* SubGhz: add worker subghz_txrx
* SubGhz: added support for transferring Russian characters and support for backspace in CLI subghz_txrx
* SubGhz: refactoring subghz_txrx_worker, added a callback for accepting data in an empty one RX buffer
* SubGhz: fix conflict
* SubGhz: fix syntax errors
* Cli: document string_move usage and its behavior
* FuriHal: update subghz api and documentation. Subghz: move chat to subghz cli subcommand.
* Subghz: update text in chat cli
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: SPI refactoring, flexible bus reconfigration on fly, same desiag as i2c.
* Lib: update CC1101 driver documentation
* FuriHal: update spi symbol names to match naming convention.
* Project: fix release build, replace asserts with checks.
* FuriHal: i2c refactoring, new bus access model, flexible bus gpio configuration.
* FuriHal: set i2c pins to high on detach.
* FuriHal: more i2c bus events, put bus under reset when not used, move bus enable/disable routine to bus handler.
* FuriHal: fix i2c deadlock in power api, add external i2c handle.
* Notification: add sequence_single_vibro
* SubGhz: optimizing the performance of the GUI ReadRAW
* SubGhz: full highlighting of the default filename on save
* SubGhz: add man Leopard, Faraon, Reff, ZX-750, Back_SL-B9, fix syntax
Co-authored-by: あく <alleteam@gmail.com>
* [FL-2051] BadUsb: new GUI
* add missing assets
* skip empty lines and leading spaces
* SubGhz: add alignment check to keystore mess with iv routine
Co-authored-by: あく <alleteam@gmail.com>
* subghz_keystore_mess_with_iv shortened
- less instructions
- less registers used (no need for r3 anymore)
* subghz_keystore_mess_with_iv shortened (again)
* 7b46c12e408cdc541e9e91c0392365bb4960fabd reduced instructions count from 4+16x8=132 to 3+16x7=115
* here loop is removed and reduces all to only 15 instructions
* branch label is kept to preserve original intent and for historical record
* SubGhz: GUI RAW Read view
* SubGhz: GUI Read RAW refactoring
* SubGhz: fix bug wrong frequency of the allowed transmission
* GUI Read RAW refactoring
* SubGhz: fix set the default frequency
* SubGhz: fix save filename when returning from another menu
* SubGhz: fix Send and Back button behavior
Co-authored-by: あく <alleteam@gmail.com>
* [FL-2010] furi-hal-vcp rework
* Fix connect state change on vcp enable
* New thread naming scheme and stack size adjustment.
* Applications: rename worker threads to match new naming scheme.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: add save key in flipper file format
* [FL-2005] SubGhz: fix stored signals cannot be deleted
* SubGhz: add load key in flipper file format
* SubGhz: fix syntax
* SubGhz: fix bad file upload
* Storage: add function to get the next free filename
* SubGhz: add save RAW in flipper file format
* SubGhz: add load RAW in flipper file format
* SubGhz: refactoring protocol
* SubGhz: refactoring scene
* SubGhz: fix SubGhzNotificationState define
* Makefile: proper comapre for FORCE
Co-authored-by: あく <alleteam@gmail.com>
* Toolbox: fix null pointer dereference in manchester decoder.
* FuriHal: use MPU to protect from null pointer dereference, replace flash driver with our own implementation.
* SubGhz: add file with manufactory codes, and the ability to add your own manufactory codes for KeeLog
* SubGhz: add encrypt RAW data, add decrypt and get RAW data
* SubGhz: add encrypt magic_xor_atomo
* SubGhz: parsing atomo using file encrypt
* SubGhz: fix calculating the size of the read buffer
* SubGhz: parsing Nice FLOR S using file encrypt
* SubGhz: add file encrypt nice_flor_s_tx, fix name load file
* SubGhz: fix checking read buffer size
* Update subghz_keystore.c
* SubGhz: fix calculating the size of the read buffer
Co-authored-by: あく <alleteam@gmail.com>
Removing SD card during brut-force causes endless loop.
This is because calling a string_t destructor invalidates
variable, but we did checking string_size() after.
Co-authored-by: あく <alleteam@gmail.com>
* Core: wipe memory after free. RFID,iButton: fix iterator use after invalidation.
* Debug: support unix wildcards for register matching in svd, update MCU description file and minify it.
* Toolbox: getter for File in FlipperFile.
* Makefile: conditional flashing
* SubGhz: keeloq_mfcodes encryption tool.
* FuriHal: proper IV handling on CBC in crypto. SubGhz: add support for encrypted keeloq keys. Makefile: move formatting to top Makefile.
* SubGhz: rename some function names to match naming scheme.
* SubGhz: encryption tool, fix windows line endings
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* File_Worker: getting the name of a new file with an index
* SubGhz: add decoder RAW protocol
* SubGhz: add view Save RAW
* SubGhz: refactoring subghz custom event
* SubGhz: fix syntax
* SubGhz: fix error build
* SubGhz: test build
* SubGhz: refactoring subghz, add rename, delete, start and emulate RAW signal
* SubGhz: fix triangle glitch in save raw view
* SubGhz: fix receiver config scene
* SubGhz: fix transfer after returning from save scene
* Canvas: add font rotation
* SubGhz: raw protocol encoder
* SubGhz: fix error completion of transfer raw encoder
* SubGhz: increased the speed of reading RAW data from a flash drive, displaying the name of the saved file in the Save RAW scene
* Canvas: fix font rotation
* SubGhz: fix navigation save RAW scene
* SubGhz: add decode came atomo
* Git: renormalize
* Cleanup sources and enums
* Gui: add font direction to canvas reset, canvas init sequence cleanup.
