For a long time, we've had problems where diagnostics can end up showing
up inconsistently in different views. This PR is my attempt to prevent
that, and to simplify the system in the process. There are some UX
changes.
Diagnostic behaviors that have *not* changed:
* In-buffer diagnostics update immediately when LSPs send diagnostics
updates.
* The diagnostic counts in the status bar indicator also update
immediately.
Diagnostic behaviors that this PR changes:
* [x] The tab title for the project diagnostics view now simply shows
the same counts as the status bar indicator - the project's current
totals. Previously, this tab title showed something slightly different -
the numbers of diagnostics *currently shown* in the diagnostics view's
excerpts. But it was pretty confusing that you could sometimes see two
different diagnostic counts.
* [x] The project diagnostics view **never** updates its excerpts while
the user might be in the middle of typing it that view, unless the user
expressed an intent for the excerpts to update (by e.g. saving the
buffer). This was the behavior we originally implemented, but has
changed a few times since then, in attempts to fix other issues. I've
restored that invariant.
Times when the excerpts will update:
* diagnostics are updated while the diagnostics view is not focused
* the user changes focus away from the diagnostics view
* the language server sends a `work done progress end` message for its
disk-based diagnostics token (i.e. cargo check finishes)
* the user saves a buffer associated with a language server, and then a
debounce timer expires
* [x] The project diagnostics view indicates when its diagnostics are
stale. States:
* when diagnostics have been updated while the diagnostics view was
focused:
* the indicator shows a 'refresh' icon
* clicking the indicator updates the excerpts
* when diagnostics have been updated, but a file has been saved, so that
the diagnostics will soon update, the indicator is disabled
With these UX changes, the only 'complex' part of the our diagnostics
presentation is the Project Diagnostics view's excerpt management,
because it needs to implement the deferred updates in order to avoid
disrupting the user while they may be typing. I want to take some steps
to reduce the potential for bugs in this view.
* [x] Reduce the amount of state that the view uses, and simplify its
implementation
* [x] Add a randomized test that checks the invariant that a mutated
diagnostics view matches a freshly computed diagnostics view
## Release Notes
- Reworked the project diagnostics view:
- Fixed an issue where the project diagnostics view could update its
excerpts while you were typing in it.
- Fixed bugs where the project diagnostics view could show the wrong
excerpts.
- Changed the diagnostics view to always update its excerpts eagerly
when not focused.
- Added an indicator to the project diagnostics view's toolbar, showing
when diagnostics have been changed.
---------
Co-authored-by: Richard Feldman <oss@rtfeldman.com>
This PR extracts Elixir support into an extension and removes the
built-in Elixir support from Zed.
As part of this, [Lexical](https://github.com/lexical-lsp/lexical) has
been added as an available language server for Elixir.
Since the Elixir extension provides three different language servers,
you'll need to use the `language_servers` setting to select the one you
want to use:
#### Elixir LS
```json
{
"languages": {
"Elixir": {
"language_servers": [ "elixir-ls", "!next-ls", "!lexical", "..."]
}
}
}
```
#### Next LS
```json
{
"languages": {
"Elixir": {
"language_servers": [ "next-ls", "!elixir-ls", "!lexical", "..."]
}
}
}
```
#### Lexical
```json
{
"languages": {
"Elixir": {
"language_servers": [ "lexical", "!elixir-ls", "!next-ls", "..."]
}
}
}
```
These can either go in your user settings or your project settings.
Release Notes:
- Removed built-in support for Elixir, in favor of making it available
as an extension.
Release Notes:
- N/A
Picks up https://github.com/kvark/blade/pull/113 and a bunch of other
fixes.
Should prevent the exclusive full-screen on Vulkan - related to #9728
cc @kazatsuyu
Note: this PR doesn't enable transparency, this is left to follow-up
use winresource for crates/zed and crates/storybook. tested on
`x86_64-pc-windows-gnu`. on `x86_64-pc-windows-msvc` I receive a error
message, that looks like a problem with my machine
Release Notes:
- N/A
This PR extracts Deno support into an extension and removes the built-in
Deno support from Zed.
When using the Deno extension, you'll want to add the following to your
settings to disable the built-in TypeScript and ESLint language servers
so that they don't conflict with Deno's functionality:
```json
{
"languages": {
"TypeScript": {
"language_servers": ["deno", "!typescript-language-server", "!eslint", "..."]
},
"TSX": {
"language_servers": ["deno", "!typescript-language-server", "!eslint", "..."]
}
}
}
```
Release Notes:
- Removed built-in support for Deno, in favor of making it available as
an extension.
This PR adds a new `language_servers` setting underneath the language
settings.
This setting controls which of the available language servers for a
given language will run.
The `language_servers` setting is an array of strings. Each item in the
array must be either:
- A language server ID (e.g., `"rust-analyzer"`,
`"typescript-language-server"`, `"eslint"`, etc.) denoting a language
server that should be enabled.
- A language server ID prefixed with a `!` (e.g., `"!rust-analyzer"`,
`"!typescript-language-server"`, `"!eslint"`, etc.) denoting a language
server that should be disabled.
- A `"..."` placeholder, which will be replaced by the remaining
available language servers that haven't already been mentioned in the
array.
For example, to enable the Biome language server in place of the default
TypeScript language server, you would add the following to your
settings:
```json
{
"languages": {
"TypeScript": {
"language_servers": ["biome", "!typescript-language-server", "..."]
}
}
}
```
More details can be found in #10906.
Release Notes:
- Added `language_servers` setting to language settings for customizing
which language server(s) run for a given language.
This is a crate only addition of a new version of the AssistantPanel.
We'll be putting this behind a feature flag while we iron out the new
experience.
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio Scandurra <antonio@zed.dev>
Co-authored-by: Nate Butler <nate@zed.dev>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Co-authored-by: Max <max@zed.dev>
Release Notes:
- Made remote projects per-user instead of per-channel. If you'd like to
be part of the remote development alpha, please email hi@zed.dev.
---------
Co-authored-by: Bennet Bo Fenner <53836821+bennetbo@users.noreply.github.com>
Co-authored-by: Bennet <bennetbo@gmx.de>
Co-authored-by: Nate Butler <1714999+iamnbutler@users.noreply.github.com>
Co-authored-by: Nate Butler <iamnbutler@gmail.com>
I'm not a huge fan of this change (& I expect the placement to change).
The plan is to have the button in a toolbar of terminal panel, but I'm
not sure if occupying a whole line of vertical space for a single button
is worth it; I suppose we might want to put more of tasks ui inside of
that toolbar.
