This is really a proof of concept commit; I want to be able to pass
more structured data into the shader as uniforms and the basic
macros provided by glium make that a bit awkward.
What I came up with is a slightly more dynamic uniform builder
thingy.
I'm using this to pass in a copy of the various blinking easing
functions.
Those are incomplete and unused, but it shows that the technique works.
It's not the first time that I've solved a problem by slowing things
down... in this situation, a couple of very inefficient TUI programs had
flickering outputs in wezterm because they were filling a buffer with a
bunch of spaces to erase a screen before sending the main body of their
updates in a subsequent buffer chunk. wezterm would render the
intervening partially blank frame and appear to flicker.
The resolution is to add a small delay (3ms by default) before sending
data to the terminal model. If the output is readable in that time
we'll accumulate it with the pending set of actions so that the
whole batch can be applied "more atomically".
Take care: `time cat bigfile` is sensitive to this, so we want to
keep the latency as small as possible, and we also want to avoid
accumulating actions and only flushing them at the end of the file.
We use the existing buffer size (~1MB) as a threshold: we bump
a count of the number of input bytes that resulted in the current
set of actions, and if that exceeds that buffer size we flush it.
refs: https://github.com/wez/wezterm/issues/2443
The prior mutually exclusive behavior kept surprising people so let's
just flip this around.
This is potentially a "breaking" change for folks, but I think it is
worth it.
Allows the following assignment actions; I was just over-using z for
no real reason, I'm not suggesting that these are good assignments.
```
-- move the cursor backwards to the start of the current zone, or
-- to the prior zone if already at the start
{ key = 'z', mods = 'NONE', action = act.CopyMode 'MoveBackwardSemanticZone' },
-- move the cursor forwards to the start of the next zone
{ key = 'Z', mods = 'NONE', action = act.CopyMode 'MoveForwardSemanticZone' },
-- start selecting by zone: both the start point and the cursor
-- position will be expanded to the containing zone and the union
-- of those two will be used for the selection
{
key = 'z',
mods = 'CTRL',
action = act.CopyMode { SetSelectionMode = 'SemanticZone' },
},
-- like MoveBackwardSemanticZone by only considers zones of the
-- specified type
{ key = 'z', mods = 'ALT', action = act.CopyMode { MoveBackwardZoneOfType ='Output' }},
-- like MoveForwardSemanticZone by only considers zones of the
-- specified type
{ key = 'Z', mods = 'ALT', action = act.CopyMode { MoveForwardZoneOfType ='Output' }},
```
refs: https://github.com/wez/wezterm/issues/2346
They prevented using other types of mouse events!
We don't have a good way to specify that kind of alias, so for now,
take it out and replace the examples in the docs with the more verbose
equivalents.
refs: #2173
refs: #2296
Adjusts how mouse events are matched so that we can now indicate whether
mouse reporting and alt-screen should be considered as part of the event
trigger criteria.
refs: #2173
refs: #581
This doesn't really change any behavior, but adjusts the types
such that CSIs that set colors have the potential to track the
alpha channel and that can make it through to the GUI/render layer.
The recent work on the scrollback made it easier to constrain the
search region, so expose those parameters to the Pane::search
interface and to the mux protocol.
Use those new parameters to constrain quickselect search to
1000 rows above and below the current viewport by default, and
add a new parameter to QuickSelectArgs that allows overriding that
range.
A follow-up commit could make the search/copy overlay issue a series
of searches in chunks so that it avoids blocking the UI when
searching very large scrollback.
refs: https://github.com/wez/wezterm/pull/1317
Various color schemes have been duplicated as they have been added to
different scheme collections. They don't always have identical names
(eg: some remove spaces) and sometimes they have very different names
(eg: _bash vs. nightfox, or Miu vs. Blazer).
We already detected duplicates from different collections but previously
we would omit those dupes.
This commit allows us to track those duplicates by recording their
aliases.
When we write out our data, we only include "interesting" alias names;
those where the name isn't trivially identical.
Some scheme collections (eg: iterm2 color schemes) have duplicates
(eg: zenbones and zenbones_light are identical) and we have previously
shipped with both of those names, so we special case to emit dupes
for which we have prior version information in order to avoid
breaking backwards compatibility for our users.
In the doc generation we can generate links to the aliases if we
included them, but also note about the other names and how we don't
include them. That is so that someone searching the docs for say
"_bash" can discover that it is actually a duplicate of "nightfox" and
use nightfox instead.
This allows the hook to choose how to handle eg: `wezterm start -- top`.
