Allows the following assignment actions; I was just over-using z for
no real reason, I'm not suggesting that these are good assignments.
```
-- move the cursor backwards to the start of the current zone, or
-- to the prior zone if already at the start
{ key = 'z', mods = 'NONE', action = act.CopyMode 'MoveBackwardSemanticZone' },
-- move the cursor forwards to the start of the next zone
{ key = 'Z', mods = 'NONE', action = act.CopyMode 'MoveForwardSemanticZone' },
-- start selecting by zone: both the start point and the cursor
-- position will be expanded to the containing zone and the union
-- of those two will be used for the selection
{
key = 'z',
mods = 'CTRL',
action = act.CopyMode { SetSelectionMode = 'SemanticZone' },
},
-- like MoveBackwardSemanticZone by only considers zones of the
-- specified type
{ key = 'z', mods = 'ALT', action = act.CopyMode { MoveBackwardZoneOfType ='Output' }},
-- like MoveForwardSemanticZone by only considers zones of the
-- specified type
{ key = 'Z', mods = 'ALT', action = act.CopyMode { MoveForwardZoneOfType ='Output' }},
```
refs: https://github.com/wez/wezterm/issues/2346
This makes those fields usable in `wezterm cli list --format json`.
This doesn't change the ABI of the mux protocol, but prior to
this commit, those fields were always 0.
refs: #2319
Adjusts how mouse events are matched so that we can now indicate whether
mouse reporting and alt-screen should be considered as part of the event
trigger criteria.
refs: #2173
refs: #581
This doesn't really change any behavior, but adjusts the types
such that CSIs that set colors have the potential to track the
alpha channel and that can make it through to the GUI/render layer.
The recent work on the scrollback made it easier to constrain the
search region, so expose those parameters to the Pane::search
interface and to the mux protocol.
Use those new parameters to constrain quickselect search to
1000 rows above and below the current viewport by default, and
add a new parameter to QuickSelectArgs that allows overriding that
range.
A follow-up commit could make the search/copy overlay issue a series
of searches in chunks so that it avoids blocking the UI when
searching very large scrollback.
refs: https://github.com/wez/wezterm/pull/1317
In order to avoid searching for "c", "ca", "cat" when typing "cat",
this commit introduces a hard-coded 350ms debounce.
refs: https://github.com/wez/wezterm/issues/1569
If you typed "cat" in the search, the chances are that wezterm
would kick off a search for "c" before you finished typing,
then "ca" and then finally "cat".
There was a race:
clear by_line highlights,
queue search for "c"
clear by_line highlights,
queue search for "ca"
clear by_line highlights,
queue search for "cat"
accumulate highlights for "c" into by_line
accumulate highlights for "ca" into by_line
accumulate highlights for "cat" into by_line
so the final result was a superposition of all of those results,
which was weird!
The fix is simple: clear by_line when we get the results of
an async search.
Adds the option to use an alternative clusted line storage for
the cells component of the line.
This structure is not optimal for mutation, but is better structured
for:
* matching/extracting textual content
* using less memory than the prior simple vector
For some contrast: the line "hello" occupies 5 Cells in the cell based
storage; that 5 discrete Cells each with their own tiny string
and a copy of their attributes.
The clustered version of the line stores one copy of the cell
attributes, the string "hello" and some small (almost constant size)
overhead for some metadata. For simple lines of ascii text, the
clustered version is smaller as there are fewer copies of the cell
attributes. Over the span of a large scrollback and typical terminal
display composition, this saving is anticipated to be significant.
The clustered version is also cheaper to search as it doesn't require
building a copy of the search text for each line (provided the line is
already in clustered form).
This commit introduces the capability: none of the internals request the
new form yet, and there are likely a few call sites that need to be
tweaked to avoid coersion from clustered to vector form.
We didn't actually update the global config, just the per-window
configs, which led to weird stale throwbacks to earlier versions
of the config when spawning windows or new panes.