Release Notes:
- Removed task status indicator and added "Spawn task" action to
terminal panel context menu.
With this commit, it is now possible to invoke cli with a release
channel of bundle as an argument. E.g: `zed stable some_arguments` will
find CLI binary of Stable channel installed on your machine and invoke
it with `some_arguments` (so the first argument is essentially omitted).
Fixes#10851
Release Notes:
- CLI now accepts an optional name of release channel as it's first
argument. For example, `zed stable` will always use your Stable
installation's CLI. Trailing args are passed along.
This PR adds an action to expand the excerpts lines of context in a
multibuffer.
Release Notes:
- Added an `editor::ExpandExcerpts` action (bound to `shift-enter` by
default), which can expand the excerpt the cursor is currently in by 3
lines. You can customize the number of lines by rebinding this action
like so:
```json5
// In your keybindings array...
{
"context": "Editor && mode == full",
"bindings": {
"shift-enter": ["editor::ExpandExcerpts", { "lines": 5 }],
}
}
```
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Max <max@zed.dev>
Part of https://github.com/zed-industries/zed/issues/5141
* adds "run selection" and "run file" tasks for bash and Python.
* replaces newlines with `\n` symbols in the human-readable task labels
* properly escapes task command arguments when spawning the task in
terminal
Caveats:
* bash tasks will always use user's default shell to spawn the
selections, but they should rather respect the shebang line even if it's
not selected
* Python tasks will always use `python3` to spawn its tasks now, as
there's no proper mechanism in Zed to deal with different Python
executables
Release Notes:
- Added tasks for bash and Python to execute selections and open files
in terminal
This PR extracts Vue support into an extension and removes the built-in
C# support from Zed.
Release Notes:
- Removed built-in support for Vue, in favor of making it available as
an extension. The Vue extension will be suggested for download when you
open a `.vue` file.
---------
Co-authored-by: Max <max@zed.dev>
This introduces semantic indexing in Zed based on chunking text from
files in the developer's workspace and creating vector embeddings using
an embedding model. As part of this, we've created an embeddings
provider trait that allows us to work with OpenAI, a local Ollama model,
or a Zed hosted embedding.
The semantic index is built by breaking down text for known
(programming) languages into manageable chunks that are smaller than the
max token size. Each chunk is then fed to a language model to create a
high dimensional vector which is then normalized to a unit vector to
allow fast comparison with other vectors with a simple dot product.
Alongside the vector, we store the path of the file and the range within
the document where the vector was sourced from.
Zed will soon grok contextual similarity across different text snippets,
allowing for natural language search beyond keyword matching. This is
being put together both for human-based search as well as providing
results to Large Language Models to allow them to refine how they help
developers.
Remaining todo:
* [x] Change `provider` to `model` within the zed hosted embeddings
database (as its currently a combo of the provider and the model in one
name)
Release Notes:
- N/A
---------
Co-authored-by: Nathan Sobo <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Co-authored-by: Antonio <antonio@zed.dev>
This reverts commit caed275fbf.
NOTE: this should not be merged until #9668 is on stable and the
`ZedVersion#can_collaborate` is updated to exclude all clients without
that change.
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
This PR bumps the TOML extension to v0.1.0.
This version of the extension has been updated to use v0.0.6 of the
`zed_extension_api`.
Release Notes:
- N/A
This PR bumps the Zig extension to v0.1.0.
This version of the extension has been updated to use v0.0.6 of the
`zed_extension_api`.
It also adds support for treating `.zig.zon` files as Zig files
(#10012).
Release Notes:
- N/A
This PR extracts Terraform support into an extension and removes the
built-in Terraform support from Zed.
Release Notes:
- Removed built-in support for Terraform, in favor of making it
available as
an extension. The Terraform extension will be suggested for download
when you
open a `.tf`, `.tfvars`, or `.hcl` file.
This PR implements the preview tabs feature from VSCode.
More details and thanks for the head start of the implementation here
#6782.
Here is what I have observed from using the vscode implementation ([x]
-> already implemented):
- [x] Single click on project file opens tab as preview
- [x] Double click on item in project panel opens tab as permanent
- [x] Double click on the tab makes it permanent
- [x] Navigating away from the tab makes the tab permanent and the new
tab is shown as preview (e.g. GoToReference)
- [x] Existing preview tab is reused when opening a new tab
- [x] Dragging tab to the same/another panel makes the tab permanent
- [x] Opening a tab from the file finder makes the tab permanent
- [x] Editing a preview tab will make the tab permanent
- [x] Using the space key in the project panel opens the tab as preview
- [x] Handle navigation history correctly (restore a preview tab as
preview as well)
- [x] Restore preview tabs after restarting
- [x] Support opening files from file finder in preview mode (vscode:
"Enable Preview From Quick Open")
I need to do some more testing of the vscode implementation, there might
be other behaviors/workflows which im not aware of that open an item as
preview/make them permanent.
Showcase:
https://github.com/zed-industries/zed/assets/53836821/9be16515-c740-4905-bea1-88871112ef86
TODOs
- [x] Provide `enable_preview_tabs` setting
- [x] Write some tests
- [x] How should we handle this in collaboration mode (have not tested
the behavior so far)
- [x] Keyboard driven usage (probably need workspace commands)
- [x] Register `TogglePreviewTab` only when setting enabled?
- [x] Render preview tabs in tab switcher as italic
- [x] Render preview tabs in image viewer as italic
- [x] Should this be enabled by default (it is the default behavior in
VSCode)?
- [x] Docs
Future improvements (out of scope for now):
- Support preview mode for find all references and possibly other
multibuffers (VSCode: "Enable Preview From Code Navigation")
Release Notes:
- Added preview tabs
([#4922](https://github.com/zed-industries/zed/issues/4922)).
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Fixes regression from https://github.com/zed-industries/zed/pull/10341
where it was not possible to use non-zed environmental variables (e.g.
$PATH) in task definitions.
No release note, as this didn't land on Preview yet.
Release Notes:
- N/A
Release Notes:
- Extracted lua language support into an extension, and improved Lua
highlighting and completion label styling.
---------
Co-authored-by: Marshall <marshall@zed.dev>
Release Notes:
- Extracted GLSL language support into an extension.
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Release Notes:
- Fixed a bug where extension installation would appear to succeed even
if the download did not complete due to network interruptions
([#10330](https://github.com/zed-industries/zed/issues/10330)).
Co-authored-by: Marshall <marshall@zed.dev>
New list (used tasks are above the separator line, sorted by the usage
recency), then all language tasks, then project-local and global tasks
are listed.
