* use max_line_width + 1 during softwrap to account for newline char
Helix softwrap implementation always wraps lines so that the newline
character doesn't get cut off so he line wraps one chars earlier then
in other editors. This is necessary, because newline chars are always
selecatble in helix and must never be hidden.
However That means that `max_line_width` currently wraps one char
earlier than expected. The typical definition of line width does not
include the newline character and other helix commands like `:reflow`
also don't count the newline character here.
This commit makes softwrap use `max_line_width + 1` instead of
`max_line_width` to correct the impedance missmatch.
* fix typos
Co-authored-by: Jonathan Lebon <jonathan@jlebon.com>
* Add text-width to config.toml
* text-width: update setting documentation
* rename leftover config item
* remove leftover max-line-length occurrences
* Make `text-width` optional in editor config
When it was only used for `:reflow` it made sense to have a default
value set to `80`, but now that soft-wrapping uses this setting, keeping
a default set to `80` would make soft-wrapping behave more aggressively.
* Allow softwrapping to ignore `text-width`
Softwrapping wraps by default to the viewport width or a configured
`text-width` (whichever's smaller). In some cases we only want to set
`text-width` to use for hard-wrapping and let longer lines flow if they
have enough space. This setting allows that.
* Revert "Make `text-width` optional in editor config"
This reverts commit b247d526d69adf41434b6fd9c4983369c785aa22.
* soft-wrap: allow per-language overrides
* Update book/src/configuration.md
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
* Update book/src/languages.md
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
* Update book/src/configuration.md
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
---------
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
Co-authored-by: Jonathan Lebon <jonathan@jlebon.com>
Co-authored-by: Alex Boehm <alexb@ozrunways.com>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Doc string fix
Delete duplicate `the`
* selection.rs doc string wording
* Remove extra whitespace at end of doc text
---------
Co-authored-by: Ivan Tham <pickfire@riseup.net>
Open a new document `test.rs` and type the following:
`di//<esc><C-c>`
The margin calculation pushes the range out of bounds for the comment
marker when there are no characters (newline) after it.
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value:
Char range out of bounds: char range 0..3,
Rope/RopeSlice char length 2', ropey-1.6.0/src/rope.rs:546:37
The debug build catches the error in the transaction: thread 'main'
panicked at 'attempt to subtract with overflow',
helix-core/src/transaction.rs:503:26
* Make `m` textobject look for pairs enclosing selections
Right now, this textobject only looks for pairs that surround the
cursor. This ensures that the pair found encloses each selection, which
is likely to be intuitively what is expected of this textobject.
* Simplification of match code
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Adjust logic for ensuring surround range encloses selection
Prior, it was missing the case where the start of the selection came
before the opening brace. We also had an off-by-one error where if the
end of the selection was on the closing brace it would not work.
* Refactor to search for the open pair specifically to avoid edge cases
* Adjust wording of autoinfo to reflect new functionality
* Implement tests for surround functionality in new integration style
* Fix handling of skip values
* Fix out of bounds error
* Add `ma` version of tests
* Fix formatting of tests
* Reduce indentation levels for readability, and update comments
* Preserve each selection's direction with enclosing pair surround
* Add test case for multiple cursors resulting in overlap
* Mark known failures as TODO
* Make tests multi-threaded or they fail
* Cargo fmt
* Fix typos in integration test comments
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* properly handle LSP position encoding
* add debug assertion to Transaction::change
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The loop always iterates the number of times the user specified even
if the beginning/end of the document is reached.
For an extreme demonstration try the following commands, Helix will
hang for several seconds.
100000000w
100000000]c
If the last argument to shellwords ends in a multibyte utf8 character
the entire argument will be dropped.
e.g. `:sh echo test1 test2𒀀` will only output `test1`
Add additional tests based on the code review feedback
The purpose of this change is to remove the mutable self borrow on
`HighlightIterLayer::sort_key` so that we can sort layers with the
correct ordering using the `Vec::sort` function family.
`HighlightIterLayer::sort_key` needs `&mut self` since it calls
`Peekable::peek` which needs `&mut self`. `Vec::sort` functions
only give immutable borrows of the elements to ensure the
correctness of the sort.
