refs https://github.com/TryGhost/Team/issues/637
The "free" price - when Members signup without using Stripe, should have
a name and description, so that it can be displayed in Portal in a
similar way to paid price's. As there is only ever one, and it is not a
fully fledged price, a setting makes more sense than a dedicated db
table.
refs https://github.com/TryGhost/Team/issues/586
We are no longer using the `stripe_plans` setting, instead we are using
the `stripe_prices` database table. However, we must keep the setting as
the migration from the setting to the database is not done as a standard
migration, but in code. This means our code has to still read and pass
the setting because we will never know if the migration in code has run
yet.
The `portal_plans` setting has been updated to only include 'free' by
default, because the setting must include id's now rather than names.
refs https://github.com/TryGhost/Team/issues/588
refs d72ba77aba
- When limit is in place we don't want to allow sending out a new batch of emails if it would go over limit
- See referenced commit for example configuration
refs https://github.com/TryGhost/Team/issues/588
- This is a new type of limit allowing to measure resource use (e.g. sent emails) per period (e.g. subscription, billing, cycle, etc)
- To enable periodical limit add following values under `hostSettings.limits`:
```
"emails": {
"maxPeriodic": 10,
"error": "Your plan supports up to {{max}} emails. Please upgrade to reenable sending emails."
}
```
and following under `hostSettings.subscription`:
```
"subscription": {
"start": "2020-04-02T15:53:55.000Z",
"interval": "month"
}
```
- Above config would allow checking if 10 emails per month starting on the 2nd of every month has been reached untill now
refs https://github.com/TryGhost/Team/issues/665
Portal only needs to work with active prices(not archived), this change filters prices sent to Portal to only include active prices
refs https://github.com/TryGhost/Team/issues/586
A discussion in the Members team resulted in us determining that we do
not need to enforce unique names for Products. Stripe does not enforce
uniqueness for their Products, and we feel it's not necessary for us to.
refs: https://github.com/TryGhost/Ghost/commit/7bce05ab8
- I wrote a custom plugin for the no-cross-requires logic between our modules after not finding anything that could do it
- Then, when searching for the next rule I wanted, I found eslint-plugin-ghost has no-restricted-requires
- This rule is more flexible, so switching to it
- NOTE: This update to eslint-plugin-ghost also fixes performance of linting our test files by pinning eslint-plugin-mocha to v7 as v8 has performance problems
refs 37ebe723c6
- `package-json` was a standalone library using dependency injection so
we could pull it out into its own package in Utils
- this was done in the commit referenced above
- this commit removes the implementation and tests in Ghost and replaces
the require in the initialization wrapper with the new package
refs https://github.com/TryGhost/Team/issues/581
refs https://github.com/TryGhost/Team/issues/582
When publishing a post via the API it was possible to send it using `?email_recipient_filter=all/free/paid` which allowed you to send to members only based on their payment status which is quite limiting for some sites.
This PR updates the `?email_recipient_filter` query param to support Ghost's `?filter` param syntax which enables more specific recipient lists, eg:
`?email_recipient_filter=status:free` = free members only
`?email_recipient_filter=status:paid` = paid members only
`?email_recipient_filter=label:vip` = members that have the `vip` label attached
`?email_recipient_filter=status:paid,label:vip` = paid members and members that have the `vip` label attached
The older `free/paid` values are still supported by the API for backwards compatibility.
- updates `Post` and `Email` models to transform legacy `free` and `paid` values to their NQL equivalents on read/write
- lets us not worry about supporting legacy values elsewhere in the code
- cleanup migration to transform all rows slated for 5.0
- removes schema and API `isIn` validations for recipient filters so allow free-form filters
- updates posts API input serializers to transform `free` and `paid` values in the `?email_recipient_filter` param to their NQL equivalents for backwards compatibility
- updates Post API controllers `edit` methods to run a query using the supplied filter to verify that it's valid
- updates `mega` service to use the filter directly when selecting recipients
refs https://github.com/TryGhost/Team/issues/581
Editors are allowed to restrict post visibility and send emails to particular member segments, they need to be able to read labels so that they can select them in a member segment.
refs https://github.com/TryGhost/Team/issues/637
refs 75169b705b
With custom prices, Portal now needs to show all available custom prices in the UI as well as product's name and description in the Portal UI. This change adds product information to member site settings for Portal UI.
refs https://github.com/TryGhost/Team/issues/586
refs aa12770329
Using `id` as ghost id for subscription prices can be confusing as everything in the method refers ids to be stripe ids. This change updates the ghost id value to use `price_id` key in the serialization
- Using JS files to configure eslint gives us more power, e.g. being able to calculate paths
- We already use JS in pretty much every other repo we own, including admin... it's just Ghost we don't, and it's time!
refs https://github.com/TryGhost/Team/issues/496
We want to give more control over the default selection of email recipients when publishing a post, to do that we need somewhere to store those settings. These settings are site-wide and intended for use by admins to control the default editor behaviour for all staff users. They _do not_ control API behaviour, if you want to send email when publishing via the API it's still necessary to explicitly opt in to that using the `?email_recipients_filter=` query param.