* SubGhz: reorder menu.
* Gui: correct canvas_set_font_direction signature
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Scripts: add flipper lib, migrate ob to flipper lib, update ob.data
* Makefile: speedup build with phony target for .d files
* FuriHal,U8G2: full MGG display support and ERC contrast tuning.
* Desktop: fix dolphin rename artifact.
* Scripts: port otp.py to flipper scripting lib.
* Scripts: add wipe and core1 flashing to flash.py, remove obsolete shell scripts
* Scripts: replace core1 flashing script with global makefile.
* Scripts: final touches and migration to python. Root Makefile for everything.
* RPC: Add App start, lock status
- Add RPC commands Application start, lock status acquiring.
- Write tests for RPC App system.
- Replace Unit Tests application with CLI command. This is for CI needs and for tests that run application.
* Fix NDEBUG build
* Update PB submodule
* Fix RPC print (ENABLE DEBUG PRINT!)
* snprintf -> string_t
* Fix Hard Fault (early mutex free)
* printf -> string_t, format, enable tests
* Update submodule: protobuf
* Applications: rollback unit test naming scheme.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ToolBox: add manchester-decoder and manchester-encoder
* SubGhz: add new FM config cc1101
* Subghz: add protocol Kia
* SubGhz: fix receiving the last packet Nero Radio
* SubGhz: app protocol CAME Twin (TW2EE/TW4EE)
* SubGhz: add protocol CAME Atomo (AT03EV/ AT04EV)
* F7: sync with F6
* SubGhz: add frequency analyzer
* SubGhz: remove space from file name
* SubGhz: frequency analyzer add filter and fix view
* [FL-1939] GubGhz: Frequency analyzer redesign
* SubGhz: fix incorrect subghz api call sequence in frequency analyzer worker
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Lib: new flipper file format library
* Lib: flipper file format cpp wrapper
* Storage: simple function for remove file and check error
* iButton app: remove file worker, use new flipper file format instead
* Dialogs: storage error message
* Storage: simple function for mkdir and check error
* iButton app: error messages
* Libs: update makefile
* RFID app: remove file worker, use new flipper file format instead
* Flipper File: library documentation
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: fix notifications in read EMV sequence
* nfc: set focus on previously saved card
* nfc: add incorrect file format message
* mifare ultralight: increase size of max dump
* elements: draw multiline text only until it fits screen
* nfc: support variable PAN number length
* nfc: change AID display
* nfc: change worker custom event to prevent scene reenter
* nfc: double check for PAN tag
* nfc: fix edit card name appearance
* Nfc: read EMV card without name if PDOL is present.
* Desktop: increase unlock key press interval, switch to OS ticks instead of HAL.
* Desktop: remove debug logging
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: add charge suppress API.
* FuriHal: add guards to insomnia and charge suppress routines.
* FuriHal: proper API for scheduler in power.
* FuriHal: move charging control from critical section, fix deadlock.
* Gui: use FreeRTOS native timers controls for IconAnimation, fix crash on animation start stop
* menu: remove dead code
* loader: change views from modules instead of menu service
* dolphin: start main menu with loader API
* applications: don't start menu service
* loader: add debug tools menu
* gui modules: introduce menu model
* loader: remove calls to menu service API
* gui modules: implement menu module
* loader: add menu view
* gui menu: add animation
* applications: remove menu service
* gui modules: rename icon_menu -> menu
* loader: clean up code
* menu module: add documentation, format code
* menu: remove unused parameter
* desktop: use loader to launch primary menu
* Applications: cleaner makefile app declaration. Loader: application autostart
* Gui: cleanup menu and submenu API.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission, decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config, add hardware signal processing less than 16 μs, add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets
Co-authored-by: あく <alleteam@gmail.com>
* WidGet: fix name Multiline String Element
* SubGhz: rename SubGhzProtocol to SubGhzParser and bring it up
* SubGhz: a new way to navigate in receiver views
* SubGhz: fix syntax
* WedGet: add forwarding input type to wedget button callback, fix using a callback in an application
* SubGhz: add assertions and status checks
* SubGhz: fix syntax
* [FL-1790] SubGhz: fix GateTX
* SubGhz: add 434.42 MHz frequency support
* SubGhz: rename type protocol, add decoder stage names
* SubGhz: fix navigation through received signals when changing scenes
* SubGhz: fix 2-fsk config
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: refactoring
* WeGet: Add support for outputting formatted lines, events center button pressed, center button released
* Variable Item: slightly changed the display of data on the screen
* SubGhz: add show errors, add show preset, refactoring
* SubGhz: refactoring transmitter
* SubGhz: removed unused modules
* SubGhz: Add FuriHalSubGhzPresetOok270Async setting menu
* SubGhz: fix annotation
* SubGhz: add support Nero Radio
Co-authored-by: あく <alleteam@gmail.com>
* Gui: move rotation logic to ViewPort, replace delayed View switch in ViewDispatcher with event filtering and redirection to previous view.
* SubGhz: add function description
* Gui, Input: add event id to input events.
* SubGhz: fix "crashing on ?"
* SubGhz: add icon scanning
* SubGhz: updated interface read scene, updated interface config scene
* Assets: update subghz assets
* SubGhz: replaced the picture in the read scene, changed the paths to additional files
* SubGhz: fix deadlock in timer callback
* SubGhz: fix icon read scene
* SubGhz: fix icon read scene
* SubGhz: fix duble text transmitter scene
* SubGhz: correct spelling. Gui: bigger queue for ViewDispatcher.
