9.8 KiB
Troubleshooting
This document contains common problems and their solutions.
Refused to Connect in Modal or Workspace View
This is not an issue with Dashy, but instead caused by the target app preventing direct access through embedded elements. It can be fixed by setting the X-Frame-Options HTTP header set to ALLOW [path to Dashy] or SAMEORIGIN, as defined in RFC-7034. These settings are usually set in the config file for the web server that's hosting the target application, here are some examples of how to enable cross-origin access with common web servers:
NGINX
In NGINX, you can use the add_header module within the app block.
server {
...
add_header X-Frame-Options SAMEORIGIN always;
}
Then reload with service nginx reload
Caddy
In Caddy, you can use the header directive.
header {
X-Frame-Options SAMEORIGIN
}
Apache
In Apache, you can use the mod_headers module to set the X-Frame-Options in your config file. This file is usually located somewhere like `/etc/apache2/httpd.conf
Header set X-Frame-Options: "ALLOW-FROM http://[dashy-location]/"
Yarn Error
For more info, see Issue #1
First of all, check that you've got yarn installed correctly - see the yarn installation docs for more info.
If you're getting an error about scenarios, then you've likely installed the wrong yarn... (you're not the only one!). You can fix it by uninstalling, adding the correct repo, and reinstalling, for example, in Debian:
sudo apt remove yarncurl -sS https://dl.yarnpkg.com/debian/pubkey.gpg | sudo apt-key add -echo "deb https://dl.yarnpkg.com/debian/ stable main" | sudo tee /etc/apt/sources.list.d/yarn.listsudo apt update && sudo apt install yarn
Alternatively, as a workaround, you have several options:
- Try using NPM instead: So clone, cd, then run
npm install,npm run buildandnpm start - Try using Docker instead, and all of the system setup and dependencies will already be taken care of. So from within the directory, just run
docker build -t lissy93/dashy .to build, and then use docker start to run the project, e.g:docker run -it -p 8080:80 lissy93/dashy(see the deploying docs for more info)
Auth Validation Error: "should be object"
In V 1.6.5 an update was made that in the future will become a breaking change. You will need to update you config to reflect this before V 2.0.0 is released. In the meantime, your previous config will continue to function normally, but you will see a validation warning. The change means that the structure of the appConfig.auth object is now an object, which has a users property.
For more info, see this announcement.
You can fix this by replacing:
auth:
- user: xxx
hash: xxx
with
auth:
users:
- user: xxx
hash: xxx
DockerHub toomanyrequests
This situation relates to error messages similar to one of the following, returned when pulling, updating or running the Docker container from Docker Hub.
Continuing execution. Pulling image lissy93/dashy:release-1.6.0
error pulling image configuration: toomanyrequests
or
You have reached your pull rate limit. You may increase the limit by authenticating and upgrading: https://www.docker.com/increase-rate-limit
When DockerHub returns one of these errors, or a 429 status, that means you've hit your rate limit. This was introduced last year, and prevents unauthenticated or free users from running docker pull more than 100 times per 6 hours.
You can check your rate limit status by looking for the ratelimit-remaining header in any DockerHub responses.
Solution 1 - Use an alternate container registry
- Dashy is also availible through GHCR, which at present does not have any hard limits. Just use
docker pull ghcr.io/lissy93/dashy:latestto fetch the image - You can also build the image from source, by cloning the repo, and running
docker build -t dashy .or use the pre-made docker compose
Solution 2 - Increase your rate limits
- Logging in to DockerHub will increase your rate limit from 100 requests to 200 requests per 6 hour period
- Upgrading to a Pro for $5/month will increase your image requests to 5,000 per day, and any plans above have no rate limits
- Since rate limits are counted based on your IP address, proxying your requests, or using a VPN may work
Config Validation Errors
The configuration file is validated against Dashy's Schema using AJV.
First, check that your syntax is valid, using YAML Validator or JSON Validator. If the issue persists, then take a look at the schema, and verify that the field you are trying to add/ modify matches the required format. You can also use this tool to validate your JSON config against the schema, or run yarn validate-config.
If you're trying to use a recently released feature, and are getting a warning, this is likely because you've not yet updated the the current latest version of Dashy.
If the issue still persists, you should raise an issue.
Node Sass does not yet support your current environment
Caused by node-sass's binaries being built for a for a different architecture
To fix this, just run: yarn rebuild node-sass
Error: Cannot find module './_baseValues'
Clearing the cache should fix this: yarn cache clean
If the issue persists, remove (rm -rf node_modules\ yarn.lock) and reinstall (yarn) node_modules
Invalid Host Header while running through ngrok
Just add the -host-header flag, e.g. ngrok http 8080 -host-header="localhost:8080"
Warnings in the Console during deploy
Please acknowledge the difference between errors and warnings before raising an issue about messages in the console. It's not unusual to see warnings about a new version of a certain package being available, an asset bundle bing oversized or a service worker not yet having a cache. These shouldn't have any impact on the running application, so please don't raise issues about these unless it directly relates to a bug or issue you're experiencing. Errors on the other hand should not appear in the console, and they are worth looking into further.
Docker Login Fails on Ubuntu
Run sudo apt install gnupg2 pass && gpg2 -k
Status Checks Failing
If you're using status checks, and despite a given service being online, the check is displaying an error, there are a couple of things you can look at:
If your service requires requests to include any authorization in the headers, then use the statusCheckHeaders property, as described in the docs.
If you are still having issues, it may be because your target application is blocking requests from Dashy's IP. This is a CORS error, and can be fixed by setting the headers on your target app, to include:
Access-Control-Allow-Origin: https://location-of-dashy/
Vary: Origin
If the URL you are checking has an unsigned certificate, or is not using HTTPS, then you may need to disable the rejection of insecure requests. This can be done by setting statusCheckAllowInsecure to true for a given item.
If you get an error, like Service Unavailable: Server resulted in a fatal error, even when it's definitely online, this is most likely caused by missing the protocol. Don't forget to include https:// (or whatever protocol) before the URL, and ensure that if needed, you've specified the port.
Currently, the status check needs a page to be rendered, so if this URL in your browser does not return anything, then status checks will not work. This may be modified in the future, but in the meantime, a fix would be to make your own status service, which just checks if your app responds with whatever code you'd like, and then return a 200 plus renders an arbitrary message. Then just point statusCheckUrl to your custom page.
For further troubleshooting, use an application like Postman to diagnose the issue. Set the parameter to GET, and then make a call to: https://[url-of-dashy]/status-check/?&url=[service-url]. Where the service URL must have first been encoded (e.g. with encodeURIComponent() or urlencoder.io)
If you're serving Dashy though a CDN, instead of using the Node server or Docker image, then the Node endpoint that makes requests will not be available to you, and all requests will fail. A workaround for this may be implemented in the future, but in the meantime, your only option is to use the Docker or Node deployment method.