With this change resolve and revert produce consistent output when run with no
arguments:
$ hg resolve
abort: no files or directories specified
(use --all to remerge all files)
$ hg revert
abort: no files or directories specified
(use --all to revert all files)
f5a63a5506d2 regressed performance of baseset.__sub__ by introducing
a lazyset. This patch restores that lost performance by eagerly
evaluating baseset.__sub__ if the other set is a baseset.
revsetbenchmark.py results impacted by this change:
revset #6: roots(0::tip)
0) wall 2.923473 comb 2.920000 user 2.920000 sys 0.000000 (best of 4)
1) wall 0.077614 comb 0.080000 user 0.080000 sys 0.000000 (best of 100)
revset #23: roots((0:tip)::)
0) wall 2.875178 comb 2.880000 user 2.880000 sys 0.000000 (best of 4)
1) wall 0.154519 comb 0.150000 user 0.150000 sys 0.000000 (best of 61)
On the author's machine, this slowdown manifested during evaluation of
'roots(%ln::)' in phases.retractboundary after unbundling the Firefox
repository. Using `time hg unbundle firefox.hg` as a benchmark:
Before: 8:00
After: 4:28
Delta: -3:32
For reference, the subset and cs baseset instances impacted by this
change were of lengths 193634 and 193627, respectively.
Explicit test coverage of roots(%ln::), while similar to the existing
roots(0::tip) benchmark, has been added.
Setting substate to None was an oversight in 5b3c9729fe09 and this patch
corrects it by setting substate to an empty dictionary which matches what
subrepo code expects.
Before this patch, largefiles gotten from revisions other than the
parent of the working directory at "hg revert" become "clean"
unexpectedly in steps below:
1. "repo.status()" is invoked (for status check before reverting)
1-1 "dirstate" entry for standinfile SF is "normal"-ed
(1-2 "lfdirstate" entry of largefile LF (for SF) is "normal"-ed)
2. "cmdutil.revert()" is invoked
2-1 standinfile SF is updated in the working directory
2-2 "dirstate" entry for SF is NOT updated
3. "lfcommands.updatelfiles()" is invoked (by "overrides.overriderevert()")
3-1 largefile LF (for SF) is updated in the working directory
3-2 "dirstate" returns "n" and valid timestamp for SF (by 1-1 and 2-2)
3-3 "lfdirstate" entry for LF is "normal"-ed
3-4 "lfdirstate" is written into ".hg/largefiles/dirstate", and
timestamp of LF is stored into "lfdirstate" file (by 3-3)
(ASSUMPTION: timestamp of LF differs from one of "lfdirstate" file)
Then, "hs status" treats LF as "clean", even though LF is updated by
"other" revision (by 3-1), because "lfilesrepo.status()" always treats
"normal"-ed files (by 3-3 and 3-4) as "clean".
When largefiles are reverted, they should be "normallookup"-ed
forcibly.
This patch uses "normallookup" on "lfdirstate" while reverting, by
passing "True" to newly added argument "normallookup".
Forcible "normallookup"-ing is not so expensive, because list of
target largefiles is explicitly specified in this case.
This patch uses "[debug] dirstate.delaywrite" feature in the test, to
ensure that timestamp of the largefile gotten from "other" revision is
stored into ".hg/largefiles/dirstate" (for ASSUMPTION at 3-4)
Before this patch, largefiles gotten from "other" revision (with
conflict) at "hg merge" become "clean" unexpectedly in steps below:
1. "repo.status()" is invoked (for status check before merging)
1-1 "dirstate" entry for standinfile SF is "normal"-ed
1-2 "lfdirstate" entry of largefile LF (for SF) is "normal"-ed
2. "merge.update()" is invoked
2-1 SF is updated in the working directory
(ASSUMPTION: user choice "other" at conflict)
2-2 "dirstate" entry for SF is "merge"-ed
3. "lfcommands.updatelfiles()" is invoked (by "overrides.hgmerge()")
3-1 largefile LF (for SF) is updated in the working directory
3-2 "dirstate" returns "m" for SF (by 2-2)
3-3 "lfdirstate" entry for LF is left as it is
3-4 "lfdirstate" is written into ".hg/largefiles/dirstate", and
timestamp of LF is stored into "lfdirstate" file (by 1-2)
(ASSUMPTION: timestamp of LF differs from one of "lfdirstate" file)
Then, "hs status" treats LF as "clean", even though LF is updated by
"other" revision (by 3-1), because "lfilesrepo.status()" always treats
"normal"-ed files (by 1-2 and 3-4) as "clean".
