Although Python supports `X = Y if COND else Z`, this was only
introduced in Python 2.5. Since we have to support Python 2.4, it was
a very common thing to write instead `X = COND and Y or Z`, which is a
bit obscure at a glance. It requires some intricate knowledge of
Python to understand how to parse these one-liners.
We change instead all of these one-liners to 4-liners. This was
executed with the following perlism:
find -name "*.py" -exec perl -pi -e 's,(\s*)([\.\w]+) = \(?(\S+)\s+and\s+(\S*)\)?\s+or\s+(\S*)$,$1if $3:\n$1 $2 = $4\n$1else:\n$1 $2 = $5,' {} \;
I tweaked the following cases from the automatic Perl output:
prev = (parents and parents[0]) or nullid
port = (use_ssl and 443 or 80)
cwd = (pats and repo.getcwd()) or ''
rename = fctx and webutil.renamelink(fctx) or []
ctx = fctx and fctx or ctx
self.base = (mapfile and os.path.dirname(mapfile)) or ''
I also added some newlines wherever they seemd appropriate for readability
There are probably a few ersatz ternary operators still in the code
somewhere, lurking away from the power of a simple regex.
The next patch will enable verification by using the system's CA store if
possible, which means we would have to distinguish None (=use default) from
'' (=--insecure). This smells bug-prone and provides no way to override
web.cacerts to forcibly use the system's store by --config argument.
This patch changes the meaning of web.cacerts as follows:
value behavior
------- ---------------------------------------
None/'' use default
'!' never use CA certs (set by --insecure)
<path> verify by the specified CA certificates
Values other than <path> are for internal use and therefore undocumented.
0e5f75a52c9d introduced a way to share bookmarks. When a repository share that
shares bookmarks was created, a .hg/bookmarks.shared file was created to mark
the repository share as one that shares its bookmarks.
We have plans to introduce other levels of sharing, including a "full share"
mode. Rather than creating a new ".shared" file for each new thing that we may
want to share It seems better to create a single "shared" file that will list
what is shared for a given shared repository. This should make it much easier
to get a list of everything that is shared by a given shared repository.
The shared file contains a list of shared "items" (such as bookmarks). Each
shared "item" is added as a new line in the file. For now the only possible
entry in the file is "bookmarks".
This change touches every module in which repository.opener was being used, and
changes it for the equivalent repository.vfs. This is meant to make it easier
to split the repository.vfs into several separate vfs.
It should now be possible to remove localrepo.opener.
This patch adds the -B/--bookmarks option to the share command added by the
share extension. All it does for now is create a marker, 'bookmarks.shared',
that will be used by future code to implement the sharing functionality.
This just copies the same local sample hgrc, except it sets the
default path to the repo it was cloned from.
This is cut-and-paste from the local sample hgrc, but I think it's
acceptable, since the two pieces of code are right next to each other
and they're small. There is danger of them going out of synch, but it
would complicate the code too much to get rid of this C&P.
I also add ui as an import to hg.py, but with demandimport, this
should not be a noticeable performance hit.
We need to explicitly push all local bookmarks when doing the clone from a local
repo to a remote one through ssh. This will let us remove the manual export of
bookmarks in clone and rely on the official exchange in push and pull instead.
Now that the standard pull function includes bookmarks, we need to ensure that
a copy clone also copies the bookmarks. This will let us drop the manual bookmark
pulling done independently during a clone.
Some users clone from a server before ever running 'hg config --edit',
so they don't see our helpful template for things like enabling the
username. Attempt to give them some helpful guidance.
Local clones copy/hardlink over files directly, so the branchcaches should all
be valid. There's a slight chance that a read operation would update one of the
branchcaches, but we hold a lock over the source repo so they shouldn't cause
an invalid branchcache to be copied over, just a different, valid one.
This patch uses destvfs with base as .hg directory in shared destination
repository to update filesystem function with vfs. Some methods are changed to
use vfs functions with destvfs.
branch 'default' HG: bookmark '@' HG: changed mercurial/hg.py
In this patch, dstwvfs is added to use vfs functions in working directory of
destination shared repository. Existing filesystem operations are updated
to use vfs functions through dstwvfs.
Add custom conflict markers 'working copy' and 'destination' for doing hg update
when there are conflicts between your working copy and the destination.
This patch introduces "outgoinghooks" to avoid redundant outgoing
check for "hg outgoing" in other than "commands.outgoing" (or utility
functions used by it).
This patch makes "_outgoing()" return peer object for remote
repository, to avoid re-execution "expandpath()", "parseurl()", and
"peer()" on caller side for specified URL.
This patch makes "_outgoing()" return empty list instead of "None", if
there are no outgoing changesets, because:
- returning "None" requires callers to examine whether returned
value is "None" or not explicitly, if callers want to execute loop
on returned value, but
- there are no explicit needs to return "None"
Before this patch, "contrib/check-code.py" can't detect these
problems, because the regexp pattern to detect "% inside _()" doesn't
suppose the case that the format string and "%" aren't placed in the
same line.
This patch replaces "\s" in that regexp pattern with "[ \t\n]" to
detect "% inside _()" problems in such case.