We could instead approach this by creating an eager Peekable and using
that instead of `std::iter::Peekable` to wrap `QueryCaptures`:
```rust
struct EagerPeekable<I: Iterator> {
iter: I,
peeked: Option<I::Item>,
}
impl<I: Iterator> EagerPeekable<I> {
fn new(mut iter: I) -> Self {
let peeked = iter.next();
Self { iter, peeked }
}
fn peek(&self) -> Option<&I::Item> {
self.peeked.as_ref()
}
}
impl<I: Iterator> Iterator for EagerPeekable<I> {
type Item = I::Item;
fn next(&mut self) -> Option<Self::Item> {
std::mem::replace(&mut self.peeked, self.iter.next())
}
}
```
This would be a cleaner approach (notice how `EagerPeekable::peek`
takes `&self` rather than `&mut self`), however this doesn't work in
practice because the Items emitted by the `tree_sitter::QueryCaptures`
Iterator must be consumed before the next Item is returned.
`Iterator::next` on `tree_sitter::QueryCaptures` modifies the
`QueryMatch` returned by the last call of `next`. This behavior is
not currently reflected in the lifetimes/structure of `QueryCaptures`.
This fixes an issue with layers being out of order when using combined
injections since the old code only checked the first range in the
layer. Layers being out of order could cause missing highlights for
combined-injections content.
* rework positioning/rendering, enables softwrap/virtual text
This commit is a large rework of the core text positioning and
rendering code in helix to remove the assumption that on-screen
columns/lines correspond to text columns/lines.
A generic `DocFormatter` is introduced that positions graphemes on
and is used both for rendering and for movements/scrolling.
Both virtual text support (inline, grapheme overlay and multi-line)
and a capable softwrap implementation is included.
fix picker highlight
cleanup doc formatter, use word bondaries for wrapping
make visual vertical movement a seperate commnad
estimate line gutter width to improve performance
cache cursor position
cleanup and optimize doc formatter
cleanup documentation
fix typos
Co-authored-by: Daniel Hines <d4hines@gmail.com>
update documentation
fix panic in last_visual_line funciton
improve soft-wrap documentation
add extend_visual_line_up/down commands
fix non-visual vertical movement
streamline virtual text highlighting, add softwrap indicator
fix cursor position if softwrap is disabled
improve documentation of text_annotations module
avoid crashes if view anchor is out of bounds
fix: consider horizontal offset when traslation char_idx -> vpos
improve default configuration
fix: mixed up horizontal and vertical offset
reset view position after config reload
apply suggestions from review
disabled softwrap for very small screens to avoid endless spin
fix wrap_indicator setting
fix bar cursor disappearring on the EOF character
add keybinding for linewise vertical movement
fix: inconsistent gutter highlights
improve virtual text API
make scope idx lookup more ergonomic
allow overlapping overlays
correctly track char_pos for virtual text
adjust configuration
deprecate old position fucntions
fix infinite loop in highlight lookup
fix gutter style
fix formatting
document max-line-width interaction with softwrap
change wrap-indicator example to use empty string
fix: rare panic when view is in invalid state (bis)
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* improve documentation for positoning functions
* simplify tests
* fix documentation of Grapheme::width
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* add explicit drop invocation
* Add explicit MoveFn type alias
* add docuntation to Editor::cursor_cache
* fix a few typos
* explain use of allow(deprecated)
* make gj and gk extend in select mode
* remove unneded debug and TODO
* mark tab_width_at #[inline]
* add fast-path to move_vertically_visual in case softwrap is disabled
* rename first_line to first_visual_line
* simplify duplicate if/else
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
`toml::from_slice` has been removed. The CHANGELOG recommends using
`toml::from_str` instead and doing the byte-to-str conversion yourself.
The `toml::toml!` macro has also changed to return the type of the
value declared within the macro body. In the change in
`helix-view/src/theme.rs` this is a `toml::map::Map` (it was a
`toml::Value` previously) allowing us to skip the match and use the
map directly.
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
increment/decrement (C-a/C-x) had some buggy behavior where selections
could be offset incorrectly or the editor could panic with some edits
that changed the number of characters in a number or date. These stemmed
from the automatic jumping behavior which attempted to find the next
date or integer to increment. The jumping behavior also complicated the
code quite a bit and made the behavior somewhat difficult to predict
when using many cursors.
This change removes the automatic jumping behavior and only increments
or decrements when the full text in a range of a selection is a number
or date. This simplifies the code and fixes the panics and buggy
behaviors from changing the number of characters.
* Add a undo/redo split test case for crossing branches
* history: Switch up/down transaction chaining order
The old code tends to work in practice because, usually, either up_txns
or down_txns are empty. When both have contents though, we can run into
a panic trying to compose them all since they will disagree on the
length of the text. This fixes the panic test case in the parent
commit.
