Dustin Carlino
e0b6e94f26
In the LTN browse and connectivity tool, draw the areas after the map
...
background and water/parks, but before everything else. It's much easier
to understand the actual basemap this way -- you can see roads clearly.
2022-02-01 09:31:28 +00:00
Dustin Carlino
e5704f4a6d
Prevent many cases of blocks with overlapping geometry or that extend
...
too far, by not trying to trace near railways or cycle-only
bridges/tunnels. This is an imperfect heuristic, but it makes
significant progress in most maps.
2022-01-31 16:03:21 +00:00
Dustin Carlino
060decbdd3
Put a minimal UI around saving/loading LTN proposals
2022-01-31 13:30:55 +00:00
Dustin Carlino
f8dfe32c04
Save LTN edits to files and load from CLI. No proper UI yet, and the
...
format isn't future-proof at all.
2022-01-31 13:30:55 +00:00
Dustin Carlino
942c3ecdaf
Make SimpleApps all manage their own CLI parsing, so they can add their own overrides.
2022-01-31 13:30:55 +00:00
Dustin Carlino
eda9ff20bd
new release
2022-01-30 19:30:52 +00:00
Dustin Carlino
0058f99da2
Mechanical rename of TripEndpoint::Bldg to ::Building, mostly to kick off a [rebuild] [release]
2022-01-30 18:27:36 +00:00
Dustin Carlino
3d33d2743b
Document the new synthpop crate.
...
I regenerated some scenarios; no diff. The prebaked summaries change a
bit, but not the prebaked results -- not sure, but going to proceed.
2022-01-28 13:13:43 +00:00
Dustin Carlino
638e93c36a
Stop re-exporting stuff from synthpop in sim
2022-01-28 13:13:43 +00:00
Dustin Carlino
f171ddcb73
Get everything to build again...
2022-01-28 13:13:43 +00:00
Dustin Carlino
9845d9cae1
Implement the two public TripEndpoint methods in synthpop, but without needing to drag in SidewalkSpot and DrivingGoal
2022-01-28 13:13:43 +00:00
Dustin Carlino
3f8689b9ea
Rearrange methods defined on Scenario that're only for the sim crate
2022-01-28 13:13:43 +00:00
Dustin Carlino
231acf47a2
Step 2: try to get the sim crate to build again
...
Scenario and TripEndpoint have some methods defined on them that're
specific to sim. Do we rearrange these methods entirely or make some
kind of wrapper types?
2022-01-28 13:13:43 +00:00
Dustin Carlino
e45a5181db
Split the "input" layer of the sim crate into a synthetic population
...
crate, in preparation for future focus on travel demand models that
incorporate more per-person info.
Note: I'm also a bit tempted to try to further split sim into a
"high-level" layer that orchestrates spawning and different legs of a
trip, from the "low-level" layer that moves pedestrians and vehicles.
That could _possibly_ pave the way for someday using a different traffic
simulation backend with more realistic movement mechanics.
Step 1: just get the synthpop crate to build
2022-01-28 13:13:43 +00:00
Dustin Carlino
6c2a581be5
Simplify traffic count code -- directly deal in Counters
2022-01-28 10:40:56 +00:00
Dustin Carlino
921228b7bf
Add a headless API command to load a map with an empty simulation. #838
2022-01-28 09:37:25 +00:00
Dustin Carlino
47962cfdbd
Add a headless API command to snap a point to the nearest road, for https://github.com/dabreegster/urban_observatory_abst
2022-01-27 17:44:48 +00:00
Dustin Carlino
fefe8f5be2
Swap the traffic counts in the UI
2022-01-27 15:21:21 +00:00
Dustin Carlino
e542011614
More fluid UI for comparing traffic counts -- hotkeys
...
Had to change the API of on_click...
2022-01-27 15:13:24 +00:00
Dustin Carlino
e21c57b70a
When calculating traffic volumes, deduplicate path requests first.
...
Around 2x less paths to calculate.
Even though the deduplication throws away some info, the net effect for
measuring traffic volumes is practically equivalent, so it's a
worthwhile optimization. Used the new comparison UI to verify that!
2022-01-27 14:26:36 +00:00
Dustin Carlino
edfd320908
A new generic UI to compare counts from two files.
...
Also moving some of the counts stuff to map_gui, accordingly
2022-01-27 14:26:36 +00:00
Dustin Carlino
c33ba85cfe
Make LTN impact prediction use the new common code
2022-01-27 14:26:36 +00:00
Dustin Carlino
a6b4f8879a
Refactor parts of the LTN impact prediction into a separate UI just for
...
comparing count data.
Don't use it yet
2022-01-27 14:26:36 +00:00
Dustin Carlino
ee8c8d8611
Simplify impact results plumbing
2022-01-27 09:44:13 +00:00
Dustin Carlino
be57975a91
Start to shape the LTN impact tool into something more general to plug a
...
demand model into routing and compare throughput before/after some
change.
Add in a bunch of filters for trips. (Most even work!)