* SubGhz: fix creation and transmission of dynamic code without the presence of a manufactory key
* SubGhz: fix keelog, setting a name in the absence of a manufactory key
* SubGhz: fix load bad keelog key
* Format sources
* Furi: remove garbage from core. GpioTester: fix memory leak and cleanup
* Accessor: remove obsolete notification code
* MusicPlayer: remove input event injection
* Input: rename id to sequence
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: fix assert on worker double stop.
* SubGhz: add hopping mode (315.00, 433.92, 868.00)
* SubGhz: add support for new alarms on the keelog protocol
* SubGhz: update te in princeton protocol
* SubGhz: move static to tests, rename sniffer to hopper/auto, remove delay from timer thread, optimize locking strategy.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Add millis() furi, add subghz history struct
* SubGhz: Fix subghz history
* Gubghz: Fix code repeat history, add clean history
* SubGhz: reading and adding keys to history
* Gui: Renaming Sub 1-Ghz -> SubGhz
* Archive: Renaming Sub 1-Ghz -> SubGhz
* SubGhz: Add menu history, modified button for sending a signal, changed output of data about accepted protocol
* Archive: Fix name subghz
* SubGhz: Menu navigation
* Assets: Add assets/SubGHz/icon.png
* Assets: add new icons for subghz
* SubGhz: Fix name Add manually scene
* SubGhz: Fix load icon Read scene. rename encoder struct, rename protocol function load from file, add load raw data protocol, add info pleasant signals all protocol
* SubGhz: fix memory leak
* SubGhz: change of receiving frequency for read scene
* SubGhz: Add save/load frequency and preset, add automatic configuration of transmit/receive to the desired frequency and modulation, add button "save" config scene
* SubGhz: Fix frequency and preset, fix frequency add manualli scene, fix re-executing the parser
* Furi-hal-subghz: add 2-FSK config, fix ook config 650KHz BW Tx filter
* Fix formatting and release build
* SubGhz: Delete read scene
* SubGhz: Fix frequency add manualli scene, refactoring code
* SubGhz: 2 profiles for OOK, fix broken build.
* SubGhz: Add passing static codes from read scene, add notification read scene, refactoring code
* SubGhz: fix assert on worker double stop.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* assets: add EMV AID table for NFC app
* file-worker: add searching for value by the key
* nfc: add emv parser helpers
* assets: add country and currency codes
* nfc: add country and currency code parsing
* emv_decoder: add country and currency code support
* nfc: add AID. currency and country display
* nfc: rework bank_card view
* nfc: add currency and country save
* assets: change emv chip asset
* nfc: change asset in bank card
* gui: add frame element to widget
* nfc: add bank card frame, add documentation
* rfal: fix long APDU command emulation
* nfc: fix typos
* Scripts ReadMe: assets delivery command
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
- Restrict with 31 bytes length for remote and signal name
- Don't stuck for 0 PWM cycle timings
- Support timings > 65535 PWM cycles
- Fix remote file open error
- Add IRDA TX debug redirect
- Add remote parse error print, improve parsing, support tabs
- Fix stucks with uncorrect RAW signal values, long strings in remote file, etc
- Fix HAL signals capturing (save previous read value)
- Fix leak in case of failed parsing
* Storage-cli: the file write function is splitted into a function for working with text and function for raw data
* Storage-cli: read_chunks, renamed write_raw to write_chunk
* Storage-cli: fix typo
* SD Hal: fixed wrong read/write block address
* HAL-console: printf
* Storage benchmark: more popular sizes
* Toolbox: md5
* Storage-cli: better read_chunks function, md5 hash function
* Notification: fixed incorrect error message when loading settings
* Storage-cli: stat command
* Storage-cli: stat, "/" is also storage
* Scripts: add storage managment script
* Scripts, storage lib: send command with known response syntax instead of SOH
* Scripts: python3 from env
* Storage-cli: fixed mess with error texts
* Storage-cli: write, show welcome message only if we didn't have any errors
* Storage: poorly fixed folders copying
* Storage: close an old file if an error occurred while opening a new file
* Storage-cli: fixed storage info spacing
* Scripts: use positional arguments in storage.
* Scripts: explicit string encoding and decoding, documentation in comments.
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: update STM32CubeWB to latest version.
* Makefile: debug other script
* FuriHal: correctly handle 0 size transfers in VCP
* Dolphin: cleanup and minor timer tuning.
* FuriHal: update FreeRTOS config with bigger timer command queue.
* FuriHal: delayed irq enabling, fixes missing ticks.
* FuriHal: use SFSA to determine free space for internal FS, update linker script to use as much space as theoretically possible.
* Scripts: update core2 flashing scripts and OB data.
* Github: bundle resources, core2 firmware and supplementary data.
