* gui: improve mouse text selection
* implement mouse press capture between the terminal and UI, so when you
start selecting text from the terminal the tabs won't activate and
vice-versa
* selecting from the top and bottom lines won't scroll the viewport
anymore, it will only scroll if the mouse is moved out of line bounds
* change cell selection so that it behaves like text selection usually
does in other popular software
refs: https://github.com/wez/wezterm/issues/1199
refs: https://github.com/wez/wezterm/issues/1386
refs: https://github.com/wez/wezterm/issues/354
`ActivateKeyTable` pushes a new named key table entry onto the stack.
It has some parameters:
* name - required; the name of a entry in `key_tables` that should be
activated.
* timeout_milliseconds - how long the entry should remain active.
When this duration elapses, the entry will pop itself from the
stack. If omitted, the entry will not pop itself due to time.
* one_shot - if true (or omitted; true is default), the entry will pop
itself after one use. If false the entry will not pop itself after use.
But note that if timeout_milliseconds is set then it may pop itself
due to time.
* replace_current - if true, will pop the current stack entry before
activating the current entry. Most useful when combined with some
other one_shot=false activation.
`PopKeyTable` explicitly pops the top of the key table stack.
Most useful with `one_shot=false` activations.
`ClearKeyTableStack` clears the key table stack. Most useful with
`one_shot=false` activations.
```
local wezterm = require 'wezterm';
wezterm.on("update-right-status", function(window, pane)
local name = window:active_key_table()
if name then
name = "TABLE: " .. name
end
window:set_right_status(name or "")
end);
return {
debug_key_events = true,
keys = {
-- Activate the "woot" table as a one-shot with
-- a 2 second timeout, after which it will restore
-- the default table.
{
key="a", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
timeout_milliseconds=2000,
}
}
},
-- Activate the "woot" table.
-- The table will remain active until explicitly popped
-- by the `PopKeyTable` action. See the Escape binding below!
{
key="b", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
one_shot = false,
}
}
},
-- Activate the "woot" table as a one-shot with
-- no timeout. It will remain active until a key is pressed,
-- after which is will restore the default table.
{
key="c", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
}
}
},
},
key_tables = {
woot = {
{key="a", action=wezterm.action{SendString="woot"}},
{key="Escape", action="PopKeyTable"},
},
},
}
```
This commit introduces a new `key_tables` config option that allows
defining named groups of key assignments, but that have no effect yet.
To support this change, the InputMap type has been adjusted to allow
for the idea that multiple tables can exist.
refs: https://github.com/wez/wezterm/discussions/1812
* termwiz: add support for kitty image using shm mode
* termwiz: kitty image shm cleanup error handling
* termwiz: kitty image shm create wrapper for HANDLE and impl Drop for it
* termwiz: kitty image shm refactor windows implementation
Signed-off-by: Shreesh Adiga <16567adigashreesh@gmail.com>
The gist of the issue is that when setting eg: scale=1.2 to draw
a larger CJK glyph, it is drawn at the same descender level, which
makes it more likely to leave the top of the cell.
This commit adjusts the y position by the difference between the
original and the scaled descender so that is less likely to cause
problems.
refs: https://github.com/wez/wezterm/issues/1803
This is mostly a refactoring: pulling out the discrete width/height from
the `new_window` method and preparing to pass down x/y coords as well.
The types are expressed as Dimension so that screen relative sizes could
be expressed in the future... once we know how to obtain that
information on each platform.
refs: https://github.com/wez/wezterm/issues/1794
The tab bar height could vary by a couple of pixels depending on the
text shown inside it, which results in visual jitter as the title bar
changes.
Avoid that: always return our constant reserved amount of space for the
tab bar, even if it means that there are a couple of pixels "wasted".
cc: @davidrios
A bit of a PITA, this commit:
* Introduces a DeferredKeyCode type that defers resolving a concrete
keycode
* Adds key_map_preference config which can be Mapped or Physical
* Key map building resolves the keycode using key_map_preference
* Default key assignments have been re-phrased in order to produce
DeferredKeyCodes
* User-specified keys without `mapped:` or `phys:` prefixes will
resolve according to key_map_preference
refs: https://github.com/wez/wezterm/issues/1788
refs: https://github.com/wez/wezterm/issues/1784
Previously, we'd create a clipboard handler associated with a GUI window
and take care to pass that down to the underlying Pane whenever we
spawned a new pane.
For the mux server, instead of being associated with a GUI window, the
clipboard was a special RemoteClipboard that would send a PDU through
to the client that spawned the window.
The bug here was that when that client went away, the clipboard for
that window was broken.
If the mux server was the built-in mux in a gui process this could
leave a tab without working OSC 52 clipboard support.
This commit restructures things so that the Mux is responsible for
assigning a clipboard handler that rephrases the clipboard event
as a MuxNotification.
Both the GUI frontend and the mux server dispatcher already listen
for mux notifications and translate those events into appropriate
operations on the system clipboard or Pdus to send to the client(s).
refs: #1790
Previously, we'd just default the resize quirk on for all programs on
Windows.
That pessimizes the otherwise fine behavior of `wezterm ssh` or mux
connections to unixy platforms.
This commit moves the quirk out of the config trait and makes it
a runtime property of the terminal, and then arranges for it
to be set when we know that we set up a conpty for the terminal.
refs: #1265
In https://github.com/wez/wezterm/pull/1779#issuecomment-1082058134 we
discuss a weird case where the tab bar height is computed as 0 and then
gets stuck at 0.
What's happening is that the initial `TabBarState::default()` value has
no items yet, and `build_fancy_tab` generates an area that occupies 0
pixels. This computed element is cached, and then the height from that
is cached.
When `invalidate_fancy_tab` is called, it didn't invalidate the cached
height and the resultant metrics were wonky.
One possible fix for this was to also invalidate the cached height,
but since that height is already stored in the built fancy tab,
we can remove that derived-cached value in favor of just passing
down the value.
refs: https://github.com/wez/wezterm/pull/1779
- Simplify scroll thumb calculations
- Correct thumb position when dragging with mouse
- Support border OS parameters
- Use usize for OS borders, to explicitly only accept positive integers
- Get correct tab height when using fancy tab bar
- Correctly draw depending on tab bar position
- Adjust minimum thumb size to be 1/2 of a cell height, so it has consistent size across platforms and screen densities
Fixes#1525
After killing the remote pane, we no longer trigger the renderable
poll stuff that would detect that the pane was dead.
Let's speculatively set it to dead so that we don't get stuck with
stray tabs/panes.
https://github.com/wez/wezterm/issues/1752
There were a a couple of issues:
* `ImageData::hash` would re-hash the image on every call, and this was
called for every cell that comprised an image on the mux server side
* `SerializedLine` needed to understand how to remove the `Arc<ImageData>`
image attachments so that we didn't serialize a complete copy of the
image per cell that comprised the image.
A new RPC was introduced to attempt to fetch `ImageData` given its
content hash and pane, row and cell index as a hint to locate it.
A client side LRU of content hash to `ImageData` is used to avoid
issuing repeat calls to that new RPC.
refs: #1237
