This commit allows the following configuration:
```
wezterm -n --config 'colors = { selection_fg = "clear", selection_bg = "rgba:50% 50% 50% 50%" }'
```
which sets the selection_bg to fully transparent, and selection_bg to
50% transparent gray.
When selection_fg is fully transparent we'll use the normal fg color.
When selection_bg is partially (or fully!) transparent, it will be
alpha blended over the current cell background color.
To support this, the config file will now accept rgba colors specified
as 4 whitespace delimited numeric values. If a value ends with `%` it
is interpreted as a number in the range 0-100. Otherwise, it is
interpreted as a number in the range 0-255. The 4 values are
red, green, blue, alpha.
At this time, only the selection_fg and selection_bg settings accept
alpha values.
refs: #1615
Resolves a little bit of the awkward duplication of color types
between some of the crates by factoring them a little bit better.
This is prep for allowing specifying alpha for some colors
in the config.
This puts to final rest #478, wherein ligatured glyphs that span
cells would render portions of the glyph with the wrong fg color,
where wrong was usually the bg color and cause the glyph to turn
invisible when cursoring through the ligature.
The approach used here is to divide the glyph into 7 discrete strips
where each strip either intersects with the cursor, the selection, or
neither. That allows us to render each strip with the appropriate
foreground color.
This change simplifies some of the logic and allows some other code
to be removed, so that feels good!
As is tradition with these renderer changes, there's a good chance that
I overlooked something in testing and that the metrics or alignment
might be slightly off for some font/text combo. Let's see how this
goes!
refs: #784
refs: #478
refs: #1617
For a sequence like `e U+20d7` the intent is to render the `e` with
a vector arrow over the top.
This is typically implemented by fonts as an `e` followed by the
vector glyph (or vice versa), where either one of those may have
a zero advance so that the two elements are combined.
There were two problems here:
* During shaping we'd see the zero advance and assume that the entry
was useless and skip it
* During rendering, if we didn't think it had any cell width, we'd
not render it
Cursoring through that particular sequence can hide the vector
mark if the cursor is set to the default block cursor due to annoyances
in how the block cursor is rendered (it changes the fg color to match
the bg, but for elements outside where we think the cursor is, this
makes those elements invisible).
refs: https://github.com/wez/wezterm/issues/1617
This is a more robust approach; we make a separate pass to figure
out information about the (harfbuzz) cluster for a sequence of glyphs,
and then map that sequence back to the original cell sequence, and
from there compute the total cell width for the run, then distribute
the glyphs across the run.
This should yield more sane results for bidi.
Fixup the x-position math; it was still wonky despite the
efforts in 5f2c905db8 and
af92265ffb
refs: #1570
refs: #1607
refs: #1563
This allows unicode_version to be respected again when rendering.
The updated emoji-presentation.sh script now highlights this slightly
better by putting `.` characters after the emoji; unicode version 14
emoji presentation will show the `.` in the 3rd column, while earlier
versions will show it in the 2nd column for glyphs that are sensitive
to the version.
refs: #1607
refs: #1563
This commit does two related things, from opposite ends of the spectrum:
* Sets the sticky bit on pid files and unix sockets to avoid tmpwatch
deleting them in cleanup scenarios
* Falls back to looking at the changed time if the filesystem doesn't
support reporting creation time when wezterm does its own liveness
and cleanup checks for unix domain sockets in the runtime dir
* Allow any wezterm instance to perform that cleanup
refs: #1601
with:
```
bidi_enabled = false,
bidi_direction = "RightToLeft",
```
lines are now rendered right-justified in the terminal.
I think there's still work to do on this, because the cluster
order seems weird to me, but it's hard for me to intuit how
this should really look.
refs: #784
This commit refines bidi property handling:
* experimental_bidi has been split into two new configuration settings;
`bidi_enabled` (which controls whether the terminal performs implicit
bidi processing) and `bidi_direction` which specifies the base
direction and whether auto detection is enabled.