* Show (git) diff signs in gutter (#3890)
Avoid string allocation when git diffing
Incrementally diff using changesets
refactor diffs to be provider indepndent and improve git implementation
remove dependency on zlib-ng
switch to asynchronus diffing with similar
Update helix-vcs/Cargo.toml
fix toml formatting
Co-authored-by: Ivan Tham <pickfire@riseup.net>
fix typo in documentation
use ropey reexpors from helix-core
fix crash when creating new file
remove useless use if io::Cursor
fix spelling mistakes
implement suggested improvement to repository loading
improve git test isolation
remove lefover comments
Co-authored-by: univerz <univerz@fu-solution.com>
fixed spelling mistake
minor cosmetic changes
fix: set self.differ to None if decoding the diff_base fails
fixup formatting
Co-authored-by: Ivan Tham <pickfire@riseup.net>
reload diff_base when file is reloaded from disk
switch to imara-diff
Fixup formatting
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Redraw buffer whenever a diff is updated.
Only store hunks instead of changes for individual lines to easily allow
jumping between them
Update to latest gitoxide version
Change default diff gutter position
Only update gutter after timeout
* update diff gutter synchronously, with a timeout
* Apply suggestions from code review
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* address review comments and ensure lock is always aquired
* remove configuration for redraw timeout
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The 'revisions' field on History can't be treated as linear: each
Revision in the revisions Vec has a parent link and an optional child
link. We can follow those to unroll the recent history.
When using undo/redo, the history revision can be decremented. In that
case we should apply the inversions since the given revision in
History::changes_since. This prevents panics with jumplist operations
when a session uses undo/redo to move the jumplist selection outside
of the document.
* Add a test case for updating jumplists across windows
* Apply transactions to all views on history changes
This ensures that jumplist selections follow changes in documents, even
when there are multiple views (for example a split where both windows
edit the same document).
* Leave TODOs for cleaning up View::apply
* Use Iterator::reduce to compose history transactions
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* significantly improve treesitter performance while editing large files
* Apply stylistic suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* use PartialEq and Hash instead of a freestanding function
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The current `:tree-sitter-subtree` has a bug for field-names when the
field name belongs to an unnamed child node. Take this ruby example:
def self.method_name
true
end
The subtree given by tree-sitter-cli is:
(singleton_method [2, 0] - [4, 3]
object: (self [2, 4] - [2, 8])
name: (identifier [2, 9] - [2, 20])
body: (body_statement [3, 2] - [3, 6]
(true [3, 2] - [3, 6])))
But the `:tree-sitter-subtree` output was
(singleton_method
object: (self)
body: (identifier)
(body_statement (true)))
The `singleton_method` rule defines the `name` and `body` fields in an
unnamed helper rule `_method_rest` and the old implementation of
`pretty_print_tree_impl` would pass the `field_name` down from the
named `singleton_method` node.
To fix it we switch to the [TreeCursor] API which is recommended by
the tree-sitter docs for traversing the tree. `TreeCursor::field_name`
accurately determines the field name for the current cursor position
even when the node is unnamed.
[TreeCursor]: https://docs.rs/tree-sitter/0.20.9/tree_sitter/struct.TreeCursor.html
This fixes an edge case for completing shellwords. With a file
"a b.txt" in the current directory, the sequence `:open a\<tab>`
will result in the prompt containing `:open aa\ b.txt`. This is
because the length of the input which is trimmed when replacing with
completion is calculated on the part of the input which is parsed by
shellwords and then escaped (in a separate operation), which is lossy.
In this case it loses the trailing backslash.
The fix provided here refactors shellwords to track both the _words_
(shellwords with quotes and escapes resolved) and the _parts_ (chunks
of the input which turned into each word, with separating whitespace
removed). When calculating how much of the input to delete when
replacing with the completion item, we now use the length of the last
part.
This also allows us to eliminate the duplicate work done in the
`ends_with_whitespace` check.
* add tree sitter match limit to avoid slowdowns for larger files
Affects all tree sitter queries and should speedup both
syntax highlighting and text object queries.
This has been shown to fix significant slowdowns with textobjects
for rust files as small as 3k loc.
* Apply suggestions from code review
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
`deepest_preceding` is known to be a descendant of `node`. Repeated
calls of `Node::parent` _should_ eventually turn `deepest_preceding`
into `node`, but when the node is errored (the tree contains a syntax
error), `Node::parent` returns None.