Note that there are two test tasks (for `test_name_1` and `test_name_2`
functions) that are created from the same task template:
<img width="563" alt="Screenshot 2024-04-10 at 01 00 46"
src="https://github.com/zed-industries/zed/assets/2690773/7455a82f-2af2-47bf-99bd-d9c5a36e64ab">
Tasks are deduplicated by labels, with the used tasks left in case of
the conflict with the new tasks from the template:
<img width="555" alt="Screenshot 2024-04-10 at 01 01 06"
src="https://github.com/zed-industries/zed/assets/2690773/8f5a249e-abec-46ef-a991-08c6d0348648">
Regular recent tasks can be now removed too:
<img width="565" alt="Screenshot 2024-04-10 at 01 00 55"
src="https://github.com/zed-industries/zed/assets/2690773/0976b8fe-b5d7-4d2a-953d-1d8b1f216192">
When the caret is in the place where no function symbol could be
retrieved, no cargo tests for function are listed in tasks:
<img width="556" alt="image"
src="https://github.com/zed-industries/zed/assets/2690773/df30feba-fe27-4645-8be9-02afc70f02da">
Part of https://github.com/zed-industries/zed/issues/10132
Reworks the task code to simplify it and enable proper task labels.
* removes `trait Task`, renames `Definition` into `TaskTemplate` and use
that instead of `Arc<dyn Task>` everywhere
* implement more generic `TaskId` generation that depends on the
`TaskContext` and `TaskTemplate`
* remove `TaskId` out of the template and only create it after
"resolving" the template into the `ResolvedTask`: this way, task
templates, task state (`TaskContext`) and task "result" (resolved state)
are clearly separated and are not mixed
* implement the logic for filtering out non-related language tasks and
tasks that have non-resolved Zed task variables
* rework Zed template-vs-resolved-task display in modal: now all reruns
and recently used tasks are resolved tasks with "fixed" context (unless
configured otherwise in the task json) that are always shown, and Zed
can add on top tasks with different context that are derived from the
same template as the used, resolved tasks
* sort the tasks list better, showing more specific and least recently
used tasks higher
* shows a separator between used and unused tasks, allow removing the
used tasks same as the oneshot ones
* remote the Oneshot task source as redundant: all oneshot tasks are now
stored in the inventory's history
* when reusing the tasks as query in the modal, paste the expanded task
label now, show trimmed resolved label in the modal
* adjusts Rust and Elixir task labels to be more descriptive and closer
to bash scripts
Release Notes:
- Improved task modal ordering, run and deletion capabilities
Currently in Zed, certain characters require pressing the key twice to
move the caret through that character. For example: "❤️" and "y̆".
The reason for this is as follows:
Currently, Zed uses `chars` to distinguish different characters, and
calling `chars` on `y̆` will yield two `char` values: `y` and `\u{306}`,
and calling `chars` on `❤️` will yield two `char` values: `❤` and
`\u{fe0f}`.
Therefore, consider the following scenario (where ^ represents the
caret):
- what we see: ❤️ ^
- the actual buffer: ❤ \u{fe0f} ^
After pressing the left arrow key once:
- what we see: ❤️ ^
- the actual buffer: ❤ ^ \u{fe0f}
After pressing the left arrow key again:
- what we see: ^ ❤️
- the actual buffer: ^ ❤ \u{fe0f}
Thus, two left arrow key presses are needed to move the caret, and this
PR fixes this bug (or this is actually a feature?).
I have tried to keep the scope of code modifications as minimal as
possible. In this PR, Zed handles such characters as follows:
- what we see: ❤️ ^
- the actual buffer: ❤ \u{fe0f} ^
After pressing the left arrow key once:
- what we see: ^ ❤️
- the actual buffer: ^ ❤ \u{fe0f}
Or after pressing the delete key:
- what we see: ^
- the actual buffer: ^
Please note that currently, different platforms and software handle
these special characters differently, and even the same software may
handle these characters differently in different situations. For
example, in my testing on Chrome on macOS, GitHub treats `y̆` as a
single character, just like in this PR; however, in Rust Playground,
`y̆` is treated as two characters, and pressing the delete key does not
delete the entire `y̆` character, but instead deletes `\u{306}` to yield
the character `y`. And they both treat `❤️` as a single character,
pressing the delete key will delete the entire `❤️` character.
This PR is based on the principle of making changes with the smallest
impact on the code, and I think that deleting the entire character with
the delete key is more intuitive.
Release Notes:
- Fix caret movement issue for some special characters
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
There hasn't been a componentized way to create inputs or text fields
thus far due to the innate circular dependency between the `ui` and
`editor` crates. To bypass this issue we are introducing a new
`ui_text_field` crate to specifically handle this component.
`TextField` provides the ability to add stacked or inline labels, as
well as applies a standard visual style to inputs.
Example:
We'll continue to evolve this component in the near future and start
using it in the app once we've built out the needed functionality.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Followup to #10327
It can be enabled with the following setting:
"line_indicator_format": "short"
No release note, as the original change didn't go out to Preview yet.
/cc @bartekpacia @0x2CA
Release Notes:
- N/A
Release Notes:
- N/A
Picks up https://github.com/kvark/blade/pull/105,
https://github.com/kvark/blade/pull/97, and more
Switches the presentation to be non-blocking, which will improve the
latency slightly.
Allows to start playing with GLES backend, e.g.
```bash
cd crates/gpui
RUSTFLAGS="--cfg gles" CARGO_TARGET_DIR=./target-gl cargo run --example hello_world
```
It doesn't currently render properly due to an issue that needs
investigation, see
https://github.com/kvark/blade/pull/105#issuecomment-2041006542
But at least it's a start
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This should help with some of the memory problems reported in
https://github.com/zed-industries/zed/issues/8436, especially the ones
related to large files (see:
https://github.com/zed-industries/zed/issues/8436#issuecomment2037442695),
by **reducing the memory required to represent a buffer in Zed by
~50%.**
### How?
Zed's memory consumption is dominated by the in-memory representation of
buffer contents.
On the lowest level, the buffer is represented as a
[Rope](https://en.wikipedia.org/wiki/Rope_(data_structure)) and that's
where the most memory is used. The layers above — buffer, syntax map,
fold map, display map, ... — basically use "no memory" compared to the
Rope.
Zed's `Rope` data structure is itself implemented as [a `SumTree` of
`Chunks`](8205c52d2b/crates/rope/src/rope.rs (L35-L38)).
An important constant at play here is `CHUNK_BASE`:
`CHUNK_BASE` is the maximum length of a single text `Chunk` in the
`SumTree` underlying the `Rope`. In other words: It determines into how
many pieces a given buffer is split up.
