This enables tentative support for https://sw.kovidgoyal.net/kitty/keyboard-protocol
It's only been lightly tested with the notcurses-input program and
eyeballed against a few random keypresses in kitty running
`printf "\x1b[=11u" ; od -c`
I tried with neovim, but it doesn't seem like the version available
in Fedora 36 supports this yet.
refs: https://github.com/wez/wezterm/issues/1141
The heart of the issue is that `sudo -i` sets the cwd to the homedir
of the root user, and that isn't accessible to the regular unprivileged
user, and cannot be set as the cwd for the newly spawned panes/tabs.
A secondary issue is that it is hard to see what the error is without
improved diagnostics.
So this improves the diagnostics, and then changes the existence
check that we were doing for local domain spawns to try to read the
directory instead.
refs: https://github.com/wez/wezterm/issues/2120
For fonts like Lucida Console on Windows which do not have a bold
variant, we were not synthesizing bold.
The reason was that the config-level "make bold" logic works by adding
200 to the weight which takes normal -> demibold, but the bold synthesis
logic is enabled only for bold and higher.
This commit changes the threshold for synthesis to demibold or higher.
refs: https://github.com/wez/wezterm/issues/2074
harfbuzz can return incomplete overlapping runs when it processes
text in unicode NFD. Add another check for the case where we've
accumulated the bytes in the range 0-12 and then harfbuzz returns
another range of 6-12. We coalesce the two together so that we can
pass the full unresolved sequence to the next fallback pass.
refs: https://github.com/wez/wezterm/issues/2032
This, along with the plumbing included here, allows specifying
the destination of the split (now you can specify top/left, whereas
previously it was limited to right/bottom), as well as the size
of the split, and also whether the split targets the node at the
top level of the tab rather than the active pane--that is referred
to as full-width in tmux terminology.
https://github.com/wez/wezterm/issues/578
Invalid option names, or values that evaluate as nil (such as the `foo`
above: that's treated as a global variable reference, but `foo` isn't a
defined global and evaluates as `nil`) will now cause the program
startup to error out with an actionable error message.
Previously, the invalid config name would generate a warning, and the
invalid value would silently have no effect as it has the same effect as
omitting the named value and leaving it as its default value.
I think these cases should both immediately error out and stop
further processing, so that's what we're doing.
This commit also adds support for adding:
```
#[dynamic(deprecated = "use newer option instead")]
pub some_config_value: bool,
```
but not options currently use this.
To do this, we split `Pattern` into the underlying pattern for the mux
layer (which is part of the codec), and another for the config layer,
so that we can specify this new mode.
At the gui layer, we translate the selection variant into the actual
selection text and map it to the mux Pattern enum.
When taking the selection text, we restrict it to just the first line.
refs: https://github.com/wez/wezterm/issues/1912
Turn on multi-line mode by default, and improve the localpane
search function to collapse runs of trailing whitespace into
just a newline.
That allows:
```
./target/debug/wezterm -n --config 'quick_select_patterns={"foo$"}'
```
to match the first line from this, but not the second:
```
printf "foo\nfoobar\n"
```
and this to match both:
```
./target/debug/wezterm -n --config 'quick_select_patterns={"^foo"}'
```
refs: https://github.com/wez/wezterm/issues/2008
The issue here was that we'd try to match this:
```
key_event RawKeyEvent { key: Char('t'), modifiers: ALT | LEFT_ALT, phys_code: Some(T), raw_code: 17, repeat_count: 1, key_is_down: true, handled: Handled(false) }
```
which has mods=`ALT|LEFT_ALT` against `ALT` and would fail.
We need to strip out the positional ALTs from the modifiers
in order to successfully match.
refs: https://github.com/wez/wezterm/issues/1958
This change causes key table activations to effectively layer
over prior key table activations.
This is necessary for the copy mode key assignment changes to
work.
refs: https://github.com/wez/wezterm/issues/993
I've bundled this into termwiz's UnicodeVersion type as that is
a similar concept that is already routed through to the appropriate
function.
refs: https://github.com/wez/wezterm/issues/1888
The launcher menu code to perform attaching has been generalized
into a key assignment action and reimplemented in terms of that
action.
A detach action has been added to disconnect and detach.
refs: https://github.com/wez/wezterm/issues/1874
This commit allows the currently active window to:
* Spawn a new tab in the active window (rather than spawning
a new window) to host the connection status
* Auto-close that connection UI tab (rather than the whole window)
when the window is no longer needed
* Pass the current window through to use as the primary window when
assigning remote window/tabs.
