wezterm/docs/config/appearance.md

Color Scheme

WezTerm ships with the full set of over 200 color schemes available from iTerm2-Color-Schemes. You can select a color scheme with a line like this:

return {
  color_scheme = "Batman",
}

You can find a list of available color schemes and screenshots in The Color Schemes Section.

The color_scheme option takes precedence over the colors section below.

Defining your own colors

Rather than using a color scheme, you can specify the color palette using the colors configuration section. Note that color_scheme takes precedence over this section.

You can configure colors with a section like this. In addition to specifying SVG/CSS3 color names, you can use #RRGGBB to specify a color code using the usual hex notation; eg: #000000 is equivalent to black:

return {
  colors = {
      -- The default text color
      foreground = "silver",
      -- The default background color
      background = "black",

      -- Overrides the cell background color when the current cell is occupied by the
      -- cursor and the cursor style is set to Block
      cursor_bg = "#52ad70",
      -- Overrides the text color when the current cell is occupied by the cursor
      cursor_fg = "black",
      -- Specifies the border color of the cursor when the cursor style is set to Block,
      -- or the color of the vertical or horizontal bar when the cursor style is set to
      -- Bar or Underline.
      cursor_border = "#52ad70",

      -- the foreground color of selected text
      selection_fg = "black",
      -- the background color of selected text
      selection_bg = "#fffacd",

      -- The color of the scrollbar "thumb"; the portion that represents the current viewport
      scrollbar_thumb = "#222222",

      -- The color of the split lines between panes
      split = "#444444",

      ansi = {"black", "maroon", "green", "olive", "navy", "purple", "teal", "silver"},
      brights = {"grey", "red", "lime", "yellow", "blue", "fuchsia", "aqua", "white"},

      -- Arbitrary colors of the palette in the range from 16 to 255
      indexed = {[136] = "#af8700"},

      -- Since: 20220319-142410-0fcdea07
      -- When the IME, a dead key or a leader key are being processed and are effectively
      -- holding input pending the result of input composition, change the cursor
      -- to this color to give a visual cue about the compose state.
      compose_cursor = "orange",
  }
}

Since: 20220101-133340-7edc5b5a

You may specify colors in the HSL color space, if you prefer that over RGB, by using:

return {
  colors = {
      -- the first number is the hue measured in degrees with a range
      -- of 0-360.
      -- The second number is the saturation measured in percentage with
      -- a range of 0-100.
      -- The third number is the lightness measured in percentage with
      -- a range of 0-100.
      foreground = "hsl:235 100 50",
  }
}

Since: 20220319-142410-0fcdea07

Colors now also accept the following CSS-style color specifications:

#00ff00ff
rgb(0,255,0)
rgb(0% 100% 0%)
rgb(0 255 0 / 100%)
rgba(0,255,0,1)
hsl(120,100%,50%)
hsl(120deg 100% 50%)
hsl(-240 100% 50%)
hsl(-240deg 100% 50%)
hsl(0.3333turn 100% 50%)
hsl(133.333grad 100% 50%)
hsl(2.0944rad 100% 50%)
hsla(120,100%,50%,100%)
hwb(120 0% 0%)
hwb(480deg 0% 0% / 100%)
hsv(120,100%,100%)
hsv(120deg 100% 100% / 100%)

The alpha value is ignored except when used with selection_fg and selection_bg:

return {
  colors = {
    -- Make the selection text color fully transparent.
    -- When fully transparent, the current text color will be used.
    selection_fg = "none",
    -- Set the selection background color with alpha.
    -- When selection_bg is transparent, it will be alpha blended over
    -- the current cell background color, rather than replace it
    selection_bg = "rgba(50% 50% 50% 50%)"
  }
}

Defining a Color Scheme in your .wezterm.lua

If you'd like to keep a couple of color schemes handy in your configuration file, rather than filling out the colors section, place it in a color_schemes section as shown below; you can then reference it using the color_scheme setting.

Color schemes names that you define in your wezterm.lua take precedence over all other color schemes.

All of the settings available from the colors section are available to use in the color_schemes sections.

return {
  color_scheme = "Red Scheme",

  color_schemes = {
    ["Red Scheme"] = {
      background = "red",
    }
    ["Blue Scheme"] = {
      background = "blue",
    }
  },
}

See also wezterm.get_builtin_color_schemes() for some more advanced examples, such as picking a random color scheme, or deriving from a builting color scheme.