By changing `CHUNK_BASE` we can adjust the level of granularity
withwhich we index a given piece of text. Theoretical maximum is the
length of the text, theoretical minimum is 1. Sweet spot is somewhere
inbetween, where memory use and performance of write & read access are
optimal.
We started with `16` as the `CHUNK_BASE`, but that wasn't the result of
extensive benchmarks, more the first reasonable number that came to
mind.
### What
This changes `CHUNK_BASE` from `16` to `64`. That reduces the memory
usage, trading it in for slight reduction in performance in certain
benchmarks.
### Benchmarks
I added a benchmark suite for `Rope` to determine whether we'd regress
in performance as `CHUNK_BASE` goes up. I went from `16` to `32` and
then to `64`. While `32` increased performance and reduced memory usage,
`64` had one slight drop in performance, increases in other benchmarks
and substantial memory savings.
| `CHUNK_BASE` from `16` to `32` | `CHUNK_BASE` from `16` to `64` |
|-------------------|--------------------|
|
|
|
### Real World Results
We tested this by loading a 138 MB `*.tex` file (parsed as plain text)
into Zed and measuring in `Instruments.app` the allocation.
#### standard allocator
Before, with `CHUNK_BASE: 16`, the memory usage was ~827MB after loading
the buffer.
| `CHUNK_BASE: 16` |
|---------------------|
|
|
After, with `CHUNK_BASE: 64`, the memory usage was ~396MB after loading
the buffer.
| `CHUNK_BASE: 64` |
|---------------------|
|
|
#### `mimalloc`
`MiMalloc` by default and that seems to be pretty aggressive when it
comes to growing memory. Whereas the std allocator would go up to
~800mb, MiMalloc would jump straight to 1024MB.
I also can't get `MiMalloc` to work properly with `Instruments.app` (it
always shows 15MB of memory usage) so I had to use these `Activity
Monitor` screenshots:
| `CHUNK_BASE: 16` |
|---------------------|
|
|
| `CHUNK_BASE: 64` |
|---------------------|
|
|
### Release Notes
Release Notes:
- Reduced memory usage for files by up to 50%.
---------
Co-authored-by: Antonio <antonio@zed.dev>
This PR updates the extensions dependent on v0.0.6 of the
`zed_extension_api` crate to use the now-published version on crates.io
instead of a path dependency.
The impacted extensions are:
- `dart`
- `gleam`
- `haskell`
- `svelte`
Release Notes:
- N/A
This puts the Linux platform implementation at a similar code style and
quality to the macOS platform. The largest change is that I collapsed
the `LinuxPlatform` -> `[Backend]` -> `[Backend]State` ->
`[Backend]StateInner` to just `[Backend]` and `[Backend]State`, and in
the process removed most of the `Rc`s and `RefCell`s.
TODO:
- [x] Make sure that this is on-par with the existing implementation
- [x] Review in detail, now that the large changes are done.
- [ ] Update the roadmap
Release Notes:
- N/A
This PR contains various improvements for the markdown preview (some of
which were originally part of #7601).
Some improvements can be seen in the video (see also release notes down
below):
https://github.com/zed-industries/zed/assets/53836821/93324ee8-d366-464a-9728-981eddbfdaf7
Release Notes:
- Added action to open markdown preview in the same pane
- Added support for displaying channel notes in markdown preview
- Added support for displaying the current active editor when opening
markdown preview
- Added support for scrolling the editor to the corresponding block when
double clicking an element in markdown preview
- Improved pane creation handling when opening markdown preview
- Fixed markdown preview displaying non-markdown files
This PR adds the ability for extensions to implement
`language_server_workspace_configuration` to provide workspace
configuration to the language server.
We've used the Dart extension as a motivating example for this, pulling
it out into an extension in the process.
Release Notes:
- Removed built-in support for Dart, in favor of making it available as
an extension. The Dart extension will be suggested for download when you
open a `.dart` file.
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR adds `label_for_symbol` to the extension API.
As a motivating example, we implemented `label_for_symbol` for the
Haskell extension.
Release Notes:
- N/A
Co-authored-by: Max <max@zed.dev>
This PR adds the ability for extensions to implement
`label_for_completion` to customize completions coming back from the
language server.
We've used the Gleam extension as a motivating example, adding
`label_for_completion` support to it.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This PR extracts HTML support into an extension and removes the built-in
HTML support from Zed.
Release Notes:
- Removed built-in support for HTML, in favor of making it available as
an extension. The HTML extension will be suggested for download when you
open a `.html`, `.htm`, or `.shtml` file.
Refs #9647
Fixes https://github.com/zed-industries/zed/issues/9792
This pull request moves the computation of scrollbar markers off the
main thread, to prevent them from grinding the editor to a halt when we
have a lot of them (e.g., when there are lots of search results on a
large file). With these changes we also avoid generating multiple quads
for adjacent markers, thus fixing an issue where we stop drawing other
primitives because we've drawn too many quads in the scrollbar.
Release Notes:
- Improved editor performance when displaying lots of search results,
diagnostics, or symbol highlights in the scrollbar
([#9792](https://github.com/zed-industries/zed/issues/9792)).
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Nathan <nathan@zed.dev>
Due to: https://github.com/zed-industries/zed/issues/9985 and an
abundance of caution, I'm reverting the image and svg rendering updates
for now until we can debug the issue. cc: @niklaswimmer
Release Notes:
- N/A
This PR extracts Clojure support into an extension and removes the
built-in Clojure support from Zed.
Release Notes:
- Removed built-in support for Clojure, in favor of making it available
as an extension. The Clojure extension will be suggested for download
when you open a `.clj` or other Clojure-related files.
---------
Co-authored-by: Max <max@zed.dev>
Partially implements #9717, persistence between restarts is currently
missing, but I would like to get feedback on the implementation first.
Previously the search history was not saved across different project
searches. As the `SearchHistory` is now maintained inside of the
project, it can be persisted across different project searches.
I also removed the behavior that a new query replaces the previous
search query, if it contains the text of the previous query.
I believe this was only intended to make buffer search work, therefore I
disabled this behavior but only for the project search.
Currently when you navigated through the queries the tab title changed
even if the search was not started, which doesn't make sense to me.
Current behavior:
https://github.com/zed-industries/zed/assets/53836821/1c365702-e93c-4cab-a1eb-0af3fef95476
With this PR the tab header will actually keep the search name until you
start another search again.
