(first working dynload test with compilation done by manual calls to ocaml)
A few pieces of the puzzle:
* Loading of interfaces only from Catala files
* Registration of toplevel values in modules compiled to OCaml, to allow access
using dynlink
* Shady conversion from OCaml runtime values to/from Catala expressions, to
allow interop (ffi) of compiled modules and the interpreter
The module is renamed to `Mark`, and functions renamed to avoid redundancy:
`Marked.mark` is now `Mark.add`
`Marked.unmark` is now `Mark.remove`
`Marked.map_under_mark` is now simply `Mark.map`
etc.
`Marked.same_mark_as` is replaced by `Mark.copy`, but with the arguments
swapped (which seemed more convenient throughout)
Since a type `Mark.t` would indicate a mark, and to avoid confusion, the type
`Marked.t` is renamed to `Mark.ed` as a shorthand for `Mark.marked` ; this part
can easily be removed if that's too much quirkiness.
This is just a bunch of `sed` calls:
```shell
sed -i 's/ScopeSet/ScopeName.Set/g' compiler/**/*.ml*
sed -i 's/ScopeMap/ScopeName.Map/g' compiler/**/*.ml*
sed -i 's/StructMap/StructName.Map/g' compiler/**/*.ml*
sed -i 's/StructSet/StructName.Set/g' compiler/**/*.ml*
sed -i 's/EnumMap/EnumName.Map/g' compiler/**/*.ml*
sed -i 's/EnumSet/EnumName.Set/g' compiler/**/*.ml*
sed -i 's/StructFieldName/StructField/g' compiler/**/*.ml*
sed -i 's/StructFieldMap/StructField.Map/g' compiler/**/*.ml*
sed -i 's/StructFieldSet/StructField.Set/g' compiler/**/*.ml*
sed -i 's/EnumConstructorMap/EnumConstructor.Map/g' compiler/**/*.ml*
sed -i 's/EnumConstructorSet/EnumConstructor.Set/g' compiler/**/*.ml*
sed -i 's/RuleMap/RuleName.Map/g' compiler/**/*.ml*
sed -i 's/RuleSet/RuleName.Set/g' compiler/**/*.ml*
sed -i 's/LabelMap/LabelName.Map/g' compiler/**/*.ml*
sed -i 's/LabelSet/LabelName.Set/g' compiler/**/*.ml*
sed -i 's/ScopeVarMap/ScopeVar.Map/g' compiler/**/*.ml*
sed -i 's/ScopeVarSet/ScopeVar.Set/g' compiler/**/*.ml*
sed -i 's/SubScopeNameMap/SubScopeName.Map/g' compiler/**/*.ml*
sed -i 's/SubScopeNameSet/SubScopeName.Set/g' compiler/**/*.ml*
```
... and reformat
Many changes got bundled in here and would be too tedious to separate.
Closes#330
See changes in `shared_ast/definitions.ml` to check the main point.
- the biggest change is a modification of the struct and enum types in
expressions: they are now stored as `Map`s throughout passes, and no longer
converted to indexed lists after scopelang. Their accessors are also changed,
and tuples only exist in Lcalc (they're used for closure conversion).
This implied adding some more information in the contexts, to keep the mapping
between struct fields and scope output variables. It should also be much more
robust (no longer relying on assumptions upon different orderings).
- another very pervasive change is more cosmetic: the rewrite of the main AST to
use inline records, labelling individual subfields.
- moved the checks for correct definitions and accesses of structures from
`Scope_to_dcalc` to `Typing`
- defining some new shallow iterators in module `Shared_ast.Expr`, and
factorising a few same-pass rewriting functions accordingly (closure
conversion, optimisations, etc.)
- some smaller style improvements (ensuring we use the proper compare/equal
functions instead of `=` in a few `when` closes, for example)
This was the only reasonable solution I found to the issue raised
[here](https://github.com/CatalaLang/catala/pull/334#discussion_r987175884).
This was a pretty tedious rewrite, but it should now ensure we are doing things
correctly. As a bonus, the "smart" expression constructors are now used
everywhere to build expressions (so another refactoring like this one should be
much easier) and this makes the code overall feel more
straightforward (`Bindlib.box_apply` or `let+` no longer need to be visible!)
---
Basically, we were using values of type `gexpr box = naked_gexpr marked box`
throughout when (re-)building expressions. This was done 99% of the time by
using `Bindlib.box_apply add_mark naked_e` right after building `naked_e`. In
lots of places, we needed to recover the annotation of this expression later on,
typically to build its parent term (to inherit the position, or build the type).
Since it wasn't always possible to wrap these uses within `box_apply` (esp. as
bindlib boxes aren't a monad), here and there we had to call `Bindlib.unbox`,
just to recover the position or type. This had the very unpleasant effect of
forcing the resolution of the whole box (including applying any stored closures)
to reach the top-level annotation which isn't even dependant on specific
variable bindings. Then, generally, throwing away the result.
Therefore, the change proposed here transforms
- `naked_gexpr marked Bindlib.box` into
- `naked_gexpr Bindlib.box marked` (aliased to `boxed_gexpr` or `gexpr boxed` for
convenience)
This means only
1. not fitting the mark into the box right away when building, and
2. accessing the top-level mark directly without unboxing
The functions for building terms from module `Shared_ast.Expr` could be changed
easily. But then they needed to be consistently used throughout, without
manually building terms through `Bindlib.apply_box` -- which covers most of the
changes in this patch.
`Expr.Box.inj` is provided to swap back to a box, before binding for example.
Additionally, this gives a 40% speedup on `make -C examples pass_all_tests`,
which hints at the amount of unnecessary work we were doing --'
Also add some safeguards against bad propagation of types (e.g. checking the
arrow type of functions upon application); partly disabled at the moment since
they don't pass yet but that'll be further work.
The AST structures track annotations (e.g., at the moment, source code
position information) in a lot of places. This patch tidies up a bit and
removes some duplication, ensuring a single level of annotation wrapping
at each AST recursion level.
This will be important when adding type information in these
annotations, because there will be consitency constraints to be ensured
and duplication is a likely source of mistakes.
this patch is just a bunch of `sed` commands
```shell
cd compiler
sed -i 's/Pos.marked/Marked.pos/g' *.ml* **/*.ml*
sed -i 's/Pos.unmark/Marked.unmark/g' *.ml* **/*.ml*
sed -i 's/Pos\.get_position/Marked.get_mark/g' *.ml* **/*.ml*
sed -i 's/Pos\.same_pos_as/Marked.same_mark_as/g' *.ml* **/*.ml*
sed -i 's/Pos\.map_under_mark/Marked.map_under_mark/g' *.ml* **/*.ml*
sed -i 's/Pos\.mark/Marked.mark/g' *.ml* **/*.ml*
sed -i 's/Pos\.compare_marked/Marked.compare/g' *.ml* **/*.ml*
```
