wezterm/docs/config/appearance.markdown

Color Scheme

WezTerm ships with the full set of over 200 color schemes available from iTerm2-Color-Schemes. You can select a color scheme with a line like this:

return {
  color_scheme = "Batman",
}

You can find a list of available color schemes and screenshots in The Color Schemes Section.

The color_scheme option takes precedence over the colors section below.

Defining your own colors

Rather than using a color scheme, you can specify the color palette using the colors configuration section. Note that color_scheme takes precedence over this section.

You can configure colors with a section like this. In addition to specifying SVG/CSS3 color names, you can use #RRGGBB to specify a color code using the usual hex notation; eg: #000000 is equivalent to black:

return {
  colors = {
      -- The default text color
      foreground = "silver",
      -- The default background color
      background = "black",

      -- Overrides the cell background color when the current cell is occupied by the
      -- cursor and the cursor style is set to Block
      cursor_bg = "#52ad70",
      -- Overrides the text color when the current cell is occupied by the cursor
      cursor_fg = "black",
      -- Specifies the border color of the cursor when the cursor style is set to Block,
      -- of the color of the vertical or horizontal bar when the cursor style is set to
      -- Bar or Underline.
      cursor_border = "#52ad70",

      -- The color of the scrollbar "thumb"; the portion that represents the current viewport
      scrollbar_thumb = "#222222",

      -- The color of the split lines between panes
      split = "#444444",

      ansi = {"black", "maroon", "green", "olive", "navy", "purple", "teal", "silver"},
      brights = {"grey", "red", "lime", "yellow", "blue", "fuchsia", "aqua", "white"},
  }
}

Defining a Color Scheme in your .wezterm.lua

If you'd like to keep a couple of color schemes handy in your configuration file, rather than filling out the colors section, place it in a color_schemes section as shown below; you can then reference it using the color_scheme setting.

Color schemes names that you define in your wezterm.lua take precedence over all other color schemes.

All of the settings available from the colors section are available to use in the color_schemes sections.

return {
  color_scheme = "Red Scheme",

  color_schemes = {
    ["Red Scheme"] = {
      background = "red",
    }
    ["Blue Scheme"] = {
      background = "blue",
    }
  },
}

Defining a Color Scheme in a separate file

If you'd like to factor your color schemes out into separate files, you can create a file with a [colors] section; take a look at one of the available color schemes for an example.

You then need to instruct wezterm where to look for your scheme files; the color_scheme_dirs setting specifies a list of directories to be searched:

return {
  color_scheme_dirs = {"/some/path/to/my/color/schemes"},
}

Color scheme names that are defined in files in your color_scheme_dirs list take precedence over the built-in color schemes.

Dynamic Color Escape Sequences

Wezterm supports dynamically changing its color palette via escape sequences.

The dynamic-colors directory of the color scheme repo contains shell scripts that can change the color scheme immediately on the fly. This can be used in your own scripts to alter the terminal appearance programmatically:

$ git clone https://github.com/mbadolato/iTerm2-Color-Schemes.git
$ cd iTerm2-Color-Schemes/dynamic-colors
$ for scheme in *.sh ; do ; echo $scheme ; \
   bash "$scheme" ; ../tools/screenshotTable.sh; sleep 0.5; done

Tab Bar Appearance & Colors

The following options control the appearance of the tab bar:

return {
  -- set to false to disable the tab bar completely
  enable_tab_bar = true,

  -- set to true to hide the tab bar when there is only
  -- a single tab in the window
  hide_tab_bar_if_only_one_tab = false,

  colors = {
    tab_bar = {

      -- The color of the strip that goes along the top of the window
      background = "#0b0022",

      -- The active tab is the one that has focus in the window
      active_tab = {
        -- The color of the background area for the tab
        bg_color = "#2b2042",
        -- The color of the text for the tab
        fg_color = "#c0c0c0",

        -- Specify whether you want "Half", "Normal" or "Bold" intensity for the
        -- label shown for this tab.
        -- The default is "Normal"
        intensity = "Normal",

        -- Specify whether you want "None", "Single" or "Double" underline for
        -- label shown for this tab.
        -- The default is "None"
        underline = "None",

        -- Specify whether you want the text to be italic (true) or not (false)
        -- for this tab.  The default is false.
        italic = false,