---
Showcase:
https://github.com/zed-industries/zed/assets/53836821/c0d6e496-915f-44bc-be16-12d7c3cda2d7
Release Notes:
- Added support for persisting project search history across a session
- Fixed tab header of project search changing when cycling through
search history, even when there is no search submitted
This PR adds a new function, `make-file-executable`, to the Zed
extension API that can be used to mark a given file as executable
(typically the language server binary).
This is available in v0.0.5 of the `zed_extension_api` crate.
We also reworked how we represent the various WIT versions on disk to
make it a bit clearer what the version number entails.
Release Notes:
- N/A
---------
Co-authored-by: Max <max@zed.dev>
tab switcher retrieves active pane from workspace, but that function is
not aware of Terminal Panel's pane. Thus in this PR we retrieve it
manually and use it as the active pane if terminal panel has focus.
Release Notes:
- Fixed tab switcher not working in terminal panel.
This PR extracts Erlang support into an extension and removes the
built-in Erlang support from Zed.
Tested using a Nix shell:
```
nix-shell -p erlang-ls
```
Release Notes:
- Removed built-in support for Erlang, in favor of making it available
as an extension. The Erlang extension will be suggested for download
when you open a `.erl` or `.hrl` file.
@SomeoneToIgnore This code should 100% work for future Zed users, but
for current Zed users, Zed's internal list of recents may not be synced
w/ macOS' Recent Documents at first. If needed this can be fixed by
calling `cx.refresh_recent_documents` on startup, but that feels a bit
unnecessary.
Release Notes:
- Fixes behavior of Recent Documents list on macOS
This PR syncs the version number in the `Cargo.toml` with the one in
`extension.toml` for the `toml` extension, since they had gotten
out-of-sync.
Release Notes:
- N/A
Introducing the Active File Context portion of #9705. When someone is in
the assistant panel it now includes the active file as a system message
on send while showing them a nice little display in the lower right:
For this iteration, I'd love to see the following before we land this:
* [x] Toggle-able context - user should be able to disable sending this
context
* [x] Show nothing if there is no context coming in
* [x] Update token count as we change items
* [x] Listen for a more finely scoped event for when the active item
changes
* [x] Create a global for pulling a file icon based on a path. Zed's
main way to do this is nested within project panel's `FileAssociation`s.
* [x] Get the code fence name for a Language for the system prompt
* [x] Update the token count when the buffer content changes
I'm seeing this PR as the foundation for providing other kinds of
context -- diagnostic summaries, failing tests, additional files, etc.
Release Notes:
- Added file context to assistant chat panel
([#9705](https://github.com/zed-industries/zed/issues/9705)).
<img width="1558" alt="image"
src="https://github.com/zed-industries/zed/assets/836375/86eb7e50-3e28-4754-9c3f-895be588616d">
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR extracts C# support into an extension and removes the built-in
C# support from Zed.
Tested using a Nix shell:
```
nix-shell -p dotnet-sdk omnisharp-roslyn
```
Release Notes:
- Removed built-in support for C#, in favor of making it available as an
extension. The C# extension will be suggested for download when you open
a `.cs` file.
This PR extracts PHP support into an extension and removes the built-in
PHP support from Zed.
There's a small workaround necessary in order for us to provide the
`language_ids` on the `LspAdapter` that are needed for the language
server to run properly. Eventually we'll want to build this into the
extension API, but for now we're just hard-coding it on the host side.
Release Notes:
- Removed built-in support for PHP, in favor of making it available as
an extension. The PHP extension will be suggested for download when you
open a `.php` file.
These tasks are not considered for reruns with `task::Rerun`.
This PR tears a bunch of stuff up around tasks:
- `menu::SecondaryConfirm` for tasks is gonna spawn a task without
storing it in history instead of being occupied by oneshot tasks. This
is done so that cmd-clicking on the menu item actually does something
meaningful.
- `menu::UseSelectedQuery` got moved into picker, as tasks are it's only
user (and it doesn't really make sense as a menu action).
TODO:
- [x] add release note
- [x] Actually implement the core of this feature, which is spawning a
task without saving it in history, lol.
Fixes#9804
Release Notes:
- Added "fire-and-forget" task spawning; `menu::SecondaryConfirm` in
tasks modal now spawns a task without registering it as the last spawned
task for the purposes of `task::Rerun`. By default you can spawn a task
in this fashion with cmd+enter or by holding cmd and clicking on a task
entry in a list. Spawning oneshots has been rebound to `option-enter`
(under a `picker::ConfirmInput` name). Fixes#9804 (breaking change)
- Moved `menu::UseSelectedQuery` action to `picker` namespace (breaking
change).
This PR extracts the `SemanticVersion` out of `util` and into its own
`SemanticVersion` crate.
This allows for making use of `SemanticVersion` without needing to pull
in some of the heavier dependencies included in the `util` crate.
As part of this the public API for `SemanticVersion` has been tidied up
a bit.
Release Notes:
- N/A
Previously it expanded to a label, which was correct for oneshots, but
wrong for everything else.
Release Notes:
- Improved UseSelectedQuery (shift-enter) action for tasks modal by
making it substitute a full command and not the task label.
- Fixed one-shot tasks having duplicates in tasks modal.
This PR extracts TOML support into an extension and removes the built-in
TOML support from Zed.
There's a small workaround necessary in order for us to set the file
permissions on the `taplo` binary so that it can be run. Eventually
we'll want to build this into the extension API, but for now we're just
hard-coding it on the host side.
Release Notes:
- Removed built-in support for TOML, in favor of making it available as
an extension. The TOML extension will be suggested for download when you
open a `.toml` or `Cargo.lock` file.
* [x] auto update extensions on startup
* [ ] add a manual way of updating all?
* [x] add a way to opt out of auto-updates for a particular extension
We don't believe that there should be any background polling for
extension auto-updates, because it could be disruptive to the user.
Release Notes:
- Added an auto-update system for extensions.
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
crates/languages and extensions/gleam: handle different target envs (a
new variant of os: `pc-windows-gnu`)
crates/storybook: compile manifest for all windows targets (same as
#9815)
looks like fixes#9807, but there are still errors presented
<details>
```
[2024-03-27T12:07:25+03:00 INFO Zed] ========== starting zed ==========
[2024-03-27T12:07:26+03:00 INFO cosmic_text::font::system] Parsed 398 font faces in 60ms.