Previously, if you had implemented this event you would essentially lose
the ability to specify a command that you wanted to launch.
refs: https://github.com/wez/wezterm/issues/284
I needed this while swinging through to the new color scheme data stuff,
but I don't need it any more, and it causes problems with external toml
files.
Record the version in which we first saw a color scheme.
For schemes from iterm2-color-schemes, we just assume that
we've had them forever as it isn't easy to reverse engineer
that metadata.
Everything else is tagged as 'nightly builds only' and I'll update
that to match the version number in the next release.
Newly discovered items will be added with 'nightly builds only'
from this point onwards.
Originally I had names like `base 16:foo` but wanted `foo` to
sort with `f` rather than `b`, so this prefix extraction
handled that.
I later changed the names to be `foo (base 16)` so we don't
need this.
This moves the `X::Erosion` scheme to sort under `x` where it
feels more natural.
Ensure that scheme_data.rs has a deterministic sort order that
matches the json data.
Adjust importer to read directly from the source .itermcolors
files in the upstream repo. Extract some author information
from the comments in those files.
All data is now fetched (and cached!) via relatively minimal
http requests rather than requiring a git repo locally.
Also search for .yml files in base16 repos; found another
couple of schemes this way.
The toml files under assets/colors are no longer read by
anything in the repo. I plan to remove them, but since the
docs reference them as examples, I will first ensure that
there are docs and tooling that explains how to write and
share your own scheme files.
It's now possible to specify a validation function for config
items.
Use that to validate line_height:
```
; ./target/debug/wezterm --config line_height=-1
08:41:10.576 ERROR wezterm > Error converting lua value from overrides to Config struct: Error processing Config::line_height: Illegal value -1 for line_height; it must be positive and greater than zero!; terminating
```
refs: https://github.com/wez/wezterm/issues/2247
Moved the gradient function into the color module, but kept an alias
under the old name.
Gradients now return color objects.
Converting colors to string now uses rgba format when alpha is not 100%.
The intent is that when set, it changes defaults to something
more suitable for distributions.
I've also added a readme for distro maintainers.
refs: https://github.com/wez/wezterm/issues/1795
This commit expands the toml file definition to include
metadata for the origin url, author and name.
A new sync utility fills out that metadata when it pulls from the iterm2
color schemes repo.
The utility also pulls down the scheme data json maintained by
the Gogh project: https://gogh-co.github.io/Gogh/ and converts
it to wezterm's format.
About 50% of Gogh overlaps with iterm2; we take the iterm2 versions
of those schemes by default because the iterm2 data has more info
about things like cursor and selection colors.
The sync utility is responsible for compiling the de-duplicated
set of scheme data into a form that is used by wezterm and its
docs.
The fixup callback can now by async, which makes it possible to use
other async functions in the callback.
There is an additional parameter to wezterm.exec_domain that allows
setting the label that is shown in the launcher menu.
It accepts either a string value or an async callback function
that can be used to compute the label dynamically.
An ExecDomain is a variation on WslDomain with the key difference
being that you can control how to map the command that would be
executed.
The idea is that the user can define eg: a domain for a docker
container, or a domain that chooses to run every command in its
own cgroup.
The example below shows a really crappy implementation as a
demonstration:
```
local wezterm = require 'wezterm'
return {
exec_domains = {
-- Commands executed in the woot domain have "WOOT" echoed
-- first and are then run via bash.
-- `cmd` is a SpawnCommand
wezterm.exec_domain("woot", function(cmd)
if cmd.args then
cmd.args = {
"bash",
"-c",
"echo WOOT && " .. wezterm.shell_join_args(cmd.args)
}
end
-- you must return the SpawnCommand that will be run
return cmd
end),
},
default_domain = "woot",
}
```
This commit unfortunately does more than should go into a single
commit, but I'm a bit too lazy to wrangle splitting it up.
* Reverts the nil/null stuff from #2177 and makes the
`ExtendSelectionToMouseCursor` parameter mandatory to dodge
a whole load of urgh around nil in table values. That is
necessary because SpawnCommand uses optional fields and the
userdata proxy was making that a PITA.
* Adds some shell quoting helper functions
* Adds ExecDomain itself, which is really just a way to
to run a callback to fixup the command that will be run.
That command is converted to a SpawnCommand for the callback
to process in lua and return an adjusted version of it,
then converted back to a command builder for execution.
refs: https://github.com/wez/wezterm/issues/1776
This commit adjusts the config loading code so that we can return
information about the paths the should be watched for a subsequent
reload even in the more common error cases.
refs: #1174
- Add regex that captures URLs with IP addresses as hosts.