The net effect of this is that there are fewer transient windows,
and that it is easier to connect a set of domains to the active
workspace.
refs: https://github.com/wez/wezterm/issues/1874
We want to avoid normalizing control key presses; there were
two places where it was happening; one in our own code and
the other was in the xkeyboard mapping stuff itself.
refs: https://github.com/wez/wezterm/issues/1851
This persuades vim to set ttymouse=sgr by default.
We're carefully sitting below 279 which triggers
some queries for things that we don't respond to yet.
refs: https://github.com/wez/wezterm/issues/1825
Some versions of fontconfig classify some fonts as having charcell
spacing. We need to consider those as monospace as well.
refs: https://github.com/wez/wezterm/issues/1820
The keys section was way too big; this splits it up into more
manageable pieces, adds a nice flow chart to show how key events
are processed and adds an example of using the new key tables feature.
A bit of a PITA, this commit:
* Introduces a DeferredKeyCode type that defers resolving a concrete
keycode
* Adds key_map_preference config which can be Mapped or Physical
* Key map building resolves the keycode using key_map_preference
* Default key assignments have been re-phrased in order to produce
DeferredKeyCodes
* User-specified keys without `mapped:` or `phys:` prefixes will
resolve according to key_map_preference
refs: https://github.com/wez/wezterm/issues/1788
refs: https://github.com/wez/wezterm/issues/1784
Previously, we'd create a clipboard handler associated with a GUI window
and take care to pass that down to the underlying Pane whenever we
spawned a new pane.
For the mux server, instead of being associated with a GUI window, the
clipboard was a special RemoteClipboard that would send a PDU through
to the client that spawned the window.
The bug here was that when that client went away, the clipboard for
that window was broken.
If the mux server was the built-in mux in a gui process this could
leave a tab without working OSC 52 clipboard support.
This commit restructures things so that the Mux is responsible for
assigning a clipboard handler that rephrases the clipboard event
as a MuxNotification.
Both the GUI frontend and the mux server dispatcher already listen
for mux notifications and translate those events into appropriate
operations on the system clipboard or Pdus to send to the client(s).
refs: #1790
After killing the remote pane, we no longer trigger the renderable
poll stuff that would detect that the pane was dead.
Let's speculatively set it to dead so that we don't get stuck with
stray tabs/panes.
https://github.com/wez/wezterm/issues/1752
There were a a couple of issues:
* `ImageData::hash` would re-hash the image on every call, and this was
called for every cell that comprised an image on the mux server side
* `SerializedLine` needed to understand how to remove the `Arc<ImageData>`
image attachments so that we didn't serialize a complete copy of the
image per cell that comprised the image.
A new RPC was introduced to attempt to fetch `ImageData` given its
content hash and pane, row and cell index as a hint to locate it.
A client side LRU of content hash to `ImageData` is used to avoid
issuing repeat calls to that new RPC.
refs: #1237
Flesh out the get_os_parameters impl for macOS. When running on a
system that provides `NSScreen::safeAreaInsets`, use that to determine
the border required to avoid the "notch" on certain models of mac.
In the GUI layer: when the os parameters include a border, adjust
the render position to account for it.
This is a bit of a speculative change, as I don't have a mac with
a notch.
refs: https://github.com/wez/wezterm/issues/1737
This helper extracts the concrete set of hosts and their configurations
from the ssh config, and arranges to reload the wezterm config if they
are changed.
This is useful when constructing ssh domain configs.
refs: https://github.com/wez/wezterm/discussions/1731
The `open` crate blocks forever when spawning the browser via xdg-open,
which feels kinda "wrong" to me, but does offer a method that can stick
that in a background thread, so that's what we do here.
refs: #1721
For a sequence like `e U+20d7` the intent is to render the `e` with
a vector arrow over the top.
This is typically implemented by fonts as an `e` followed by the
vector glyph (or vice versa), where either one of those may have
a zero advance so that the two elements are combined.
