Discrete-event simulation

The traffic simulation models different agents (cars, bikes, buses, pedestrians, and intersections) over time. Agents don't constantly sense and react to the world every second; instead, they remain in some state until something interesting happens. This is a discrete-event architecture -- events are scheduled for some time in the future, and handling them changes the state of some agents. The core simulation loop simply processes events in order -- see scheduler.rs and the step method in sim.rs.

Cars

(Note: Cars, bikes, and buses are all modeled the same way -- bikes just have a max speed, and buses/bikes can use restricted lanes.)

Cars move through a sequence of lanes and turns (movements through an intersection). They queue and can't over-take a slow lead vehicle. The main simplifying assumption in A/B Street is that cars can instantly accelerate and decelerate. This wouldn't model highway driving at all, where things like jam waves are important, but it's reasonable for in-city driving. The essence of scarcity is the capacity on lanes and the contention at intersections. What happens in between isn't vital to get exactly right.

A car has a few states (mechanics/car.rs):

• Crossing some distance of a lane/turn over some time interval
• Queued behind another car on a lane/turn
• WaitingToAdvance at the end of a lane, blocked on an intersection
• A few states where the car stays in one place: Parking, Unparking, and Idling (for buses at a stop)

State transitions happen in mechanics/driving.rs. This is best explained by an example sequence:

• A car enters the Unparking state, taking a fixed 30s to exit a parking spot and enter the adjacent driving lane. The driving lane is blocked during this time, to mimic somebody pulling out from a parallel parking spot.
• The car is now fully somewhere on the driving lane. It enters the Crossing state, covering the remaining distance to the end of the road. The time interval is calculated assuming the car travels at the max speed limit of the road.
• After that time, the car checks if there's anybody in the queue before it. Nope? Then it attempts to initiate a turn through the intersection, but the stop sign says no, so the car enters the WaitingToAdvance state.
• Some time later, the stop sign wakes up the car. The car starts the turn, entering the Crossing state again.
• After finishing the turn, the car starts Crossing the next lane. When it's finished, it turns out there are a few cars ahead of it, so it enters the Queued state.
• When the lead vehicle directly in front of the car exits the lane, it wakes up the car, putting it in the Crossing state, starting at the appropriate following distance behind the lead vehicle. This prevents the car from immediately warping to the end of the lane when the lead vehicle is out of the way.
• And so on...

Exact positions

For a discrete-event simulation, we don't usually care exactly where on a lane a car is at some time. But we do need to know for drawing and for a few cases during simulation, such as determining when a bus is lined up with a bus stop in the middle of a lane. mechanics/queue.rs handles this, computing the distance of every car in a lane. For cars in the Crossing state, we linearly interpolate distance based on the current time. Of course, cars have to remain in order, so Queued cars are limited by the lead vehicle's position + the lead vehicle's length + a fixed following distance of 1m.

Another case where we need to know exact positions of cars is to prevent the first vehicle on a lane from hitting the back of a car who just left the lane. All vehicles have length, and position is tracked by the front of the car. When a car's front leaves a lane, its back is still partly in the lane. Logically, the new lead car in the lane still needs to act like it's Queued. So each lane keeps a "laggy head", pointing to the car with its back partly in the lane. After the laggy head has made it sufficient distance along its new turn or lane, the laggy head on the old lane can be erased, unblocking the lead vehicle. This requires calculating exact distances and some occasionally expensive cases where we have to schedule frequent events to check when a laggy head is clear.

Lane-changing

Lane-changing (LCing) deserves special mention. A/B Street cheats by not allowing it on lanes themselves. Instead, at intersections, cars can perform turns that shift them over any number of lanes. These LCing turns conflict with other turns appropriately, so the contention is still modeled. Why do it this way? In a previous project, I tried opportunistic LCing. If a car had room to warp to the equivalent distance on the adjacent lane without causing a crash, it would start LCing, then take a fixed time to slide over, blocking both lanes throughout. This meant cars often failed to LC when they needed to, forcing them to reroute, botching their trip times. In many cases the cars would be permanently stuck, because pathfinding would return paths requiring LCing that couldn't be pulled off in practice due to really short roads. Why not try making the car slow down if needed? Eventually it might have to stop, which could lead to unrealistic gridlock. This LCing model was using a detailed discrete-time model with cars accelerating properly; maybe it's easier with A/B Street's simplified movement model.

Currently in A/B Street, cars will pick the least backed-up lane when there's a choice. They make this decision once when they reach the front of a queue; look for opportunistically_lanechange in router.rs. The decision could be improved.

Pedestrians

Pedestrian modeling -- in mechanics/walking.rs is way simpler. Pedestrians don't need to queue on sidewalks; they can "ghost" through each other. In Seattle, there aren't huge crowds of people walking and slowing down, except for niche cases like Pike Place Market. So in A/B Street, the only scarce resource modeled is the time spent waiting to cross intersections.

Intersections

I need to flesh this section out. See mechanics/intersections.rs for how stop signs and traffic signals work. Two things I need to fix before making this section interesting:

• Only wake up relevant agents when a previous agent finishes a turn.
• Don't let an agent start a low-priority turn (like an unprotected left) if it'll force a high-priority vehicle approaching to wait. The approaching vehicle is still in the Crossing state, so we need to notify intersections ahead of time of intended turns and an ETA.

One contributor to permanent gridlock is cars and bikes being stuck in an intersection, preventing conflicting turns from being performed. To help avoid this, one of the last checks that stop signs and traffic signals perform before accepting a new turn request is that the target lane has enough space for the new vehicle. This is "reserved" space, not necessarily currently occupied by vehicles in that lane. This accounts for other vehicles performing a turn bound for that lane. See try_to_reserve_entry in mechanics/queue.rs. When a car completely leaves a lane (determined by the "laggy head" described above), this space is freed, and blocked cars are woken up.

Appendix: discrete-time simulation

A/B Street's first traffic model was discrete-time, meaning that every agent reacted to the world every 0.1s. Cars had a more realistic kinematics model, accelerating to change speed and gradually come to a halt. Cars did a worst-case estimation of how far ahead they need to lookahead in order to satisfy different constraints:

• Don't exceed any speed limits
• Don't hit the lead vehicle (which might suddenly slam on its brakes)
• Stop at the end of a lane, unless the intersection says to go

After fighting with this approach for a long time, I eventually scrapped it in favor of the simpler discrete-event model because:

• It's fundamentally slow; there's lots of busy work where cars in freeflow with nothing blocking them or stopped in a long queue constantly check to see if anything has changed.
• Figuring out the acceleration to apply for the next 0.1s in order to satisfy all of the constraints is really complicated. Floating point inaccuracies cause ugly edge cases with speeds that wind up slightly negative and with cars coming to a complete stop slightly past the end of a lane. I wound up storing the "intent" of an action to auto-correct these errors.
• The realism of having cars accelerate smoothly didn't add value to the core idea in A/B Street, which is to model points of contention like parking capacity and intersections. (This is the same reason why I don't model bike racks for parking bikes -- in Seattle, it's never hard to find something to lock to -- this would be very different if Copenhagen was the target.) Additionally, the kinematics model made silly assumptions about driving anyway -- cars would smash on their accelerators and brakes as hard as possible within all of the constraints.