Tidies up some code duplication within the mux protocol handler.
Move some of the logic into Mux, remove legacy Spawn Pdu to reduce
more duplication.
I want to dedup some of the similar logic that exists in the gui
spawn implementation as well in a follow up.
The issue is that we work hard to match the keys pre-composition,
but for French and Norwegian layouts ALT-number are valid,
useful punctuation keys. It's awkward to make exceptions for
ALT keys when matching assignments, especially on macOS, and
the simplest thing to do is simply to remove the assignments
and leave it to our users to add their own if they want them.
The ctrl-shift and cmd based assignments are generally much
easier to keep, because those key combinations are not widely
used default mappings on any keyboard layout.
refs: #1543
refs: #1542
refs: https://github.com/wez/wezterm/pull/1132
This resolves some issues with non-US layouts (French, Norweigan)
where ALT-number are important and useful punctuation that we were
otherwise blocking.
This new behavior seems consistent with eg: vte terminals on linux
when switching to a French layout.
refs: #1543
refs: #1542
`ScrollByPage` can accept non-integer values in the configuration.
This allows fractional page scrolling, such as by half a page.
The default remains the same, at 1 page.
If we know that the remote host is a unix system, and that it uses some
version of the posix shell, then we can adjust our command line to cd to
the requested directory (as set by OSC 7) and then exec the requested
command.
That's what SshDomain::assume_unix indicates and what this commit does.
This puts us in a better position for the future to be able
to configure whether we use wezterm, tmux or no multiplexing.
Today we allow wezterm or no multiplexing.
Add docs on this new setting.
refs: https://github.com/wez/wezterm/issues/1456
That top level config/src/lib.rs has been too big for too long.
Break it up a little.
(I recommend running `cargo clean` if you're updating across
this change to avoid a rust ICE with it cached on-disk state)
Previously, it would skip loading the initial config and allow
loading it later by using the reload hotkey. That reload behavior
was an accident!
Another problem with the old approach is that everything else was
set up as if the config had been loaded, which is now causing
confusion for code that wants to decide whether we are using
that configuration or not.
This commit formalizes the skip by remembering that state globally.
This change helps to simplify some special cases around command
line overrides as well, as well as allows cli overrides to take
effect when the user doesn't have a config file.
They have their own versions of these options, and logically it doesn't
make sense to use the default_prog from the `local` domain with a wsl
domain.
refs: #1242
This returns the default set of domains that would be populated
in the wsl_domains config. This is useful if you want to override
eg: the default_prog for specific domain(s), or want to otherwise
add additional variations on the default list.
When set, changes the default domain to the domain with the specified
name, which potentially affects the default program.
eg: default_domain = "WSL:Ubuntu-18.04" will cause the initial tab
to be spawned via WSL.
The idea is that we want to be able to spawn into wsl with the
convenience of a local domain, but without the awkwardness of
it having a different filesystem namespace.
It would also be great to be able to spawn a new tab or pane
in the same domain and pick up the cwd of the existing one.
The WslDomain allows the user to explicitly list WslDomains
and control eg: default shell, username and so on, but wezterm
will pre-fill a default list of domains based on the `wsl -l`
output that we were already using in the launcher menu.
The existing LocalDomain has been augmented to understand that
it may need to fixup a command invocation and that gives it
the opportunity to rewrite the command so that we can launch
it via `wsl.exe` and pass down the cwd and so on.
This same technique might be extensible to eg: docker instances
in the future.
This commit:
* Introduces `wsl_domains` config and its default list of wsl
distributions
* Creates LocalDomain instances from that list
* The launcher menu allows spawning a new tab via one of those domains
Using the new publish/discovery stuff from the past couple of commits,
if we can find a matching socket path for a running gui, and the
configuration is likely a match, then use the mux protocol to talk
to the already running gui and ask it to spawn the equivalent program
into the same process.
refs: https://github.com/wez/wezterm/discussions/1486
We need 100% of the info for it to work correctly, so this commit:
* Exposes the keyboard encoding mode via the Pane trait
* Adds the scan code to the RawKeyEvent
* Has the GUI perform the encoding if the keyboard is set that way
* Removes the basic encoder from termwiz in favor of the gui level one
The net result is that we bypass the Pane::key_up/Pane::key_down methods
in almost all cases when the encoding mode is set to win32-input-mode.