There were two problems here:
* During shaping we'd see the zero advance and assume that the entry
was useless and skip it
* During rendering, if we didn't think it had any cell width, we'd
not render it
Cursoring through that particular sequence can hide the vector
mark if the cursor is set to the default block cursor due to annoyances
in how the block cursor is rendered (it changes the fg color to match
the bg, but for elements outside where we think the cursor is, this
makes those elements invisible).
refs: https://github.com/wez/wezterm/issues/1617
Built using:
```
./FontForge-2020-11-07-21ad4a1-x86_64.AppImage --script $PWD/font-patcher "$PWD/src/unpatched-fonts/NerdFontsSymbolsOnly/NerdFontsSymbolsOnly Template 1000 em.ttf" --powerline --use-single-width-glyphs -out /tmp/nerd-fonts-out --fontawesome --fontawesomeextension --fontlinux --octicons --codicons --powersymbols --powerline --powerlineextra --mdi --weathericons
```
which is everything *except* Pomicons at the time of writing, pending
clarifications of its distribution license
(https://github.com/ryanoasis/nerd-fonts/issues/266)
refs: https://github.com/wez/wezterm/issues/1521
The issue is that we work hard to match the keys pre-composition,
but for French and Norwegian layouts ALT-number are valid,
useful punctuation keys. It's awkward to make exceptions for
ALT keys when matching assignments, especially on macOS, and
the simplest thing to do is simply to remove the assignments
and leave it to our users to add their own if they want them.
The ctrl-shift and cmd based assignments are generally much
easier to keep, because those key combinations are not widely
used default mappings on any keyboard layout.
refs: #1543
refs: #1542
refs: https://github.com/wez/wezterm/pull/1132
user vars were stubbed out. This commit adds storage for them
in the mux client and adds a new notification that publishes each
var as it is changed. That differential stream is applied to the
storage in the mux client when it is received.
```lua
local wezterm = require 'wezterm'
wezterm.on("update-right-status", function(window, pane)
local woot = pane:get_user_vars().woot
window:set_right_status(tostring(woot))
end);
return {
unix_domains = {
{name="unix"},
},
}
```
then running:
* `wezterm connect unix`
* in that session: `printf "\033]1337;SetUserVar=%s=%s\007" woot `echo -n nice | base64``
causes `nice` to show in the status area.
refs: #1528
When spawned with no WEZTERM_UNIX_SOCKET environment set,
we now prefer to resolve the gui instance, falling back to
the mux if it doesn't look like the gui is running.
`wezterm cli --prefer-mux` will use the original behavior of
trying to resolve the path from the unix domain in the config.
This commit adds a couple of helper methods that provide insight into
the state of the keyboard layer.
The intent is for users to add status information about the keyboard
state.
This commit also ensures that we schedule an update when the leader
key duration expires, and ensures that we close out the leader state
for an invalid key press.
refs: #686closes: #688
```lua
local wezterm = require 'wezterm';
wezterm.on("update-right-status", function(window, pane)
local leader = ""
if window:leader_is_active() then
leader = "LEADER"
end
local dead = ""
if window:dead_key_active() then
dead = "DEAD"
end
window:set_right_status(leader .. " " .. dead)
end);
return {
leader = { key="a", mods="CTRL" },
colors = {
dead_key_cursor = "orange",
},
}
```
Previously, we'd take a couple of guesses at how to map the key
to a utf8 value, but! the keyboard state has a method that can tell
us what to use.
This is important in non-latin keymaps where, for example, the `c`
key generates cyrillic small letter es and we'd end up sending
CTRL + that through to the terminal when CTRL is held down.
If we get the utf8 string from the keyboard layer then we get
CTRL+c instead, and that is what we want.
refs: https://github.com/wez/wezterm/issues/678
Certain keys are "handled" by the IME through it generating a "noop"
command.
That's not super useful for us, so this commit detects the noop case
and then treats it as though the IME didn't handle the input event.
While implementing the above fix, I realized that the same technique
could be used more generally to return processing to our main input
handling for the various selectors that we do recognize: we were
essentially inferring the original key combinations based on the
selector which is not scalable and potentially lossy.
We can't capture CTRL-ESC this same way, as that key combination
is magical and is routed to the callback without generating any
key events.
refs: https://github.com/wez/wezterm/issues/615
refs: https://github.com/wez/wezterm/issues/975
refs: https://github.com/wez/wezterm/pull/1410
We only need to recompute when the tab content changes, or when
the window is resized, plus invalidations of the shape cache
of texture atlas filling up.
Hover events don't need to re-shape.
We can now also place the tab bar at the bottom of the screen again.
This adds string serialization for the keycode and modifiers as
used in the config.
We can't simply tell the base types to serialize in this form because
we may serialize and pass those via the mux protocol and the default
derived serializers are more efficient for that purpose.