Defining a Color Scheme in a separate file

If you'd like to factor your color schemes out into separate files, you can create a file with a [colors] section; take a look at one of the available color schemes for an example.

It is recommended that you place your custom scheme in a directory named $HOME/.config/wezterm/colors if you're on a POSIX system.

On a Windows system, wezterm will search for schemes in a directory named colors that is in the same directory as the wezterm.exe.

If you wish to place your color scheme files in some other location, then you will need to instruct wezterm where to look for your scheme files; the color_scheme_dirs setting specifies a list of directories to be searched:

return {
  color_scheme_dirs = {"/some/path/to/my/color/schemes"},
}

Color scheme names that are defined in files in your color_scheme_dirs list take precedence over the built-in color schemes.

Dynamic Color Escape Sequences

Wezterm supports dynamically changing its color palette via escape sequences.

The dynamic-colors directory of the color scheme repo contains shell scripts that can change the color scheme immediately on the fly. This can be used in your own scripts to alter the terminal appearance programmatically:

$ git clone https://github.com/mbadolato/iTerm2-Color-Schemes.git
$ cd iTerm2-Color-Schemes/dynamic-colors
$ for scheme in *.sh ; do ; echo $scheme ; \
   bash "$scheme" ; ../tools/screenshotTable.sh; sleep 0.5; done

Tab Bar Appearance & Colors

The tab bar has two modes; the default is a native looking style, but is is also possible to enable a retro aesthetic. The configuration for the two styles is broadly similar, but there are a few different details.

• use_fancy_tab_bar option controls which tab bar style is used.
• enable_tab_bar option control whether the tab bar is used at all.
• hide_tab_bar_if_only_one_tab option causes the tab bar to be hidden when there is only a single tab.
• tab_bar_at_bottom places the tab bar at the bottom of the window instead of the top
• tab_max_width sets the maximum width, measured in cells, of a given tab when using retro tab mode.

Native (Fancy) Tab Bar appearance

The following options affect the fancy tab bar:

local wezterm = require 'wezterm'

return {
  window_frame = {
    -- The font used in the tab bar.
    -- Roboto Bold is the default; this font is bundled
    -- with wezterm.
    -- Whatever font is selected here, it will have the
    -- main font setting appended to it to pick up any
    -- fallback fonts you may have used there.
    font = wezterm.font({family="Roboto", weight="Bold"}),

    -- The size of the font in the tab bar.
    -- Default to 10. on Windows but 12.0 on other systems
    font_size = 12.0,

    -- The overall background color of the tab bar when
    -- the window is focused
    active_titlebar_bg = "#333333",

    -- The overall background color of the tab bar when
    -- the window is not focused
    inactive_titlebar_bg = "#333333",
  },

  colors = {
    tab_bar = {
      -- The color of the inactive tab bar edge/divider
      inactive_tab_edge = "#575757",
    },
  },
}

In addition, the tab bar colors mentioned below also apply to the items displayed in the tab bar.

Retro Tab Bar appearance

The following options control the appearance of the tab bar:

return {
  colors = {
    tab_bar = {
      -- The color of the strip that goes along the top of the window
      -- (does not apply when fancy tab bar is in use)
      background = "#0b0022",

      -- The active tab is the one that has focus in the window
      active_tab = {
        -- The color of the background area for the tab
        bg_color = "#2b2042",
        -- The color of the text for the tab
        fg_color = "#c0c0c0",

        -- Specify whether you want "Half", "Normal" or "Bold" intensity for the
        -- label shown for this tab.
        -- The default is "Normal"
        intensity = "Normal",

        -- Specify whether you want "None", "Single" or "Double" underline for
        -- label shown for this tab.
        -- The default is "None"
        underline = "None",

        -- Specify whether you want the text to be italic (true) or not (false)
        -- for this tab.  The default is false.
        italic = false,

        -- Specify whether you want the text to be rendered with strikethrough (true)
        -- or not for this tab.  The default is false.
        strikethrough = false,
      },

      -- Inactive tabs are the tabs that do not have focus
      inactive_tab = {
        bg_color = "#1b1032",
        fg_color = "#808080",

        -- The same options that were listed under the `active_tab` section above
        -- can also be used for `inactive_tab`.
      },

