To make launch/connect not affect the test timeout:
- `browser` fixture is declared with `timeout: 0`.
- Default timeouts are set to 30sec for launch and 3min for connect.
Previously, we were guessing whether something is optional from the
comment (looking for stuff like "defaults to" or "optional").
To remove this error-prone technique, every optional property or
argument (but not option) is explicitly marked with "?".
As a result, fix documentation issues:
- Removed `TestStep.data` that is not a thing.
- Added `TestConfig.name` documentation.
- Refined a lot of optional types in the documentation.
- Aligned `test.fail()` and `test.slow()` docs with `test.skip()`.
- Strict set of docs vs types inconsistensies in the generator
A few changes:
- `Matchers<R, T>` now carries both return and argument type.
- Based on the argument type, we apply playwright-specific Page/Locator matchers.
- Return type is usually void, unless wrapped with `expect.resolves`,
`expect.rejects` or `expect.poll()`.
- To preserve compatibility with any extended types in the wild,
argument type is optional.
fix: wait for worker to be ready before initializing
The test dispatcher waits until a worker is ready before sending the
`init` message. This guarantees that the worker process is listening for the
message. Otherwise, the worker process might miss the `init` message and
the subsequent `run` message would crash the worker.
If you typo'd an `expect` property, you got a cryptic error message:
```
Uncaught TypeError: Cannot create proxy with a non-object as target or handler
```
Now we get this nice friendly message:
```
1) a.spec.ts:6:9 › explodes ======================================================================
Error: expect: Property 'toBeLessThen' not found.
Did you mean 'toBeLessThan'?
See https://playwright.dev/docs/test-assertions for available options and documentation.
5 | const { test } = pwt;
6 | test('explodes', () => {
> 7 | expect.soft(1).toBeLessThen();
| ^
8 | });
9 |
```
Fixes#13218
This has two values:
- `"hide"` to hide input caret for taking screenshot
- `"initial"` to keep caret behavior unchanged
Defaults to `"hide"`.
Fixes#12643
Previously, we always formed groups consisting of a single test.
Now, we group tests that share `beforeAll`/`afterAll` hooks into
`config.workers` equally-sized groups.
This patch:
- starts using directory of `package.json` to resolve default
output directory path
- starts using either `package.json` directory or configuration
directory to resolve all relative paths
References #12970
Resolves#11318.
* Adds `TestConfig.attachments` public API. (We opted to not implement an analog to the async `TestInfo.attach(…)` API.)
* Adds `TestConfig.attachments` to common reporters.
* Dogfoods some git and CI-info inference to generate useful atttachments
* Updates HTML Reporter to include a side bar to present a pre-defined set of attachments (a.k.a git/commit context sidebar)
Here's what it looks like:
<img width="1738" alt="Screen Shot 2022-03-21 at 3 23 28 PM" src="https://user-images.githubusercontent.com/11915034/159373291-8b937d30-fba3-472a-853a-766018f6b3e2.png">
See `tests/playwright-test/reporter-html.spec.ts` for an example of usage (for dogfood-ing only). In the future, if this becomes user-facing, there the Global Setup bit would likely become unnecessary (as would interaction with attachments array); there would likely just be a nice top-level config and/or CLI flag to enable collecting of info.
By default, fixtures share timeout with the test they are instantiated for.
However, for more heavy fixtures, especially worker-scoped ones, it makes
sense to have a separate timeout.
This introduces `{ timeout: number }` option to the list of fixture options
that opts the fixture into a dedicated timeout rather than sharing it
with the test.
Turns out relying on PWTRAP in stack is not reliable: depending on the
call structure, the stack might be cut unpredictably by Node.js.
This patch removes PWTRAP and instead plumbs explicit stack and
pre-set `apiName` all the way down to `wrapApiCall`.
Currently, running `npx playwright test` in a subfolder of your project
will result in a `test-results` folder created in your `cwd`.
This is unexpected; instead, we should always resolve all paths
against `rootDir` - directory that contains config.
