unleashed-firmware/documentation/UniRFRemix.md

UniRF Remix

The UniRF Tool requires the following manual changes be made to the universal_rf_map file in the subghz/assets folder located on the sdcard.

If these custom changes are not made, you will receive an error each time you try to run the UniRF Tool.

Incorrect or unconfigured file error

If the universal_rf_map file has not been properly configured, the following error will be thrown when trying to run the UniRF Remix app:

Config is incorrect.

Please configure
universal_rf_map

Hold Back to Exit

Update: Now you can create file with .txt extension subghz/assets/universal_rf_map.txt

So it can be edited without PC, app looks for this file first, if no universal_rf_map.txt file found, standard file will be used

Setting up the subghz/assets/universal_rf_map file:

Filetype: Flipper SubGhz RAW File
Version: 1
UP: /ext/subghz/Up.sub
DOWN: /ext/subghz/Down.sub
LEFT: /ext/subghz/Left.sub
RIGHT: /ext/subghz/Right.sub
OK: /ext/subghz/Ok.sub
ULABEL: Up Label
DLABEL: Down Label
LLABEL: Left Label
RLABEL: Right Label
OKLABEL: Ok Label

The UP/DOWN/LEFT/RIGHT/OK file locations must be set to the specific file you want mapped to that directional pad direction.

The ULABEL/DLABEL/LLABEL/RLABEL/OKLABEL variables should be set to the text to be displayed for each of the files set earlier.

Example:

Filetype: Flipper SubGhz RAW File
Version: 1
UP: /ext/subghz/Fan1.sub
DOWN: /ext/subghz/Fan2.sub
LEFT: /ext/subghz/Door.sub
RIGHT: /ext/subghz/Garage3.sub
OK: /ext/subghz/Garage3l.sub
ULABEL: Fan ON
DLABEL: Fan OFF
LLABEL: Doorbell
RLABEL: Garage OPEN
OKLABEL: Garage CLOSE

Notes

• App Usage

  • Press a button to send the assigned capture file.
  • Press Back button to set how many repeats the app should send. Capped at 5 repeats.
  • Hold Back button to exit app.
  • Only RAW SubGhz captures are supported currently.
  • No skip function.

• Universal RF Map

  • Backwards compatible with jimilinuxguy Universal RF Remote map file. You should be able to use the map file as is with both versions.
  • Recommend that you update the map file (if you using "jimilinuxguy's Universal RF" file) to the version included in this repo.
  • You can also create file with .txt extension subghz/assets/universal_rf_map.txt and this file will be used instead of default file
  • File path should not have any spaces or special characters (- and _ excluded).
  • Labels are limited to 12 characters.
    • Why? This is to prevent overlapping elements on screen.
    • For example: If you set your label or file to WWWWWWWWWWWWWWW you'll be over the screen limits.