Fix that up by explicitly reloading the global config when the
window appearance is changed. That isn't ideal as we will reload
once per window, but it's "OK".
While poking at this, I noticed that the get/set config methods
on the termwiztermtab overlay weren't hooked up, and also made
a point of calling those for any overlays during a window config
reload event, so that per-window overrides are more likely to get
picked up and respected.
refs: https://github.com/wez/wezterm/issues/2295
Need to explicitly pop it in front of the tab text layer so that
the button is physically rendered on top of the tab title.
refs: https://github.com/wez/wezterm/issues/2269
This allows the hook to choose how to handle eg: `wezterm start -- top`.
Previously, if you had implemented this event you would essentially lose
the ability to specify a command that you wanted to launch.
refs: https://github.com/wez/wezterm/issues/284
This simplifies the "change scheme based on dark mode" example
a lot. This was previously impossible to do because we didn't
have a lua module associated with the gui until recently, so
the only way to reference a gui-related object was via an
event callback.
refs: https://github.com/wez/wezterm/issues/2258
It can be confusing to see the same log lines when re-opening
the debug overlay, so this commit remembers the last line
in a global to make that feel more natural.
Because that causes the initial `OpenGL Initialized!` log to
show only in the first instance of the overlay, that log line
is now changed to debug level and the overlay will now
explicitly log the version information, along with some
brief usage text:
```
Debug Overlay
wezterm version: 20220714-001416-810512c2
OpenGL version: AMD BEIGE_GOBY (LLVM 14.0.0, DRM 3.46, 5.18.10-200.fc36.x86_64) 4.6 (Compatibility Profile) Mesa 22.1.3
Enter lua statements or expressions and hit Enter.
Press ESC or CTRL-D to exit
```
Attach the mux events to the frontend workspace reconciliation function
so that the window is updated to match the new workspace.
Ensure that we correctly clear out any overlay panes as part of the
switch: we need to remove them from the mux so that the mux will
correctly identify that the mux is empty when the main panes from
the workspace are closed. The problem case was that the debug overlay
state was forgotten by the gui when activating the new workspace, but
we didn't tell the mux to kill it off, so subsequently CTRL-D'ing
the windows closed the windows but left the wezterm process running with
no head.
refs: #2248
We don't really know which of the on-screen matches the user was
looking at when they selected the text, but assume that the one
nearest the bottom of the viewport is the one they want to select,
rather than the one closest to the top.
refs: https://github.com/wez/wezterm/issues/2250
When evaluating an assignment expression like `foo = "bar"` the result
of the expression is nil and we'd print nil on the next line,
which often startles me as I'm used to other languages where the
result of such an expression is the rvalue that was just assigned.
Let's just suppress nil when it is the result of an evaluation
in the repl for a cleaner look.
Otherwise we can block the gui waiting for eg: a freshly opened firefox to
terminate.
See also comment worrying about this in
75066cb522.
That fear was realized but now resolved!
refs: https://github.com/wez/wezterm/issues/2245
The intent is that when set, it changes defaults to something
more suitable for distributions.
I've also added a readme for distro maintainers.
refs: https://github.com/wez/wezterm/issues/1795
Not sure why this only really showed up with Wayland, because the
issue was that the computed tab bar height ended up being 1 or 2
pixels shorter than the area we had allotted.
This commit resolves it by forcing the height to match, and
then aligning the content to the bottom of that region to avoid
having an undesirable line under the tab.
refs: #1256
The fixup callback can now by async, which makes it possible to use
other async functions in the callback.
There is an additional parameter to wezterm.exec_domain that allows
setting the label that is shown in the launcher menu.
It accepts either a string value or an async callback function
that can be used to compute the label dynamically.
An ExecDomain is a variation on WslDomain with the key difference
being that you can control how to map the command that would be
executed.
The idea is that the user can define eg: a domain for a docker
container, or a domain that chooses to run every command in its
own cgroup.
