closes https://github.com/hasura/graphql-engine-mono/issues/2093
Problem:
- [x] Send errors to telemetry
- [x] send flags along with the command to telemetry
Solution:
- Added Error field in the data struct and if there is an error then the error will get copied to the field
- Use Visit fn in cobra for getting the flag names which are set and append the flag-names to command
https://github.com/hasura/graphql-engine-mono/pull/2298
GitOrigin-RevId: bd28c2e83e039a4eb8d7fe0d2b7646d0c982c91b
#### Issue: https://github.com/hasura/graphql-engine-mono/issues/2179
### Problem:
1. There are few warnings when tests are executed with cli if it is built with `race` flag
It is because of a race condition between stdin in migrate_delete for the prompt and stdout for other commands.
2. The integration test of the console used to behave as follows:
```
- Initially there won't be any wg.adds in wait-group so the second go-routine created in console-test (integration-test)
- It will send the interrupt signal to the channel before the server has been started
- So practically the server won't start
```
3. The read and write for consoleopts.WG has been happening in different go-routines without control or lock system(reading and writing into same memory location without lock system). So there is a chance of data-race(warning for data-race while integration tests are executed)
4. Data-race errors from `promptui` package
### Solution:
1. Use `--force` flag to avoid getting the input from the prompt in `migrate_delete_test.go`
2. Introduced two fields in server and console opts to let know other go-routines whether the server has been started or not
3. To avoid data-race above which are shared b/w go-routines to know the status of servers has been operated atomically.
4. using new package https://github.com/AlecAivazis/surveyhttps://github.com/hasura/graphql-engine-mono/pull/2231
GitOrigin-RevId: 387eb1be74f24dda34bb3588314b5a909adac227
This moves the previous (illegal) `Show` instance for `Hasura.Base.Error.Code` to a `ToJSON`
instance, and uses that in the error `ToJSON` instances.
Addressing https://github.com/hasura/graphql-engine-mono/pull/2277#issuecomment-911557169.
This PR is against #2277.
It adds a replacement derived `Show` instance, which is used:
- in the derived `Show` instance for `QErr`
- in some unit tests
Mostly verified that we didn't otherwise rely on the hand-rolled `Show`
instance by compiling without it (and a faked `QErr` instance), and seeing
that the only compile failures were in tests. (Compare the individual commits.)
https://github.com/hasura/graphql-engine-mono/pull/2279
GitOrigin-RevId: 678fe241a14bd0c9aaf5b267efc510ad9d619dd7
The materialized views cannot be mutated, so this commit removes the option to run mutation on the materialized views via graphql endpoint. Before this, users could have tried running mutation for the materialized views using the graphql endpoint (or from HGE console), which would have resulted in the following error:
``` JSON
{
"errors": [
{
"extensions": {
"internal": {
"statement": "WITH \"articles_mat_view__mutation_result_alias\" AS (DELETE FROM \"public\".\"articles_mat_view\" WHERE (('true') AND (((((\"public\".\"articles_mat_view\".\"id\") = (('20155721-961c-4d8b-a5c4-873ed62c7a61')::uuid)) AND ('true')) AND ('true')) AND ('true'))) RETURNING * ), \"articles_mat_view__all_columns_alias\" AS (SELECT \"id\" , \"author_id\" , \"content\" , \"test_col\" , \"test_col2\" FROM \"articles_mat_view__mutation_result_alias\" ) SELECT json_build_object('affected_rows', (SELECT COUNT(*) FROM \"articles_mat_view__all_columns_alias\" ) ) ",
"prepared": false,
"error": {
"exec_status": "FatalError",
"hint": null,
"message": "cannot change materialized view \"articles_mat_view\"",
"status_code": "42809",
"description": null
},
"arguments": []
},
"path": "$",
"code": "unexpected"
},
"message": "database query error"
}
]
}
```
So, we don't want to generate the mutation fields for the materialized views altogether.
https://github.com/hasura/graphql-engine-mono/pull/2226
GitOrigin-RevId: 4ef441764035a8039e1c780d454569ee1f2febc3
>
### Description
>
Correctly alias the aggregate field projections in site instead of aliasing them later stage.
PS: I discovered this required change while [developing SQL generation for MSSQL inserts](https://github.com/hasura/graphql-engine-mono/pull/2248).
### Changelog
- [ ] `CHANGELOG.md` is updated with user-facing content relevant to this PR. If no changelog is required, then add the `no-changelog-required` label.