- Removed redundant non-capturing parentheses from the first regex.
Mirrored the change to default_hyperlink_rules().
- Switched all but the first example to use literal strings for
regex (more readable).
Adds a configuration option, `focus_change_repaint_delay` to allow customisation of the delay added in 9b6329b454.
The default delay remains 100ms, and can be disabled by setting it to `0`, if the workaround is not required on the user's system.
refs: #2063
refs: #1992
Main thing to note here is that the open crate has deprecated
open::that_in_background, but made open::that non-blocking.
I think this is OK, but I'm a little cagey about what will
happen with this on Windows. We may need to spawn our own
thread for this if things go awry.
Freetype has a compile-time feature that, when enabled, rewrites the
font names of PCF fonts to include the foundry and wide status of the
font in order to disambiguate the various versions of fonts all named
"Fixed".
That option is enabled by default in some linux distributions but not
all; it's not enabled in Fedora, for example.
When that feature is enabled it causes problems for the Terminus font as
the PCF version of the fonts are no longer resolvable via the simple
"Terminus" name but via "xos4 Terminus" instead.
wezterm builds its own version of freetype (for consistency and cross
platform support reasons), and is unaware of the choice used by the
distro.
The result of that is that fontconfig may see PCF fonts as having
different font names than how wezterm sees them.
A concrete problem is on such a system, when requesting "xos4 Terminus",
fontconfig will present a match with that name, but when wezterm opens
the font and sees that it has name "Terminus" (because of the difference
in this feature in the freetype libraries in use), wezterm will reject
that match.
This commit enables that option in the freetype library and adds a
wezterm config level option (freetype_pcf_long_family_names) that can be
used to control the underlying pcf font driver configuration.
The upshot of this is that this commit doesn't change any default
behavior, but allows users of those systems to set
`freetype_pcf_long_family_names = true` to turn that behavior on.
My personal opinion on this is that users probably shouldn't use this if
they can avoid it (and PCF fonts in general), and instead install the
OTB version of the Terminus font, which doesn't have this legacy baggage
associated with it!
refs: https://github.com/wez/wezterm/issues/2100
This allows moving past a number of outdated deps, but importantly,
allows updating miow to a version that has the correct memory layout
for SocketAddr, and satisfies a dependabot alert.
I did an ad-hoc test where I set the new tab button background to
an Animated value and saw that it eased in and out.
However, this commit doesn't make anything use this yet.
Useful if you want to add smaller items to your background layers
every so often; you can specify the distance between them and make
it independent of the item height.
The color can have alpha and blend with other layers.
This is helpful if your image has fully transparent portions
and you want to explicitly place a color in there.
The `File` variant for background layers may now be an object
that specifes a speed factor. That factor is applied to the
animation frame durations in the loaded image, allowing the
playback rate to be adjusted.
This adds some types that will enable richer background images.
* Can specify multiple layers
* Each layer can select from image files or gradient definitions
* Layers have additional properties to specify positioning, scaling,
tiling and whether they scroll with the viewport.
None of the additional properties are hooked up yet.
Wraps up the changes from the following diff and allows for the modal
layer (and box model) to use alpha for poly quads.
Change the default background color for pane select to be slightly
transparent.
This is still a bit of a WIP, but this commit:
* Introduces a new "Modal" concept to the GUI layer. The intent is
that modal intercepts key and mouse events while active, and renders
over the top of the rest of the normal display.
I think there might be a couple of cases where key events skirt
through this, but this is good enough as a first step.
Also, the render is forced into layer 1 which has some funny side
effects: if the modal choses to render transparent, it will poke
a hole in the window because all the rendering happens together:
there aren't distinct layer compositing passes.
* Add a new PaneSelect action that is implemented as a modal.
It uses quickselect style alphabet -> pane label generation and
renders the labels over ~the middle of each pane using an
enlarged version of the window frame font. Typing the label
will activate that pane. Escape will cancel the modal.
More styling and docs will follow in a later commit.
refs: #1975
This, along with the plumbing included here, allows specifying
the destination of the split (now you can specify top/left, whereas
previously it was limited to right/bottom), as well as the size
of the split, and also whether the split targets the node at the
top level of the tab rather than the active pane--that is referred
to as full-width in tmux terminology.
https://github.com/wez/wezterm/issues/578
Invalid option names, or values that evaluate as nil (such as the `foo`
above: that's treated as a global variable reference, but `foo` isn't a
defined global and evaluates as `nil`) will now cause the program
startup to error out with an actionable error message.