The example below shows a really crappy implementation as a
demonstration:
```
local wezterm = require 'wezterm'
return {
exec_domains = {
-- Commands executed in the woot domain have "WOOT" echoed
-- first and are then run via bash.
-- `cmd` is a SpawnCommand
wezterm.exec_domain("woot", function(cmd)
if cmd.args then
cmd.args = {
"bash",
"-c",
"echo WOOT && " .. wezterm.shell_join_args(cmd.args)
}
end
-- you must return the SpawnCommand that will be run
return cmd
end),
},
default_domain = "woot",
}
```
This commit unfortunately does more than should go into a single
commit, but I'm a bit too lazy to wrangle splitting it up.
* Reverts the nil/null stuff from #2177 and makes the
`ExtendSelectionToMouseCursor` parameter mandatory to dodge
a whole load of urgh around nil in table values. That is
necessary because SpawnCommand uses optional fields and the
userdata proxy was making that a PITA.
* Adds some shell quoting helper functions
* Adds ExecDomain itself, which is really just a way to
to run a callback to fixup the command that will be run.
That command is converted to a SpawnCommand for the callback
to process in lua and return an adjusted version of it,
then converted back to a command builder for execution.
refs: https://github.com/wez/wezterm/issues/1776
You can start a window in full screen mode using something like:
```lua
local wezterm = require 'wezterm'
local mux = wezterm.mux
wezterm.on("gui-startup", function()
local tab, pane, window = mux.spawn_window{}
window:gui_window():toggle_fullscreen()
end)
return {
}
```
refs: #177
refs: #284
reconciling causes gui windows to be created and allows for stuff like
this, that would otherwise fail because the gui window hadn't been
created yet.
```lua
local wezterm = require 'wezterm'
local mux = wezterm.mux
wezterm.on("gui-startup", function()
local tab, pane, window = mux.spawn_window{}
window:gui_window():set_inner_size(1200, 1200)
end)
return {
}
```
Currently implemented on X11 only, this function returns information
about the geometry of the screen(s).
This is taken from the same source of information we use for the
`--position` CLI argument to `wezterm start`.
```
> wezterm.window.screens()
{
"by_name": {
"DisplayPort-1": {
"height": 2160,
"name": "DisplayPort-1",
"width": 3840,
"x": 0,
"y": 0,
},
},
"main": {
"height": 2160,
"name": "DisplayPort-1",
"width": 3840,
"x": 0,
"y": 0,
},
"origin_x": 0,
"origin_y": 0,
"virtual_height": 2160,
"virtual_width": 3840,
}
```
This commit adjusts the config loading code so that we can return
information about the paths the should be watched for a subsequent
reload even in the more common error cases.
refs: #1174
This is a bit of an unsatisfactory commit... the bulk of it is
augmenting our calls into XCB to ensure that we check the status of each
request; the idea was that doing so would highlight the source of the
bad drawable error that is being surfaced in #2198, but after doing
that, it still doesn't highlight the offending call.
My conclusion is that either something in MESA/EGL or the IME is
generating calls that we cannot see into and that one of those is
referencing the window id that we just destroyed.
The resolution then is a bit gross: instead of destroying the window
when we need to close it, we first unmap it to remove it from the
screen, then after 2 seconds we destroy it.
refs: https://github.com/wez/wezterm/issues/2198
We need the mux window builder to notify in order for the ConnectionUI
to show up, but we wouldn't trigger the notify (which happens on drop)
until we'd awaited the connection ui completing password auth.
Force it to drop earlier to unblock.
refs: https://github.com/wez/wezterm/issues/2194
Previously, the mux layer had no internal understanding of titles other
than the Pane::get_title method to return state from a pane.
Users have asked for ways to explicitly set titles on windows and tabs,
so this commit is a step towards that.
The mux window and tab objects now store a title string.
The terminal layer now emits Alert::WindowTitleChanged when the window
title is changed via eg: OSC 0 or OSC 2.
The mux layer will respond to Alert::WindowTitleChanged by resolving the
window that corresponds to the source pane and amending its title.