"[\s\n]" can't be used in this purpose, because "\s" is automatically
replaced with "[ \t]" by "_preparepats()" and "\s" in "[]" causes
nested "[]" unexpectedly.
Since changeset a8955c4d9ef5, "reposetup()" of each extensions is
invoked only on repositories enabling corresponded extensions.
This causes that largefiles specific interactions between the
repository enabling largefiles locally and remote (wire) peer fail,
because there is no way to know whether largefiles is enabled on the
remote repository behind the wire peer, and largefiles specific
"wireproto functions" are not given to any wire peers.
To avoid this problem, largefiles should be enabled in wider scope
than each repositories (e.g. user-wide "${HOME}/.hgrc").
This patch introduces "wirepeersetupfuncs" to setup wire peer by
extensions already enabled. Functions registered into
"wirepeersetupfuncs" are invoked for all wire peers.
This patch uses plain list instead of "util.hooks" for
"wirepeersetupfuncs", because the former allows to control order of
function invocation by order of extension enabling: it may be useful
for workaround of problems with combination of enabled extensions
This should correct an earlier couple of bad merges (5433856b2558 and
596960a4ad0d, now pruned) that accidentally brought in a change that had
been marked obsolete (244ac996a821).
Changset 39a4d61c40d6 rewriting "hg.copystore()" with vfs uses
'dstbase + "/lock"' instead of "os.path.join()", because target files
given from "store.copyfiles()" already uses "/" as path separator
But in the repository using revlog format 0, "dstbase" becomes empty
("data" directory is located under ".hg" directly), and 'dstbase +
"/lock"' is treated as "/lock": in almost all cases, write access to
"/lock" causes "permission denied".
This patch uses "os.path.join()" to join path components which may be
empty in "hg.copystore()".
If source URL has no path, default destination is resolved as '.'. It is
surprising than useful, and perhaps an unexpected behavior.
This change does not solve issue3880, but can avoid to clone into current
directory by accident.
Some extensions set configuration settings that showed up in 'hg showconfig
--debug' with 'none' as source. That was confusing.
Instead, they will now tell which extension they come from.
This change tries to be consistent and specify a source everywhere - also where
it perhaps is less relevant.
This patch makes "lock.lock.__init__()" take both vfs and lock file
path relative to vfs, instead of absolute path to lock file.
This allows lock file to be accessed via vfs.
This patch rewrites "copystore()" with vfs, because succeeding patch
requires "lock.lock()" invocation with vfs.
This patch uses 'dstbase + "/lock"' instead of "join()" with both
elements even on Windows environment but it should be reasonable,
because target files given from "store.copyfiles()" already uses "/"
as path separator.
"util.copyfiles()" between two vfs-s may have to be rewritten in the
future.
Before this patch, "extensions.extensions()" always lists up all
loaded extensions. So, commands handling multiple repositories at a
time like below enable extensions unexpectedly.
- clone from or push to localhost: extensions enabled only in the
source are enabled also in the destination
- pull from localhost: extensions enabled only in the destination
are enabled also in the source
- recursive execution in subrepo tree: extensions enabled only in
the parent or some of siblings in the tree are enabled also in
others
In addition to it, extensions disabled locally may be enabled
unexpectedly.
This patch checks whether each of extensions should be listed up or
not, if "ui" is specified to "extensions.extensions()", and invokes
"reposetup()" of each extensions only for repositories enabling it.
unionrepo is just like bundlerepo without bundles.
The implementation is very similar to bundlerepo, but I don't see any obvious
way to generalize it.
Some most obvious use cases for this would be log and diff across local repos,
as a kind of preview of pulls, for instance:
$ hg -R union:repo1+repo2 heads
$ hg -R union:repo1+repo2 log -r REPO1REV -r REPO2REV
$ hg -R union:repo1+repo2 log -r '::REPO1REV-::REPO2REV'
$ hg -R union:repo1+repo2 log -r 'ancestor(REPO1REV,REPO2REV)'
$ hg -R union:repo1+repo2 diff -r REPO1REV -r REPO2REV
This is going to be used in RhodeCode, and Bitbucket already uses something
similar. Having a core implementation would be beneficial.
79f69be29aed introduced a crash when cloning a url without path - where
util.url().path would be None.
This None will now be handled as ''. clone will thus abort with 'repository /
not found' as before.
Locating the share source when no default path is available is now handled in
subrepo._abssource(), so unconditionally setting a default path (and the
associated problems) can be avoided.
The test change reflects the fact that a default path is no longer set on the
resulting share.
We noa pass an unfiltered repo in the same way `localrepo.push` does. This does
not alter outgoing behavior and prevents possible crash with computing
common/missing.
The `findcommonincoming` code could be simplified to make this unnecessary, but
this is too much change for the freeze.
Now that changelog filtering is in place, it's become evident that
naming the filters according to the set of revs _not_ included in the
filtered changelog is confusing. This is especially evident in the
collaborative branch cache scheme.
This changes the names of the filters to reflect the revs that _are_
included:
hidden -> visible
unserved -> served
mutable -> immutable
impactable -> base
repoview.filteredrevs is renamed to filterrevs, so that callers read a
bit more sensibly, e.g.:
filterrevs('visible') # filter revs according to what's visible