Previously, the invalid config name would generate a warning, and the
invalid value would silently have no effect as it has the same effect as
omitting the named value and leaving it as its default value.
I think these cases should both immediately error out and stop
further processing, so that's what we're doing.
This commit also adds support for adding:
```
#[dynamic(deprecated = "use newer option instead")]
pub some_config_value: bool,
```
but not options currently use this.
To do this, we split `Pattern` into the underlying pattern for the mux
layer (which is part of the codec), and another for the config layer,
so that we can specify this new mode.
At the gui layer, we translate the selection variant into the actual
selection text and map it to the mux Pattern enum.
When taking the selection text, we restrict it to just the first line.
refs: https://github.com/wez/wezterm/issues/1912
Avoid using serde for mapping between Lua and Rust for the `Config`
struct.
This improves the build speed of the config crate by 2x; it goes down
from 30 seconds to 9 seconds on my 5950x.
* Add support for drag and drop files in Windows
* Add two drag and drop filename quoting patterns (mainly) for Windows, change doc examples.
* Code style cleanup
* Improve Windows quoting pattern and rename DoubleQuoteAlways to WindowsAlwaysQuoted
* Improve special char finding for DroppedFileQuoting::Windows and fix doc.
The copy overlay now has a notion of running in search mode vs. copy
mode; it can be launched in either mode.
Search mode has a separate key table called `search_mode`.
Activating copy mode while search mode is active will now update
the mode of the existing overlay, rather than cancelling and creating
a new instance, and vice versa.
Activating copy mode while search mode is active will replace the
current key table activation (which is assumed to be `copy_mode`)
with `search_mode`, and vice versa.
The viewport is no longer scrolled to the bottom when activating search
mode.
refs: https://github.com/wez/wezterm/issues/993
refs: https://github.com/wez/wezterm/issues/1592
I've bundled this into termwiz's UnicodeVersion type as that is
a similar concept that is already routed through to the appropriate
function.
refs: https://github.com/wez/wezterm/issues/1888
The launcher menu code to perform attaching has been generalized
into a key assignment action and reimplemented in terms of that
action.
A detach action has been added to disconnect and detach.
refs: https://github.com/wez/wezterm/issues/1874
Create a list of command definitions to hold the default key
assignments.
That list has more metadata, such as a brief and longer human
readable description of the purpose, and allows for (in the
future) reasoning about the context where the command is valid,
as well as providing more information when rendering in the
launcher menu.
refs: https://github.com/wez/wezterm/issues/1485
We're now capable of remembering an alpha value for everything
in the palette and the main window theme, but not the tab bar theme.
Whether the alpha is correctly respected at render time is a different
story!
refs: #1835
Go directly to the underlying env_logger crate, as pretty_env_logger
hasn't been updated in some time, and I'd like to be able to redirect
the log output to a file more directly, and that feature is in a newer
version of the env logger than pretty_env_logger was pulling in.
When considering "F" we'd try to parse it as "F<NUMBER>" and fail,
so fall back to producing `Physical(F)` instead.
Since this was in the context of CMD-F in the default keymap code,
we'd then generate ctrl-F as an equivalent when considering the
ctrl-shift case.
cc: @CIAvash
The recent switch to DeferredKeyCode introduced a bit of ambiguity
when parsing certain keys.
One issue was with the map that was used for some parsing didn't have
consistent/distinct entries for physical vs. mapped.
Another issue is that the key resolution for the simple case where
a key had the same physical and mapped representations would always
return the mapped one even when physical mode was set as a preference.
This commit kills the ambiguous map in favor of an string conversion
method on KeyCode.
It's possible that this will help with https://github.com/wez/wezterm/issues/1826
a little, but I started looking at this because there were a couple of
comments about Alt-Enter and some numpad keys no longer working in the
Element channel.
This is definitely in the band-aid category, but two issues have
mentioned the AA in custom block glyphs recently.
This commit adds an `anti_alias_custom_block_glyphs` option that can be
set to false to prevent the custom block glyphs from enabling AA.
I think a better long term fix would be some kind of hinting to avoid
the degenerate AA case, but when I made an enquiry about this class of
issue in tiny skia in the past, the author didn't want to diverge from
skia-compatible behavior, so I think we'd need to find (or build!) an
alternative rasterizer for these path instructions.
refs: https://github.com/wez/wezterm/issues/1753
refs: #1817
`ActivateKeyTable` pushes a new named key table entry onto the stack.
It has some parameters:
* name - required; the name of a entry in `key_tables` that should be
activated.
* timeout_milliseconds - how long the entry should remain active.