The MuxWindow and MuxTab objects now provide accessor methods for the
title.
TabInformation (as used by format-tab-title and format-window-title) now
exposes the underlying window_id as well as tab_title and window_title.
The tab title can be changed via the lua MuxTab type, but there is not
currently an escape sequence associated with this.
The defaults for format-tab-title and format-window-title don't
currently consider these new title strings.
refs: https://github.com/wez/wezterm/issues/1598
Previously, trying to do something like `foo = "bar"` in the debug
overlay wouldn't succeed, because we were always trying to wrap
the line inside `return {line}`, which allowed for only expressions
to be used.
Now we also allow a fully formed statement to be used, which means
that that kind of assignment can be performed in the repl, making
it a bit more convenient to try stuff out.
refs: https://github.com/wez/wezterm/issues/1238
Using the newly exposed-to-lua mux apis, you may now run some lua code
at GUI startup and/or mux startup, just prior to any default windows
being created.
If you happen to spawn any panes as a result of this, wezterm will
skip creating the default program.
```lua
local wezterm = require 'wezterm'
local mux = wezterm.mux
-- This produces a window split horizontally into three equal parts
wezterm.on("gui-startup", function()
wezterm.log_info("doing gui startup")
local tab, pane, window = mux.spawn_window{}
mux.split_pane(pane, {size=0.3})
mux.split_pane(pane, {size=0.5})
end)
wezterm.on("mux-startup", function()
wezterm.log_info("doing mux startup")
local tab, pane, window = mux.spawn_window{}
mux.split_pane(pane, {size=0.5, direction="Top"})
end)
return {
unix_domains = {
{name="unix"}
},
}
```
refs: #674
refs: #1949
The intent is to expose Mux related functions to lua, so `wezterm.mux`
will be that module table.
In order to test this out in the debug overlay, I realized that the
overlay was running functions in a different thread and didn't have
access to the mux, so this commit also tweaks the debug overlay repl to
execute the input in the main thread.
The result is that it is now possible to do
`wezterm.mux.active_workspace()` in the debug overlay to print the
active workspace name.
More functions will follow.
refs: https://github.com/wez/wezterm/issues/225
Main thing to note here is that the open crate has deprecated
open::that_in_background, but made open::that non-blocking.
I think this is OK, but I'm a little cagey about what will
happen with this on Windows. We may need to spawn our own
thread for this if things go awry.
I did an ad-hoc test where I set the new tab button background to
an Animated value and saw that it eased in and out.
However, this commit doesn't make anything use this yet.
This is prep for future work where I'll be moving more of the main
monospace rendering into the box model code and factoring out
this aspect of animation.
Useful if you want to add smaller items to your background layers
every so often; you can specify the distance between them and make
it independent of the item height.
The color can have alpha and blend with other layers.
This is helpful if your image has fully transparent portions
and you want to explicitly place a color in there.
The `File` variant for background layers may now be an object
that specifes a speed factor. That factor is applied to the
animation frame durations in the loaded image, allowing the
playback rate to be adjusted.
Adjusts the background rendering logic so that we now allocate
a render layer for each defined background layer. This allows
their individual opacity value to multiple and blend together.
As part of this, I noticed that the big jpegs I was using could
take 400ms or more to load, so I added a basic cache to avoid
loading the same image multiple times around a config reload.
This adds some types that will enable richer background images.
* Can specify multiple layers
* Each layer can select from image files or gradient definitions
* Layers have additional properties to specify positioning, scaling,
tiling and whether they scroll with the viewport.
None of the additional properties are hooked up yet.
This commit allows for the SplitPane internal action to use the
pane id of an existing pane as the source of the pane to be added
in the new split target, rather than spawning a new command.
This can be used to move a pane from one tab to another, and is
analagous to tmux's `join-pane` command.
refs: https://github.com/wez/wezterm/discussions/2043
refs: https://github.com/wez/wezterm/issues/1253
Make the layer allocation more dynamic, which makes it
possible for the box model stuff to allocate a layer based
on the zindex for an element.