There is now a config option: allow_win32_input_mode that can be
used to prevent using this mode.
refs: #1509
* Allow selecting the first few rows by number
* Allow scrolling through long lists of items
* Add actions from key assignments to list
refs: #1485
refs: #1413
This commit adjusts the config parsing layer so that:
```
return {
keys = {
{key="a", ...}
}
}
```
is now treated as being implicitly the same as `key="phys:A"`.
You can explicitly use `key="mapped:a"` to use the post-keyboard-map
processed value of a key to trigger an assignment, rather than
the physical key location.
refs: #1483
When set, the cursor will change to this color during dead key
or leader key processing.
```lua
return {
colors = {
dead_key_cursor = "orange",
},
}
```
refs: #686
refs: #688
We only need to recompute when the tab content changes, or when
the window is resized, plus invalidations of the shape cache
of texture atlas filling up.
Hover events don't need to re-shape.
We can now also place the tab bar at the bottom of the screen again.
This commit adds a CSS box model inspired element / layout
facility, and replaces the hand implemented fancy tab bar
element render.
This makes the code for fancy tab bar much easier to read
and update.
The right status area now expands to the full height of the
tab bar area, and uses a line height of 2.0, which makes
it line up nicely in the tab bar.
This adds string serialization for the keycode and modifiers as
used in the config.
We can't simply tell the base types to serialize in this form because
we may serialize and pass those via the mux protocol and the default
derived serializers are more efficient for that purpose.
This allows:
```lua
local wezterm = require 'wezterm'
return {
keys = {
{key="a", mods="ALT", action=wezterm.action{SendKey={key="b"}}}
},
}
```
to parse: previously, wrapping `SendKey` in `wezterm.action` would fail
to round-trip the the `SendKey` and lead to an error loading the
config.
Rather than hardcode a fixed default value in the config crate, define
the default as optional and leave it to the font crate to compute
the value.
This is a step towards allow introducing system dependent GUI related
code to resolve/understand the title font: we can't put that directly
in the config crate.
There was a discrepancy between leaving it out of the config
and having it partially initialized; fix that up.
Make the default title font size larger on !Windows, as it
looks a bit better.
We might need to make this larger size mac specific.
refs: #1180
Add `get_foreground_process_name` to both Pane and the lua wrapper.
Add `foreground_process_name` and `current_working_dir` fields to
`PaneInformation`. In order for those to be dynamically fetched,
switch the lua conversion for `PaneInformation` to be a UserData
with field access methods. It's a little more verbose but allows
us to lazily compute these two new fields.
refs: https://github.com/wez/wezterm/discussions/1421
refs: https://github.com/wez/wezterm/issues/915
refs: https://github.com/wez/wezterm/issues/876
This is really a timing issue: if shift-click extension of the mouse
selection is used, the user may release the mouse button slightly
after the SHIFT key (which is fine) or vice versa (which was not
previously matched)
refs: #1204
This commit expands quick select mode so that you can trigger it
with distinct sets of patterns (eg: urls on one key assignment,
hashes on a different key assignment), different alphabets,
and lastly, the option to perform a different action from
the default copy action.
You can pair this with `action_callback` to run lua code to
do something with the selected text.
This commit also adds `wezterm.open_with`, a helper function
for opening documents/URLs.
refs: #846
refs: #1362
Adds some plumbing to allow the GUI to implement a download handler
and connect that up for iterm2 image/file transfers that have their
inline property set to false.
Previously we'd just log an error.
Now we will by default download the file to the user's download
directory.
This behavior can be turned off via the new `allow_download_protocols`
configuration setting.
File transfers can be initiated on a remote host via the
https://iterm2.com/utilities/it2dl script.
When the download completes, a toast notification is shown that will
open the file when clicked.
refs: https://github.com/wez/wezterm/discussions/1450