When this duration elapses, the entry will pop itself from the
stack. If omitted, the entry will not pop itself due to time.
* one_shot - if true (or omitted; true is default), the entry will pop
itself after one use. If false the entry will not pop itself after use.
But note that if timeout_milliseconds is set then it may pop itself
due to time.
* replace_current - if true, will pop the current stack entry before
activating the current entry. Most useful when combined with some
other one_shot=false activation.
`PopKeyTable` explicitly pops the top of the key table stack.
Most useful with `one_shot=false` activations.
`ClearKeyTableStack` clears the key table stack. Most useful with
`one_shot=false` activations.
```
local wezterm = require 'wezterm';
wezterm.on("update-right-status", function(window, pane)
local name = window:active_key_table()
if name then
name = "TABLE: " .. name
end
window:set_right_status(name or "")
end);
return {
debug_key_events = true,
keys = {
-- Activate the "woot" table as a one-shot with
-- a 2 second timeout, after which it will restore
-- the default table.
{
key="a", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
timeout_milliseconds=2000,
}
}
},
-- Activate the "woot" table.
-- The table will remain active until explicitly popped
-- by the `PopKeyTable` action. See the Escape binding below!
{
key="b", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
one_shot = false,
}
}
},
-- Activate the "woot" table as a one-shot with
-- no timeout. It will remain active until a key is pressed,
-- after which is will restore the default table.
{
key="c", mods="CTRL",
action=wezterm.action{
ActivateKeyTable={
name="woot",
}
}
},
},
key_tables = {
woot = {
{key="a", action=wezterm.action{SendString="woot"}},
{key="Escape", action="PopKeyTable"},
},
},
}
```
This commit introduces a new `key_tables` config option that allows
defining named groups of key assignments, but that have no effect yet.
To support this change, the InputMap type has been adjusted to allow
for the idea that multiple tables can exist.
refs: https://github.com/wez/wezterm/discussions/1812
A bit of a PITA, this commit:
* Introduces a DeferredKeyCode type that defers resolving a concrete
keycode
* Adds key_map_preference config which can be Mapped or Physical
* Key map building resolves the keycode using key_map_preference
* Default key assignments have been re-phrased in order to produce
DeferredKeyCodes
* User-specified keys without `mapped:` or `phys:` prefixes will
resolve according to key_map_preference
refs: https://github.com/wez/wezterm/issues/1788
refs: https://github.com/wez/wezterm/issues/1784
This commit allows specifying a scaling factor as part of the font
attribute definition. This scaling factor is fed through to the
rasterizer and the shaper to adjust the actual font size that is
loaded.
The intent is to provide manual control for situations where the
fallback font has a different scale to the primary font and renders
either too small or too large.
The concrete example is
https://github.com/wez/wezterm/issues/1761#issuecomment-1079708207 where
the CJK fallback looks too small.
The scaling factor doesn't influence font metrics so it may also be
desirable to configure line height.
```lua
local wezterm = require 'wezterm'
return {
line_height = 1.2,
font = wezterm.font_with_fallback({
"JetBrains Mono",
{family="Microsoft YaHei", scale=1.5},
}),
}
```
Separates out window vs pane click-to-focus behavior more distinctly,
and fixes up the behavior when
swallow_mouse_click_on_window_focus=false.
refs: #1540
This helper extracts the concrete set of hosts and their configurations
from the ssh config, and arranges to reload the wezterm config if they
are changed.
This is useful when constructing ssh domain configs.
refs: https://github.com/wez/wezterm/discussions/1731
after reading around italic vs. oblique, I think "slant" is a misleading
way to categorize this, as slant implies something about the angle of
the font but really the difference between italic and oblique is purely
stylistic and without a suggested angle.
style more closely matches the CSS name which is well understood by
many, so we go for that.
refs: #1646
There are three slants that are broadly recognized; normal, italic and
oblique. Prior to this commit, we only considered normal or italic.
This is mostly a mechanical change to replace the boolean with the enum,
and rename the field from `italic` to `slant`.
For the sake of backwards compatibility with existing configs, the lua
helpers for working with fonts continue to accept boolean italic values
and rewrite them to the equivalent slant value.
refs: #1646
This commit allows the following configuration:
```
wezterm -n --config 'colors = { selection_fg = "clear", selection_bg = "rgba:50% 50% 50% 50%" }'
```
which sets the selection_bg to fully transparent, and selection_bg to
50% transparent gray.
When selection_fg is fully transparent we'll use the normal fg color.
When selection_bg is partially (or fully!) transparent, it will be
alpha blended over the current cell background color.
