mirror of
https://github.com/DarkFlippers/unleashed-firmware.git
synced 2024-11-27 13:58:47 +03:00
79 lines
2.7 KiB
Markdown
79 lines
2.7 KiB
Markdown
# UniRF Remix
|
|
|
|
### The UniRF Tool *requires* the following manual changes be made to the `universal_rf_map` file in the `subghz/assets` folder located on the sdcard.
|
|
|
|
#### If these custom changes are not made, **you will receive an error each time you try to run the UniRF Tool**.
|
|
|
|
## Incorrect or unconfigured file error
|
|
|
|
If the `universal_rf_map` file has not been properly configured, the following error will be thrown when trying to run the UniRF Remix app:
|
|
|
|
```
|
|
Config is incorrect.
|
|
|
|
Please configure
|
|
universal_rf_map
|
|
|
|
Hold Back to Exit
|
|
```
|
|
|
|
|
|
### **Update: Now you can create file with `.txt` extension `subghz/assets/universal_rf_map.txt`**
|
|
#### **So it can be edited without PC, app looks for this file first, if no `universal_rf_map.txt` file found, standard file will be used**
|
|
|
|
|
|
## Setting up the `subghz/assets/universal_rf_map` file:
|
|
|
|
```
|
|
Filetype: Flipper SubGhz RAW File
|
|
Version: 1
|
|
UP: /ext/subghz/Up.sub
|
|
DOWN: /ext/subghz/Down.sub
|
|
LEFT: /ext/subghz/Left.sub
|
|
RIGHT: /ext/subghz/Right.sub
|
|
OK: /ext/subghz/Ok.sub
|
|
ULABEL: Up Label
|
|
DLABEL: Down Label
|
|
LLABEL: Left Label
|
|
RLABEL: Right Label
|
|
OKLABEL: Ok Label
|
|
```
|
|
|
|
The UP/DOWN/LEFT/RIGHT/OK file locations must be set to the specific file you want mapped to that directional pad direction.
|
|
|
|
The ULABEL/DLABEL/LLABEL/RLABEL/OKLABEL variables should be set to the text to be displayed for each of the files set earlier.
|
|
|
|
## Example:
|
|
|
|
```
|
|
Filetype: Flipper SubGhz RAW File
|
|
Version: 1
|
|
UP: /ext/subghz/Fan1.sub
|
|
DOWN: /ext/subghz/Fan2.sub
|
|
LEFT: /ext/subghz/Door.sub
|
|
RIGHT: /ext/subghz/Garage3.sub
|
|
OK: /ext/subghz/Garage3l.sub
|
|
ULABEL: Fan ON
|
|
DLABEL: Fan OFF
|
|
LLABEL: Doorbell
|
|
RLABEL: Garage OPEN
|
|
OKLABEL: Garage CLOSE
|
|
```
|
|
|
|
## Notes
|
|
* ##### App Usage
|
|
- Press a button to send the assigned capture file.
|
|
- Press Back button to set how many repeats the app should send. Capped at 5 repeats.
|
|
- Hold Back button to exit app.
|
|
- Only RAW SubGhz captures are supported currently.
|
|
- No skip function.
|
|
|
|
* ##### Universal RF Map
|
|
- Backwards compatible with [jimilinuxguy Universal RF Remote](https://github.com/jimilinuxguy/flipperzero-universal-rf-remote) map file. You should be able to use the map file as is with both versions.
|
|
- Recommend that you update the map file (if you using "jimilinuxguy's Universal RF" file) to the version included in this repo.
|
|
- You can also create file with `.txt` extension `subghz/assets/universal_rf_map.txt` and this file will be used instead of default file
|
|
- File path should not have any spaces or special characters (- and _ excluded).
|
|
- Labels are limited to 12 characters.
|
|
- Why? This is to prevent overlapping elements on screen.
|
|
- For example: If you set your label or file to ```WWWWWWWWWWWWWWW``` you'll be over the screen limits.
|