* GitHub: versioning for supplemental artifacts
* SubGhz: the functions of saving loading KeeLog have been modified, saving KeeLog is prohibited
* SubGhz: Fix displaying Nice FlorS in the Raed scene
* SubGhz: Fix displaying Faac SLH in the Raed scene
* SubGhz: Fix displaying iDo in the Raed scene
* SubGhz: Fix displaying Star Line in the Raed scene
* SubGhz: Fix displaying Nice Flo in the Raed scene, added save and load functions. (testing needed, no remote control)
* SubGhz: subghz_beginadded common encoder upload signal
* SubGhz: add Came encoder
* SubGhz: modified pricenton encoder, fix view transmitter hide the "Send" button if there is no encoder
* SubGhz: add nice flo encoder, need testing no remote control
* SubGhz: add gate_tx encoder
* SubGhz: add nero_sketch encoder
* SubGhz: add keelog encoder
* SubGhz: add long upload upload while the button is pressed while releasing the transfer is over, with a check for sticking (maximum 200 upload repetitions)
* SubGhz: fix max upload
* SubGhz: Fix structure subghz add encoder
* SubGhz: add generating and sending a dynamic keelog key, refactoring the code
* SubGhz: add notifications
* SubGhz: add creating a new remote control (Pricenton, Nice Flo 12bit, Nice Flo 24bit, CAME 12bit, CAME 24bit, Gate TX, DoorHan)
* SubGhz: Fix load file, fix scene start
* Subghz: Fix show key
* SubGhz: Fix subghz_cli
* SubGhz: Fix furi-hal-subghz
* Format sources
* SubGhz: standard notification scheme, fix broken assert in DMA.
* SubGhz: move level alignment logic to furi-hal-subghz, fix spelling, cleanup.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: port spi to ll. Bootloader: add spi and display.
* Makefile: rollback disabled freertos introspection
* FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio.
* SdCard: port missing bits to furi-hal-gpio
* FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code.
* GUI: clear canvas on start. FuriHal: no pullup on radio spi bus.
* FuriHal: use check instead of assert in spi lock routines
* FuriHal: remove timeouts
* SdHal: add guard time to SDCARD CS PIN control.
* FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation.
* Bootloader: update DFU text and add image.
* FuriHal: drop unused ST HAL modules.
* SdHal: fixed swapped hal_gpio_init_ex arguments
* SpiHal: fixed swapped hal_gpio_init_ex arguments
* IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex
* RfidHal: fixed swapped hal_gpio_init_ex arguments
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Lib: add random name library
* Text_input: add default text clearing
* All: rework all applications with new text_input API
* Nfc: fix removing dev file on save_name scene enter
* Lib: move all free radicals to toolbox and update API usage.
Co-authored-by: あく <alleteam@gmail.com>
* FS-Api: removed datetime manipulation functions and most of the file flags
* Filesystem: common proxy api
* Filesystem: renamed to Storage. Work has begun on a glue layer. Added functions for reentrance.
* Storage: sd mount and sd file open
* Storage: sd file close
* Storage: temporary test app
* Storage: free filedata on close
* Storage: sd file read and write
* Storage: added internal storage (LittleFS)
* Storage: renamed internal commands
* Storage: seek, tell, truncate, size, sync, eof
* Storage: error descriptions
* Storage: directory management api (open, close, read, rewind)
* Storage: common management api (stat, fs_stat, remove, rename, mkdir)
* Dolphin app and Notifications app now use raw storage.
* Storage: storage statuses renamed. Implemented sd card icon.
* Storage: added raw sd-card api.
* Storage settings: work started
* Assets: use new icons approach
* Storage settings: working storage settings
* Storage: completely redesigned api, no longer sticking out FS_Api
* Storage: more simplified api, getting error_id from file is hidden from user, pointer to api is hidden inside file
* Storage: cli info and format commands
* Storage-cli: file list
* Storage: a simpler and more reliable api
* FatFS: slightly lighter and faster config. Also disabled reentrancy and file locking functions. They moved to a storage service.
* Storage-cli: accommodate to the new cli api.
* Storage: filesystem api is separated into internal and common api.
* Cli: added the ability to print the list of free heap blocks
* Storage: uses a list instead of an array to store the StorageFile. Rewrote api calls to use semaphores instead of thread flags.
* Storage settings: added the ability to benchmark the SD card.
* Gui module file select: uses new storage api
* Apps: removed deprecated sd_card_test application
* Args lib: support for enquoted arguments
* Dialogs: a new gui app for simple non-asynchronous apps
* Dialogs: view holder for easy single view work
* File worker: use new storage api
* IButton and lfrrfid apps: save keys to any storage
* Apps: fix ibutton and lfrfid stack, remove sd_card_test.
* SD filesystem: app removed
* File worker: fixed api pointer type
* Subghz: loading assets using the new storage api
* NFC: use the new storage api
* Dialogs: the better api for the message element
* Archive: use new storage api
* Irda: changed assest path, changed app path
* FileWorker: removed unused file_buf_cnt
* Storage: copying and renaming files now works between storages
* Storage cli: read, copy, remove, rename commands
* Archive: removed commented code
* Storage cli: write command
* Applications: add SRV_STORAGE and SRV_DIALOGS
* Internal-storage: removed
* Storage: improved api
* Storage app: changed api pointer from StorageApp to Storage
* Storage: better file_id handling
* Storage: more consistent errors
* Loader: support for NULL icons
* Storage: do nothing with the lfs file or directory if it is not open
* Storage: fix typo
* Storage: minor float usage cleanup, rename some symbols.
* Storage: compact doxygen comments.