To support this, the config file will now accept rgba colors specified
as 4 whitespace delimited numeric values. If a value ends with `%` it
is interpreted as a number in the range 0-100. Otherwise, it is
interpreted as a number in the range 0-255. The 4 values are
red, green, blue, alpha.
At this time, only the selection_fg and selection_bg settings accept
alpha values.
refs: #1615
This commit does two related things, from opposite ends of the spectrum:
* Sets the sticky bit on pid files and unix sockets to avoid tmpwatch
deleting them in cleanup scenarios
* Falls back to looking at the changed time if the filesystem doesn't
support reporting creation time when wezterm does its own liveness
and cleanup checks for unix domain sockets in the runtime dir
* Allow any wezterm instance to perform that cleanup
refs: #1601
This commit refines bidi property handling:
* experimental_bidi has been split into two new configuration settings;
`bidi_enabled` (which controls whether the terminal performs implicit
bidi processing) and `bidi_direction` which specifies the base
direction and whether auto detection is enabled.
* The `Line` type can now store those bidi properties (they are actually
split across 3 bits representing enabled, auto-detection and
direction)
* The terminal now has a concept of active bidi properties and default
bidi properties
* The default properties are pulled from the wezterm configuration
* active bidi properties are potentially set via escape sequences,
BDSM (which sets bidi_enabled) and SCP (which sets bidi_direction).
We don't support the 2501 temporary dec private mode suggested by
the BIDI recommendation doc at this time.
* When creating new `Line`'s or clearing from the start of a `Line`, the
effective bidi properties are computed (from the active props,
falling back to default propr) and applied to the `Line`.
* When rendering the line, we now look at its bidi properties instead
of just the global config.
The default bidi properties are `bidi_enabled: false` and
`bidi_direction: LeftToRight` which corresponds to the typical
bidi-unaware mode of most terminals.
It is possible to live reload the config to change the effective
defaults, but note that they apply, by design, to new lines being
processed through the terminal. That means existing output is
left unaffected by a config reload, but subsequently printed lines
will respect it. Pressing CTRL-L or otherwise contriving to have
the running application refresh its display should cause the
refreshed display to update and apply the new bidi mode.
refs: #784
Introduce a new config knob called 'local_echo_threshold_ms' to let
users configure when the local echo prediction should kick in. The
default value is 100ms to retain the current behavior.
This commit is larger than it appears to due fanout from threading
through bidi parameters. The main changes are:
* When clustering cells, add an additional phase to resolve embedding
levels and further sub-divide a cluster based on the resolved bidi
runs; this is where we get the direction for a run and this needs
to be passed through to the shaper.
* When doing bidi, the forced cluster boundary hack that we use to
de-ligature when cursoring through text needs to be disabled,
otherwise the cursor appears to push/rotate the text in that
cluster when moving through it! We'll need to find a different
way to handle shading the cursor that eliminates the original
cursor/ligature/black issue.
* In the shaper, the logic for coalescing unresolved runs for font
fallback assumed LTR and needed to be adjusted to cluster RTL.
That meant also computing a little index of codepoint lengths.
* Added `experimental_bidi` boolean option that defaults to false.
When enabled, it activates the bidi processing phase in clustering
with a strong hint that the paragraph is LTR.
This implementation is incomplete and/or wrong for a number of cases:
* The config option should probably allow specifying the paragraph
direction hint to use by default.
* https://terminal-wg.pages.freedesktop.org/bidi/recommendation/paragraphs.html
recommends that bidi be applied to logical lines, not physical
lines (or really: ranges within physical lines) that we're doing
at the moment
* The paragraph direction hint should be overridden by cell attributes
and other escapes; see 85a6b178cf
and probably others.
However, as of this commit, if you `experimental_bidi=true` then
```
echo This is RTL -> عربي فارسی bidi
```
(that text was sourced from:
https://github.com/microsoft/terminal/issues/538#issuecomment-677017322)
then wezterm will display the text in the same order as the text
renders in Chrome for that github comment.
