0cc5c10d5dc7 was not the final version of that patch. It was really slow
because `l not in repo.changelog` iterates revisions up to `l`. Instead,
rev() should utilize spanset.__contains__().
revset #0: rev(210000)
0) wall 0.000039 comb 0.000000 user 0.000000 sys 0.000000 (best of 67978)
1) wall 0.002721 comb 0.000000 user 0.000000 sys 0.000000 (best of 1055)
2) wall 0.000059 comb 0.000000 user 0.000000 sys 0.000000 (best of 45599)
(0: 3.2-rc, 1: 0cc5c10d5dc7, 2: this patch)
Note that the benchmark result described in 0cc5c10d5dc7 is wrong because
it is the one of the initial version.
'n' was introduced in Mercurial in 5d1adb6683fa and broke Python 2.4 support in
mysterious ways that only showed failure in test-glog.t. Py_BuildValue failed
because of the unknown format and a TypeError was thrown ... but it never
showed up on the Python side and it happily continued processing with wrong
data.
Quoting https://docs.python.org/2/c-api/arg.html :
n (integer) [Py_ssize_t]
Convert a Python integer or long integer to a C Py_ssize_t.
New in version 2.5.
k (integer) [unsigned long]
Convert a Python integer or long integer to a C unsigned long without
overflow checking.
This will use unsigned long instead of Py_ssize_t. That is not a good solution,
but good is not an option when we have to support Python 2.4.
The old revset had pretty terrible performance on large repositories (12+
seconds). This new revset achieves the same result in only 0.7s. As we improve
the underlying revset APIs we can probably get this revset down to 'only(base,
dest)::', but at the moment that version still takes 2s.
This addresses the bug described in issue4405: when obsolescence markers are
enabled, amending a commit with a file move can lead to the copy information
being lost.
However, the bug is more general and can be reproduced without obsmarkers as
well, as demonstracted by Pierre-Yves and put into the updated test.
Specifically, graph topology divergences between the filelogs and the changelog
can cause copy information to be lost during amends.
In light of the POODLE[0] attack on SSLv3, let's just drop the ability to
use anything older than TLSv1 entirely.
This only fixes the client side. Another commit will fix the server
side. There are still a few SSLv[23] constants hiding in httpclient,
but I'll fix those separately upstream and import them when we're not
in a code freeze.
0: http://googleonlinesecurity.blogspot.com/2014/10/this-poodle-bites-exploiting-ssl-30.html
If an exception is raised during a bundle2 part payload generation it is now
recorded in the bundle. If such exception occurs, we capture it, transmit an
abort exception through the bundle, cleanly close the current part payload and
raise it again. This allow to generate valid bundle even in case of exception so
that the consumer does not wait forever for a dead producer. This also allow to
raise the exception during unbundling at the exact point it happened during
bundling make debugging easier.
It is now possible to emit a single part in the middle of a payload production.
This part will be processed with limitation (only access to a `ui` object). The
goal is to let the server raise exception and output while a part is being
processed. The source motivation is to transmit exception that occurs while
generating a part.
This change is was the motivation to bump the bundle2 format from HG2X to HG2Y.
Somehow, the format bump made it into 3.2 without it. So this change go on
stable. It is low risk as bundle2 is still disabled by default.
Previously the journal.backupfiles file was delimited by \0. Now we delimit it
using \n (same as the journal file). This allows us to change the number of
values in each line more easily, rather than relying on the count of \0's.
The transaction format will be changing a bit over the next releases, so let's
go ahead and add a version number to make backwards compatibility easier. This
whole file format was broken prior to 3.2 (see previous patch), so changing it
now is pretty low risk.
The transaction backupfiles logic was broken for 'hg recover'. The file format
is XXX\0XXX\0YYY\0YYY\0 but the parser did a couple things wrong. 1) It went one
step beyond the final \0 and tried to read past the end of the array. 2)
array[i:i+1] returns a single item, instead of two items as intended.
Added a test to catch it, which turns out to be the first actual 'hg recover'
test.
The recent optimization of "and" operation relies on the assumption that
the rhs set does not contain invalid revisions. So rev() has to remove
invalid revisions.