[2024-03-27T12:07:26+03:00 INFO db] Opening main db
[2024-03-27T12:07:26+03:00 ERROR util] crates\settings\src\settings_file.rs:76: EOF while parsing a value at line 1 column 0
[2024-03-27T12:07:26+03:00 ERROR util] crates\settings\src\keymap_file.rs:89: invalid binding value for keystroke escape, context Some("ChatPanel > MessageEditor")
Caused by:
no action type registered for chat_panel::CloseReplyPreview
[2024-03-27T12:07:26+03:00 INFO gpui::platform::windows::platform] use DCompositionWaitForCompositorClock for vsync
[2024-03-27T12:07:26+03:00 ERROR util] crates\zed\src\zed.rs:629: EOF while parsing a value at line 1 column 0
[2024-03-27T12:07:26+03:00 ERROR util] crates\zed\src/main.rs:720: Системе не удается найти указанный путь. (os error 3)
[2024-03-27T12:07:26+03:00 INFO db] Opening main db
[2024-03-27T12:07:26+03:00 INFO node_runtime] Node runtime install_if_needed
[2024-03-27T12:07:26+03:00 ERROR util] crates\workspace\src/workspace.rs:912: Error in last_window, select_row_bound expected single row result but found none for: SELECT
display,
window_state,
window_x,
window_y,
window_width,
window_height,
fullscreen
FROM
workspaces
WHERE
workspace_location IS NOT NULL
ORDER BY
timestamp DESC
LIMIT
1
[2024-03-27T12:07:26+03:00 INFO blade_graphics::hal::init] Adapter "NVIDIA GeForce RTX 3050 Ti Laptop GPU"
[2024-03-27T12:07:26+03:00 INFO blade_graphics::hal::init] Ray tracing is supported
[2024-03-27T12:07:27+03:00 WARN blade_graphics::hal::init] Requested size 1x1 is outside of surface capabilities
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_impl")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_transformed")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_impl")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_transformed")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_impl")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_transformed")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_impl")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_transformed")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_impl")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_transformed")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_impl")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_transformed")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_impl")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_transformed")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_impl")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_device_position_transformed")
[2024-03-27T12:07:27+03:00 INFO naga:🔙:spv::writer] Skip function Some("to_tile_position")
[2024-03-27T12:07:27+03:00 INFO blade_graphics::hal::resource] Creating texture 0x2b2528fec20 of size 1024x1024x1 and format R8Unorm, name 'atlas', handle 0
[2024-03-27T12:07:27+03:00 INFO blade_graphics::hal::resource] Creating buffer 0x2b2524762a0 of size 65536, name 'chunk-0', handle 1
[2024-03-27T12:07:27+03:00 INFO blade_graphics::hal::resource] Creating buffer 0x2b252477ba0 of size 4096, name 'chunk-0', handle 2
[2024-03-27T12:07:27+03:00 INFO blade_graphics::hal::resource] Creating buffer 0x2b2524765c0 of size 9184, name 'chunk-1', handle 3
[2024-03-27T12:07:27+03:00 ERROR util] crates\copilot_ui\src\copilot_completion_provider.rs:207: copilot is still starting
error: process didn't exit successfully: `target\release\Zed.exe` (exit code: 0xc0000005, STATUS_ACCESS_VIOLATION)
fish: Job 1, 'RUST_BACKTRACE=full RUST_LOG=in…' terminated by signal SIGSEGV (Address boundary error)
```
</details>
Release Notes:
- N/A
This adds a new action to the editor: `editor: toggle git blame`. When
used it turns on a sidebar containing `git blame` information for the
currently open buffer.
The git blame information is updated when the buffer changes. It handles
additions, deletions, modifications, changes to the underlying git data
(new commits, changed commits, ...), file saves. It also handles folding
and wrapping lines correctly.
When the user hovers over a commit, a tooltip displays information for
the commit that introduced the line. If the repository has a remote with
the name `origin` configured, then clicking on a blame entry opens the
permalink to the commit on the code host.
Users can right-click on a blame entry to get a context menu which
allows them to copy the SHA of the commit.
The feature also works on shared projects, e.g. when collaborating a
peer can request `git blame` data.
As of this PR, Zed now comes bundled with a `git` binary so that users
don't have to have `git` installed locally to use this feature.
### Screenshots
### TODOs
- [x] Bundling `git` binary
### Release Notes
Release Notes:
- Added `editor: toggle git blame` command that toggles a sidebar with
git blame information for the current buffer.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Piotr <piotr@zed.dev>
Co-authored-by: Bennet <bennetbo@gmx.de>
Co-authored-by: Mikayla <mikayla@zed.dev>
Updated version of #9741 with fixes for the problems raised in #9774. I
only verified that the images no longer look blueish on Linux, because I
don't have a Mac.
cc @osiewicz
Release Notes:
- N/A
---------
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
This PR extracts Zig support into an extension and removes the built-in
Zig support from Zed.
There's a small workaround necessary in order for us to set the file
permissions on the `zls` binary so that it can be run. Eventually we'll
want to build this into the extension API, but for now we're just
hard-coding it on the host side.
Release Notes:
- Removed built-in support for Zig, in favor of making it available as
an extension. The Zig extension will be suggested for download when you
open a `.zig` file.
Release Notes:
- Prevents the terminal from opening on release mode on Windows
Note: this also prevents Zed from logging to the terminal when it is
launched from the terminal. Is this expected behaviour on other
platforms?
---------
Co-authored-by: 白山風露 <shirayama.kazatsuyu@gmail.com>
The Tab Switcher implementation (#7653):
- `ctrl-tab` opens the Tab Switcher and moves selection to the
previously selcted tab. It also cycles selection forward.
- `ctrl-shift-tab` opens the Tab Switcher and moves selection to the
last tab in the list. It also cycles selection backward.
- Tab is selected and the Tab Switcher is closed on the shortcut
modifier key (`ctrl` by default) release.
- List items are in reverse activation history order.
- The list reacts to the item changes in background (new tab, tab
closed, tab title changed etc.)
Intentionally not in scope of this PR:
- File icons
- Close buttons
I will come back to these features. I think they need to be implemented
in separate PRs, and be synchronized with changes in how tabs are
rendered, to reuse the code as it's done in the current implementation.
The Tab Switcher looks usable even without them.
Known Issues:
Tab Switcher doesn't react to mouse click on a list item. It's not a tab
switcher specific problem, it looks like ctrl-clicks are not handled the
same way in Zed as cmd-clicks. For instance, menu items can be activated
with cmd-click, but don't react to ctrl-click. Since the Tab Switcher's
default keybinding is `ctrl-tab`, the user can only click an item with
`ctrl` pushed down, thus preventing `on_click()` from firing.
fixes#7653, #7321
Release Notes:
- Added Tab Switcher which is accessible via `ctrl-tab` and
`ctrl-shift-tab` (#7653) (#7321)
Related issues:
- Unblocks #7356, I hope 😄
How it looks and works (it's only `ctrl-tab`'s and `ctrl-shift-tab`'s,
no `enter`'s or mouse clicks):
https://github.com/zed-industries/zed/assets/2101250/4ad4ec6a-5314-481b-8b35-7ac85e43eb92
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
This PR extracts Astro support into an extension and removes the
built-in Astro support from Zed.
