RFC9293 states that from the TimeWait state the TCPSocket
should wait the MSL (2mins) for delayed segments to expire
so that their sequence numbers do not clash with a new
connection's sequence numbers using the same ip address
and port number. The wait also ensures the remote TCP peer
has received the ACK to their FIN segment.
Please be aware that I only have NIC with chip version 6 so
this is the only one that I have tested. Rest was implemented
via looking at Linux rtl8169 driver. Also thanks to IdanHo
for some initial work.
Either we mount from a loop device or other source, the user might want
to obfuscate the given source for security reasons, so this option will
ensure this will happen.
If passed during a mount, the source will be hidden when reading from
the /sys/kernel/df node.
Similarly to DevPtsFS, this filesystem is about exposing loop device
nodes easily in /dev/loop, so userspace doesn't need to do anything in
order to use new devices immediately.
Instead of returning a raw pointer, which could be technically invalid
when using it in the caller function, we return a valid RefPtr of such
device.
This ensures that the code in DevPtsFS is now safe from a rare race
condition in which the SlavePTY device is gone but we still have a
pointer to it.
This device is a block device that allows a user to effectively treat an
Inode as a block device.
The static construction method is given an OpenFileDescription reference
but validates that:
- The description has a valid custody (so it's not some arbitrary file).
Failing this requirement will yield EINVAL.
- The description custody points to an Inode which is a regular file, as
we only support (seekable) regular files. Failing this requirement
will yield ENOTSUP.
LoopDevice can be used to mount a regular file on the filesystem like
other supported types of (physical) block devices.
Instead of using C-arrays, and manually counting their lengths, use
AK::Array. And pass these arrays around as spans, instead of as pointer-
and-length pairs.
Such operation is almost equivalent to writing on an Inode, so lock the
Inode m_inode_lock exclusively.
All FileSystem Inode implementations then override a new method called
truncate_locked which should implement the actual truncating.
thread_context_first_enter reuses the context restoring code in the
trap handler, just like other arches already do.
The `ld x2, 1*8(sp)` is unnecessary in the trap handler, as the stack
pointer should be equal to the stack pointer slot in the RegisterState
if the trap is from supervisor mode (and we currently don't support
user traps).
This load will however make us unable to reuse that code for
thread_context_first_enter.
This commit adds two functions which save/restore the entire FPU state.
On RISC-V, you only need to save the floating pointer registers
themselves and the fcsr CSR, which contains the entire state of the F/D
extensions.
Some real hardware apparently uses smaller BAR sizes than sizeof(HBA)
with a completely filled port_regs member.
Change the port_regs array to a flexible array member, so we don't panic
while verifying that the BAR size is large enough to map this struct.
Accesses to this array are already bounds checked against
AHCI::Limits::MaxPorts.
Allowing creation of StorageDevicePartition objects for any arbitrary
BlockDevice objects means that we could technically create a
StorageDevicePartition for another StorageDevicePartition which is
obviously not the intention for this code. Instead, require to pass a
StorageDevice reference to ensure this cannot happen.
It is expected that these class members will be set when the object is
created (so they're set in the class constructor method) and never
change again, as its the driver responsibility to find these values
before creating a StorageDevice object.
This makes it easier to rely on these values later on as we don't expect
them to ever change for a StorageDevice object during its lifetime.
It calculated the disk size with the zero-based max addressable block
value.
For example, for a disk device with a block size of 512 bytes that has 2
LBAs so it can address LBA 0 and LBA 1 (so m_max_addressable_block is 1)
the calculated disk size will be 512 instead of 1024 bytes.
We remove can_read() and can_write(), as both of these methods should be
implemented for proper blocking support.
For our case, the previous code will simply block the user if they tries
to read beyond the max addressable offset, which is not a correct
behavior.
Instead, just do proper EOF guarding when calling read() and write() on
such objects.
Add a method for matehmatical operations when verifying IO operation
boundaries.
Also, make max_addressable_block method non-virtual, since no other
derived class actually has ever overrided this method.
RFC9293 states that a closed socket should reply to all non-RST
packets with an RST. This change implements this behaviour as
specified in section 3.5.2 in bullet point 1.
The former automatically adapts the prefix to binary and octal
output, and is what we already use in the majority of cases.
Patch generated by:
rg -l '0x\{' | xargs sed -i '' -e 's/0x{:/{:#/'
I ran it 4 times (until it stopped changing things) since each
invocation only converted one instance per line.
No behavior change.
According to the Intel Software Developer's Manual Volume 3A section
6.12.1.3, the interrupt gate type means the IF flag is cleared to
prevent nested interruption. The trap gate type does not modify the
IF flag. Thus the gate type argument is important when constructing
an IDTEntry.
On x86_64 and x86, storage_segment (bit 12 counting from 0)
is always 0 according to the Intel Software Developer's Manual,
volume 3A, section 6.11 and section 6.14.1. It has therefore
been removed as a parameter from IDTEntry's constructor and
hardwired to 0.