- new `editor` settings group to indicate that these settings only affect the UI rather than the API
- `editor_default_email_recipients` controls overall behaviour, string/enum with these allowed values:
- `'disabled'`: no option to send email is shown in the editor's publishing dropdown
- `'visibility'`: (default) selected member segment is dynamic and matches the post visibility filter
- `'filter'`: specific member filter defined in `editor_default_email_recipients_filter` setting
- `editor_default_email_recipients_filter` is an NQL string for selecting members, used when `editor_default_email_recipients` is set to `'filter'`
- default value is `'all'`
- the segment string can be any valid NQL filter with the additional special-case values of `'all'` and `'none'`
- we need the basePath concept for the main i18n class so we can pull it out into a module
- we already had this in the themeI18n class, so I just had to move it up
- also I added a default of __dirname, so we don't have to declare this constantly in the tests
- Reworking the location of i18n in boot has fixed the main error
- However, many of our tests depend on i18n being loaded but don't explicitly call init
- There are many ways we could fix this in our tests, but I don't want to spend more time on this now
no issue
- `Error` is very generic for this case and `IncorrectUsageError`
will populate the resulting error with the correct error code
- the `message` was pulled out to its own statement so we can avoid long
lines
no issue
- we're preparing the `package-json` lib to be extracted out of Ghost into
its own package so moving the initialization wrapper outside of the
folder makes the process a lot easier
refs https://github.com/TryGhost/Team/issues/586
refs 33f26fbf32
As part of serializing subscriptions with prices, we previously attached only the stripe price id to the price object for subscription. This change updates the price object to include both Ghost id and stripe price id for the object, as Portal needs to check the Ghost price id for logged in members to verify their current plan.
- final preparation for moving i18n out of Ghost core
- logging is passed in via DI
- theme i18n needs a config value, but no need to pass all of config for one parameter, a better pattern is to pass the one value needed
- preparation for moving the base class out of Ghost
- refactored so that all the logic for file loading and fallbacks live in the base class
- theme i18n now only overrides init with the properties it needs, filepath generation and error handling
- this makes it much easier to move the i18n file out, and eventually have theme i18n live elsewhere too
- also prepares for using DI for logging
- calling i18n as a global const like this requires it to be loaded before anything else, when we have to manage this with the init() flow
- wrapping it inside the function where it's used ensures we don't call i18n til we need it
- also improved the i18n called without init error to include the key it was called with
- Note: added a forced error to show that this was previously happening at the wrong time
- i18n is required by ghost-server to log server start messages, and so gets initialised as part of the ghost-server load
- moving this into the right place means we can see how long it takes in the debug logs
- previously the debug log lines for i18n showed 0/1ms, which is not correct as this contains a sync file load operation!
- we should consider if we want to have i18n be a requirement for ghost server, or if we want static messages
- when activating a theme, we need to load the current locale
- this request used to be buried deep in the themeI18n init call
- now we surface it in the bridge and pass it down, which is closer to what we want to do with eventually initialising the frontend
with everything it needs up front (or not initialising it, if it isn't needed)
- in the related helpers we depend on the site.locale value instead of proxy -> themeI18n -> settingsCache drastically simplifying the code and removing deep requires
- site.locale is updated via middleware and can be relied upon
- the core i18n library and theme i18n library have slightly different methods of getting a candidate string
- both of them use forms of jsonpath, meaning they both require jsonpath as a dependency
- to try to get to a point of being able to rip more things out of ghost, we want to have less dependencies
- so instead of overloading the method, we pass in a stringMode as an argument
- eventually we might not need an overloaded class for themeI18n at all, which would simplify the codebase
- preparation for using DI instead of requires, so we can move this out of Ghost
- have done this for both the main i18n and theme i18n file
- refactored the constructor
refs 57ff38da8a
- we're dropping support for Node 10 which involved bumping the Node
version we run our Ghost-CLI tests on but they fail because Ghost v1
and v2 don't support Node 12
- this commit disables these tests until we come up with a good
workaround
refs https://github.com/TryGhost/Team/issues/658
- Ghost-CLI 1.17.0 displays warnings when users are on an unsupported
version of Node, or are running a Ghost version that is EOL
- by bumping this here, we can force users to update to CLI 1.17.0 to
get these features
refs https://github.com/TryGhost/Team/issues/658
- Node 10 become EOL as of April 30th so it's time to drop support
- this commit:
- removes the Node 10 range from the `node` `engines` block
- removes Node 10 from CI tests
- switches Node 10 in the CLI test to Node 12 so we can ensure it
installs on our oldest supported Node version
- We only require a single value from urlUtils, the url for the site
- Move that logic back to the boot file makes it much more explict
- Will help if we want to refactor how urlUtils works, or when we want to move ghost-server out of core
- single authors were deprecated in v1.22 when we added multiple authors
- we always thought we'd clean this up a lot sooner, but it's stuck because it's an annoying thing to break people's shit over
- still saying "remove in vX" isn't useful, we need to know how long a feature has been deprecated so we can judge whether it's safe to remove
refs https://github.com/TryGhost/Team/issues/637
With custom prices, Portal now needs to show all available custom prices in the UI instead of just `monthly` and `yearly` prices. This change adds a list of all custom prices to Portal site settings for the default product which Portal will use to show the available prices in UI.
Note: As part of cleanup, the stripe price ids will be removed from the prices list.
Also:
- Fixes product name in serialised subscriptions
- Adds `type` value in serialised price object