Co-authored-by: あく <alleteam@gmail.com>
* [FL-1489] IRDA: move to FileWorker, fixes
* Use FileWorker
* Use file_select to select remotes
* Fix some crashes
* Add RAW parsing restrictions
* Remove excess scene (LearnDoneAfter)
* Move all file system logic to standalone object
* Firmware: drop F5 target
* Rename app-loader to loader
* Update code owners file
* Loader: global application start lock API, minor refactoring
* Archive: update loader usage
* Cli: Command flags, global application start lock
* Apps: update cli API usage
* Bootloader: minor refactoring
* Firmware: minor build refactoring
* SubGhz: GUI packet test
* SubGhz: drop packet transmission and unused presets
* Github: drop F5 from build
* Archive: favorites
* Archive: a little bit more of Favorites
* Add RAW format
* F5 stubs for build to pass
* Fix saving decoded signal error
* Irda: set ISR before starting timer, remove explicit NVIC configuration
Co-authored-by: あく <alleteam@gmail.com>
* gui: refactore ViewNavigator -> SceneManager
* view_dispatcher: remove scene controller, add custom and navigation cb
* scene_manager: rework scene controller, move AppScene from lib
* nfc: rework nfc scenes with new scene controller API
* view_dispatcher: crash on free if not all views were freed
* nfc: introduce scene declaration
* scene_manager: allocate and configure application scenes
* nfc: rework nfc with new Scene Manager API
* scene_manager: remove dublicated scene handlers allocation
* nfc: rework nfc app with new scene manager API
* view_dispatcher: add tick event
* scene_manager: add tick event type and handler
* nfc: rework notifications with tick event
* scene_manager: remove scene id from scene structure
* scene_manager: rename array -> stack, add documentation
* api-hal-nfc: remove listen activation processing
* nfc_scene_start: shorter submenu call
* nfc: fix nfc file name
* nfc: fix Retry in mifare ul success read
* nfc_cli: fix read timeout in nfc_detect CLI command
Co-authored-by: あく <alleteam@gmail.com>
* nfc: add scripts menu scene
* canvas: add glyph width api
* app_scene: add state to Scene template
* gui: introduce TextBox view
* nfc: add mifare ultralight read scenes
* nfc: add mifare ultralight menu scene
* nfc: fix scene functions declaration
* Gui: use size_t for sizes.
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: changing the operation of the capture timer, and the logic of the work of parsers
* Add toolbox lib. Move levels to toolbox. Subghz switch to levels.
* Subghz: update worker signatures
* SubGhz: pluggable level duration implementations.
* SubGhz : test drawing pictures in Gui
* SubGhz: Added a callback with the parser structure as argument
* SubGhz: copy protocol data to model
* SubGhz: refactoing code
* SubGhz: cleanup and format sources
* SubGhz: remove comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* GUI: Icons and IconsAnimation refactoring. Switch assets to new Icon API.
* Gui: icon and animation draw now do not accept null pointer
* Format Sources
* Fix no debug build
* Furi: stricter checks in memmgr
* ApiHal: set frequency and path in one go. Drivers: proper frequency registers calculation for CC1101. Update subghz cli to match new api.
* SubGhz: preparation for parsers porting, tim2 sharing
* ApiHal: add interrupts API, move all TIM2 related things there.
* SubGhz: refactor protocol lib and add keeloq.
* SubGhz: proper init_set for keeloq manafacture key
* SubGhz: port more protocols to lib
* SubGhz: load keeloq manufacture keys from sd card (if any).
* SubGhz: format output from protocols.
* SubGhz: use default frequency in subghz_rx cli command.
* SubGhz: keeloq key types
* Fix compillation error when internal storage disabled
* SubGhz: minor cleanup
* SubGhz: properly handle timeout and reset signal in subghz_rx
* SubGhz: Worker, Capture View. Furi: emulate thread join.
* SubGhz: free strings on keeloq key load end
* SubGhz: update protocols reporting API, app refactoring and capture view, update API HAL usage.
* SubGhz: update dump formatting
* ApiHal: backport subghz preset to F5
* ApiHal: backport subghz frequency range to F5
* Update MLib to latest master.
* Archive: update string_t usage, add unsafe usage TODO, change model type to blocking and fix invalid usage.
* Gui: update text_input API and it's usage.
* fix blocking model issues
* fix unsafe string_t usage
Co-authored-by: Igor Baranov <bedtimeposts@gmail.com>
Co-authored-by: its your bedtime <23366927+itsyourbedtime@users.noreply.github.com>
* ibutton: long names partial fix\
* ibutton: limit max filename length to 22 chars
* elwrapping long names to a new line
* Proper m-string size usage
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Add saving to SD-Card (not ready yet)
* Add saving to SD-card (done)
* Select previous menu item
* Fix central button
* Fix current_button
* Refactoring
* Add notifications
* [FL-1417] Add IRDA CLI
CLI commands:
1) ir_rx
Receives all IR-trafic, decodes and prints result to stdout
2) ir_tx <protocol> <address> <command>
Transmits IR-signal. Address and command are hex-formatted
* Fix BUG with random memory corruption at random time in random place in random universe in random unknown space and time forever amen
* Fix submenu set_selected_item
* Bring protocol order back
* Add TODO sdcard check
* GUI module submenu: fix documentation
* GUI module submenu: add submenu_set_selected_item fn
* App iButton: use submenu_set_selected_item to store and set selected item in submenu
* App iButton: swap write and emulate in "saved key menu" scene
* App iButton: file select can now switch to the previous selected file
* App iButton: swap write and emulate indexes in "saved key menu" scene
* Gui module file_select: work with separate extension
* iButton app: separate file managment, file error handling
* SD card api: custom error message
* iButton app: better file error handling
Co-authored-by: あく <alleteam@gmail.com>
* GUI module submenu: fix documentation
* GUI module submenu: add submenu_set_selected_item fn
* App iButton: use submenu_set_selected_item to store and set selected item in submenu
* App iButton: swap write and emulate in "saved key menu" scene
* App iButton: file select can now switch to the previous selected file
* App iButton: swap write and emulate indexes in "saved key menu" scene
Co-authored-by: あく <alleteam@gmail.com>
* Add cscope db generation
* Add api-hal-irda, TIM2: HAL->LL
* Add libirda: pwm decoding
* Universal state machine
* Add irda decoder library
* Move IRDA capture to standalone tool
* Add encoder/decoder samsung32, NEC, fix bugs
* Port current App to new Irda lib
* Fix clang format for test data
* Port IRDA api-hal to f6
Co-authored-by: あく <alleteam@gmail.com>
* Add littlefs submodule
* Furi: add mutex in logging, fix issues with corrupted printf
* ApiHal: disable debug traces in ble glue
* App-loader: more logs
* Passport: fix invalid DolphinState usage
* ApiHal, linker script: flash API is now aware of free space, complete abstraction layer for storage
* Internal Storage: littlefs based storage services with key value API. Migrate dolphin state to new storage API.