Release Notes:
- Removed built-in support for Astro, in favor of making it available as
an extension. The Astro extension will be suggested for download when
you open a `.astro` file.
This PR extracts Dockerfile support into an extension and removes the
built-in Dockerfile support from Zed.
There's already an existing [Dockerfile
extension](https://github.com/d1y/dockerfile.zed) that was just missing
language server support. Language server support is being added to that
extension in https://github.com/d1y/dockerfile.zed/pull/2.
Release Notes:
- Removed built-in support for Dockerfile, in favor of making it
available as an extension. The Dockerfile extension will be suggested
for download when you open a `Dockerfile`.
This PR extracts PureScript support into an extension and removes the
built-in PureScript support from Zed.
Release Notes:
- Removed built-in support for PureScript, in favor of making it
available as an extension. The PureScript extension will be suggested
for download when you open a `.purs` file.
This PR extracts Prisma support into an extension and removes the
built-in Prisma support from Zed.
Release Notes:
- Removed built-in support for Prisma, in favor of making it available
as an extension. The Prisma extension will be suggested for download
when you open a `.prisma` file.
This PR extracts Haskell support into an extension and removes the
built-in Haskell support from Zed.
I tested out the extension locally in a Nix shell using `nix-shell -p
ghc haskell-language-server` to confirm the language server still
operated as expected:
<img width="341" alt="Screenshot 2024-03-26 at 11 26 26 AM"
src="https://github.com/zed-industries/zed/assets/1486634/df16fd38-4046-4a45-ac9f-c2b85bffe5c0">
Release Notes:
- Removed built-in support for Haskell, in favor of making it available
as an extension. The Haskell extension will be suggested for download
when you open a `.hs` file.
This pull request introduces a new `InlineCompletionProvider` trait,
which enables making `Editor` copilot-agnostic and lets us push all the
copilot functionality into the `copilot_ui` module. Long-term, I would
like to merge `copilot` and `copilot_ui`, but right now `project`
depends on `copilot`, which makes this impossible.
The reason for adding this new trait is so that we can experiment with
other inline completion providers and swap them at runtime using config
settings.
Please, note also that we renamed some of the existing copilot actions
to be more agnostic (see release notes below). We still kept the old
actions bound for backwards-compatibility, but we should probably remove
them at some later version.
Also, as a drive-by, we added new methods to the `Global` trait that let
you read or mutate a global directly, e.g.:
```rs
MyGlobal::update(cx, |global, cx| {
});
```
Release Notes:
- Renamed the `copilot::Suggest` action to
`editor::ShowInlineCompletion`
- Renamed the `copilot::NextSuggestion` action to
`editor::NextInlineCompletion`
- Renamed the `copilot::PreviousSuggestion` action to
`editor::PreviousInlineCompletion`
- Renamed the `editor::AcceptPartialCopilotSuggestion` action to
`editor::AcceptPartialInlineCompletion`
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Kyle <kylek@zed.dev>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
* Store extensions versions' wasm API version in the database
* Share a common struct for extension API responses between collab and
client
* Add wasm API version and schema version to extension API responses
Release Notes:
- N/A
Co-authored-by: Marshall <marshall@zed.dev>
The latest update to resvg bumped some transitive dependencies
which lead to duplicates. The update to the image dependency
unifies most of their versions again.
Most notably, gif and kurbo are still duplicated, which is best fixed
downstream however.
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
We're doing it. Svelte support is moving into an extension. This PR
fixes some issues that came up along the way.
Notes
* extensions need to be able to retrieve the path the `node` binary
installed by Zed
* previously we were silently swallowing any errors that occurred while
loading a grammar
* npm commands ran by extensions weren't run in the right directory
* Tree-sitter's WASM stdlib didn't support a C function (`strncmp`)
needed by the Svelte parser's external scanner
* the way that LSP installation status was reported was unnecessarily
complex
Release Notes:
- Removed built-in support for the Svelte and Gleam languages, because
full support for those languages is now available via extensions. These
extensions will be suggested for download when you open a `.svelte` or
`.gleam` file.
---------
Co-authored-by: Marshall <marshall@zed.dev>
This PR adds a new `assistant.enabled` setting that controls whether the
Zed Assistant is enabled.
Some users have requested the ability to disable the AI-related features
in Zed if they don't use them. Changing `assistant.enabled` to `false`
will hide the Assistant icon in the status bar (taking priority over the
`assistant.button` setting) as well as filter out the `assistant:`
actions.
The Assistant is enabled by default.
Release Notes:
- Added an `assistant.enabled` setting to control whether the Assistant
is enabled.
This PR also introduces built-in tasks for Rust and Elixir. Note that
this is not a precedent for future PRs to include tasks for more
languages; we simply want to find the rough edges with tasks & language
integrations before proceeding to task contexts provided by extensions.
As is, we'll load tasks for all loaded languages, so in order to get
Elixir tasks, you have to open an Elixir buffer first. I think it sort
of makes sense (though it's not ideal), as in the future where
extensions do provide their own tasks.json, we'd like to limit the # of
tasks surfaced to the user to make them as relevant to the project at
hand as possible.
Release Notes:
- Added built-in tasks for Rust and Elixir files.
This PR provides some of the plumbing needed for a "remote" zed
instance.
The way this will work is:
* From zed on your laptop you'll be able to manage a set of dev servers,
each of which is identified by a token.
* You'll run `zed --dev-server-token XXXX` to boot a remotable dev
server.
* From the zed on your laptop you'll be able to open directories and
work on the projects on the remote server (exactly like collaboration
works today).
For now all this PR does is provide the ability for a zed instance to
sign in
using a "dev server token". The next steps will be:
* Adding support to the collaboration protocol to instruct a dev server
to "open" a directory and share it into a channel.
* Adding UI to manage these servers and tokens (manually for now)
Related #5347
Release Notes:
- N/A
---------
Co-authored-by: Nathan <nathan@zed.dev>
Release Notes:
- Work around #8334 by only activating venv in the terminal not in tasks
(see #8440 for a proper solution)
- To use venv modify your tasks in the following way:
```json
{
"label": "Python main.py",
"command": "sh",
"args": ["-c", "source .venv/bin/activate && python3 main.py"]
}
```
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
We can convert shell, npm and gulp tasks to a Zed format. Additionally, we convert a subset of task variables that VsCode supports.