```
; ./target/debug/wezterm --config experimental_bidi=false ls-fonts --text "عربي فارسی ->"
LeftToRight
0 ع \u{639} x_adv=8 glyph=300 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
2 ر \u{631} x_adv=3.78125 glyph=273 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
4 ب \u{628} x_adv=4 glyph=244 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
6 ي \u{64a} x_adv=4 glyph=363 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
8 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
9 ف \u{641} x_adv=11 glyph=328 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
11 ا \u{627} x_adv=4 glyph=240 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
13 ر \u{631} x_adv=3.78125 glyph=273 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
15 س \u{633} x_adv=10 glyph=278 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
17 ی \u{6cc} x_adv=4 glyph=664 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
19 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
20 - \u{2d} x_adv=8 glyph=276 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
21 > \u{3e} x_adv=8 glyph=338 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
```
```
; ./target/debug/wezterm --config experimental_bidi=true ls-fonts --text "عربي فارسی ->"
RightToLeft
17 ی \u{6cc} x_adv=9 glyph=906 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
15 س \u{633} x_adv=10 glyph=277 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
13 ر \u{631} x_adv=4.78125 glyph=272 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
11 ا \u{627} x_adv=4 glyph=241 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
9 ف \u{641} x_adv=5 glyph=329 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
8 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
6 ي \u{64a} x_adv=9 glyph=904 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
4 ب \u{628} x_adv=4 glyph=243 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
2 ر \u{631} x_adv=5 glyph=273 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
0 ع \u{639} x_adv=6 glyph=301 wezterm.font(".Geeza Pro Interface", {weight="Regular", stretch="Normal", italic=false})
/System/Library/Fonts/GeezaPro.ttc index=2 variation=0, CoreText
LeftToRight
0 \u{20} x_adv=8 glyph=2 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
1 - \u{2d} x_adv=8 glyph=480 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
2 > \u{3e} x_adv=8 glyph=470 wezterm.font("Operator Mono SSm Lig", {weight="DemiLight", stretch="Normal", italic=false})
/Users/wez/.fonts/OperatorMonoSSmLig-Medium.otf, FontDirs
;
```
refs: https://github.com/wez/wezterm/issues/784
This setting now allows specifying what the canonical format is;
previously it was a boolean that meant "don't change anything"
if false, and rewrite to CRLF if true.
It's now an enum with None, CR, LF, and CRLF variants that express
more control.
The config accepts true (maps to CRLF) and false (maps to None)
for backwards compatibility.
The default behavior is unchanged by this commit, however, I did
uncover a bug in the canonicalizer for inputs like `\r\r\n`.
refs: #1575
I generated nerdfonts_data.rs with this shell script; it uses `i_all.sh`
from the nerdfonts repo to get the base mapping:
```
source ./lib/i_all.sh
echo "//! Data mapping nerd font symbol names to their char codepoints"
echo "pub const NERD_FONT_GLYPHS: &[(&str, char)] = &["
for var in "${!i@}"; do
# trim 'i_' prefix
glyph_name=${var#*_}
glyph_char=${!var}
glyph_code=$(printf "%x" "'$glyph_char'")
echo "(\"$glyph_name\", '\u{$glyph_code}'), // $glyph_char"
done
echo "];"
```
Then intent is to use it in wezterm:
```
local wezterm = require 'wezterm'
wezterm.log_info(wezterm.nerdfonts.dev_mozilla)
```
Built using:
```
./FontForge-2020-11-07-21ad4a1-x86_64.AppImage --script $PWD/font-patcher "$PWD/src/unpatched-fonts/NerdFontsSymbolsOnly/NerdFontsSymbolsOnly Template 1000 em.ttf" --powerline --use-single-width-glyphs -out /tmp/nerd-fonts-out --fontawesome --fontawesomeextension --fontlinux --octicons --codicons --powersymbols --powerline --powerlineextra --mdi --weathericons
```
which is everything *except* Pomicons at the time of writing, pending
clarifications of its distribution license
(https://github.com/ryanoasis/nerd-fonts/issues/266)
refs: https://github.com/wez/wezterm/issues/1521
This action causes the active workspace for the gui to change.
If the name is omitted a random name will be generated.
If the workspace doesn't exist, it will be be created.
The optional spawn parameter can be used to launch a specific
program into the new workspace; if omitted, the default prog
will be used.
The gui only supports a single active workspace. Switching workspaces
will repurpose existing gui windows and re-assign them to windows
in the new workspace, adjusting their size to fit those windows,
spawning new windows or closing unused windows as required.
The gui now exits when there are no panes in the active workspace,
rather than no panes at all.
refs: #1531
Tidies up some code duplication within the mux protocol handler.
Move some of the logic into Mux, remove legacy Spawn Pdu to reduce
more duplication.
I want to dedup some of the similar logic that exists in the gui
spawn implementation as well in a follow up.
The issue is that we work hard to match the keys pre-composition,
but for French and Norwegian layouts ALT-number are valid,
useful punctuation keys. It's awkward to make exceptions for
ALT keys when matching assignments, especially on macOS, and
the simplest thing to do is simply to remove the assignments
and leave it to our users to add their own if they want them.