In the typescript case:
if(true) &&true
// ^ press enter here
The tree is:
(program [0, 0] - [1, 0]
(if_statement [0, 0] - [0, 15]
condition: (parenthesized_expression [0, 2] - [0, 8]
(true [0, 3] - [0, 7]))
consequence: (expression_statement [0, 8] - [0, 15]
(binary_expression [0, 8] - [0, 15]
left: (identifier [0, 8] - [0, 8])
right: (true [0, 11] - [0, 15])))))
`node` is the `program` node and `deepest_preceding` is the
`binary_expression`. The tree is errored on the `binary_expression`
node with `(MISSING identifier [0, 8] - [0, 8])`.
In the C++ case:
; <<
// press enter after the ';'
The tree is:
(translation_unit [0, 0] - [1, 0]
(expression_statement [0, 0] - [0, 1])
(ERROR [0, 1] - [0, 4]
(identifier [0, 1] - [0, 1])))
`node` is the `translation_unit` and `deepest_preceding` is the `ERROR`
node.
In both cases, `Node::parent` on the errored node returns None.
This changes the completion items to be rendered with shellword
escaping, so a file `a b.txt` is rendered as `a\ b.txt` which matches
how it should be inputted.
8584b38cfb switched to shellwords for
completion in command-mode. This changes the conditions for choosing
whether to complete the command or use the command's completer.
This change processes the input as shellwords up-front and uses
shellword logic about whitespace to determine whether the command
or argument should be completed.
The change in d801a6693c to search for
suffixes in `file-types` is too permissive: files like the tutor or
`*.txt` files are now mistakenly interpreted as R or perl,
respectively.
This change changes the syntax for specifying a file-types entry that
matches by suffix:
```toml
file-types = [{ suffix = ".git/config" }]
```
And changes the file-type detection to first search for any non-suffix
patterns and then search for suffixes only with the file-types entries
marked explicitly as suffixes.
Just like for grammars we currently force a lower-case of the name for
some actions (like filesystem lookup). To make this consistent and less
surprising for users, we remove this lower-casing here.
Note: it is still the preferred way to name both language and grammar in
lower-case
Signed-off-by: Christian Speich <cspeich@emlix.com>
* Fix shellwords delimiter handling
This allows commands such as `:set statusline.center ["file-type"]` to
work. Before the quotes within the list would mess it up.
Also added a test to ensure correct behavior
* Rename Delimiter -> OnWhitespace
* Fix test::print for Unicode
The print function was not generating correct translations when
the input has Unicode (non-ASCII) in it. This is due to its use of
String::len, which gives the length in bytes, not chars.
* Fix multi-code point auto pairs
The current code for auto pairs is counting offsets by summing the
length of the open and closing chars with char::len_utf8. Unfortunately,
this gives back bytes, and the offset needs to be in chars.
Additionally, it was discovered that there was a preexisting bug where
the selection was not computed correctly in the case that the cursor
was:
1. a single grapheme in width
2. this grapheme was more than one char
3. the direction of the cursor is backwards
4. a secondary range
In this case, the offset was not being added into the anchor. This was
fixed.
* migrate auto pairs tests to integration
* review comments
* feat(syntax): add strategy to associate file to language through pattern
File path will match if it ends with any of the file types provided in the config.
Also used this feature to add support for the .git/config and .ssh/config files
* Add /etc/ssh/ssh_config to languages.toml
* cargo xtask docgen
* Update languages.md
* Update languages.md
* Update book/src/languages.md
Co-authored-by: Ivan Tham <pickfire@riseup.net>
* Update book/src/languages.md
Co-authored-by: Ivan Tham <pickfire@riseup.net>
Co-authored-by: Ivan Tham <pickfire@riseup.net>
Info logs don't show up in the log file by default, but this line
should: failures to load tree-sitter parser objects are useful errors.
A parser might fail to load it is misconfigured
(https://github.com/helix-editor/helix/pull/4303#discussion_r996448543)
or if the file does not exist.
This changes the behavior of operations like `]f`/`[f` to set the
direction of the new range to the direction of the action.
The original behavior was to always use the head of the next function.
This is inconsistent with the behavior of goto_next_paragraph and makes
it impossible to create extend variants of the textobject motions.
This causes a behavior change when there are nested functions. The
behavior in the parent commit is that repeated uses of `]f` will
select every function in the file even if nested. With this commit,
functions are skipped.
