We plan on creating the source database dynamically, in the test setup.
This means that (a) we cannot assume that the metadata database and the
source database are the same, and (b) we need to drop and re-add the
source in code, not in YAML.
This changeset prepares the code for the introduction of a separate
source database, but doesn't go there yet. The separation is already
done but is too big to review in one go, so I have split this out.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5508
GitOrigin-RevId: b497a83ac4a100371762c2515c87ee3760d8d4ab
This splits two naming convention tests into four classes (and four YAML
files), which might seem overkill, but allows us to provision sources
declaratively in the future. As each class will require a custom source
configuration, we are able to annotate them accordingly, which means the
test cases are decoupled from the source database URL, letting us
generate a new database for each test case and automatically add it as a
source to HGE.
The future changes are already prepared, but this has been extracted out
as it splits the YAML files, which is a large change best reviewed in
isolation.
The test case `test_type_and_field_names` has been split into:
* `TestNamingConventionsTypeAndFieldNamesGraphqlDefault`
* `TestNamingConventionsTypeAndFieldNamesHasuraDefault`
The test case `test_type_and_field_names_with_prefix_and_suffix` has
been split into:
* `TestNamingConventionsTypeAndFieldNamesGraphqlDefaultWithPrefixAndSuffix`
* `TestNamingConventionsTypeAndFieldNamesHasuraDefaultWithPrefixAndSuffix`
The YAML files have been split in the same way. This was fairly trivial
as each test case would add a source, run some tests with
the `graphql_default` naming convention, drop the source, and then
repeat for the `hasura_default` naming convention. I simply split the
file in two. There is a little bit of duplication for provisioning the
various database tables, which I think is worth it.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5496
GitOrigin-RevId: 94825e755c427a5414230f69985b534991b3aad6
This means that if `remote_schemas/nodejs/package.json` changes, the
dependencies will be automatically reinstalled.
It also moves `package-lock.json` to the correct location (in the
directory in which we run `npm install`), and updates it.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5481
GitOrigin-RevId: f3fb431afd19de150f39ec2e4cb6572b896c870f
Making it easier to inject different ones later.
I also included a change to _.prettierignore_ so Visual Studio Code doesn't keep trying to reformat the JavaScript or YAML files in `server/tests-py`, as it can cause diffs to balloon for no obvious benefit.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5456
GitOrigin-RevId: bc6d548708160a328e1e61a00e19be8e124da025
Let's put it in one place.
This is a precursor to moving database provisioning into the Python
integration tests.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5453
GitOrigin-RevId: 5920b0b1177d94496485fcb4e178b946534ee4eb
I'm trying to shore up the Python integration tests to make them more reliable. In doing so, I noticed this.
---
Rather than hard-coding hostnames and ports, we can (and already do) inject these into the HGE process using environment variables.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5255
GitOrigin-RevId: 6bb593999ece42cedef6619f31f9d9b2e39f30ef
When documenting how adding a backend works, the information was a bit
out of date. Updated to link to files from the latest commit to `main`,
at the time of writing.
Also runs the README through the `prettier` autoformatter.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5301
GitOrigin-RevId: df54f95d85156e9f95a4a7788eed93c6359cc81c
For some reason these functions exist in `Backends.Postgres.SQL.Value`.
We don't want to depend on that module here.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5292
GitOrigin-RevId: a09bd3cdb0caf08938bce0728a8d281344c1d4ce
I'm trying to shore up the Python integration tests to make them more reliable. In doing so, I noticed this.
---
It feels a lot more sensible as we never run on more than one backend at a time.
This also removes the `check_file_exists` parameter from the setup functions; it never worked. It was always set to the result of a comparison between a backend name and a function, which was always `False`. Enabling it breaks things.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5254
GitOrigin-RevId: 8718ab21527c2ba0a7205d1c01ebaac1a10be844
Rather than a homebrewed approach, we can use `make` to figure out when
it's necessary to regenerate our venv.
This Makefile will regenerate _requirements.txt_ from
_requirements-top-level.txt_ when the latter is changed.
It will also regenerate the venv when _requirements.txt_ is changed
(i.e. changes are pulled, or it's regenerated as described above).
`make` uses file/directory timestamps to figure out what to rebuild.
This is probably more reliable than expecting people to update a version
number whenever they change a file.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5152
GitOrigin-RevId: 24b27d49bf6c4ba1d57ac38ea38ae278216c6d66
I tried re-freezing _server/tests-py/requirements-top-level.txt_
recently, and discovered that it caused the tests to fail.
