Using `Threadpool` and `TimerQueue` which are provided by the native
Windows APIs, to implement the corresponding interfaces, we do not need
to sort tasks ourselves as Windows will handle it in a relatively more
efficient manner, I guess. I am unsure if Zed would welcome this PR, and
suggestions are welcome.
Release Notes:
- N/A
This PR adds a new `rems_from_px` helper function that can be used to
compute rem values based on a pixel value.
This is something we do fairly commonly, where we want to express a size
that is a given pixel size at the base rem size (e.g., "14px when the
rem size is 16px").
`rems_from_px` helps make the intent more explicit, as well as prevent
the base rem size from being duplicated everywhere.
Note: Ideally we would want `rems_from_px` to be `const`, but that
depends on https://github.com/rust-lang/rust/issues/57241.
Release Notes:
- N/A
This PR promotes the allowance of the
[`clippy::single_range_in_vec_init`](https://rust-lang.github.io/rust-clippy/master/index.html#/single_range_in_vec_init)
rule to a permanent one.
This rule complains about a pretty common pattern we use that doesn't
seem to have any adverse effects, so we're going to continue allowing
this rule.
Release Notes:
- N/A
Three changes: two of which are changing `while let` construct to `if
let` as they unconditionally broke and one of which was removing a loop
in the `start_default_prettier` as it unconditionally broke in the
control flow for match installation task: the diff for this is larger
than needed as removing the loop changed a lot of indentation for
`rustfmt`.
This PR updates the README to include Homebrew installation instructions
for the preview version and adds a link to the Homebrew homepage.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This PR restores the `--all-targets` flag when running `cargo clippy`.
Without it, there are areas that Clippy does not check, as evidenced by
the violations that were caught once the flag was re-added.
Release Notes:
- N/A
We noticed that when you open a lot of files (i.e. project-wide search
with multi-buffer) that the main thread can become unresponsive, because
while we are async, we still load these files on the main thread.
What this change does is it uses `smol::unblock` to load files on a
different thread.
Release Notes:
- Improved responsiveness when loading files into memory.
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Kirill <kirill@zed.dev>
This avoids the problem of a search being kicked off involuntarily and
potentially using a large amount of CPU when toggling on the `Search
Ignored Files` option.
What would happen is that someone would turn the option on, we'd kick
off a search, and go through all of the files in, say, `node_modules`.
Even if no query was given.
This avoids that.
Release Notes:
- Fixed an empty search being kicked off involuntarily if no query was
typed in yet but an option was toggled.
Fixes
https://github.com/orgs/zed-industries/projects/14/views/1?pane=issue&itemId=56263346
Fixes a state where Zed multi buffers were not reachable after going to
an excerpt inside it (with alt-enter).
I suspect, we will have to come back to multi buffer history and check
the way it behaves on inner excerpts clicking, but now this change seems
to restore the main thing: multi buffers not being shown in the history
at all.
Release Notes:
- Fixes "go backwards" not considering multibuffers in history
The important change here is to ensure that undo never lands you in
visual mode; but we also take care to restore the selection the same way
vim does (visual line goes to beginning of line, visual block to the top
left, etc.).
To help make this behaviour feel right we also group any deletions that
started insert mode with the first text inserted.
Fixes: #7521
Release Notes:
- vim: Improved undo. It will now restore you to normal mode in the same
position as vim, and group deletions caused by `c` or `s` with the
concomitant insert.
([#7521](https://github.com/zed-industries/zed/issues/7521)).
Several improvements in how various markers are displayed in the editor
scrollbar, as described in #9070, if you're ok with the proposal:
- Scrollbar has three columns:
- 1st is for git markers
- 2nd is for selections and search resulta highlightings
- 3rd is for diagnostics
- Height of all markers is scaled, but there's a minimal allowed height
of 2px.
- Right border removed from both the scrollbar and thumb to make more
room for markers.
Release Notes:
- Improved scrollbar markers visualization (#9070).
Co-Authored-By: Max <max@zed.dev>
Co-Authored-By: Marshall <marshall@zed.dev>
Release Notes:
- Fixed a bug where text styles could leak between frames (preview only)
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Marshall <marshall@zed.dev>
Tested on my laptop, and I've noticed that when I move the window,
`WindowsPlatform::displays()` is being continuously called. Is this
intended?
Release Notes:
- N/A
### Description
Currently, there are some issues with input handling on Windows:
#### 1. Direct crash when encountering IME input.
https://github.com/zed-industries/zed/assets/14981363/598f7272-1948-4a42-99c5-2ef7b9162a1e
#### 2. Handling messages every 1/60 seconds in the main thread. Despite
being named "immediate_handle," it's not exactly immediate.
