It seems like the old behaviour with different handling for commands with and
without path was intended, but I think this behaviour of util.find_exe is
better:
* Always returns existing file
* or None if command not found - no default
* Windows: Returned file thus always ends with extension from PATHEXT
This fixes http://www.selenic.com/mercurial/bts/issue1459. The change might
fix other unintended behaviour too.
On Mac OS X, several top-level directories are actually symlinks into
/private. When setting up HGTMP, expand the symlinks so that later
comparisons to or substituations with the actual path work as expected.
All heads of branches will be stored in a new cache file 'branchheads.cache'
within the .hg directory. The old 'branch.cache' file from older versions
will be ignored.
The new cache contents are formatted line-by-line as '{node} {branchtag}\n'.
This is the same as the previous format. Now, every head is recorded in
an oldest -> tipmost order.
The localrepo.branchheads function is reworked to use the data from the cache.
- simplify version detection code
- move detection code into setup.py
- move version reading function into util.py
- drop version.py code
This makes hg more closely follow its own recommendation of how to deal with
versioning your builds: use hg id in your build script.
Copy information was saved in a common loop, then refined in a git-only block.
The problem was the latter did filter out renames occuring in the current
patch and irrelevant to commit. In the non-git case, copy records still existed
in the dirstate, referencing removed files, making the commit to fail. Git and
non-git copy handling paths are now separated for simplicity.
Reported by Gary Bernhardt
The issue came from the 63f9ab8034d1 fix for issue586 working only for
manifest.add() fast path, where the incorrect removed file set was
ignored. This path was no longer taken after 5958346d119e refactoring.
This extension produces quite a lot of informational messages during
its normal operation and it is hard to say which strings can be
changed and which cannot.
The hgweb fix in dc83349025f7 aimed at restoring the "back" link in hgweb's
filelog that has been lost in 81d0ede3de31. However, the previous version of
this test ran the filelog command on a file with only a single filelog entry.
In this case, the previous hgweb version did not exhibit the bug. The error
condition is now correctly tested with a filelog of 2 entries.
Changes docstrings to begin with a lowercase word. Only docstrings
used in help output is changed.
Scripts are not expected to grep the output of 'hg help' so this
change should pose no problem with regard to the compatibility rules.
As reported in issue 1445:
A valid candidate revision for a bisect test is not considered for testing
due to its skipped ancestor. If this revision is the only untested one left
an assertion error occurs.
Implemented as two functions: diffstat, which yields lines of text,
formatted as a usual diffstat output, and diffstatdata, which is called
inside diffstat to do real performing and yield file names with
appropriate data (numbers of added and removed lines).
collections: direct child repos only
paths *: direct child repos only (like collections)
paths **: recursive discovery
When ** is used, the mq repository (if any) is also shown.
Windows won't create directories with names ending in period or space, so
we encode the last period/space character in directory names of non-hashed
paths in the store using reversible ~xx encoding (' ' -> '~20', '.' -> '~2e').
With this change it is possible to remove a directory ending in period or space
that was inadvertantly checked in on a linux system while still being able
to clone such a repository with its full history to Windows (see also issue793).
Windows won't create directories with names ending in period or space, so
we replace the last period/space character in truncated directory names of
hashed paths with some other character (underbar).
This change is brain damaged, there is no reason the copyfrom revision of the
project items may have any relevance when deciding the revision parent. It is
meaningful only when fetching files content.
Incorrect converted graph was spotted in pyglet svn repository at:
------------------------------------------------------------------------
r274 | r1chardj0n3s | 2006-12-21 02:02:14 +0100 (Jeu, 21 Dec 2006) | 2 lines
Changed paths:
A /branches/richard-glx-version (from /trunk:269)
M /branches/richard-glx-version/pyglet/window/xlib/__init__.py
R /branches/richard-glx-version/tests/test.py (from /trunk/tests/test.py:270)
R /branches/richard-glx-version/tools/info.py (from /trunk/tools/info.py:272)
R /branches/richard-glx-version/website/get_involved.php (from /trunk/website/get_involved.php:273)
Branching to horribly mangle GLX
On AIX /etc/profile sets LOGNAME read only. This causes test-acl to
fail when it comes to set LOGNAME in do_push().
Work around this by using env to set LOGNAME and run the command.