      -- You can configure some alternate styling when the mouse pointer
      -- moves over inactive tabs
      inactive_tab_hover = {
        bg_color = "#3b3052",
        fg_color = "#909090",
        italic = true,

        -- The same options that were listed under the `active_tab` section above
        -- can also be used for `inactive_tab_hover`.
      },

      -- The new tab button that let you create new tabs
      new_tab = {
        bg_color = "#1b1032",
        fg_color = "#808080",

        -- The same options that were listed under the `active_tab` section above
        -- can also be used for `new_tab`.
      },

      -- You can configure some alternate styling when the mouse pointer
      -- moves over the new tab button
      new_tab_hover = {
        bg_color = "#3b3052",
        fg_color = "#909090",
        italic = true,

        -- The same options that were listed under the `active_tab` section above
        -- can also be used for `new_tab_hover`.
      }
    }
  }
}

Window Padding

You may add padding around the edges of the terminal area.

See the window_padding docs for more info

Styling Inactive Panes

since: 20201031-154415-9614e117

To make it easier to see which pane is active, the inactive panes are dimmed and de-saturated slightly.

You can specify your own transformation to the pane colors with a hue, saturation, brightness (HSB) multipler.

In this example, inactive panes will be slightly de-saturated and dimmed; this is the default configuration:

return {
  inactive_pane_hsb = {
    saturation = 0.9,
    brightness = 0.8,
  }
}

The transform works by converting the RGB colors to HSV values and then multiplying the HSV by the numbers specified in inactive_pane_hsb.

Modifying the hue changes the hue of the color by rotating it through the color wheel. It is not as useful as the other components, but is available "for free" as part of the colorspace conversion.

Modifying the saturation can add or reduce the amount of "colorfulness". Making the value smaller can make it appear more washed out.

Modifying the brightness can be used to dim or increase the perceived amount of light.

The range of these values is 0.0 and up; they are used to multiply the existing values, so the default of 1.0 preserves the existing component, whilst 0.5 will reduce it by half, and 2.0 will double the value.

Window Background Image

since: 20201031-154415-9614e117

You can attach an image to the background of the wezterm window:

return {
  window_background_image = "/path/to/wallpaper.jpg"
}

If the path is a relative path then it will be expanded relative to the directory containing your wezterm.lua config file.

PNG, JPEG, GIF, BMP, ICO, TIFF, PNM, DDS, TGA and farbfeld files can be loaded. Animated GIF and PNG files will animate while the window has focus.

The image will be scaled to fit the window contents. Very large images may decrease render performance and take up VRAM from the GPU, so you may wish to resize the image file before using it.

You can optionally transform the background image by specifying a hue, saturation, brightness multiplier:

return {
  window_background_image = "/path/to/wallpaper.jpg",

  window_background_image_hsb = {
    -- Darken the background image by reducing it to 1/3rd
    brightness = 0.3,

    -- You can adjust the hue by scaling its value.
    -- a multiplier of 1.0 leaves the value unchanged.
    hue = 1.0,

    -- You can adjust the saturation also.
    saturation = 1.0,
  },
}

See Styling Inactive Panes for more information on hue, saturation, brigthness transformations.

Window Background Gradient

Since: 20210814-124438-54e29167

See window_background_gradient for configuration information on gradients.

Window Background Opacity

since: 20201031-154415-9614e117

If your Operating System provides Compositing support then WezTerm is able to specify the alpha channel value for the background content, rendering the window background translucent (some refer to this as transparent rather than translucent) and causing the windows/desktop behind it to show through the window.

macOS, Windows and Wayland support compositing out of the box. X11 may require installing or configuring a compositing window manager. XWayland under Mutter/Wayland also works without any additional configuration.

window_background_opacity specifies the alpha channel value with floating point numbers in the range 0.0 (meaning completely translucent/transparent) through to 1.0 (meaning completely opaque).

Setting this to a value other than the default 1.0 may impact render performance.

return {
  window_background_opacity = 1.0,
}

Text Background Opacity

since: 20201031-154415-9614e117

When using a background image or background opacity, the image content can have relatively low contrast with respect to the text you are trying to read in your terminal.

The text_background_opacity setting specifies the alpha channel value to use for the background color of cells other than the default background color.

The default for this setting is 1.0, which means that the background color is fully opaque.

The range of values permitted are 0.0 (completely translucent) through to 1.0 (completely opaque).

return {
  text_background_opacity = 0.3,
}