When state of standinfile in "dirstate" is "m", largefile should be
"normallookup"-ed.
This patch invokes "normallookup" on "lfdirstate" for merged files.
This patch uses "[debug] dirstate.delaywrite" feature in the test, to
ensure that timestamp of the largefile gotten from "other" revision is
stored into ".hg/largefiles/dirstate". (for ASSUMPTION at 3-4)
Before this patch, largefiles gotten from "other" revision (without
conflict) at "hg merge" become "clean" unexpectedly in steps below:
1. "merge.update()" is invoked
1-1 standinfile SF is updated in the working directory
1-2 "dirstate" entry for SF is "normallookup"-ed
2. "lfcommands.updatelfiles()" is invoked (by "overrides.hgmerge()")
2-1 largefile LF (for SF) is updated in the working directory
2-2 "dirstate" returns "n" for SF (by 1-2)
2-3 "lfdirstate" entry for LF is "normal"-ed
2-4 "lfdirstate" is written into ".hg/largefiles/dirstate", and
timestamp of LF is stored into "lfdirstate" file
(ASSUMPTION: timestamp of LF differs from one of "lfdirstate" file)
Then, "hs status" treats LF as "clean", even though LF is updated by
"other" revision (by 2-1), because "lfilesrepo.status()" always treats
"normal"-ed files (by 2-3 and 2-4) as "clean".
When timestamp is not set (= negative value) for standinfile in
"dirstate", largefile should be "normallookup"-ed regardless of
rebasing or not, because "n" state in "dirstate" doesn't ensure
"clean"-ness of a standinfile at that time.
This patch uses "normallookup" instead of "normal", if "mtime" of
standin is unset
This is a temporary way to fix with less changes. For fundamental
resolution of this kind of problems in the future, "lfdirstate" should
be updated with "dirstate" simultaneously while "merge.update"
execution: maybe by hooking "recordupdates"
It is also why this patch (temporarily) uses internal field "_map" of
"dirstate" directly.
This patch uses "[debug] dirstate.delaywrite" feature in the test, to
ensure that timestamp of the largefile gotten from "other" revision is
stored into ".hg/largefiles/dirstate". (for ASSUMPTION at 2-4)
This patch newly adds "test-largefiles-update.t", to avoid increasing
cost to run other tests for largefiles by subsequent patches
(especially, "[debug] dirstate.delaywrite" causes so).
Even though "dirstate.write()" is invoked explicitly after "normal"
invocations, timestamp field of entries may be still "unset" in the
"dirstate" file itself , because "pack_dirstate" drops it when it is
equal to the timestamp of "dirstate" file itself.
This can avoid overlooking modification of files, which are updated at
same time in the second. But on the other hand, this may hide timing
critical problems.
For example, incorrect "normal"-ing (or lack of "normallookup"-ing on
the already "normal"-ed entry) is visible only when:
- the target file is modified in the working directory at T1, and
- "dirstate" file is written out at T2 (!= T1)
Otherwise, T1 is dropped by "pack_dirstate" in "dirstate.write()"
invocation, and "unset" is stored into "dirstate" file.
It often fails to reproduce problems from incorrect "normal"-ing by
Mercurial testset, because automated actions in the small repository
almost always causes that T1 and T2 are same.
This patch adds the debug feature to delay writing out to ensure
timestamp of each entries explicitly.