Adjust the box model code to cascade the base zindex via
the layer context so that the render stage can select
the correct layer.
This fixes up rendering tabs over the top of the right status
area.
Wraps up the changes from the following diff and allows for the modal
layer (and box model) to use alpha for poly quads.
Change the default background color for pane select to be slightly
transparent.
Each layer has the same 3-pass draw that we use for the main terminal
display.
These layers allow for potentially compositing between the layers.
That is untested at the moment as the upper layers use the box model
stuff which hard-codes its work to the vb index 1 which doesn't
use regular alpha blending.
This is still a bit of a WIP, but this commit:
* Introduces a new "Modal" concept to the GUI layer. The intent is
that modal intercepts key and mouse events while active, and renders
over the top of the rest of the normal display.
I think there might be a couple of cases where key events skirt
through this, but this is good enough as a first step.
Also, the render is forced into layer 1 which has some funny side
effects: if the modal choses to render transparent, it will poke
a hole in the window because all the rendering happens together:
there aren't distinct layer compositing passes.
* Add a new PaneSelect action that is implemented as a modal.
It uses quickselect style alphabet -> pane label generation and
renders the labels over ~the middle of each pane using an
enlarged version of the window frame font. Typing the label
will activate that pane. Escape will cancel the modal.
More styling and docs will follow in a later commit.
refs: #1975
This, along with the plumbing included here, allows specifying
the destination of the split (now you can specify top/left, whereas
previously it was limited to right/bottom), as well as the size
of the split, and also whether the split targets the node at the
top level of the tab rather than the active pane--that is referred
to as full-width in tmux terminology.
https://github.com/wez/wezterm/issues/578
Invalid option names, or values that evaluate as nil (such as the `foo`
above: that's treated as a global variable reference, but `foo` isn't a
defined global and evaluates as `nil`) will now cause the program
startup to error out with an actionable error message.
Previously, the invalid config name would generate a warning, and the
invalid value would silently have no effect as it has the same effect as
omitting the named value and leaving it as its default value.
I think these cases should both immediately error out and stop
further processing, so that's what we're doing.
This commit also adds support for adding:
```
#[dynamic(deprecated = "use newer option instead")]
pub some_config_value: bool,
```
but not options currently use this.
To do this, we split `Pattern` into the underlying pattern for the mux
layer (which is part of the codec), and another for the config layer,
so that we can specify this new mode.
At the gui layer, we translate the selection variant into the actual
selection text and map it to the mux Pattern enum.
When taking the selection text, we restrict it to just the first line.
refs: https://github.com/wez/wezterm/issues/1912
Turn on multi-line mode by default, and improve the localpane
search function to collapse runs of trailing whitespace into
just a newline.
That allows:
```
./target/debug/wezterm -n --config 'quick_select_patterns={"foo$"}'
```
to match the first line from this, but not the second:
```
printf "foo\nfoobar\n"
```
and this to match both:
```
./target/debug/wezterm -n --config 'quick_select_patterns={"^foo"}'
```
refs: https://github.com/wez/wezterm/issues/2008
Avoid using serde for mapping between Lua and Rust for the `Config`
struct.
This improves the build speed of the config crate by 2x; it goes down
from 30 seconds to 9 seconds on my 5950x.
fixes:
* beginning the selection with the top right or bottom left corner
* beginning the selection with the bottom right corner and only select a single line
The issue here was that we'd try to match this:
```
key_event RawKeyEvent { key: Char('t'), modifiers: ALT | LEFT_ALT, phys_code: Some(T), raw_code: 17, repeat_count: 1, key_is_down: true, handled: Handled(false) }
```
which has mods=`ALT|LEFT_ALT` against `ALT` and would fail.