* Add bootloader versioning
* Move some logic to api-hal-version
* Backport to f4
* Dolphin: update version screen layout, make it more readable
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* API HAL SPI: refactoring, split into layers, prepare ST HAL separation. API HAL SubGhz: initialize on start. Drivers: add basic cc1101 driver. Update API usage. Debug: increase max debugger port speed. Remove subghz apps.
* CC1101: chip status handling. ApiHalSpi: increase SubGhz bus speed to 8mhz. F4: backport subghz initialization.
* Api Hal SubGhz: rx path and frequency. CC1101: frequency control.
* SubGhz Application: basic tests
* SubGhz app: tone and packet test. API HAL SUBGHZ: update configs, add missing bits and pieces.
* SD App: more specific sd api
* Gui: view dispatcher fix api documentation
* Gui: view holder thingy
* SD App: do not sleep when working with sd card bus
* SD App: queue-based lifecycle
* Assets: sd-card assets
* SD App: init file select api
Co-authored-by: あく <alleteam@gmail.com>
* rename old ibutton app to ibutton-test
* more renames
* updated onewire library compilation condition
* add submenu_clean subroutine
* add index for submenu callback
* c++ guard for gui modules
* add released ibutton app
* fix the position of the submenu window if there are too few items
* iButton app basis
* negative icon position info
* fix submenu_clean subroutine
* add ibutton app to applications makefile
* add onewire key read routine to read mode
* rename mode to scene
* rename files and folder (mode to scene)
* rename ibutton view to view manager
* rename get_view to get_view_manager
* cpp guards
* key read, store and notify features
* syntax fix
* make iButtonScene functions pure virtual
* fix syntax
* add text store, add new scene (crc error)
* not a key scene
* syntax fix
* read success scene
* app, switching to the previous scene with the number of scenes to be skipped
* scene whith menu when key is readed
* fix font height calculation, fix offsets
* add key write scene
* view_dispatcher_remove_view subroutine
* generic pause/resume os methods
* fix furi_assert usage
* key store, worker
* fix pointer comparsion
* saved keys, saved key action scenes
* key delete/confirm delete scenes and routines
* use last input subsystem changes
* fix syntax
* fix new model usage in submenu
* fix includes
* use vibro pin
* use stored key name if valid
* emulate scene
* random name generator
* name and save readed key scenes, new icon
* fix icon position
* fix text scene exit
* fix naming, fix text placement, new info scene
* state-driven cyfral decoder
* better cyfral decoder
* better cyfral decoder
* one wire: search command set
* metakom decoder
* more key types
* add next scene to error scenes
* universal key reader
* use new key reader
* syntax fix
* warning fix
* byte input module template
* new thread and insomnia api usage
* New element: slightly rounded frame
* Use elements_slightly_rounded_frame in text input
* Gui test app: byte input usage
* Byte input module: data drawing and selection
* Byte input: comment currently unused fns
* remove volatile qualifier
* base byte input realisation
* App gui test: remove internal fns visibility
* Byne input, final version
* test install gcc-arm-none-eabi-10-2020-q4-major
* test install gcc-arm-none-eabi-10-2020-q4-major
* App iButton: byte input view managment
* App iButton: add key manually scenes
* App iButton: rename scenes, add popup timeout
* App iButton: use new scenes, new fn for rollback to specific prevous scene.
* App iButton: remove byte input view on app exit
* App iButton: edit key scene
* Module byte input: reduce swintch value to uint8_t
* Module byte input: switch from switch-case to if, unfortunately we need compile-time constants to use with switch
* Icons: new small arrows
* Module byte input: new arrangement of elements
* OneWire slave lib: fix deattach sequence
* App iButton: pulse sequencer
* App iButton: add more keys to store
* App iButton: split key worker to separate read/write/emulate entitys
* App iButton: use new read/emulate entities
* fix callback pointer saving
* App iButton: use KeyReader error enum instead of KeyWorker error list handling
* App iButton: do not use insomnia fns in pulse sequencer
* App iButton: use KeyReader error enum in read scene
* OneWire slave lib: more READ ROM command variants, call callback only if positive result
* GPIO resources: add external gpio
* App SD/NFC: removed application
* App iButton-test: update to new light api
* App iButton: update to new light-api
* Outdated apps: add api-light-usage
* Gpio: update SD card CS pin settings
* API-power: added fns to disable/enable external 3v3 dc-dc
* API-gpio: separated SD card detect routines
* Resources: removed sd cs pin
* SD card: low level init now resets card power supply
* App SD-filesystem: use new card detect fns
* SD card: fix low level init headers
* SD card: more realilable low level init, power reset, exit from command read cycle conditionally
* App SD-filesystem: led notifiers, init cycling
* SD card: backport to F4
* Api PWM: add c++ guards
* App iButton: yellow blink in emulate scene, vibro on
* App iButton: one wire keys command set
* App iButton: successful write scene
* App iButton: key writer
* App iButton: syntax fix
* App iButton: notify write success
* App iButton: fix double scene change
* SD card: handle eject in init sequence
* SD card: api to set level on detect gpio
* SPI: api to set state on bus pins
* SD card: set low state on bus pins while power reset
* File select: init
* File select: fix input consuming
* SD Card: fixed dir open api error
* SD-card: replace strncpy by strlcpy. Fix buffer overflow error.