This patch:
- adds call logs to track screenshot timeouts, e.g. due to
waiting for web fonts
- makes sure all snapshot expectations have `.png` extension
- throws a polite error when given a buffer or a string instead of a
page or a locator
- removes stray NL between error description and call log
- makes sure `apiName` is always correct (and adds a test for it)
- Line reporter now shows stats in addition to the test name:
```log
[chromium] › page/page-click-react.spec.ts:108:1 › should not retarget when element changes on hover
23% [21/93] Passed: 17 Flaky: 0 Failed: 0 Skipped: 4 (7s)
```
- When connected to a TTY or with `env.PLAYWRIGHT_LIVE_TERMINAL`
set to anything but `'0'` or `'false'`, line reporter updates in place.
- When not connected to a TTY, line reporter prints an update
after each ~1% of tests done, so it never prints more than 100 lines.
- Updated tests to the golden style.
This patch adds support to multiple diffs. These are possible
due to soft assertions.
Drive-by: rename second screenshot in `toHaveScreenshot` failure when
re-generating expectations from "expected" to "previous".
This patch:
- Enables configuration of certain defaults for some options of `expect.toHaveScreenshot` method via `TestProject.expect.toHaveScreenshot` property
- Sets sensible defaults for these options:
* `fonts: "ready"`
* `animations: "disabled"`
* `size: "css"`
New default is based on the very (unscientific) output of repeated a few
times:
```
$ for i in `seq 5 13`; do time npm run ctest -- --reporter=line --workers=$i 'page/*' 'selector*' 'channels*' 'resource-timing*'; done
```
This patch reverts 2 commits that removed the feature from the method:
- "fix: explicitly ignore maxDiffPixels in toMatchSnapshot (#12570)"
commit b8af8458d6.
- "chore: remove `maxDiffPixels` from toMatchSnapshot (#12539)"
commit a3dff45974.
The `screenshotsDir` option controls the expectation storage
for `toHaveScreenshot()` function.
The new expectation management for screenshots has the following
key properties:
- All screenshots are stored in a single folder called `screenshotsDir`.
- Screenshot names **do not** respect `snapshotDir` and `snapshotSuffix`
configurations.
- `screenshotsDir` is configurable per project. This way a "smoke tests"
project can re-use screenshots from "all tests" project.
- Host platform is a top-level folder.
For example, given the following config:
```js
// playwright.config.ts
module.exports = {
projects: [
{ name: 'Mobile Safari' },
{ name: 'Desktop Chrome' },
],
};
```
And the following test structure:
```
smoke-tests/
└── basic.spec.ts
```
Will result in the following screenshots folder structure by default:
```
__screenshots__/
└── darwin/
├── Mobile Safari/
│ └── smoke-tests/
│ └── basic.spec.ts/
│ └── screenshot-expectation.png
└── Desktop Chrome/
└── smoke-tests/
└── basic.spec.ts/
└── screenshot-expectation.png
```
Previously, we used to skip all the tests from the same file when
any `beforeAll` fails in the file.
Now, we only skip the rest of the tests affected by this particular
`beforeAll` and continue with other tests in the new worker.
Reland: worker.stop() before worker.run() was hanging because
`_runFinished` promise was not initially resolved.
---
This moves `beforeAll`, `afterAll` and some modifiers from running
as a separate entity into running inside a test.
Pros:
- All errors are reported as test errors.
- All artifacts are collected as test artifacts.
- Reporters support this out of the box.
Details:
- Each test computes the necessary hooks to run and runs them.
- Teardown is usually performed during the test (on test failure or worker stop).
- `skipRemaining` is added to `DonePayload` to preserve the behavior
where `beforeAll` hook failure skips subsequent tests.
This behavior can now be improved to only target tests affected by this hook.
* Revert "fix(hooks): separate test timeout from beforeAll/afterAll timeouts (#12413)"
This reverts commit 73dee69558.
* Revert "fix(test-runner): rely on test title paths instead of ordinal (#12414)"
This reverts commit d744a87aee.
* Revert "chore(test runner): run hooks/modifiers as a part of the test (#12329)"
This reverts commit 47045ba48d.
chore(test runner): run hooks/modifiers as a part of the test
This moves `beforeAll`, `afterAll` and some modifiers from running
as a separate entity into running inside a test.
Pros:
- All errors are reported as test errors.
- All artifacts are collected as test artifacts.
- Reporters support this out of the box.
Details:
- Each test computes the necessary hooks to run and runs them.
- Teardown is usually performed during the test (on test failure or worker stop).