### Affected components
- [x] Server
https://github.com/hasura/graphql-engine-mono/pull/2271
GitOrigin-RevId: 0d90fd8d8c0541b18ca9cb1197e413f3454bb227
>
### Description
>
This PR is an incremental work towards [enabling insert mutations on MSSQL](https://github.com/hasura/graphql-engine-mono/pull/1974). In this PR, we generate insert mutation schema parser for MSSQL backend.
### Changelog
- [ ] `CHANGELOG.md` is updated with user-facing content relevant to this PR. If no changelog is required, then add the `no-changelog-required` label.
### Affected components
- [x] Server
https://github.com/hasura/graphql-engine-mono/pull/2141
GitOrigin-RevId: 8595008dece35f7fded9c52e134de8b97b64f53f
When adding object relationships, we set the nullability of the generated GraphQL field based on whether the database backend enforces that the referenced data always exists. For manual relationships (corresponding to `manual_configuration`), the database backend is unaware of any relationship between data, and hence such fields are always set to be nullable.
For relationships generated from foreign key constraints (corresponding to `foreign_key_constraint_on`), we distinguish between two cases:
1. The "forward" object relationship from a referencing table (i.e. which has the foreign key constraint) to a referenced table. This should be set to be non-nullable when all referencing columns are non-nullable. But in fact, it used to set it to be non-nullable if *any* referencing column is non-nullable, which is only correct in Postgres when `MATCH FULL` is set (a flag we don't consider). This fixes that by changing a boolean conjunction to a disjunction.
2. The "reverse" object relationship from a referenced table to a referencing table which has the foreign key constraint. This should always be set to be nullable. But in fact, it used to always be set to non-nullable, as was reported in hasura/graphql-engine#7201. This fixes that.
Moreover, we have moved the computation of the nullability from `Hasura.RQL.DDL.Relationship` to `Hasura.GraphQL.Schema.Select`: this nullability used to be passed through the `riIsNullable` field of `RelInfo`, but for array relationships this information is not actually used, and moreover the remaining fields of `RelInfo` are already enough to deduce the nullability.
This also adds regression tests for both (1) and (2) above.
https://github.com/hasura/graphql-engine-mono/pull/2159
GitOrigin-RevId: 617f12765614f49746d18d3368f41dfae2f3e6ca
### Description
When running the tests with `dev.sh`, we always build the engine, before attempting to run the tests. This builds the engine twice, due to the flag change. This PR changes this to only do this first build if we're planning to actually run the integration tests.
https://github.com/hasura/graphql-engine-mono/pull/1964
GitOrigin-RevId: 32e8a6568f3665ad99adaf42421a711241974638
In hasura/graphql-engine#7172, an issue was found where under certain conditions a JSON field from Postgres would be parsed as a GraphQL input object, which is not possible in general, and also unnecessary. Luckily, this was already fixed by the time `v2.0.6` got around, presumably thanks to 4a83bb1834. This adds a regression test.
https://github.com/hasura/graphql-engine-mono/pull/2158
GitOrigin-RevId: 1ded1456f6b89726e08f77cf3383ad88c04de451
This removes the module re-exports of [Data.Align](https://hackage.haskell.org/package/semialign-1.2/docs/Data-Align.html) and [Data.These](https://hackage.haskell.org/package/these-1.1.1.1/docs/Data-These.html) from `Hasura.Prelude`. The reasoning being that they're not used widely and reasonably obscure, and that being explicit about the imports makes for an easier to understand codebase.
(I spent longer than I'd have liked earlier today figuring out where `align` in multitenant came from.
The right one not showing up on the first hoogle page doesn't help. Yes, better tool use could have
avoided that, but still...)
Do feel free to shoot this down, I won't insist on the change.
https://github.com/hasura/graphql-engine-mono/pull/2194
GitOrigin-RevId: 10f887b74538b17623bee6d6451c5aba11573fbd
- update pg-client-hs version to provide detailed listen errors
- rework multitenant schema update logging for clarity
https://github.com/hasura/graphql-engine-mono/pull/2185
GitOrigin-RevId: 43569e22df54841cf7637d37744f61f233767762
- add config api to default enabled api list
- add source key to pg_dump api ref
- add websocket-compression option to config ref
- add websocket-timeout option to config ref
- document using negative integers to decrement
- update one-to-one nested insert caveat
https://github.com/hasura/graphql-engine-mono/pull/2146
GitOrigin-RevId: d76bcdc136b2a25b9f2589155142f3272aa69c7b