We need to strip out the positional ALTs from the modifiers
in order to successfully match.
refs: https://github.com/wez/wezterm/issues/1958
This commit re-arranges the code so that an overlay can have a local
stack of key table activations; this allows copy_mode and search_mode
key tables to layer on top of the user's window level key tables.
Previously, we'd just stick the search_mode entry on top of the global
state, which worked, but had the undesirable side effect of hijacking
the Enter key when switching to another tab in the window.
refs: https://github.com/wez/wezterm/issues/993
The copy overlay now has a notion of running in search mode vs. copy
mode; it can be launched in either mode.
Search mode has a separate key table called `search_mode`.
Activating copy mode while search mode is active will now update
the mode of the existing overlay, rather than cancelling and creating
a new instance, and vice versa.
Activating copy mode while search mode is active will replace the
current key table activation (which is assumed to be `copy_mode`)
with `search_mode`, and vice versa.
The viewport is no longer scrolled to the bottom when activating search
mode.
refs: https://github.com/wez/wezterm/issues/993
refs: https://github.com/wez/wezterm/issues/1592
This change causes key table activations to effectively layer
over prior key table activations.
This is necessary for the copy mode key assignment changes to
work.
refs: https://github.com/wez/wezterm/issues/993
Moves the key handling in the copy overlay to be driven entirely
by configurable key assignments.
Note: copy mode wants you to use the `Copy` assignment to actually
do the copy, but this implementation hides the normal key assignments
by activating the copy mode key table. This will be addressed
in the following commit.
refs: https://github.com/wez/wezterm/issues/993
The launcher menu code to perform attaching has been generalized
into a key assignment action and reimplemented in terms of that
action.
A detach action has been added to disconnect and detach.
refs: https://github.com/wez/wezterm/issues/1874
If we had previously killed all the panes in a remote mux,
and then reconnected to it using the launcher menu attach option,
we could end up in a confusing state where we connect but don't
show anything for the remote; it looks like nothing happened
even though it is legitimately showing the empty remote mux.
This commit checks for that case and spawns the default program
in the remote if there are no panes.
This commit allows the currently active window to:
* Spawn a new tab in the active window (rather than spawning
a new window) to host the connection status
* Auto-close that connection UI tab (rather than the whole window)
when the window is no longer needed
* Pass the current window through to use as the primary window when
assigning remote window/tabs.
The net effect of this is that there are fewer transient windows,
and that it is easier to connect a set of domains to the active
workspace.
refs: https://github.com/wez/wezterm/issues/1874
When the screen is cleared/reset, the physical top is not reset with it,
instead the scrollback_top variable gets set with the point at which the
screen was reset / you are allowed to scroll back to. The scroll bar
code wasn't aware of that.
refs: https://github.com/wez/wezterm/issues/1866
Create a list of command definitions to hold the default key
assignments.
That list has more metadata, such as a brief and longer human
readable description of the purpose, and allows for (in the
future) reasoning about the context where the command is valid,
as well as providing more information when rendering in the
launcher menu.
refs: https://github.com/wez/wezterm/issues/1485
The heart of the issue here was due to the window-reuse logic that
tries to reuse a GUI window that is no longer associated with a mux
window.
Each GUI window subscribes to the mux for mux events, but it filters
according to is understanding of the mux_window_id that it is associated
with.
The GUI frontend maintains an mapping of GUI and mux window so that it
knows when to reuse a GUI window and when to close it.
When connecting to a remote mux, wezterm spawns a temporary connection
progress window. Once connected, workspace reconiliation is triggered
and decides that this window can be used for something else.
As part of workspace reconciliation, this mapping can be adjusted and
the frontend will notify a GUI window that its mux window has changed.
However, that updated mux window was not visible to the mux notification
subscription so the effect was that a variety of notifications were
effectively ignored, including updates from a remote mux when the output
was changed.
To make matters worse, the workspace reconciliation could "double-tap"
window creation and create excess windows only to later realize they
weren't needed and close them out again.
This commit addresses both of these concerns.
refs: #1841
refs: #1814
We're now capable of remembering an alpha value for everything
in the palette and the main window theme, but not the tab bar theme.