This allows:
```lua
local wezterm = require 'wezterm'
return {
keys = {
{key="a", mods="ALT", action=wezterm.action{SendKey={key="b"}}}
},
}
```
to parse: previously, wrapping `SendKey` in `wezterm.action` would fail
to round-trip the the `SendKey` and lead to an error loading the
config.
Add `get_foreground_process_name` to both Pane and the lua wrapper.
Add `foreground_process_name` and `current_working_dir` fields to
`PaneInformation`. In order for those to be dynamically fetched,
switch the lua conversion for `PaneInformation` to be a UserData
with field access methods. It's a little more verbose but allows
us to lazily compute these two new fields.
refs: https://github.com/wez/wezterm/discussions/1421
refs: https://github.com/wez/wezterm/issues/915
refs: https://github.com/wez/wezterm/issues/876
This is really a timing issue: if shift-click extension of the mouse
selection is used, the user may release the mouse button slightly
after the SHIFT key (which is fine) or vice versa (which was not
previously matched)
refs: #1204
This commit expands quick select mode so that you can trigger it
with distinct sets of patterns (eg: urls on one key assignment,
hashes on a different key assignment), different alphabets,
and lastly, the option to perform a different action from
the default copy action.
You can pair this with `action_callback` to run lua code to
do something with the selected text.
This commit also adds `wezterm.open_with`, a helper function
for opening documents/URLs.
refs: #846
refs: #1362
Remove special case for blocks where we switched it out for a blank
sprite and instead varied the cell background.
We now always render a matching cursor sprite as a separate layer
over the top of the text background color, but below the text
foreground layer.
This is preparing for https://github.com/wez/wezterm/issues/1432
Make bar/line cursors use the text foreground color when reverse
video cursors are enabled, per @VKondakoff:
https://github.com/wez/wezterm/issues/1076#issuecomment-978214136
`wezterm.font` and `wezterm.font_with_fallback` can now specify
harfbuzz_features and freetype load/render target and flags as
options on a per-font basis.
This allows you to do things such as adjust shaping (eg: ligatures) or
rendering (eg: disable bitmaps, or adjust hinting) for a single font in
a fallback rather than globally for all fonts.
This commit teaches `RgbColor::from_rgb_str` to support
colors in the form `hsl:235 100 50`, an HSL colorspace
color specification.
While banging my head on why my test wasn't passing, I realized
that this was producing 10 bpc color and the code to convert
those to RGB was incorrectly multiplying conversion terms!
refs: https://github.com/wez/wezterm/issues/1436
Finally getting around to fixing this usability wart: this commit
changes the behavior of Window closing so that you can close a window
containing multiplexer panes without prompting and without killing
off those panes.
This is achieved through some plumbing:
* The mux can now advise Domains about an impending window closure,
giving them the opportunity to "do things" in readiness.
* The mux client domain informs the container ClientPane instances
to ignore the next Pane::kill call, which would otherwise inform
the mux server to kill the remote pane
* Pane:can_close_without_prompting now requires a CloseReason.
* ClientPane's can_close_without_prompting impl allows Window closing
without prompting on the assumption that the ignore-next-kill hack
above is working
refs: #848
refs: #917
refs: #1224
This commit adds plumbing to support mapping the process tree to
lua objects which in turn allows a new `mux-is-process-stateful`
event to be defined by the user for finer control over closing
prompt behavior.
refs: #1412
As promised in the previous commit, this one implements an escape
sequence to control the unicode version.
Unknown to me in the previous commit, iTerm2 already defines such
an escape sequence, so we simply implement it here with the same
semantics.
refs: #1231
refs: #997
We rely on using freetype in order to support more fonts in more
situations, and we have a deeper existing integration with harfbuzz.
I'm unlikely to come back to allsorts to complete our integration,
and in the meantime, it just adds overhead to build/test and those
builds are taking longer and longer.
I loved the idea of using pure rust for all the font stuff, but
its time is not now.
closes: #587closes: #66
It appears as though Menlo is the only font on macos to contain the
heavy ballot cross symbol, which is commonly used on macos (eg: in
`brew` output).
Our fallback list, despite starting with Menlo, didn't include menlo
itself in the candidates.
Furthermore, `ls-fonts` wouldn never see the result of the system
fallback resolution because it didn't know to try again, and was
using the list of handles from before the fallback.
This commit resolves all of these concerns.
refs: #849
This commit introduces the `Dimension` type which allows specifying
a value in a variety of units; pixels, points, cells, percent.
