Later mappers should be able to rely on sym being a value of a certain type.
In this crash case tar.go had this:
d.FieldUTF8NullFixedLen("mtime", 12, scalar.SymUParseUint(8), scalar.DescriptionSymUUnixTime)
If mtime was empty string SymUParseUint was not even called so did not bail out running
all mappers.
Split fat macho into own decoder macho_fat. This also fixes issue with section
offset etc not being correct as they are from the start of each embedded file.
Make all address and offset field be in hex.
Decode __cstring, __ustring and __cfstring sections.
Fix LC_ENCRYPTION_INFO_64 missing pading issue.
Skip ranging for __bss and __common as they dont have any data in the file.
Simplifed magic handling a bit and add symbols.
Simplified state struct field, had redudant struct.
Doing it thru a propery in the decode fn feels a bit hidden and will
also not get set on failed decoding.
Now array is not range sorted, logic is you care about index number and ordering.
Struct is range sorted as you will prefer to fields by name.
Feels like what one would expect when doing to_entries on a decode value struct etc,
that is get the pairs in same order as decoder wants.
Quite sure this used to the case but was change to sorted key order when
to_entries was move from bein implemented in jq to be internal for performance
reasons. Now internal gojq to_entries has a special case for JQValue objects.
Also use new gojq.JQType* constants for type strings and switch binary type
to look more like strings. Can still use _exttype to get "binary".
json, yaml, toml, xml, html, csv are now normal formats and most of them also particiate
in probing (not html and csv).
Also fixes a bunch of bugs in to/fromxml, to/fromjq etc.
Move registry to interp and add support for functions and filesystems.
This will be used later for allow formats to add own functions and fq code.
Add gojqextra function helpers to have more comfortable API to add functions.
Takes care of argument type casting and JQValue:s and some more things.
Refactor interp package to use new function helper and registry. Probably
fixes a bunch of JQValue bugs and other type errors.
Refactor out some mpeg nal things to mpeg format.
Refactor interp jq code into display.q and init.jq.
Remove undocumented aes_ctr funciton, was a test. Hopefully will add more crypto things laster.
Decode API design is that Try* returns error non-Try panics.
Also rename Must* as they should panic and introduce some new Try* functions
that were missing.
Some encoding fuctions accept binary used string as input type, should be any.
Add cast helper functions, hopefully can be useful in future for even nicer
function bindings api.
Use smallest int type for int64, uint6 and *big.Int
Fixes integer serialization for yaml and toml for small integers, othweise
they will end up as strings.
Add toxml/fromxml for XML encoding, mighe be lossy on ordering
fromxml has {seq:bool} to add #seq attributes to improve ordering
toxml has {indent:number} to choose space indent depth
Add tojson, same as in jq but also has {indent:number} options
Add toyaml/fromyaml for YAML
Add totoml/fromtoml for TOML
Add tojq/fromjq for jq-flavored JSON (optional quotes for keys, comments and trailing commas support)
Add tocsv/fromcsv for CSV
formcvs takes {comma:string, comment:string} for custom separtor and comment character
Rename/split hex into tohex/fromhex
Rename/split base64 into tobase64/frombase64
tobase64/frombase64 takes {encoding:string} option for base64 flavour (std, url, rawstd, rawurl)
Add to/from<format> urlpath, urlquery, url, xmlentities, base64, hex
Add to<hash> md4, md5, sha1, sha256, sha512, sha3_224, sha3_256, sha3_384, sha3_512
Add to/from<encoding> iso8859-1, utf8, utf16, utf16le, utf16be
PSSH decoding probably got broken in some refactoring. system id is 16 bytes,
also scalar mapper should use cloned reader to not affect reader which in the case
broke reading system id bytes.
Add test with playread and widevine pssh boxes
Related to #282
Rename s/interface{}/any/g
Preparation for using generics in decode API and native jq funcations etc
Remove some unused linter ignores as linter has been fixed
Some formats might want to control child order
mp4: Keep tracks in track id order
dns: Keep label component order
elf: Keep seciton order
macho: Keep command and section order
interp: Refactor format help and also include options
interp: Add -o name=@path to load file content as value (not documented yet, might change)
interp,decode: Expose decode out value as _out (might change)
interp: Refactor foramts.jq into format_{decode,func,include}.jq
interp: Refactor torepr into _format_func for generic format function overloading
interp: Refactor -o options parsing to be more generic and collect unknowns options to be used as format options
decode of decode alises
func for format overloaded functions
include for format specific jq functions (also _help, torepr etc)
flac_frame: Add bits_per_sample option
mp3: Add max_unique_header_config and max_sync_seek options
mp4: Add decode_samples and allow_truncate options
avc_au: Has length_size option
hevc_au: Has length_size option
aac_frame: Has object_typee option
doc: Rewrite format doc generation, less hack more jq
mp3: Remove one level of struct for granales
dump: Makes it a bit easier to understand array of arrays/structs.
