Maximum number of symbols in one height class
# -Simple means no refinement; the number after is the symbol's ID
# The 3 numbers afer `-ID` are id, y, x. The `-ID` are sorted by x.
# -RefCorner 1 means "top left".
#
# `jbig2` writes symbol and text segments as specified in the ini
# file, and then only stores the bits of the input image that aren't
# already set through symbol and text segments.
cat << EOF > jbig2-symbol.ini
-sym -Seg 1
-sym -file -numClass -HeightClass 3 -WidthClass 2
-sym -file -numSymbol 4
-sym -file -Height 250
-sym -file -Width 120 -Simple 0 mouth-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 100
-sym -file -Width 100 -Simple 1 nose-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -file -Height 30
-sym -file -Width 30 -Simple 2 top_eye-1bpp.bmp
-sym -file -Width 30 -Simple 3 bottom_eye-1bpp.bmp
-sym -file -EndOfHeightClass
-sym -Param -Huff_DH 0
-sym -Param -Huff_DW 0
-txt -Seg 2
-txt -Param -numInst 4
-ID 2 108 50 -ID 3 265 60 -ID 1 100 135 -ID 0 70 232
-txt -Param -RefCorner 1
-txt -Param -Xlocation 0
-txt -Param -Ylocation 0
-txt -Param -W 399
-txt -Param -H 400
EOF
J=$HOME/Downloads/T-REC-T.88-201808-I\!\!SOFT-ZST-E/Software
J=$J/JBIG2_SampleSoftware-A20180829/source/jbig2
$J -i "${S%.bmp}" -f bmp -o symbol -F jb2 -ini jbig2-symbol.ini
...because "change" event should be dispatched on control even if it
has "display: none" style.
This change fixes selection in labels dropdown on GitHub's "new issue"
page.
Previously, the invalid value default wasn't taken into account when
determining the value that should be returned from the getter of an
enumerated attribute. This caused a crash when an enumerated attribute
of type DOMString? was set to an invalid value.
In our implementation of the "apply the history step" algorithm, we
have to spin-wait for the completion of tasks queued on the event loop.
Before this change, we allowed tasks from any source to be executed
while we were waiting. It should not be possible because it allows to
interrupt history step application by anything, including another
history step application.
Fixes https://github.com/SerenityOS/serenity/issues/23598
This encoding scheme comes from section 5 of RFC 4648, as an
alternative to the standard base64 encode/decode methods.
The only difference is that the last two characters are replaced
with '-' and '_', as '+' and '/' are not safe in URLs or filenames.
If an unexpected token is encountered when parsing an SVG attribute it
is now immediately propagated with ErrorOr. Previously, some situations
where an unexpected token was encountered could cause a crash.
If `Document::resolve()` was called during parsing, it'd change the
reader's current position, so the parsing code that called it would
then end up at an unexpected position in the file.
Parser.cpp already had special-case recovery when a stream's length
was stored in an indirect reference.
Commit ead02da98ac70c ("/JBIG2Globals") in #23503 added another case
where we could resolve indirect reference during parsing, but wasn't
aware of having to save and restore the reader position for that.
Put the save/restore code in `DocumentParser::parse_object_with_index`
instead, right before the place that ultimately changes the reader's
position during `Document::resolve`. This fixes `/JBIG2Globals` and
lets us remove the special-case code for `/Length` handling.
Since this is kind of subtle, include a test.
This test uses a JBIG2Globals with an indirect reference,
and contains an indirect reference for a stream length.
When we parse the main JBIG2 image's stream, we unfilter
its data, which causes these two indirect references to
be resolved during parsing.
I started with the output of
Meta/jbig2_to_pdf.py -o foo.pdf \
Tests/LibGfx/test-inputs/jbig2/bitmap.jbig2
and then manually added a
/DecodeParms <</JBIG2Globals 6 0 R>>
entry pointing to an empty stream, and made that new stream
object's length an indirect reference too for good measure.
I used `mutool clean` to fix up offsets a bit. But that also
removes the indirect reference for a stream's length, so I
manually put that back in and adjusted the offset to the last
object in the xref table and the startxref value.
This URL library ends up being a relatively fundamental base library of
the system, as LibCore depends on LibURL.
This change has two main benefits:
* Moving AK back more towards being an agnostic library that can
be used between the kernel and userspace. URL has never really fit
that description - and is not used in the kernel.
* URL _should_ depend on LibUnicode, as it needs punnycode support.
However, it's not really possible to do this inside of AK as it can't
depend on any external library. This change brings us a little closer
to being able to do that, but unfortunately we aren't there quite
yet, as the code generators depend on LibCore.
Previously, we returned from the value setter if the specified value
was above the max value. This is not required, as the getter clamps the
returned value to the max value.
"TPGD" is short for "Typical Prediction for Generic Direct coding",
and the "ON" bit turns it on. In this mode, before decoding a line,
we decode a single bit first that controls if the current line is
just a copy of the previous line. If so, the line's pixels aren't
encoded, the decoder just copies the previous line.
I created this by running
jbig2 -i Tests/LibGfx/test-inputs/bmp/bitmap -f bmp \
-o bitmap -F jb2 -ini tpgdon.ini
where tpgdon.ini contained:
-Gen -Seg 1
-Gen -Param -TpGDon 1
See previous commits in this directory for details on the `jbig2` tool.
Sadly, the TPGDON writing path in `jbig2` wasn't implemented yet,
so I had to add this. See the PR that added this commit for my
local diff to `jbig2`.
I'm somewhat confident that my change to `jbig2` (and hence the
image added in this commit) is correct because:
1. `jbig2` succeeds in converting this file to a bmp file,
while it failed without my patch (the decoding codepath in
`jbig2` does have TPGDON support)
2. Other pdf viewers display the output of
`Meta/jbig2_to_pdf.py -o foo.pdf path/to/bitmap-tpgdon.jbig2 399 400`
the same way we do