It's notable that it's possible to emulate the original behavior by
using the `ensure_selections_forward` (A-:) command between invocations
of `]f`.
* Split helix_core::find_root and helix_loader::find_local_config_dirs
The documentation of find_root described the following priority for
detecting a project root:
- Top-most folder containing a root marker in current git repository
- Git repository root if no marker detected
- Top-most folder containing a root marker if not git repository detected
- Current working directory as fallback
The commit contained in https://github.com/helix-editor/helix/pull/1249
extracted and changed the implementation of find_root in find_root_impl,
actually reversing its result order (since that is the order that made
sense for the local configuration merge, from innermost to outermost
ancestors).
Since the two uses of find_root_impl have different requirements (and
it's not a matter of reversing the order of results since, e.g., the top
repository dir should be used by find_root only if there's not marker in
other dirs), this PR splits the two implementations in two different
specialized functions.
In doing so, find_root_impl is removed and the implementation is moved
back in find_root, moving it closer to the documented behaviour thus
making it easier to verify it's actually correct
* helix-core: remove Option from find_root return type
It always returns some result, so Option is not needed
* Update description of `m` textobject to its actual functionality
Sometime recently the functionality of `m` was changed to match the
nearest pair to the cursor, rather than the former functionality of
matching the pair only if the cursor was on one of the brace characters
directly.
* Rename surround methods to reflect that they work on pairs
The current naming suggests that they may work generally on any
textobject, whereas their implementation really focuses on pairs.
* Change description of m textobject to match actual functionality
The current implementation of `m` no longer merely looks at the pair
character the cursor is on, but actually will search for the pair
(defined in helix-core/src/surround.rs) that encloses the cursor, and
not the entire selection.
* Accept suggested wording change
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Prefix pair surround for consistency
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Fix nondeterministic highlighting
This is done by prefering matches in the begining, ie for
`keyword.function`, `keyword` is a better match than `function`.
* Use all positions and not just leftmost
Fixes possible edgecase with something like `function.method.builtin`
and the queries `function.builtin` and `function.method`
* Switch to bitmask for slightly better performance
* Make matches from the start of string
Also change comments to match new behaviour
* Change default formatter for any language
* Fix clippy error
* Close stdin for Stdio formatters
* Better indentation and pattern matching
* Return Result<Option<...>> for fn format instead of Option
* Remove unwrap for stdin
* Handle FormatterErrors instead of Result<Option<...>>
* Use Transaction instead of LspFormatting
* Use Transaction directly in Document::format
* Perform stdin type formatting asynchronously
* Rename formatter.type values to kebab-case
* Debug format for displaying io::ErrorKind (msrv fix)
* Solve conflict?
* Use only stdio type formatters
* Remove FormatterType enum
* Remove old comment
* Check if the formatter exited correctly
* Add formatter configuration to the book
* Avoid allocations when writing to stdin and formatting errors
* Remove unused import
Co-authored-by: Gokul Soumya <gokulps15@gmail.com>
* Add workspace and document diagnostics picker
fixes#1891
* Fix some of @archseer's annotations
* Add From<&Spans> impl for String
* More descriptive parameter names.
* Adding From<Cow<str>> impls for Span and Spans
* Add new keymap entries to docs
* Avoid some clones
* Fix api change
* Update helix-term/src/application.rs
Co-authored-by: Bjorn Ove Hay Andersen <bjrnove@gmail.com>
* Fix a clippy hint
* Sort diagnostics first by URL and then by severity.
* Sort diagnostics first by URL and then by severity.
* Ignore missing lsp severity entries
* Add truncated filepath
* Typo
* Strip cwd from paths and use url-path without schema
* Make tests a doctest
* Better variable names
Co-authored-by: Falco Hirschenberger <falco.hirschenberger@itwm.fraunhofer.de>
Co-authored-by: Bjorn Ove Hay Andersen <bjrnove@gmail.com>
* feat: make `move_vertically` aware of tabs and wide characters
* refactor: replace unnecessary checked_sub with comparison
* refactor: leave pos_at_coords unchanged and introduce separate pos_at_visual_coords
* style: include comment to explain `pos_at_visual_coords` breaking condition
* refactor: use `pos_at_visual_coords` in `text_pos_at_screen_coords`
* feat: make `copy_selection_on_line` aware of wide characters
When a new View of a Document is created, a default cursor of 0, 0 is
created, and it does not get normalized to a single width cursor until
at least one movement of the cursor happens. This appears to have no
practical negative effect that I could find, but it makes tests difficult
to work with, since the initial selection is not what you expect it to be.