* API HAL OS: replace CMP based ticks with ARR based one, hard reset lptimer on reconfiguration.
* GUI: More stack size for (temporary, wee need to implement sd card api in separate thread)
* GUI: File select module.
* App iButton-test: remove obsolete app
Co-authored-by: rusdacent <rusdacentx0x08@gmail.com>
Co-authored-by: coreglitch <mail@s3f.ru>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* add battery health reading from gauge
* add battery health reading to api-hal-power
* update battery health in power application
Co-authored-by: あく <alleteam@gmail.com>
* invert inputs
* move RFID RX to IRQ, unstable
* remove critical blink
* supress short carrier, decrease queue
* migrate to stream buffer
* enable state change
* conditions build for invert RFID IN
* move get_rfid_in_level
* use hal function for get comp level, remove duplicate interrupt registration, interrupt unregister on exit
* reinit comparator context on mode change
* Add F5 target, lp5562 driver and api-hal-light. Update api-usage, switch to F5 by default.
* API HAL: add i2c and hardware version api. Dolphin: show hardware version.
* OTP version generator and flashing utility.
* Assets script: fix code formatting
* Backport F5 changes to F4
* F4: disable insomnia, prevent damage to BLE RX path
* F5 HAL API Light: remove magic delay to fix magic BLE
* Dolphin: HW target validation on start
* invert RSSI indication in sub-1
* API HAL: rename board to body in version api
* Gpio tester: detach and release viewport on exit
Co-authored-by: aanper <mail@s3f.ru>
* Furi: replace obsolete furiac_exit with osThreadExit, drop obsolete apis and test. Rename systemd to flipper and move to separate file, cleanup. ApiHal: Rename timebase to os and move freertos hooks there, move insomnia api to power module.
* Furi: new thread helper
* Furi: cleanup thread documentation
* Flipper, AppLoader: update to use FuriThread. Update tasks signatures to match FuriThreadCallback signature.
* F4: rename API_HAL_TIMEBASE_DEBUG to API_HAL_OS_DEBUG
* Applications: rename FuriApplication to FlipperApplication, use FuriThreadCallback signature for apps.
* C++ app template sample, new exit method
* gui test app
* aligned string draw functions
* add canvas_invert_color, canvas_draw_button_left, canvas_draw_button_right
* use new str and button fns in dialog
* real dialog mockup
* add new gui test app recipe
* submenu module init
* delete unused variable
* move buttons to element, add canvas_string_width fn, new center button element
* button icons
* submenu module
* use submenu module, switch views
* keyboard buttons img
* new font for keyboard
* text input (keyboard) module
* add text input to gui test app
* add gui tesst app to release build, fix flags
* handle transition from start and end position, fix input switch
* add long text support to text input
* canvas_string_width and the underlying u8g2_GetStrWidth now return uint16_t
* remove deprecated libs and apps
* canvas_font_max_height fn
* new element, aligned multiline text
* use multiline text instead of plain string
* fix second keyboard row, rename uppercase fn
* qwerty-like keyboard layout
* new icons for iButton app
* better dialog text position and events handling
* remove confusing comment
* new extended dialog module
* extended dialog module usage
* update docs
* new gui module, popup with timeout
* popup usage
* canvas, remove outdated canvas_font_max_height, use canvas_current_font_height
* use furi check
* use new view_enter and view_exit callback for timers
* add DrZlo to gui tester codeowner
Co-authored-by: aanper <mail@s3f.ru>
* fix Werror flag
* strdup implementation fix
* fix irda and lfrdid printf
* remove unused position
* doubtful type fix
* type fix in EXTI interrupt
* fix warnings in CubeWB, need to fork ST repo
* onewire fixes
* fork STM32WB Cube repo
* SYSTEM: tickless mode with deep sleep.
* Move FreeRTOS ticks to lptim2
* API: move all sumbodules init routines to one place. Timebase: working lptim2 at tick source.
* API Timebase: lp-timer routines, timer access safe zones prediction and synchronization. FreeRTOS: adjust configuration for tickless mode.
* NFC: support for tickless mode.
* API Timebase: improve tick error handling in IRQ. Apploader: use insomnia mode to run applications.
* BLE: prevent sleep while core2 starting
* HAL: nap while in insomnia mode
* init records work
* try to implement record delete
* tests and flapp
* flapp subsystem
* new core functions to get app stat, simplify core code
* fix thread termination
* add strdup to core
* fix tests
* Refactoring: remove all unusued parts, update API usage, aggreagate API sources and headers, new record storage
* Refactoring: update furi record api usage, cleanup code
* Fix broken merge for freertos apps
* Core, Target: fix compilation warnings
* Drop firmware target local
* HAL Timebase, Power, Clock: semaphore guarded access to clock and power modes, better sleep mode.
* SD-Filesystem: wait for all deps to arrive before adding widget. Core, BLE: disable debug dump to serial.