`Dimension` needs contextual information to be evaluated as pixel
values, which makes resolving the value from the config slightly
more of a chore.
However, this type allows more flexible configurations that scale
with the font size and display dpi.
refs: #1124, #291, #195
More of a "fix"; we use some heuristics based on the bearing
and glyph width to figure out if a sequence looks like a funky
ligature that moves left to render the glyph.
This may be prone to false positives, but the consequences are low:
when we think a glyph is part of a ligature, then rather than using
the cursor_fg color (which is typically black, or close to invisible),
we retain the normal text fg color.
This way the portion of the glyph outside of the cursor retains its
foreground color, and just the cell containing the cursor may have
a slightly funky fg color in the case where the heuristic was bad.
closes: #478
We now compute the cap-height from the rasterized glyph data.
Moved the scaling action of use_cap_height_to_scale_fallback_fonts from
glyphcache into the font resolver: when enabled, and we have data
about the baseline font and the font being resolved, then the resolving
font will be scaled such that the cap-height of both fonts has the same
pixel size.
The effect of this is that `I` glyphs from both fonts should appear to
have the same height.
Added a row of `I`'s in differing styles at the bottom of styles.txt
to make this easier to visualize.
refs: #1189
This is to handle situations such as some versions of the Terminus
bitmap font, where the individual bitmap strike sizes are broken
out across multiple individual files.
Font matching now passes down the nominal pixel height based on
the current DPI and font scale factor, and will use that to select
the font file that has the closest pixel size.
Previously, it would be potentially undefined which of the Terminus
font files would be selected.
refs: https://github.com/wez/wezterm/issues/1189
This font is a bit funky; the bitmap strikes are only 4px wide:
```
; ftdump gohufont.otb
There is 1 face in this file.
----- Face number: 0 -----
font name entries
family: Gohu GohuFont
style: Regular
postscript: UNAVAILABLE
created: 1904-01-01
modified: 1904-01-01
revision: 1.00
glyph count: 1694
font type entries
FreeType driver: truetype
sfnt wrapped: yes
type: fixed size
direction: horizontal
fixed width: no
glyph names: no
fixed size
0: height 11, width 3
size 11.000, x_ppem 11.000, y_ppem 11.000
1: height 14, width 4
size 14.000, x_ppem 14.000, y_ppem 14.000
charmaps (1)
0: format 4, platform 3, encoding 1 language 0 (active)
```
but using that the cell size isn't right.
We draw from the metrics we compute via cell_metrics to get more
information; we don't get a valid height from that (just 0!), but
we do get the much more plausible width of 8 pixels.
So we take the max of the two techniques for figuring the metrics.
That appears to work out, and also doesn't appear to break emoji
fonts.
refs: #1165
This commit adjusts the the window event routing/queuing so that
a queued event can capture a pane_id other than the focused pane.
Since we only allow one queued instance of a given named event in a
window, a consequence of this is that multiple bell events coming
from different panes at the same time may race and the loser's
event will be dropped. We log a warning in that case.
refs: #3
This was a bit of a PITA to run down; the essence of the problem
was that the shaper was returning an x_advance of 0 for U+3000,
which caused wezterm's shaping layer to elide that glyph.
I eventually tracked down the x_advance to be the result of
scaling by an x_scale of 0, which in turn is the result of
harfbuzz not knowing the font size.
The critical portion of this diff is the line that advises
harfbuzz that the font has changed after we've applied the
font size.
The rest is just stuff to make it easier to debug and verify.
This:
```
printf "x\u3000x."
```
Now correctly renders on screen as "x x".
fixes: #1161
This commit introduces a mechanism for specifying resize increments
for a window, and then arranges for the termwindow to set those
to match the current font cell metrics.
This should help to avoid cases where there is excess padding pixels
resulting from the window being slightly larger than computed number
of cells and the font metrics.
It appears as though kakoune hides the terminal cursor and renders
its own version of the cursor.
The hidden state was being picked up by the copymode overlay,
making it awkward to use.
This commit forces the cursor to be visible (and a block) when
copy mode is active.
closes: #1113
Not sure what happened here: presumably a borked merge or something
similar, but this commit allows `window:get_appearance` to return
the actual appearance value on X11.