* The `Line` type can now store those bidi properties (they are actually
split across 3 bits representing enabled, auto-detection and
direction)
* The terminal now has a concept of active bidi properties and default
bidi properties
* The default properties are pulled from the wezterm configuration
* active bidi properties are potentially set via escape sequences,
BDSM (which sets bidi_enabled) and SCP (which sets bidi_direction).
We don't support the 2501 temporary dec private mode suggested by
the BIDI recommendation doc at this time.
* When creating new `Line`'s or clearing from the start of a `Line`, the
effective bidi properties are computed (from the active props,
falling back to default propr) and applied to the `Line`.
* When rendering the line, we now look at its bidi properties instead
of just the global config.
The default bidi properties are `bidi_enabled: false` and
`bidi_direction: LeftToRight` which corresponds to the typical
bidi-unaware mode of most terminals.
It is possible to live reload the config to change the effective
defaults, but note that they apply, by design, to new lines being
processed through the terminal. That means existing output is
left unaffected by a config reload, but subsequently printed lines
will respect it. Pressing CTRL-L or otherwise contriving to have
the running application refresh its display should cause the
refreshed display to update and apply the new bidi mode.
refs: #784
This commit is larger than it appears to due fanout from threading
through bidi parameters. The main changes are:
* When clustering cells, add an additional phase to resolve embedding
levels and further sub-divide a cluster based on the resolved bidi
runs; this is where we get the direction for a run and this needs
to be passed through to the shaper.
* When doing bidi, the forced cluster boundary hack that we use to
de-ligature when cursoring through text needs to be disabled,
otherwise the cursor appears to push/rotate the text in that
cluster when moving through it! We'll need to find a different
way to handle shading the cursor that eliminates the original
cursor/ligature/black issue.
* In the shaper, the logic for coalescing unresolved runs for font
fallback assumed LTR and needed to be adjusted to cluster RTL.
That meant also computing a little index of codepoint lengths.
* Added `experimental_bidi` boolean option that defaults to false.
When enabled, it activates the bidi processing phase in clustering
with a strong hint that the paragraph is LTR.
This implementation is incomplete and/or wrong for a number of cases:
* The config option should probably allow specifying the paragraph
direction hint to use by default.
* https://terminal-wg.pages.freedesktop.org/bidi/recommendation/paragraphs.html
recommends that bidi be applied to logical lines, not physical
lines (or really: ranges within physical lines) that we're doing
at the moment
* The paragraph direction hint should be overridden by cell attributes
and other escapes; see 85a6b178cf
and probably others.
However, as of this commit, if you `experimental_bidi=true` then
```
echo This is RTL -> عربي فارسی bidi
```
(that text was sourced from:
https://github.com/microsoft/terminal/issues/538#issuecomment-677017322)
then wezterm will display the text in the same order as the text
renders in Chrome for that github comment.
```
; ./target/debug/wezterm --config experimental_bidi=false ls-fonts --text "عربي فارسی ->"
LeftToRight
0 ع \u{639} x_adv=8 glyph=300 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
2 ر \u{631} x_adv=3.78125 glyph=273 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
4 ب \u{628} x_adv=4 glyph=244 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
6 ي \u{64a} x_adv=4 glyph=363 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
8 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
9 ف \u{641} x_adv=11 glyph=328 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
11 ا \u{627} x_adv=4 glyph=240 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
13 ر \u{631} x_adv=3.78125 glyph=273 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
15 س \u{633} x_adv=10 glyph=278 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
17 ی \u{6cc} x_adv=4 glyph=664 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
19 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
20 - \u{2d} x_adv=8 glyph=276 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
21 > \u{3e} x_adv=8 glyph=338 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
```
```
; ./target/debug/wezterm --config experimental_bidi=true ls-fonts --text "عربي فارسی ->"
RightToLeft
17 ی \u{6cc} x_adv=9 glyph=906 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
15 س \u{633} x_adv=10 glyph=277 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
13 ر \u{631} x_adv=4.78125 glyph=272 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
11 ا \u{627} x_adv=4 glyph=241 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
9 ف \u{641} x_adv=5 glyph=329 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
8 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
6 ي \u{64a} x_adv=9 glyph=904 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
4 ب \u{628} x_adv=4 glyph=243 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
2 ر \u{631} x_adv=5 glyph=273 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
0 ع \u{639} x_adv=6 glyph=301 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
LeftToRight
0 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
1 - \u{2d} x_adv=8 glyph=480 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
2 > \u{3e} x_adv=8 glyph=470 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
;
```
refs: https://github.com/wez/wezterm/issues/784
This commit centralizes the focus-loss logic to the Window so
that activating a new tab will deactivate the pane in the current
window.