This feature is used to make timing critical "dirstate" problems
reproducable in subsequent patches.
This previously died in _revdescendants() taking the min() of the first set to
only(), when it was empty. An empty second set already worked. Likewise,
descendants() already handled an empty set.
This patch makes commit message shown in text editor customizable by
template. For example, this can advertise:
- sample commit messages for routine works,
- points to call attention before commit,
- message of the day, and so on
To show commit message correctly even in problematic encoding, this
patch chooses the latter below:
- replace "buildcommittext" with "buildcommittemplate" completely
- invoke "buildcommittemplate" only if '[committemplate] changeset'
is configured explicitly
For example, if multibyte character ending with backslash (0x5c) is
followed by ASCII character 'n' in the customized template, sequence
of backslash and 'n' is treated as line-feed unexpectedly (and
multibyte character is broken, too).
This corruption occurs in 'decode("string-escape")' while parsing
template string.
Add a new internal:tagmerge merge tool which implements an automatic merge
algorithm for mercurial's tag files
The tagmerge algorithm is able to resolve most merge conflicts that
currently would trigger a .hgtags merge conflict. The only case that
it does not (and cannot) handle is that in which two tags point to
different revisions on each merge parent _and_ their corresponding tag
histories have the same rank (i.e. the same length). In all other
cases the merge algorithm will choose the revision belonging to the
parent with the highest ranked tag history. The merged tag history is
the combination of both tag histories (special care is taken to try to
combine common tag histories where possible).
The algorithm also handles cases in which tags have been manually
removed from the .hgtags file and other similar corner cases.
In addition to actually merging the tags from two parents, taking into
account the base, the algorithm also tries to minimize the difference
between the merged tag file and the first parent's tag file (i.e. it
tries to make the merged tag order as as similar as possible to the
first parent's tag file order).
The algorithm works as follows:
1. read the tags from p1, p2 and the base
- when reading the p1 tags, also get the line numbers associated to each
tag node (these will be used to sort the merged tags in a way that
minimizes the diff to p1). Ignore the file numbers when reading p2 and
the base
2. recover the "lost tags" (i.e. those that are found in the base but not on p1
or p2) and add them back to p1 and/or p2
- at this point the only tags that are on p1 but not on p2 are those new
tags that were introduced in p1. Same thing for the tags that are on p2
but not on p2
3. take all tags that are only on p1 or only on p2 (but not on the base)
- Note that these are the tags that were introduced between base and p1 and
between base and p2, possibly on separate clones
4. for each tag found both on p1 and p2 perform the following merge algorithm:
- the tags conflict if their tag "histories" have the same "rank" (i.e.
length) _AND_ the last (current) tag is _NOT_ the same
- for non conflicting tags:
- choose which are the high and the low ranking nodes
- the high ranking list of nodes is the one that is longer.
In case of draw favor p1
- the merged node list is made of 3 parts:
- first the nodes that are common to the beginning of both the
low and the high ranking nodes
- second the non common low ranking nodes
- finally the non common high ranking nodes (with the last one
being the merged tag node)
- note that this is equivalent to putting the whole low ranking node
list first, followed by the non common high ranking nodes
- note that during the merge we keep the "node line numbers", which will
be used when writing the merged tags to the tag file
5. write the merged tags taking into account to their positions in the first
parent (i.e. try to keep the relative ordering of the nodes that come
from p1). This minimizes the diff between the merged and the p1 tag files
This is done by using the following algorithm
- group the nodes for a given tag that must be written next to each other
- A: nodes that come from consecutive lines on p1
- B: nodes that come from p2 (i.e. whose associated line number is None)
and are next to one of the a nodes in A
- each group is associated with a line number coming from p1
- generate a "tag block" for each of the groups
- a tag block is a set of consecutive "node tag" lines belonging to the
same tag and which will be written next to each other on the merged
tags file
- sort the "tag blocks" according to their associated number line
- put blocks whose nodes come all from p2 first
- write the tag blocks in the sorted order
Notes:
- A few tests have been added to test-tag.t. These tests are very specific to
the new internal:tagmerge tool, so perhaps they should be moved to their own
test file.