2022-01-26 14:17:24 +00:00
Dustin Carlino
e318f2733b
Import Wokingham
2022-01-26 12:09:37 +00:00
Dustin Carlino
cabffc7f47
Similar refactor for ColorDiscrete. Anywhere separately managed a zoomed
...
and unzoomed batch should just migrate to this.
2022-01-26 11:35:40 +00:00
Dustin Carlino
5dfb8f26f0
Refactor ColorNetwork to use ToggleZoomed
2022-01-26 11:31:33 +00:00
Dustin Carlino
ec0fd1b94d
Stop running out of video memory in the LTN impact prediction tool.
...
- One batch for all neighborhoods
- One batch for all roads/intersections
- No pre-built tooltips
This all comes at more repetitive code. Need to make World generate some
stuff dynamically (#763 )
2022-01-26 11:26:03 +00:00
Dustin Carlino
deffc35fd7
Optionally generate a scenario for one-shot imported UK maps. #842
2022-01-26 10:31:38 +00:00
Dustin Carlino
0203de046d
Don't repeatedly try to merge blocks in the select boundary UI. An optimization to workaround new sanity checks introduced for #841
2022-01-26 10:15:31 +00:00
Dustin Carlino
dfbd9785f3
While merging adjacent perimeters for the LTN tool, don't proceed if
...
intermediate results can't be turned into a polygon. It'll break
something later. #841
There's a particular bug where a perimeter can be turned into a polygon,
but after collapsing internal dead-ends, it can't.
If we don't do this, the LTN select boundary UI crashes, and reasoning
about block -> neighborhood mappings gets very hairy. I'd like to
address all the root causes of failing to make a polygon, but until
then...
TRADE-OFF: it _really_ slows down the select boundary UI.
2022-01-25 18:12:15 +00:00
Dustin Carlino
eba579dbd1
Adjust the definition of cycleway roads to include sidewalks. Any road
...
with only bike lanes and any walkable lane counts as a cycleway, for
rendering purposes. So if you change a road with sidewalks to only allow
bikes on the road, it shows up green in the unzoomed layer.
There's lots of nuance with footways that doesn't matter yet, because
we're mostly not importing those yet.
2022-01-25 14:10:39 +00:00
Dustin Carlino
9192c6364b
Avoid crash in the blockfinder when merging partitions manually
2022-01-25 14:01:24 +00:00
Dustin Carlino
847ca07bc6
Add the quick-select feature to the blockfinder debugging too
2022-01-25 13:54:30 +00:00
Dustin Carlino
deb775b409
Debug block partitioning by color, to sanity check why some blocks are vanishing when merged
2022-01-25 13:39:40 +00:00
Dustin Carlino
61d7a03cbd
Import Levenshulme for traffic sensor study
2022-01-25 12:32:37 +00:00
Dustin Carlino
37404044e3
Avoid crashing in PolyLine::dist_along due to floating point issues.
...
This was happening when trying to draw pedestrians sometimes.
Regenerate everything. Some maps/scenarios affected, but in tiny
imperceptible ways. No screenshot diff.
2022-01-24 20:47:02 +00:00
Dustin Carlino
2683f32d28
Clarify an error message
2022-01-24 15:42:14 +00:00
Dustin Carlino
7bb8c13270
At last, support splitting neighborhoods while selecting boundaries!!!
2022-01-24 15:33:34 +00:00
Dustin Carlino
e7aeaf39de
Remove confusing and redundant state in the select boundary UI.
2022-01-24 15:13:15 +00:00
Dustin Carlino
246d3347ca
Don't use a special color for the current neighborhood in the select boundary UI. The red outline accomplishes the same thing, and it's less confusing to jump colors from the browse screen
2022-01-24 13:26:48 +00:00
Dustin Carlino
f777d0ba10
Shift logic from the select boundary UI to the partitioning structure.
...
That was the original intention, but it wound up being easier to
prototype otherwise.
Should be no behavioral changes.
2022-01-24 13:13:05 +00:00
Dustin Carlino
2c089cf1a3
Refactor select boundary logic, carefully
2022-01-24 10:15:27 +00:00
Dustin Carlino
3b6391f18d
Create new neighborhoods when we remove a block from an edge.
...
It works! But with uncomfortably duplicated code
2022-01-24 09:41:31 +00:00
Dustin Carlino
f91f70f5d4
Improve boundary selection. When removing a block, search the whole
...
perimeter for another neighborhood to donate to, before concluding we're
near the map boundary.
2022-01-24 09:26:56 +00:00
Dustin Carlino
bc4f59e566
new release
2022-01-23 18:33:39 +00:00
Dustin Carlino
02e1368e0c
Update github workflow to build the split-out LTN tool [rebuild] [release]
2022-01-23 10:27:32 +00:00
Dustin Carlino
33332bd12f
Be careful with relative count math, avoiding one crash. [rebuild] [release]
...
But also, just disable the analysis for the release. It eats through all
my GPU memory on larger maps.
2022-01-23 09:37:45 +00:00
Dustin Carlino
b6b69aa886
Be smarter with LTN impact prediction memory usage.
...
... but this doesn't actually fix the mysterious crash in Camden and
other maps?!
2022-01-23 09:37:45 +00:00