Even though this plumbs the call through to Wayland, Wayland doesn't
provide an equivalent concept so still always return Light, as is
mentioned on our docs.
closes: #1098
This commit annotates fonts with a boolean that indicates whether
we think it contains glyphs with emoji presentation, and then
passes the cluster.presentation field down to the shaper.
If the presentation doesn't match the current font in the fallback,
then it will be skipped until we exhaust its options.
`wezterm ls-fonts` also shows whether we think a font has emoji
presentation.
refs: #997
Test scenario is:
* Create a split
* in each pane run: `printf "\e[?1004h" ; od -c`
* Focus the panes, focus another window, and focus the window again
* The I and O events appear in the panes when changing their focus.
* Previously, only the active pane would get focus events when the
window focus changed.
refs: https://github.com/wez/wezterm/issues/941
The man page states:
> For each parameter, the first obtained value will be used.
but then later says:
> It is possible to have multiple identity files specified in
> configuration files; all these identities will be tried in sequence.
> Multiple IdentityFile directives will add to the list of identities
> tried (this behaviour differs from that of other configuration
> directives).
So that's what this commit does
The main culprit was the calloop feature that is used by default
in the underlying SCTK crate.
This commit:
* Routes keyboard processing via the same keyboard mapping code
that we use for X11
* Implements key repeats directly, and with awareness of elapsed
time in case the repeat rate is quicker than the event dispatching
quantum
* Disables the calloop feature of SCTK and let us do our own polling
of the wayland connection.
Critically, key repeat is sticky and unpredictable while calloop is
enabled.
closes: #669
The issue is that the pane was only removed from the tab when explicitly
closed, leaving it to be later detected and flushed.
However, in the meantime, when performing eg: cursor blink maintenance,
if the set of panes in the tab is empty then the window would close.
The resolution is to ask the mux (rather than the tab) to kill the pane,
so that the cascading closure of the tab causes the window's active
tab to reference the correct remaining tab.
refs: #890
neovim doesn't like it when multiple drag events with the same
coordinates are received; it appears to treat that as though
the mouse button was double clicked.
This commit teaches the mouse report encoding to suppress multiple
drag events in succession that have the same payload.
refs: https://github.com/wez/wezterm/discussions/823
This looks like a honest typo from when panes were introduced!
We were passing the tab id rather than the pane id when specifying
the target of a split.
likely fix for this issue:
refs: https://github.com/wez/wezterm/issues/781
Since removing the regular periodic background tasks, we're now
prone to not noticing child processes exiting.
This commit explicictly schedules a thread to do that on Windows
so that we can close a tab as soon as it exits.
This commit adds a slant to *scalable* (not bitmap!) fonts whose
originating font attributes requested italics but for for which
the resolved face is not italic.
refs: #815
The status information now explains the exit status and the
exit_behavior, as well as links to the docs on exit_behavior.
refs: https://github.com/wez/wezterm/issues/795
Two issues here:
* The hue angles need adjusting to work with the palette library
* The resultant RGB color had the wrong gamma level, resulting in
an overly bright image.
refs: https://github.com/wez/wezterm/issues/775
There were two bugs here:
* \u8D (the utf8 encoded representation of 0x8d, aka: RI) was not
recognized as a C1 code and was instead passed through as printable
text.
* The \u8D is a zero-width sequence which means that a subsequent
set_cell call on the new empty-by-default line wouldn't allocate
any cells in the line array, and the assigment to the line would
panic.
This commit avoids the panic for the second case, and then fixes up
the vtparser to correctly recognize the sequence as a C1 control.
refs: https://github.com/wez/wezterm/issues/768
Since the original code was written, Rust grew and stabilized
an interface for specifying argv0 for the child process, so
we can remove the fragile `-l` argument passing.
refs: https://github.com/wez/wezterm/issues/753
It's not perfect; this only handles the case where you move down
into the terminal. I couldn't easily make the same thing happen
when moving the mouse up or left outside of the window. It's
probably fixable but this is better than it was.
closes: https://github.com/wez/wezterm/issues/591
* Make alphabet and patterns configurable
* add docs
* Enhance scrollback search to support regex captures so that
searching for eg: `fo(o)` will select the last `o` in `foo`.
refs: https://github.com/wez/wezterm/issues/732
We weren't fixing up the active tab position correctly after removing
a tab. I think this bug crept in around the ActivateLastTab changes.
We now try harder to set active idx back to the tab that was active
prior to the remove, and ensure that we set the active index to
something within range if it was the active tab that was removed.
Refs: https://github.com/wez/wezterm/issues/690