The ctrl-shift and cmd based assignments are generally much
easier to keep, because those key combinations are not widely
used default mappings on any keyboard layout.
refs: #1543
refs: #1542
refs: https://github.com/wez/wezterm/pull/1132
This resolves some issues with non-US layouts (French, Norweigan)
where ALT-number are important and useful punctuation that we were
otherwise blocking.
This new behavior seems consistent with eg: vte terminals on linux
when switching to a French layout.
refs: #1543
refs: #1542
`ScrollByPage` can accept non-integer values in the configuration.
This allows fractional page scrolling, such as by half a page.
The default remains the same, at 1 page.
If we know that the remote host is a unix system, and that it uses some
version of the posix shell, then we can adjust our command line to cd to
the requested directory (as set by OSC 7) and then exec the requested
command.
That's what SshDomain::assume_unix indicates and what this commit does.
This puts us in a better position for the future to be able
to configure whether we use wezterm, tmux or no multiplexing.
Today we allow wezterm or no multiplexing.
Add docs on this new setting.
refs: https://github.com/wez/wezterm/issues/1456
That top level config/src/lib.rs has been too big for too long.
Break it up a little.
(I recommend running `cargo clean` if you're updating across
this change to avoid a rust ICE with it cached on-disk state)
Previously, it would skip loading the initial config and allow
loading it later by using the reload hotkey. That reload behavior
was an accident!
Another problem with the old approach is that everything else was
set up as if the config had been loaded, which is now causing
confusion for code that wants to decide whether we are using
that configuration or not.
This commit formalizes the skip by remembering that state globally.
This change helps to simplify some special cases around command
line overrides as well, as well as allows cli overrides to take
effect when the user doesn't have a config file.
They have their own versions of these options, and logically it doesn't
make sense to use the default_prog from the `local` domain with a wsl
domain.
refs: #1242
This returns the default set of domains that would be populated
in the wsl_domains config. This is useful if you want to override
eg: the default_prog for specific domain(s), or want to otherwise
add additional variations on the default list.
When set, changes the default domain to the domain with the specified
name, which potentially affects the default program.
eg: default_domain = "WSL:Ubuntu-18.04" will cause the initial tab
to be spawned via WSL.
The idea is that we want to be able to spawn into wsl with the
convenience of a local domain, but without the awkwardness of
it having a different filesystem namespace.
It would also be great to be able to spawn a new tab or pane
in the same domain and pick up the cwd of the existing one.
The WslDomain allows the user to explicitly list WslDomains
and control eg: default shell, username and so on, but wezterm
will pre-fill a default list of domains based on the `wsl -l`
output that we were already using in the launcher menu.
The existing LocalDomain has been augmented to understand that
it may need to fixup a command invocation and that gives it
the opportunity to rewrite the command so that we can launch
it via `wsl.exe` and pass down the cwd and so on.
This same technique might be extensible to eg: docker instances
in the future.
This commit:
* Introduces `wsl_domains` config and its default list of wsl
distributions
* Creates LocalDomain instances from that list
* The launcher menu allows spawning a new tab via one of those domains
Using the new publish/discovery stuff from the past couple of commits,
if we can find a matching socket path for a running gui, and the
configuration is likely a match, then use the mux protocol to talk
to the already running gui and ask it to spawn the equivalent program
into the same process.
refs: https://github.com/wez/wezterm/discussions/1486
We need 100% of the info for it to work correctly, so this commit:
* Exposes the keyboard encoding mode via the Pane trait
* Adds the scan code to the RawKeyEvent
* Has the GUI perform the encoding if the keyboard is set that way
* Removes the basic encoder from termwiz in favor of the gui level one
The net result is that we bypass the Pane::key_up/Pane::key_down methods
in almost all cases when the encoding mode is set to win32-input-mode.
There is now a config option: allow_win32_input_mode that can be
used to prevent using this mode.
refs: #1509
* Allow selecting the first few rows by number
* Allow scrolling through long lists of items
* Add actions from key assignments to list
refs: #1485
refs: #1413
This commit adjusts the config parsing layer so that:
```
return {
keys = {
{key="a", ...}
}
}
```
is now treated as being implicitly the same as `key="phys:A"`.
You can explicitly use `key="mapped:a"` to use the post-keyboard-map
processed value of a key to trigger an assignment, rather than
the physical key location.
refs: #1483
When set, the cursor will change to this color during dead key
or leader key processing.
```lua
return {
colors = {
dead_key_cursor = "orange",
},
}
```
refs: #686
refs: #688