This pins a couple of dependencies so that we can safely re-freeze.
Specifically:
- `cryptography` is pinned at v3.*
- `graphene` is pinned at v2.*
- `PyJWT` is pinned at v2.3.*
- `websocket-client` is pinned at v0.56.0 (this was done in
_requirements.txt_ already, but that file is supposed to be
regenerated)
Upgrading `SQLAlchemy` required changing PostgreSQL URLs to use
"postgresql://" as the URL scheme, not "postgres://".
Updating `ruamel.yaml` caused a few tests to fail as we are passing
`ruamel.yaml.scalarstring.LiteralScalarString` values as header values.
This is fixed by explicitly converting header values to strings.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5120
GitOrigin-RevId: 9c12a3013c3d1f23dddbe781037663838b23f6f5
This introduces an `ErrorMessage` newtype which wraps `Text` in a manner which is designed to be easy to construct, and difficult to deconstruct.
It provides functionality similar to `Data.Text.Extended`, but designed _only_ for error messages. Error messages are constructed through `fromString`, concatenation, or the `toErrorValue` function, which is designed to be overridden for all meaningful domain types that might show up in an error message. Notably, there are not and should never be instances of `ToErrorValue` for `String`, `Text`, `Int`, etc. This is so that we correctly represent the value in a way that is specific to its type. For example, all `Name` values (from the _graphql-parser-hs_ library) are single-quoted now; no exceptions.
I have mostly had to add `instance ToErrorValue` for various backend types (and also add newtypes where necessary). Some of these are not strictly necessary for this changeset, as I had bigger aspirations when I started. These aspirations have been tempered by trying and failing twice.
As such, in this changeset, I have started by introducing this type to the `parseError` and `parseErrorWith` functions. In the future, I would like to extend this to the `QErr` record and the various `throwError` functions, but this is a much larger task and should probably be done in stages.
For now, `toErrorMessage` and `fromErrorMessage` are provided for conversion to and from `Text`, but the intent is to stop exporting these once all error messages are converted to the new type.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/5018
GitOrigin-RevId: 84b37e238992e4312255a87ca44f41af65e2d89a
We have a lot of `assert st_code == 200` scattered about. This is a
problem because (a) it makes the code harder to parse and (b) the error
message is lacking; I have seen a few flaky tests which were impossible
to diagnose because I didn't know what the response _should_ be.
This reduces the number of places in which we perform this assertion
(moving most of them to `HGECtx.execute_query`), so that we can have a
better chance of seeing a useful error message on test failure.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4957
GitOrigin-RevId: 3ff388bccf49f96569aa6b7db85266a0c5ee27ea
This makes it easier to run the tests when `cd`-ing into the directory,
and also takes care of cleaning up the environment when you exit the
directory.
It also helps editors with direnv support find the relevant libraries
so that they can perform more helpful analysis.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4963
GitOrigin-RevId: d253c054c09c1bf7017ade9f7af414b56ee26fe0
This improves `parseJSONPath` and `encodeJSONPath` to encode special characters appropriately by delegating to Aeson.
This also makes a couple of improvements to `encodeJSONPath`.
1. The function is moved from `Hasura.Base.Error` to `Data.Parser.JSONPath`. This still doesn't seem too appropriate but it is somewhat better. I am basing this on the fact that its test cases already lived in `Data.Parser.JSONPathSpec`.
2. It now returns `Text`, not `String`.
4. It quotes strings with double quotes (`"`) rather than single quotes (`'`), just like JSON.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4935
GitOrigin-RevId: bf44353cd740500245f2e38907a7d6263ae0291c
I found a couple of flaws in `TestNamingConventions` and friends:
1. We had two test cases with the same name, which means one of them
would be overwritten. Renamed to avoid conflict.