This is still faster than using `.filter(lambda r: r == l)`.
revset #0: rev(25)
0) wall 0.026341 comb 0.020000 user 0.020000 sys 0.000000 (best of 113)
1) wall 0.000038 comb 0.000000 user 0.000000 sys 0.000000 (best of 66567)
2) wall 0.000062 comb 0.000000 user 0.000000 sys 0.000000 (best of 43699)
(0: 428fa22fb2d1^, 1: 3.2-rc, 2: this patch)
Before this patch, "test-context.py" fails on Windows environment,
because "diff" output contains unexpected "\r" character.
Opening the target file in text mode causes this automatic end-of-line
conversion.
Changeset d735f8a82023 introduced "showing prompt choice if input is
not a tty but is forced to be interactive" and adjusted expected
output in test-record.t.
But some tests for no-execbit platform (= Windows) were not adjusted
by d735f8a82023.
This causes unexpected failure of test-record on Windows environment.
This patch adds below to prompt lines for such tests:
- prompt choice at the end of prompt line, and
- empty line after prompt line
The problem in commandserver was addressed by 766cfbe766dc, but it is tricky
to reuse ui.nontty option to disable echo back. Instead, this patch introduces
new option to enable echoing of prompt response.
Prompt echoing is changed to be off by default, which should avoid possible
breakage of output parsing in user scripts.
For now, this option is undocumented because it exists for internal use.
Hooks that run after the transaction need to be able to touch the
repository. So we need to run them after the lock release. This is
similar to what the "changegroup" hook is doing in the
`addchangegroup` function.
Hidden changesets are by far the most common error case and is the only one[1]
that can reach the user. We move to a friendlier message with a hint about how
to access the data anyway. We should probably point to a help topic instead but
we do not have such a topic yet.
Example of the new output
abort: hidden revision '4'!
(use --hidden to access hidden revisions)
[1] Actually, filtering from "served" can also reach the user during certain
exchange operations.
This will help user to debug. A more precise message will be issued
for the most common case ("visible" filter) in the next changesets.
example output:
- abort: filtered revision '4'!
+ abort: filtered revision '4' (not in 'visible' subset)!
The hack for using certificate store in addition to the provided CAs resides in
Apple's OpenSSL. Apple's own Pythons will use it, but other custom built
Pythons might use a custom built OpenSSL without that hack and will fail when
exposed to the dummy cacert introduced in ee8b7fe5e119.
There do not seem to be a simple way to check from Python if we are using a
patched OpenSSL or if it is an Apple OpenSSL.
Instead, check if the Python executable resides in /usr/bin/python* or in
/System/Library/Frameworks/Python.framework/ and assume that all Pythons found
there will be native Pythons using the patched OpenSSL.
Custom built Pythons will not get the benefit of using the CAs from the
certificate store.
The 'status --rev' code is not very well tested, which has bitten us
as recently as in issue4321. Let's add some more tests, some of which
uncover bugs. Remove the few existing tests that are now covered in a
more thorough and consistent way.
Because unix-mode server forks child process per connection, client does not
know the pid of the server that will handle requests. The pid is necessary
to interrupt hung process:
1. client connects to socket server
2. server accepts the connection, forks, and tells pid
3. client requests "runcommand pull"
.. hung ..
4. client sends SIGINT to the (forked) server
5. server returns from I/O wait
Note that getsockopt(SO_PEERCRED) of Linux cannot be used because the server
fork()s after accept().
Consider a hypothetical bug in the release function that causes it to raise an
exception. Also consider the bisect command, which saves its state in a finally
clause. Saving the state requires acquiring the wlock.
If we don't unlink the lockfile when the exception is thrown, we'll try to
acquire the wlock again. We're going to try and acquire a lock again while our
old lockfile is on disk. The PID on disk is our own, and of course we're still
running, so we won't take over the lock. Hence we'll be stuck waiting for a
lock that we left behind ourselves.
To avoid this, always unlink the lockfile. This preserves the invariant that
self.held > 0 is equivalent to the lockfile existing on disk.