5.9 KiB
Glances -- Eye on your system
Description
Glances is a CLI curses based monitoring tool for GNU/Linux or BSD OS.
Glances uses the libstatgrab library to get information from your system. It is developed in Python and uses the python-statgrab lib.
Installation
From package manager
Packages exist for Arch, Fedora, Redhat ...
From source
Get the latest version:
$ wget https://github.com/downloads/nicolargo/glances/glances-1.3.2.tar.gz
Glances use a standard GNU style installer:
$ tar zxvf glances-1.3.2.tar.gz
$ cd glances-1.3.2
$ ./configure
$ make
$ sudo make install
Pre-requisites:
- Python 2.6+ (not tested with Python 3+)
- python-statgrab 0.5+ (did NOT work with python-statgrab 0.4)
Notes: For Debian. The Debian Squeeze repos only include the python-statgrab 0.4. You had to install the version 0.5 using the following commands:
$ sudo apt-get install libstatgrab-dev pkg-config python-dev make
$ wget http://ftp.uk.i-scream.org/sites/ftp.i-scream.org/pub/i-scream/pystatgrab/pystatgrab-0.5.tar.gz
$ tar zxvf pystatgrab-0.5.tar.gz
$ cd pystatgrab-0.5/
$ ./setup.py build
$ sudo ./setup.py install
Notes: For Ubuntu 10.04 and 10.10. The instruction to install the version 0.5 are here: https://github.com/nicolargo/glances/issues/5#issuecomment-3033194
Running
Easy:
$ glances.py
User guide
By default, stats are refreshed every second, to change this setting, you can use the -t option. For exemple to set the refrech rate to 5 seconds:
$ glances.py -t 5
Importants stats are colored:
- GREEN: stat counter is "OK"
- BLUE: stat counter is "CAREFUL"
- MAGENTA: stat counter is "WARNING"
- RED: stat counter is "CRITICAL"
When Glances is running, you can press:
-
'a' to set the automatic mode. The processes are sorted automatically
If CPU > 70%, sort by process "CPU consumption"
If MEM > 70%, sort by process "memory size"
-
'c' to sort the processes list by CPU consumption
-
'm' to sort the processes list by process size
-
'q' Exit
Header
The header shows the Glances version, the host name and the operating system name, version and architecture.
CPU
The CPU states are shown as a percentage and for the configured refresh time.
If user|kernel|nice CPU is < 50%, then status is set to "OK".
If user|kernel|nice CPU is > 50%, then status is set to "CAREFUL".
If user|kernel|nice CPU is > 70%, then status is set to "WARNING".
If user|kernel|nice CPU is > 90%, then status is set to "CRITICAL".
Load
On the Nosheep blog, Zach defines the average load: "In short it is the average sum of the number of processes waiting in the run-queue plus the number currently executing over 1, 5, and 15 minute time periods."
Glances gets the number of CPU cores to adapt the alerts. With Glances, alerts on average load are only set on 5 and 15 mins.
If average load is < O.7*Core, then status is set to "OK".
If average load is > O.7*Core, then status is set to "CAREFUL".
If average load is > 1*Core, then status is set to "WARNING".
If average load is > 5*Core, then status is set to "CRITICAL".
Memory
Glances uses tree columns: memory (RAM), swap and "real".
Real used memory is: used - cache.
Real free memory is: free + cache.
With Glances, alerts are only set for on used swap and real memory.
If memory is < 50%, then status is set to "OK".
If memory is > 50%, then status is set to "CAREFUL".
If memory is > 70%, then status is set to "WARNING".
If memory is > 90%, then status is set to "CRITICAL".
Network bit rate
Glances display the network interface bit rate. The unit is adapted dynamicaly (bits per second, Kbits per second, Mbits per second...).
Alerts are set only if the network interface maximum speed is available.
If bitrate is < 50%, then status is set to "OK".
If bitrate is > 50%, then status is set to "CAREFUL".
If bitrate is > 70%, then status is set to "WARNING".
If bitrate is > 90%, then status is set to "CRITICAL".
For exemple, on a 100 Mbps Ethernet interface, the warning status is set if the bit rate is higher than 70 Mbps.
Disk I/O
Glances display the disk I/O throughput. The unit is adapted dynamicaly (bytes per second, Kbytes per second, Mbytes per second...).
There is no alert on this information.
Filesystem
Glances display the total and used filesytem disk space. The unit is adapted dynamicaly (bytes per second, Kbytes per second, Mbytes per second...).
Alerts are set for used disk space:
If disk used is < 50%, then status is set to "OK".
If disk used is > 50%, then status is set to "CAREFUL".
If disk used is > 70%, then status is set to "WARNING".
If disk used is > 90%, then status is set to "CRITICAL".
Processes
Glances displays a summary and a list of processes.
By default (or if you hit the 'a' key) the process list is automaticaly sorted by CPU of memory consumption.
The number of processes in the list is adapted to the screen size.
Footer
Glances displays a caption and the current time/date.
Todo
You are welcome to contribute to this software.
- Packaging for Debian, Ubuntu, BSD...
- Check the needed Python library in the configure.ac
- Add file system stats when the python-statgrab is corrected
- Add a user guide window