```rust
// actually halt here
let wait_result =
unsafe { DCompositionWaitForCompositorClock(Some(&[self.inner.event]), INFINITE) };
// compositor clock ticked so we should draw a frame
if wait_result == 1 {
unsafe { invalidate_thread_windows(GetCurrentThreadId()) };
while unsafe { PeekMessageW(&mut msg, HWND::default(), 0, 0, PM_REMOVE) }.as_bool()
```
#### 3. According to Windows recommendations, character input should be
obtained using `WM_CHAR` instead of `WM_KEYDOWN`. Additionally, there
are problems with the handling within `WM_CHAR`.
```rust
fn handle_char_msg(&self, wparam: WPARAM) -> LRESULT {
let mut callbacks = self.callbacks.borrow_mut();
if let Some(callback) = callbacks.input.as_mut() {
let modifiers = self.current_modifiers();
let msg_char = wparam.0 as u8 as char; // these are u16 chars, cant treat them as u8
```
And, we don't handle `WM_SYSKEYDOWN` properly, which leads to `Alt + F4`
not working.
Release Notes:
- N/A
This fixes#9292 by adding a section to the language server settings
that allows users to specify the binary path and arguments with which to
start up a language server.
Example user settings for `rust-analyzer`:
```json
{
"lsp": {
"rust-analyzer": {
"binary": {
"path": "/Users/thorstenball/tmp/rust-analyzer-aarch64-apple-darwin",
"arguments": ["--no-log-buffering"]
}
}
}
}
```
Constraints:
* Right now this only allows ABSOLUTE paths.
* This is only used by `rust-analyzer` integration right now, but the
setting can be used for other language servers. We just need to update
the adapters to also respect that setting.
Release Notes:
- Added ability to specify `rust-analyzer` binary `path` (must be
absolute) and `arguments` in user settings. Example: `{"lsp":
{"rust-analyzer": {"binary": {"path": "/my/abs/path/rust-analyzer",
"arguments": ["--no-log-buffering"] }}}}`
([#9292](https://github.com/zed-industries/zed/issues/9292)).
Co-authored-by: Ricard Mallafre <rikitzzz@gmail.com>
Closes#5178
Release Notes:
- Added a `file_types` setting that can be used to associate languages
with file names and file extensions. For example, to interpret all `.c`
files as C++, and files called `MyLockFile` as TOML, add the following
to `settings.json`:
```json
{
"file_types": {
"C++": ["c"],
"TOML": ["MyLockFile"]
}
}
```
As with most zed settings, this can be configured on a per-directory
basis by including a local `.zed/settings.json` file in that directory.
---------
Co-authored-by: Marshall <marshall@zed.dev>
Before this change, the hitbox felt one-sided because the cursor didn't
consistently change into the drag-handle cursor.
The reason was that we didn't trigger a redraw on hover, so we'd only
change the cursor if we detected hover AND something else caused a
redraw.
Release Notes:
- Fixed the pane resize handler not consistently triggering on mouse
hover.
Co-authored-by: Antonio <antonio@zed.dev>
This avoids calling `window.setDelegate(nil)` when the window was
already closed.
Release Notes:
- Fixed a segfault that could show up when closing windows.
Co-authored-by: Antonio <antonio@zed.dev>
Before this change we didn't consistently trigger focus events when
toggling between with windows `Cmd-backtick`. We only triggered them
when the OS decided to trigger a redraw.
That lead to a nasty bug that showed up in Vim mode where a cursor would
still be active in the hidden window, even though it was deactivated.
One then had to manually try to trigger a focus event in the new window
to activate the cursor.
With this change, we call `cx.refresh` when the window activation status
changed which triggers focus events consistently and fixes this bug.
With logging we can observe this:
**BEFORE**:
https://github.com/zed-industries/zed/assets/1185253/e1ad8878-129c-44ba-9d8b-c720f9dca5b6
**AFTER**:
https://github.com/zed-industries/zed/assets/1185253/733fdadb-d1ea-47fe-a2c1-7b50af299cc0
Release Notes:
- Fixed focus not being consistently changed when switching between
multiple Zed windows via `Cmd-backtick`.
---------
Co-authored-by: Manu Raj <git@manuraj.dev>
Co-authored-by: Antonio <antonio@zed.dev>
Switch to using `x11rb` crate instead of current `xcb` crate for gpui's
x11 platform.
Also fixes the crash on resize, and white flashing on resize.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR changes GPUI to open windows with a default size and location,
and to otherwise inherit from their spawning window.
Note: The linux build now crashes on startup.
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Ezekiel Warren <zaucy@users.noreply.github.com>