avro_ocf: Rename ocf.go -> avro_ocr.go to have same name of source file as format
pcap,pcapng: Rename tcp flow struct to tcp_connection, makes more sense i think
mp4: Add ISOBMFF to format description
Upstream changes:
Many performance improvements
Error message improvments
Lots of refactoring
Most of the JQValue interface changes in gojq fork had to be reworked but
resultet in a much nicer and cleaner changeset.
fq changes:
Assignment to JQValue (like a decode value) now shallowly converts the value into
a jq value before assigning. Was a bit hacky as it was and this makes JQValue
behave more like real jq values. This also fixes some advanced indexing issues.
Actual custom path updates will be something for the future.
Refactor to use groups between network layers to make them less coupled and reusable:
link_frame (ethernet etc)
inet_packet (ipv4,ipv6 etc)
ip_packet (tcp packet (not stream), udp segment etc)
Rename data to payload as i think it makes more sense for network data
Padding could end up double.
Remove to*range($pad) as it probably just confusing to be able
to pad an existing range, what to show in hexdump etc? zero bits
that do not actuall exist at that range?
Add tests and binary stdout support to tests
repl now rewrites query to do implicit display inside the sub eval.
This makes it possible to interrupt eval and output in a better and faster way.
Make JSON encoder fail early on errors.
Add more interrupt tests.
Add explode for binary that explode into an array of the binary unit tobits
Remove scan_toend as it feels a bit weird and one can use tobytes | .[match(...):] instead
Some general cleanup also
Now repl, slurp and help implemented using same query rewrite.
Include filename context in error if possible.
Add spew function that does opposite of slurp.
Start of help infra, not done or documented yet.
Show error pointer on parse error.
Rename internal eval to _eval and make eval be wrapper that
does rewrite and has various eror handling etc.
Nicer repl, slupr and help errors.
Speeds up interp quite a bit.
Also good as i've start to use more includes to make code easier to follow
where thigns come from and also makes jq-lsp happier.
Also rename evalContext to evalInstace to make it less confused with context.
Rewrite non-sub-repl queries as "q" -> ".[] | q" and pass in inputs as array.
Before each input did an eval.
Also fixup error message a bit, skip line:column when they dont make sense.
Fixes missing function errors for fq builtins
Add includes to fix some other missing function errors
Add COMPLETION_TIMEOUT env to increase comepletion timeout during test using -race
There is also toradix($base; $table)/fromradix($base; $table) for custom symbols and bases.
Add radix tests
Part of cleaning up all convert/tranformation functions into to/from*.
Remove number_to_bytes as with better binary support it can be written as:
1234 | tobytes | [.[range(.size)]] and soon as 1234 | tobytes | explode
Rename buffer to binary. Still some work left what to call buffer/binary in decode code.
Document decode value and binary type
Fix proper unit padding for tobytes and add still undocumenated extra padding argument.
Add some additional binary tests
Basic support, can also do CER and DER but without any extra validation.
No schema support.
Redo format doc.md usage a bit, now format/<dir>/<format>.md instead.
Related to #20
Remove bitio.Buffer layer. bitio.Buffer was a kitchen sink layer with helpers
now it's just a buffer and most functions have been moved to decode instead.
bitio package now only have primitive types and functions simialar to standard
library io and bytes packages.
Make nearly eveything internally use bitio.Bit* interfaces so that slicing work
correctly this will also make it possible to start experimenting with more
complicated silcing helpers, ex things like:
breplace(.header.bitrate; 123) to get a new buffer with bitrate changed.
Was already handled in fq in various places as gojq uses them
Update msgpack to support negative integers that can't represented as int64
Rename read try* number functions to make them more explicit
Uses same rule as jq math functions, 1 arg uses input, more than one all passed as args.
So "bnot 1" -> "1 | bnot", "1 bsl 1" -> "bsl(1; 1)"
Don't think it's worth changing the jq syntax for this and also it could make fq
scripts no compatiblr with other jq tools. Non-10 base number literals are still allowed
but should probably not be used in scripts, only in repl and with cli.
Now all regexp functions should work similar to string version for buffers.
Added scan_toend that works as scan but outputs buffer from match to end of buffer,
useful when trying to decode a format and you dont know or care to limit.
Move scalar into own package.
Split scalar code into decode related scalar code (that reads etc) and
scalar code that just transform the scalar value.
Use a scalar.Mapper interface instead of just a function.
Make mappers, assert and validat impement the interface.