- The merge algorithm was discussed in a thread on the mercurial mailing list.
In http://markmail.org/message/anqaxldup4tmgyrx a slightly different algorithm
was suggested. In it the p1 and p2 tags would have been interleaved instead of
put one before the other. It would be possible to implement that but my tests
suggest that the merge result would be more confusing and harder to understand.
As extensively detailed by Pierre-Yves[1], simplemerge's minimal
markers can result in hopeless confusion for many common merges. As it
happens, we accidentally inherited this behavior when we borrowed
simplemerge from bzr; it is not the behavior used by RCS's merge(1),
Since merge(1) (and not bzr) is what we aim to emulate when emulating
RCS's merge markers, we simply turn this feature off. This brings us
in line with the behavior of CVS, SVN, and Git as a bonus.
(NB: using conflict markers with Mercurial is discouraged.)
[1] http://markmail.org/message/wj5mh3lc46czlvld
convert glob tessa
We are going to introduce a setting to control the "minimisation" feature of
``internal:merge``. So we need more interesting conflicting content. We change
the content in an independent changeset to make sure the coming code change
leave the output unchanged.
Before this patch, 'detailed' is used as the default of '[ui]
mergemarkers'. This embeds non-ASCII characters in tags, branches,
bookmarks, author and/or commit descriptions into merged files in the
encoding specified by '--encoding' global option, 'HGENCODING' or
other locale setting environment variables.
But, if files to be merged use another encoding, this behavior breaks
consistency of encoding in merged files.
For example, ISO-2022-JP or EUC-JP are sometimes used as the file
encoding for Japanese characters, because of historical and/or
environmental reasons, even though UTF-8 or Shift-JIS are ordinarily
used as the terminal encoding.
This can't be resolved automatically, because Mercurial doesn't aware
encoding of managed files.
This patch uses 'basic' as the default of '[ui] mergemarkers' to avoid
embedding encoding sensitive characters for safety.
This patch puts '[ui] mergemarkers = detailed' into default hgrc file
for tests, to reduce changes for tests in this patch.
Previously, the directory '.hg/largefiles' would always be created if it didn't
exist when the lfdirstate was opened. If there were no standin files, no
dirstate file would be created in the directory. The end result was that
enabling the largefiles extension globally, but not explicitly adding a
largefile would result in the repository eventually sprouting this directory.
Creation of this directory effectively changes readonly operations like summary
and status into operations that require write access. Without write access,
commands that would succeed without the extension loaded would abort with a
surprising error when the extension is loaded, but not actively used:
$ hg sum -R /tmp/thg --config extensions.largefiles=
parent: 16541:00dc703d5aed
repowidget: specify incoming bundle by plain file path to avoid url parsing
branch: default
abort: Permission denied: '/tmp/thg/.hg/largefiles'
This change is simpler than changing the callers of openlfdirstate() to use the
'create' parameter that was introduced in 74522122b97d, and probably how that
should have been implemented in the first place.
For a pathological .hgignore with over 2500 glob lines and over 200000 calls to
re.escape, and with re2 available, this speeds up parsing the .hgignore from
0.75 seconds to 0.20 seconds. This causes e.g. 'hg status' with hgwatchman
enabled to go from 1.02 seconds to 0.47 seconds.
The escape method in at least one of the modules called 're2' is in C. This
means it is significantly faster than the Python code written in 're'.
An upcoming patch will have benchmarks.
Instead of explicitly calling a few function to generate part in the bundle, we
now have a list of all part generators. This should make it easier for
extensions to adds new part in the bundle.
This new way to extend the push deprecates the old `_pushbundle2extraparts` way.
When bundle2 push includes more than just changesets, we may have no
changegroup to push yet still have other data to push.
So we now try to performs a bundle2 push in all cases. The check for changegroup
inclusion is moved into the ``_pushb2ctx`` function in charge of creating the
changegroup part.