This changes the initial selection of a new View to be the width of the
first grapheme in the text.
* Use new macro syntax for encoding sequences of keys
* Make convenience helpers for common test pattern
* Use indoc for inline indented raw strings
* Add feature flag for integration testing to disable rendering
* allows passing extra formatting options to LSPs
- adds optional field 'format' to [[language]] sections in 'languages.toml'
- passes specified options the LSPs via FormattingOptions
* cleaner conversion of formatting properties
* move formatting options inside lsp::Client
* cleans up formatting properties merge
* add reflow command
Users need to be able to hard-wrap text for many applications, including
comments in code, git commit messages, plaintext documentation, etc. It
often falls to the user to manually insert line breaks where appropriate
in order to hard-wrap text.
This commit introduces the "reflow" command (both in the TUI and core
library) to automatically hard-wrap selected text to a given number of
characters (defined by Unicode "extended grapheme clusters"). It handles
lines with a repeated prefix, such as comments ("//") and indentation.
* reflow: consider newlines to be word separators
* replace custom reflow impl with textwrap crate
* Sync reflow command docs with book
* reflow: add default max_line_len language setting
Co-authored-by: Vince Mutolo <vince@mutolo.org>
* log textobject query construction errors
The current behavior is that invalid queries are discarded silently
which makes it difficult to debug invalid textobjects (either invalid
syntax or an update may have come through that changed the valid set
of nodes).
* fix golang textobject query
`method_spec_list` used to be a named node but was removed (I think
for Helix, it was when updated to pull in the support for generics).
Instead of a named node for the list of method specs we have a bunch
of `method_spec` children nodes now. We can match on the set of them
with a `+` wildcard.
Example go for this query:
type Shape interface {
area() float64
perimeter() float64
}
Which is parsed as:
(source_file
(type_declaration
(type_spec
name: (type_identifier)
type: (interface_type
(method_spec
name: (field_identifier)
parameters: (parameter_list)
result: (type_identifier))
(method_spec
name: (field_identifier)
parameters: (parameter_list)
result: (type_identifier))))))
* Make textobject select last paragraph
Last paragraph shoud be selected if the cursor was placed on the
whitespace paragraph part and `map` is done, otherwise it would do
nothing useful, but now we select backwards for the last paragraph
which behaves similarly to kakoune, making `map` useful for the last
paragraph with whitespace. Example usecase is to copy and paste last
ledger cli paragraph quickly by `mapyp` to duplicate last entry.
* Fix typo in core textobject
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Add runtime language configuration (#1794)
* Add set-language typable command to change the language of current buffer.
* Add completer for available language options.
* Update set-language to refresh language server as well
* Add language id based config lookup on `syntax::Loader`.
* Add `Document::set_language3` to set programming language based on language
id.
* Update `Editor::refresh_language_server` to try language detection only if
language is not already set.
* Remove language detection from Editor::refresh_language_server
* Move document language detection to where the scratch buffer is saved.
* Rename Document::set_language3 to Document::set_language_by_language_id.
* Remove unnecessary clone in completers::language
* WIP: Rework indentation system
* Add ComplexNode for context-aware indentation (including a proof of concept for assignment statements in rust)
* Add switch statements to Go indents.toml (fixes the second half of issue #1523)
Remove commented-out code
* Migrate all existing indentation queries.
Add more options to ComplexNode and use them to improve C/C++ indentation.
* Add comments & replace Option<Vec<_>> with Vec<_>
* Add more detailed documentation for tree-sitter indentation
* Improve code style in indent.rs
* Use tree-sitter queries for indentation instead of TOML config.
Migrate existing indent queries.
* Add documentation for the new indent queries.
Change xtask docgen to look for indents.scm instead of indents.toml
* Improve code style in indent.rs.
Fix an issue with the rust indent query.
* Move indentation test sources to separate files.
Add `#not-kind-eq?`, `#same-line?` and `#not-same-line` custom predicates.
Improve the rust and c indent queries.
* Fix indent test.
Improve rust indent queries.
* Move indentation tests to integration test folder.
* Improve code style in indent.rs.
Reuse tree-sitter cursors for indentation queries.
* Migrate HCL indent query
* Replace custom loading in indent tests with a designated languages.toml
* Update indent query file name for --health command.
* Fix single-space formatting in indent queries.
* Add explanation for unwrapping.
Co-authored-by: Triton171 <triton0171@gmail.com>