2. The `skipif` check for
`TestNamingConventionWithoutExperimentalFeature` seemed broken. I
have fixed it by making it line up with its `reason`, and extracted
some logic out into a function to avoid duplication.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4958
GitOrigin-RevId: f572d86c893135839dbaba70bf89984bc9d79331
### Description
This PR rewrites OpenAPI to be more idiomatic. Some noteworthy changes:
- we accumulate all required information during the Analyze phase, to avoid having to do a single lookup in the schema cache during the OpenAPI generation phase (we now only need the schema cache as input to run the analysis)
- we no longer build intermediary endpoint information and aggregate it, we directly build the the `PathItem` for each endpoint; additionally, that means we no longer have to assume that different methods have the same metadata
- we no longer have to first declare types, then craft references: we do everything in one step
- we now properly deal with nullability by treating "typeName" and "typeName!" as different
- we add a bunch of additional fields in the generated "schema", such as title
- we do now support enum values in both input and output positions
- checking whether the request body is required is now performed on the fly rather than by introspecting the generated schema
- the methods in the file are sorted by topic
### Controversial point
However, this PR creates some additional complexity, that we might not want to keep. The main complexity is _knot-tying_: to avoid lookups when generating the OpenAPI, it builds an actual graph of input types, which means that we need something similar to (but simpler than) `MonadSchema`, to avoid infinite recursions when analyzing the input types of a query. To do this, this PR introduces `CircularT`, a lesser `SchemaT` that aims at avoiding ever having to reinvent this particular wheel ever again.
### Remaining work
- [x] fix existing tests (they are all failing due to some of the schema changes)
- [ ] add tests to cover the new features:
- [x] tests for `CircularT`
- [ ] tests for enums in output schemas
- [x] extract / document `CircularT` if we wish to keep it
- [x] add more comments to `OpenAPI`
- [x] have a second look at `buildVariableSchema`
- [x] fix all missing diagnostics in `Analyze`
- [x] add a Changelog entry?
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4654
Co-authored-by: David Overton <7734777+dmoverton@users.noreply.github.com>
GitOrigin-RevId: f4a9191f22dfcc1dccefd6a52f5c586b6ad17172
…fix #5426"
This reverts commit f85742318167d1e51f463c45fcd00f26269c2555.
## Description ✍️
With this commit there is the possiblity that you could get conflicting
type definitions with remote schemas. Reverting for now as we determine
a solution. At which point we will add this back in.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4879
Co-authored-by: Gil Mizrahi <8547573+soupi@users.noreply.github.com>
GitOrigin-RevId: 932b4a9226717c826d4bde7e375695354cee8c0c
The code that builds the GraphQL schema, and `buildGQLContext` in particular, is partial: not every value of `(ServerConfigCtx, GraphQLQueryType, SourceCache, HashMap RemoteSchemaName (RemoteSchemaCtx, MetadataObject), ActionCache, AnnotatedCustomTypes)` results in a valid GraphQL schema. When it fails, we want to be able to return better error messages than we currently do.
The key thing that is missing is a way to trace back GraphQL type information to their origin from the Hasura metadata. Currently, we have a number of correctness checks of our GraphQL schema. But these correctness checks only have access to pure GraphQL type information, and hence can only report errors in terms of that. Possibly the worst is the "conflicting definitions" error, which, in practice, can only be debugged by Hasura engineers. This is terrible DX for customers.
This PR allows us to print better error messages, by adding a field to the `Definition` type that traces the GraphQL type to its origin in the metadata. So the idea is simple: just add `MetadataObjId`, or `Maybe` that, or some other sum type of that, to `Definition`.
However, we want to avoid having to import a `Hasura.RQL` module from `Hasura.GraphQL.Parser`. So we instead define this additional field of `Definition` through a new type parameter, which is threaded through in `Hasura.GraphQL.Parser`. We then define type synonyms in `Hasura.GraphQL.Schema.Parser` that fill in this type parameter, so that it is not visible for the majority of the codebase.
The idea of associating metadata information to `Definition`s really comes to fruition when combined with hasura/graphql-engine-mono#4517. Their combination would allow us to use the API of fatal errors (just like the current `MonadError QErr`) to report _inconsistencies_ in the metadata. Such inconsistencies are then _automatically_ ignored. So no ad-hoc decisions need to be made on how to cut out inconsistent metadata from the GraphQL schema. This will allow us to report much better errors, as well as improve the likelihood of a successful HGE startup.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4770
Co-authored-by: Samir Talwar <47582+SamirTalwar@users.noreply.github.com>
GitOrigin-RevId: 728402b0cae83ae8e83463a826ceeb609001acae
When pytest rewrites assertions to make them more useful, it also
truncates long assertion messages in the middle, often obscuring the
actual error.
Disabling this allows us to see the full message, which should hopefully
allow us to see the actual error.
In order to support this, we need to make sure that custom assertion
messages include the actual assertion information, as this will no
longer be rendered by pytest.
PR-URL: https://github.com/hasura/graphql-engine-mono/pull/4835
GitOrigin-RevId: de6839a3b40d0edc7cb96e46625eebca0aaf0c95