The bundle2 part is aborted if no actual payload part have been added to the
bundle2.
This attribute will record what steps were performed during the bundle2 push.
This will control whenever the old way push must be performed or skipped. This
will ultimately be used by changegroup, phases, obsmarkers, bookmarks and any
other kind of data ones may want to exchange even when bundle2 support is
missing.
This property can be used to know how much parts have been added to the bundle2.
This will be useful to check if any part have been generated for a push.
We extract the creation of changegroup related parts into its own function.
This precludes the inclusion of more diverse data during the bundle2 push.
We use a closure to carry the logic that need to be perform when processing the
server reply.
This is the first step of a refactoring that will ease the inclusion of new part
in the bundle2 push and includes more information (like phases) in this push
We need to move the function a bit sooner to be able to group the generation of
`b2x:check:heads` and `b2x:changegroup` part in an external function. We move it
sooner to preserve parts creation order bundle2 tests rely on. At the ends of this
refactoring the `_pushbundle2extraparts` will be replaced by another mechanism
anyway.
'subrepos' template keyword newly added by this patch shows updated
subrepositories.
For the compatibility with the list of subrepositories shown in the
editor at commit:
- 'subrepos' is empty, at revisions removing '.hgsub' itself
- 'subrepos' is calculated between the revision and the first parent
of it, at merge revisions
To avoid silent regression, this patch also confirms "hg diff" of
".hgsubstate" and parents for each target revisions in the test.
Before this patch, complicated template expression below is required
to show current active bookmark if it is associated with the
changeset.
"{bookmarks % '{ifeq(bookmark, current, \"{bookmark}\")}'}"
This patch add 'currentbookmark' keyword to show current bookmark
easily.
On a repository with over 250,000 files and 700,000 commits, this improves
cases like
hg status --rev <rev> -- <file> # rev is not .
from 2.1 seconds to 1.4 seconds.
There is further scope for improvement here: for a single file or a small set
of files, it is probably more efficient to use filelog linkrevs when possible.
However there will always be cases where that will fail (multiple commits
pointing to the same file revision, removed files...), so this is independently
useful.
The existing _readtags function has been modified a little and renamed
_readtaghist. A new _readtaghist function has been added, which is a wrappger
around _readtaghist. Its output is the same as the old _readtaghist.
The purpose of this change is to make it possible to automatically merge tag
files. In order to do so we will need to get the line numbers for each of the
tag-node pairs on the first merge parent.
This is not used yet, but will be used on a follow up patch that will introduce
an automatic tag merge algorithm.
I performed some tests to compare the effect of this change. I used timeit to
run the test-tags.t test a 9 times with and without this patch. The results
were:
- without this patch: 3 loops, best of 3: 8.55 sec per loop
- with this patch: 3 loops, best of 3: 8.49 sec per loop
The the test was on average was slightly faster with this patch (although the
difference was probably not statistically significant).
Before this patch, "close()" for the file object opened in
"_initrepo()" may not be executed, if unexpected exception is raised,
because it isn't executed in "finally" clause.
This patch ensures "close()" execution at the end of "_initrepo()" by
moving it into "finally" clause.
This patch puts configuration lines into "lines" array and write them
out at once, to narrow the scope of "try"/"finally" for review-ability.
This patch doesn't use "vfs.write()", because:
- current "vfs.write()" implementation doesn't take "mode" argument
to open file in "text" mode
- writing hgrc file out in binary mode may break backward compatibility
This test is added for changes in the subsequent patch.
This test doesn't use "(glob)" for expected output, because "[paths]"
is configured at subrepo creation by "_abssource()" using
"posixpath.join()" to join path components.
Before this patch, "close()" for the file object opened in
"_cachestorehash()" may not be executed, if unexpected exception is
raised, because it isn't executed in "finally" clause.
This patch ensures "close()" execution at the end of
"_cachestorehash()" by moving it into "finally" clause.