Whether the alpha is correctly respected at render time is a different
story!
refs: #1835
The bug here was that each paint call in a window would update
the focus state of its panes to reflect the one that had focus.
However, it didn't account for the actual window focus; it would
just assume that it was focused.
The result was that the perceived focus would alternate between each of
the windows in the wezterm process, and if you were running an
application that had enabled focus tracking, those events could cause a
repaint and drive up the CPU utilization.
This commit addresses that by gating the focus update to only occur
when we have the focus, and for extra safety, avoid generating focus
events at the terminal layer if the new state matches the current state.
refs: https://github.com/wez/wezterm/issues/1838
I wanted to use the Target::Pipe feature of env_logger so that we could
log to a log file as well as stderr, but it just doesn't work
(https://github.com/env-logger-rs/env_logger/issues/208).
Since we were already composing over the top of the logger in order
to capture data for our ringlog, this commit embraces that and makes
our logger responsible for both stderr and log file printing.
Thankfully, we can use the filter parsing code from env_logger to
avoid having to get too crazy with this.
Logs are stored in the runtime directory and look something like:
/run/user/1000/wezterm/wezterm-gui-log-596324.txt
Logs are collected on all platforms.
There isn't currently a thing to clean up logs.
Go directly to the underlying env_logger crate, as pretty_env_logger
hasn't been updated in some time, and I'd like to be able to redirect
the log output to a file more directly, and that feature is in a newer
version of the env logger than pretty_env_logger was pulling in.
This is definitely in the band-aid category, but two issues have
mentioned the AA in custom block glyphs recently.
This commit adds an `anti_alias_custom_block_glyphs` option that can be
set to false to prevent the custom block glyphs from enabling AA.
I think a better long term fix would be some kind of hinting to avoid
the degenerate AA case, but when I made an enquiry about this class of
issue in tiny skia in the past, the author didn't want to diverge from
skia-compatible behavior, so I think we'd need to find (or build!) an
alternative rasterizer for these path instructions.
refs: https://github.com/wez/wezterm/issues/1753
refs: #1817
To fix this correctly, the mux protocol would need to have some
special cases for talk to a gui server implementation, and we don't
have those today.
refs: #1794
The glium IncompatibleOpenGl Display doesn't include any of the
useful context to explain what the issue was, so this commit
renders the error both in human friendly and Debug form to
see if we can understand more about what is happening.
refs: https://github.com/wez/wezterm/issues/1813
* gui: improve mouse text selection
* implement mouse press capture between the terminal and UI, so when you
start selecting text from the terminal the tabs won't activate and
vice-versa
* selecting from the top and bottom lines won't scroll the viewport
anymore, it will only scroll if the mouse is moved out of line bounds
* change cell selection so that it behaves like text selection usually
does in other popular software
refs: https://github.com/wez/wezterm/issues/1199
refs: https://github.com/wez/wezterm/issues/1386
refs: https://github.com/wez/wezterm/issues/354
`ActivateKeyTable` pushes a new named key table entry onto the stack.
It has some parameters:
* name - required; the name of a entry in `key_tables` that should be
activated.
* timeout_milliseconds - how long the entry should remain active.
When this duration elapses, the entry will pop itself from the
stack. If omitted, the entry will not pop itself due to time.
* one_shot - if true (or omitted; true is default), the entry will pop
itself after one use. If false the entry will not pop itself after use.
But note that if timeout_milliseconds is set then it may pop itself
due to time.
* replace_current - if true, will pop the current stack entry before
activating the current entry. Most useful when combined with some
other one_shot=false activation.
`PopKeyTable` explicitly pops the top of the key table stack.
Most useful with `one_shot=false` activations.
`ClearKeyTableStack` clears the key table stack. Most useful with
`one_shot=false` activations.