- `skipRemaining` is added to `DonePayload` to preserve the behavior
where `beforeAll` hook failure skips subsequent tests.
This behavior can now be improved to only target tests affected by this hook.
This uses `Module._resolveFilename` to intercept module resolution and
check `tsconfig.paths` similarly to pirates usage ot `Module._compile`.
Previously, we resolved during compilation that required reproducible
resolution due to caching. Now we can resolve as we go and support
all `tsconfig.paths`.
- `stdout.isTTY` controls whether list reporter updates lines or just adds them;
- `env.CI` is used in a few places to affect the defaults:
- whether to open interactive html;
- default reporter dot/line;
- default terminal reporter added to non-terminal reporters;
- `env.PWTEST_SKIP_TEST_OUTPUT` is removed;
- `env.PW_TEST_DEBUG_REPORTERS` is introduced specifically for tests.
This reverts commit e5c9d1e39f.
Reason for revert: turns out this fix results in a 5-second delay
when starting tests in docker, with `test-results` folder being
a non-removable mount.
The reason for the delay is the `maxBusyTries` option that we
supply by default to rimraf when trying to remove the folder.
While this option might come handy when removing temporary
browser profile folder, it doesn't serve us well in this particular
usecase.
References #12106
This way we control the timeout error message from the runner,
so that later on we can differentiate between test timeout, fixture
timeout and hook timeout.
This patch prepares for the `toHaveScreenshot` implementation
by splitting common parts from `toMatchSnapshot`.
Drive-by: fix default extension generation from `.bin` to `.dat`
for unknown buffers.
This patch adds additional options to `toMatchSnapshot` method:
- `pixelCount` - acceptable number of pixels that differ to still
consider images equal. Unset by default.
- `pixelRatio` - acceptable ratio of all image pixels (from 0 to 1) that differ to still
consider images equal. Unset by default.
Fixes#12167, #10219
The new (as of 1.18) `async testInfo.attach(…)` API handles this
gracefully (and is part of the reason for the new API's existence).
However, for the foreseeable future, it's still possible to manually
push onto the attachments array where we can't validate the contents
until it's too late, so this change ensures more graceful handling in
that case.
Fixes#11565
Soft expects will still fail the test, but will not abort it's execution. As a consequence of this:
- `TestResult` now might have multiple errors, which is reflected with a new `testResult.erros: TestError[]` field.
- `TestInfo` now might have multiple errors as well, which is reflected with a new `testInfo.errors: TestError[]` field.
Fixes#7819
This reworks DeadlineRunner to use exception to signal timeout. This way,
we'll be able to run fixtures against a shared deadline vs their own
deadline and still get an easy control-flow timeout handling.
In several of the Playwright APIs, falsey values were not handled correctly. This changeset adds tests (and some fixes):
- route.continue: If options.postData was the empty string, the continue failed to override the post data.
- page.post (application/json with options.data: false|''|0|null): Raw falsey values were getting dropped (i.e. you can't do the equivalent of curl --header application/json … -d 'false'). This has been fixed with most values across all browsers, but an additional fix is needed for 'null' which the channel serializer treats extra specially.
- testInfo.attach: This didn't get reported as an error when options.path was the empty string, but should have been.
#11413 (and its fix#11414) inspired this search as they are the same
class of bug.
- Use file path, not content to calculate the attachment hash.
- Always cleanup fixture from the list on teardown, to avoid reporting
teardown error multiple times: from the test, and from the cleanup.
Previously, reporter would look for a stack frame directly in the test file.
Often times, that is not a top stack frame, especially when the test uses
some helper functions.
This changes error snippets and locations to use the top frame. When top
frame does not match the test file, we additionally show the location
to avoid confusion:
```
1) a.spec.ts:7:7 › foobar ========================================================================
Error: oh my
at helper.ts:5
3 |
4 | export function ohMy() {
> 5 | throw new Error('oh my');
| ^
6 | }
7 |
at ohMy (.../reporter-base-should-print-codeframe-from-a-helper/helper.ts:5:15)
at .../reporter-base-should-print-codeframe-from-a-helper/a.spec.ts:8:9
at FixtureRunner.resolveParametersAndRunHookOrTest (.../src/fixtures.ts:281:12)
```