This feature somehow duplicates [collections] but it is simpler to use and has
less issues under Windows where using absolute path as configuration file key
is not supported.
Suggested by Dirkjan Ochtman <dirkjan@ochtman.nl>
For different reasons these tests will fail if run in a tmpdir which is in a hg
repo.
The following three tests assumes no .hg in path dirs - I don't know how to
work around that:
* test-dispatch explicitly tests for no repo and expects "abort: There is no
Mercurial repository here (.hg not found)!"
* test-extension expects parentui to be None when not cd'ed to a repo dir
* test-globalopts tests that implicit -R works correctly - that could perhaps be
done from another repo instead of assuming no repo
The following two might be worth investigating further:
* test-convert-svn-sink fails for unknown reasons, starting with "abort:
unresolved merge conflicts (see hg resolve)"
* test-glog gets strange failures when testing "from outer space"
hgweb tests often failed on my system because the serve port wasn't free when a
new hgweb was started; the killed hg wasn't completely dead yet.
Now we use killdaemons which waits for the process to die.
Due to the fix to the pull race, to avoid sending unnecessary
changesets, use changegroupsubset if possible.
This will increase the load on the server.
hg export -o outfile 1 2 3 4 had the same effect as hg -o outfile 4
This was caused by opening with 'w' instead of 'a'. This only occurs when
the filename pattern resulted in ambiguous patch filenames.
Using the changectx might result in a lookup error during the strip command.
Thefore we use the current dirstate to get the parents of the working directory.
When a manifest has a series of directories with nothing in them but a single
directory, displaying the entire chain of empty directories allows for
navigation down to the first non-empty directory with a single click.
Because Java links package hierarchy to directory hierarchy, and because Java
conventions include at least three empty directories at the top of this
hierarchy, descending down empty directories is very common in Java web tools.
When a file is deleted via hg rm <file> the dirstate marks the file with a
status of 'r'. The physical file has been deleted, but the inotify server
tries to do a stat on the file after it's been removed.
Patch catches the exception and correctly call updatestatus()
changegroup() has a problem when nodes which does not descend from a node
in <bases> are added to remote after the discovery phase.
If that happens, changegroup() won't send the correct set of nodes, ie.
some nodes will be missing.
To correct it we have to find the set of nodes that both remote and self
have (called <common>), and send all the nodes not in <common>.
This fix has some overhead, in the worst case it will re-send a whole branch.
A proper fix to avoid this overhead might be to change the protocol so that
the <common> nodes are sent (instead of the <bases> of the missing nodes).
* adds a new entry 'fncache' to '.hg/requires' for new repos
* writes new file '.hg/store/fncache'
* hash-encodes filenames with long paths (issue839)
* encodes Windows reserved filenames (issue793)
In 'hg', we now show a short list of commands, including extension commands.
In 'hg help', we show core commands, a list of enabled extensions, and topics.
pmezard expects
hg qref -s -X b
to apply the -X to the list of files in the patch, and thus remove b from the
patch.
That's how it worked before c302ef4372b2. That change seemed sensible, but it
wasn't...
mpm says
(17:22:30) pmezard_: kiilerix1: do you mean that -X should be forbidden with -s ?
(17:22:54) pmezard_: kiilerix1: and --include too
(17:23:03) mpm: No because you should be able to say hg qref -s foo* -X foo-bar
so mpm expects
hg qref -s -X b *
to apply the -X to the list of files in the working directory, and thus don't
include b in the patch
This patch tries to make both usecases work by creating a matchfn which uses
the include/excludes but not the filelist.
Some SUSE version don't like --home, they fail with:
"error: must supply either home or prefix/exec-prefix -- not both"
this is due to SUSE shipping a distutils.cfg conflicting with --home.
If we can't create the unix socket because the path is too long
we create the socket in a temporary directory and symlink it into
the repo.
Fix issue1208
The "real" way to test this is to mount a non-symlink-capable filesystem, and
try working on it; however, I don't know how to mount filesystems as a
non-priveleged user from within the testing framework. So instead, os.symlink
is overridden to raise the exception that would be raised on such a filesystem.
If we copy a file followed by an update, it's possible for the parent
manifest to no longer contain the source file of the copy, which could cause
commit to fail. If this happens, we search backwares from the first
parent to find the most likely original revision.