Note that this cannot see overlays in the gui, but overlays shouldn't
care about focus, so it should be ok.
refs: https://github.com/wez/wezterm/discussions/796
This commit enables the following config to work for local (not mux yet!)
panes:
```lua
local wezterm = require 'wezterm'
wezterm.on("format-tab-title", function(tab, tabs, panes, config, hover, max_width)
if tab.is_active then
return {
{Background={Color="blue"}},
{Text=" " .. tab.active_pane.title .. " "},
}
end
local has_unseen_output = false
for _, pane in ipairs(tab.panes) do
if pane.has_unseen_output then
has_unseen_output = true
break;
end
end
if has_unseen_output then
return {
{Background={Color="Orange"}},
{Text=" " .. tab.active_pane.title .. " "},
}
end
return tab.active_pane.title
end)
return {
}
```
refs: https://github.com/wez/wezterm/discussions/796
We budget size based on the x_advance, which can be 1 pixel less
than the width of the glyph texture, so we could often end up
omitting the last character in "Launcher" or "default" in the
tab title or right status area.
This commit uses x_advance in both places.
Make the scrolling mostly independent of the active row; adjust
the top row when hitting the top/bottom edges of the display.
Mouse movement no longer changes the scroll position. Instead,
the wheel is used to scroll the list.
refs: https://github.com/wez/wezterm/issues/1485
This isn't ideal, but it is better than previously: we would
close the window and before the Drop impl had updated the
list of known windows, we'd try to re-assign that window
to another mux window in a different workspace, but it would
never appear because the window was closed.
refs: https://github.com/wez/wezterm/issues/1531
Originally I had this the other way around but it was problematic
when considering things like maximized, font scaling and full screen
states.
refs: https://github.com/wez/wezterm/issues/1531
Rather than just quitting the app and potentially silently killing off
a number of panes that might be running in other workspaces, we now
will pick one of those workspaces and activate it.
refs: #1531
This action causes the active workspace for the gui to change.
If the name is omitted a random name will be generated.
If the workspace doesn't exist, it will be be created.
The optional spawn parameter can be used to launch a specific
program into the new workspace; if omitted, the default prog
will be used.
The gui only supports a single active workspace. Switching workspaces
will repurpose existing gui windows and re-assign them to windows
in the new workspace, adjusting their size to fit those windows,
spawning new windows or closing unused windows as required.
The gui now exits when there are no panes in the active workspace,
rather than no panes at all.
refs: #1531
The mux now has a notion of which client is actively doing things.
This allows, for example, newly spawned windows to take on the
active workspace for a given client.
The gui now assigns a client id on startup, and sets the active
workspace to `default`.
The mux server temporarily overrides the active id to that of
the currently dispatching client when processing PDUs.
refs: https://github.com/wez/wezterm/issues/1531
Tidies up some code duplication within the mux protocol handler.
Move some of the logic into Mux, remove legacy Spawn Pdu to reduce
more duplication.
I want to dedup some of the similar logic that exists in the gui
spawn implementation as well in a follow up.