        -- Specify whether you want the text to be rendered with strikethrough (true)
        -- or not for this tab.  The default is false.
        strikethrough = false,
      },

      -- Inactive tabs are the tabs that do not have focus
      inactive_tab = {
        bg_color = "#1b1032",
        fg_color = "#808080",

        -- The same options that were listed under the `active_tab` section above
        -- can also be used for `inactive_tab`.
      },

      -- You can configure some alternate styling when the mouse pointer
      -- moves over inactive tabs
      inactive_tab_hover = {
        bg_color = "#3b3052",
        fg_color = "#909090",
        italic = true,

        -- The same options that were listed under the `active_tab` section above
        -- can also be used for `inactive_tab_hover`.
      }
    }
  }
}

Window Padding

You may add padding around the edges of the terminal cells:

return {
  window_padding = {
    left = 2,
    -- This will become the scrollbar width if you have enabled the scrollbar!
    right = 2,

    top = 0,
    bottom = 0,
  }
}

Styling Inactive Panes

since: nightly builds only

By default, inactive panes look no different from active panes, with the exception that the cursor will render as an outline style to indicate that it doesn't have the focus.

You can optionally apply a transformation to the pane colors with a hue, saturation, brightness (HSB) multipler.

In this example, inactive panes will be slightly de-saturated and dimmed:

return {
  inactive_pane_hsb = {
    saturation = 0.9,
    brightness = 0.8,
  }
}

The transform works by converting the RGB colors to HSV values and then multiplying the HSV by the numbers specified in inactive_pane_hsb.

Modifying the hue changes the hue of the color by rotating it through the color wheel. It is not as useful as the other components, but is available "for free" as part of the colorspace conversion.

Modifying the saturation can add or reduce the amount of "colorfulness". Making the value smaller can make it appear more washed out.

Modifying the brightness can be used to dim or increase the perceived amount of light.

The range of these values is 0.0 and up; they are used to multiply the existing values, so the default of 1.0 preserves the existing component, whilst 0.5 will reduce it by half, and 2.0 will double the value.

Window Background Image

since: nightly builds only

You can attach an image to the background of the wezterm window:

return {
  window_background_image = "/path/to/wallpaper.jpg"
}

If the path is a relative path then it will be expanded relative to the directory containing your wezterm.lua config file.

PNG, JPEG, GIF, BMP, ICO, TIFF, PNM, DDS, TGA and farbfeld files can be loaded.

The image will be scaled to fit the window contents. Very large images may decrease render performance and take up VRAM from the GPU, so you may wish to resize the image file before using it.

You can optionally transform the background image by specifying a hue, saturation, brightness multiplier:

return {
  window_background_image = "/path/to/wallpaper.jpg",

  window_background_image_hsb = {
    -- Darken the background image by reducing it to 1/3rd
    brightness = 0.3,

    -- You can adjust the hue by scaling its value.
    -- a multiplier of 1.0 leaves the value unchanged.
    hue = 1.0,

    -- You can adjust the saturation also.
    saturation = 1.0,
  },
}

See Styling Inactive Panes for more information on hue, saturation, brigthness transformations.

Window Background Opacity

since: nightly builds only

If your Operating System provides Compositing support then WezTerm is able to specify the alpha channel value for the background content, rendering the window background translucent and causing the windows/desktop behind it to show through the window.

macOS, Windows and Wayland support compositing out of the box. X11 may require installing or configuring a compositing window manager. XWayland under Mutter/Wayland also works without any additional configuration.

window_background_opacity specifies the alpha channel value with floating point numbers in the range 0.0 (meaning completely translucent) through to 1.0 (meaning completely opaque).

Setting this to a value other than the default 1.0 may impact render performance.

return {
  window_background_opacity = 1.0,
}

Text Background Opacity

since: nightly builds only

When using a background image or background opacity, the image content can have relatively low contrast with respect to the text you are trying to read in your terminal.

The text_background_opacity setting specifies the alpha channel value to use for the background color of cells other than the default background color.

The default for this setting is 1.0, which means that the background color is fully opaque.

The range of values permitted are 0.0 (completely translucent) through to 1.0 (completely opaque).

return {
  text_background_opacity = 0.3,
}