```
local wezterm = require 'wezterm';
wezterm.on("update-right-status", function(window, pane)
local name = window:active_key_table()
if name then
name = "TABLE: " .. name
end
window:set_right_status(name or "")
end);
return {
debug_key_events = true,
keys = {
-- Activate the "woot" table as a one-shot with
-- a 2 second timeout, after which it will restore
-- the default table.
{
key="a", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
timeout_milliseconds=2000,
}
}
},
-- Activate the "woot" table.
-- The table will remain active until explicitly popped
-- by the `PopKeyTable` action. See the Escape binding below!
{
key="b", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
one_shot = false,
}
}
},
-- Activate the "woot" table as a one-shot with
-- no timeout. It will remain active until a key is pressed,
-- after which is will restore the default table.
{
key="c", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
}
}
},
},
key_tables = {
woot = {
{key="a", action=wezterm.action{SendString="woot"}},
{key="Escape", action="PopKeyTable"},
},
},
}
```
This commit introduces a new `key_tables` config option that allows
defining named groups of key assignments, but that have no effect yet.
To support this change, the InputMap type has been adjusted to allow
for the idea that multiple tables can exist.
refs: https://github.com/wez/wezterm/discussions/1812
The gist of the issue is that when setting eg: scale=1.2 to draw
a larger CJK glyph, it is drawn at the same descender level, which
makes it more likely to leave the top of the cell.
This commit adjusts the y position by the difference between the
original and the scaled descender so that is less likely to cause
problems.
refs: https://github.com/wez/wezterm/issues/1803
This is mostly a refactoring: pulling out the discrete width/height from
the `new_window` method and preparing to pass down x/y coords as well.
The types are expressed as Dimension so that screen relative sizes could
be expressed in the future... once we know how to obtain that
information on each platform.
refs: https://github.com/wez/wezterm/issues/1794
The tab bar height could vary by a couple of pixels depending on the
text shown inside it, which results in visual jitter as the title bar
changes.
Avoid that: always return our constant reserved amount of space for the
tab bar, even if it means that there are a couple of pixels "wasted".
cc: @davidrios
A bit of a PITA, this commit:
* Introduces a DeferredKeyCode type that defers resolving a concrete
keycode
* Adds key_map_preference config which can be Mapped or Physical
* Key map building resolves the keycode using key_map_preference
* Default key assignments have been re-phrased in order to produce
DeferredKeyCodes
* User-specified keys without `mapped:` or `phys:` prefixes will
resolve according to key_map_preference
refs: https://github.com/wez/wezterm/issues/1788
refs: https://github.com/wez/wezterm/issues/1784
Previously, we'd create a clipboard handler associated with a GUI window
and take care to pass that down to the underlying Pane whenever we
spawned a new pane.
For the mux server, instead of being associated with a GUI window, the
clipboard was a special RemoteClipboard that would send a PDU through
to the client that spawned the window.
The bug here was that when that client went away, the clipboard for
that window was broken.
If the mux server was the built-in mux in a gui process this could
leave a tab without working OSC 52 clipboard support.
This commit restructures things so that the Mux is responsible for
assigning a clipboard handler that rephrases the clipboard event
as a MuxNotification.
Both the GUI frontend and the mux server dispatcher already listen
for mux notifications and translate those events into appropriate
operations on the system clipboard or Pdus to send to the client(s).
refs: #1790
In https://github.com/wez/wezterm/pull/1779#issuecomment-1082058134 we
discuss a weird case where the tab bar height is computed as 0 and then
gets stuck at 0.
What's happening is that the initial `TabBarState::default()` value has
no items yet, and `build_fancy_tab` generates an area that occupies 0
pixels. This computed element is cached, and then the height from that
is cached.
When `invalidate_fancy_tab` is called, it didn't invalidate the cached
height and the resultant metrics were wonky.
One possible fix for this was to also invalidate the cached height,
but since that height is already stored in the built fancy tab,
we can remove that derived-cached value in favor of just passing
down the value.
refs: https://github.com/wez/wezterm/pull/1779