* delete old app example-ipc
* delete old app fatfs list
* fix strobe app, add input header
* delete old display driver
* comment old app qr-code
* fix sd-card test, add forced widget update
* remove unused new core test
* increase heap to 128k
* comment and assert old core tests
* fix syntax
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* GUI: abolish API injection into instances. Update usage by 3rd party apps.
* GUI: update documentation. Cleanup api usage. Adjust status bar item spacing.
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2
Co-authored-by: aanper <mail@s3f.ru>
* fix multithread logic
* more buffer for dallas id string
* update apps to use new logic
* delay_us small speedup
* add consant qualifier to gpio records and some core api
* fix some apps to use simpler method of getting gpio record
* fix ibutton app, stupid stack problem
* variable cluster size, label info functions for targets
* app record
* init, mount, get label, get sn, get space
* enable exfat
* more stack for the stack god
* remove c app and add cpp app
* remove MULTI_PARTITION
* fix 4gb bug
* update app to new template lib, add animated waiting
* tiny buffer configuration
* write speed benchmark
* fnv1a hash library
* make DEFAULT_STACK_SIZE and MAX_TASK_COUNT defined per target
* fully functional sd card app
* build sd test app to release firmware
* cpp, not c
* light up red led if error
* flags for c++
* linking with g++
* suppres snprintf warning
* move format work area to heap
Co-authored-by: coreglitch <mail@s3f.ru>
* Assets: import from gdrive
* Assets: fully working build pipeline and registry
* NFC: menu icon
* Gui: layers. Irukagotchi: base app to handle input on idle screen. Makefile: reboot after flash in dfu mode.
* ValueMutex: with lambda
* Assets: proper animation frames sorting
* ValueMutex: proper furi_open usage
* Assets,GUI: split icon into icon data and icon state.
* Format source code
* Docker: add python3 and imagemagic
* Irukagotchi: cleanup
* GUI: event lock moved to gui.
* Rfid: proper gui layer
* GUI: elements. Menu: frame and scroll
* GUI, Menu: format code.
* Menu: dual font main menu
* Menu: format sources
* GUI: 0 total scrollbar
* CI: enable lfs
* Menu: pixel perfect main menu
Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
* add input debounce code from old fw
* exampl of input api
* change input API to get/release
* revert input API to read
* pointer instead of instance
* add input API description
* add display API
* rewrite display names
* migrate to valuemanager
* add LED API
* add closing brakets
* add sound api
* fix led api
* basic api
* rename API pages
* change pubsub implementation
* move FURI AC -> flapp, add valuemutex example, add valuemanager implementation
* pubsub usage example
* user led example
* update example
* simplify input
* add composed display
* add SPI/GPIO and CC1101 bus
* change cc1101 api
* spi api and devices
* spi api and devices
* move SPI to page, add GPIO
* not block pin open
* backlight API and more
* add minunit tests
* fix logging
* ignore unexisting time service on embedded targets
* fix warning, issue with printf
* Deprecate furi_open and furi_close (#167)
Rename existing furi_open and furi_close to deprecated version
* add exitcode
* migrate to printf
* indicate test by leds
* add testing description
* rename furi.h
* wip basic api
* add valuemutex, pubsub, split files
* add value expanders
* value mutex realization and tests
* valuemutex test added to makefile
* do not build unimplemented files
* fix build furmware target f2
* redesigned minunit tests to allow testing in separate files
* test file for valuemutex minunit testing
* minunit partial test valuemutex
* local cmsis_os2 mutex bindings
* implement furi open/create, tests
* migrate concurrent_access to ValueMutex
* add spi header
* Lib: add mlib submodule.
Co-authored-by: rusdacent <rusdacentx0x08@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* fixed inline functions for modern C standart
* more stack for application
* added library
* init fatfs library
* fatfs example application
* Merge with current master
* fix typo and delete old files
* cmsis os 2 reentrance fix
* Reworked dependency wait to support multiple dependency
* Build FatFS on local target, syscall.c is target-specific.
* run local target ok
* testcase for fatfs
Co-authored-by: aanper <mail@s3f.ru>
* Lib: move cube to libs. Firmware: prepare for code base refactoring, detach from cube, port to cmsis_os2.
* Firmware, target f2: regenerate project with latest cube package, tim17 for os ticks.
* Firmware: unified codebase.
* Core: do not include semaphore on old targets. Firmware: dfu uplaod target.
* CI: submodules, add firmware build.
* CI: proper submodule config.
* refactor build system
* CI: update chain to use new targets. Documentation: update to match current structure.
* CI: clean before rebuild.
* Add local test
docker-compose exec dev make -C firmware TARGET=local TEST=1 run
* Makefile: target specific build directory. CI: updated artifacts path.
* Makefile: init git submodules if they don't exists.
* Makefile: debug rule now doesn't reset MCU, prevent SIGINT propagation to st-util.
* Makefile: proper rebuild sequence in zz and zzz
* Makefile: timestamp tracking for flash and upload commands.
* Apps: modular build. Input: fix flipper hal inline.
* Wiki: proper bootloader link.
* Applications: fix broken build for local targets.
* add st-flash to docker
* fix build
* force rebuild app
* move app force to firmware part
* fix build deps
* qrcode build ok
* fix example display
* add testing routine
* update build instruction
Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
* add u8g2 and ui libs
* add display driver and usage example
* not init display in test mode
* change todo text
* fix removed code
* Target f2 (#107)
* add ioc for flipperzero f2
* add generated f1 files to f2
* regenerate cubemx
* invert initial state of led
* blink backligh
* shutdown backlight on idle