Release notes:
- Zed can now load tasks in Visual Studio Code task format
---------
Co-authored-by: Piotr Osiewicz <piotr@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Antonio <antonio@zed.dev>
Resurrected this from some assistant work I did in Spring of 2023.
- [x] Resurrect streaming responses
- [x] Use streaming responses to enable AI via Zed's servers by default
(but preserve API key option for now)
- [x] Simplify protobuf
- [x] Proxy to OpenAI on zed.dev
- [x] Proxy to Gemini on zed.dev
- [x] Improve UX for switching between openAI and google models
- We current disallow cycling when setting a custom model, but we need a
better solution to keep OpenAI models available while testing the google
ones
- [x] Show remaining tokens correctly for Google models
- [x] Remove semantic index
- [x] Delete `ai` crate
- [x] Cloud front so we can ban abuse
- [x] Rate-limiting
- [x] Fix panic when using inline assistant
- [x] Double check the upgraded `AssistantSettings` are
backwards-compatible
- [x] Add hosted LLM interaction behind a `language-models` feature
flag.
Release Notes:
- We are temporarily removing the semantic index in order to redesign it
from scratch.
---------
Co-authored-by: Antonio <antonio@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Max <max@zed.dev>
This will be used in the
[extensions](https://github.com/zed-industries/extensions) repository
for packaging the extensions that users submit.
Release Notes:
- N/A
---------
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
This patch puts the prost, prost-build, and prost-types dependencies
together and unifies their version. This improves organization a bit in
addition to improving build time slightly, since a redundant version of
prost is now removed.
The dependencies are _not_ updated to the newest versions, because the
newest versions add a dependency on the `protoc` application, which is
not provided by cargo and thus breaks the building process.
Fixes#8528
Release Notes:
- Fixed a crash that could occur when editing certain SQL files.
- Fixed a general class of crashes that could occur due to bugs in
grammars added via extensions.
Co-authored-by: Marshall <marshall@zed.dev>
This PR refactors the `CommandPaletteFilter` and
`CommandPaletteInterceptor` to better encapsulate their internals.
Previously these globals and their fields were publicly accessible,
which meant that there was a lot of reaching in and making
modifications.
These changes should make it easier to add additional consumers of these
hooks (right now they're primarily used by Vim mode).
Release Notes:
- N/A
Fixes: https://github.com/zed-industries/zed/issues/9234
This doesn't address `vue` as it has a slightly different install code,
but it should be fairly simple to add - I'll add it in in a follow-up.
This PR will allow all (except `vue`) node-based language servers to
update. It is mostly just throwing in a method into the `NodeRuntime`
trait that is used for checking if a package doesn't exist locally, or
is out of date, by checking the version against what's newest, and
installing. If any parsing of the `package.json` data fails along the
way, it assumes something has gone awry on the users system, logs the
error, and then proceeds with trying to install the package, so that
users don't get stuck on version if their package has some bad data.
Outside of adding this method, it just adds that check in all of the
language server's individual `fetch_server_binary` methods.
Release Notes:
- Added updating for node-based language servers
([#9234](https://github.com/zed-industries/zed/issues/9234)).
Tested on my laptop, and I've noticed that when I move the window,
`WindowsPlatform::displays()` is being continuously called. Is this
intended?
Release Notes:
- N/A
Switch to using `x11rb` crate instead of current `xcb` crate for gpui's
x11 platform.
Also fixes the crash on resize, and white flashing on resize.
Release Notes:
- N/A
---------
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Follow up of #7994 to rework the notification panel timestamps.
This PR also includes some of the changes @evrsen proposed in #8996
Here is what it looks like now:
https://github.com/zed-industries/zed/assets/53836821/d85450e7-eab6-4fe7-bd11-1d76c0e87258
Release Notes:
- Reworked date time formatting in the chat and the notification panel
- Added hover style to notifications and hovering tooltip on timestamps
---------
Co-authored-by: Evren Sen <146845123+evrsen@users.noreply.github.com>
I've also made Copilot's modal regain focus whenever you click on it, as
otherwise there's nothing inside of it that can gain focus. Clicks do
not fall through a modal, which I think is nice.
Release Notes:
- Fixed the issue where pressing ESC (`menu::Cancel`) did not exit the
Copilot modal. Fixes#8852
This is just a refactor. I noticed that we now have a `project_core`
crate, which mainly contains the `Worktree` type and its private
helpers, plus the project's settings.
In this PR, I've renamed that crate to `worktree` and did some minor
simplification to its module structure. I also extracted a new
`WorktreeSettings` settings type from the `ProjectSettings`, so that the
worktree settings could live in the worktree crate. This way, the crate
is now exclusively about worktree logic.
Release Notes:
- N/A
This PR removes the feedback button from the status bar, as Nathan and I
discussed. We discussed the fact that we likely no longer need to take
up valuable screen real estate for this, with where Zed as at now.
This PR also moves the `Share Feedback...` collab menu item to the
`Help` menu, as that's where VS Code puts their action to send in-app
feedback (which might help with future discoverability) and renames it
to `Give Feedback...`, to make it consistent with the name of the
command palette action.
Release Notes:
- Removed the feedback button from the status bar.
This PR simplifies the Zed file system abstraction and implements
`Fs::watch` for linux and windows.
TODO:
- [x] Figure out why this fails to initialize the file watchers when we
have to initialize the config directory paths, but succeeds on
subsequent runs.
- [x] Fix macOS dependencies on old fsevents::Event crate
Release Notes:
- N/A
In this PR, we've added two new methods that LSP extensions can call:
* `shell_env()`, for retrieving the environment variables set in the
user's default shell in the worktree
* `which(command)`, for looking up paths to an executable (accounting
for the user's shell env in the worktree)
To test this out, we moved the `uiua` language support into an
extension. We went ahead and removed the built-in support, since this
language is extremely obscure. Sorry @mikayla-maki. To continue coding
in Uiua in Zed, for now you can `Add Dev Extension` from the extensions
pane, and select the `extensions/uiua` directory in the Zed repo. Very
soon, we'll support publishing these extensions so that you'll be able
to just install it normally.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
This PR provides WASM extensions with write access to their own specific
working directory under the Zed `extensions` dir. This directory is set
as the extensions `current_dir` when they run. Extensions can return
relative paths from the `Extension::language_server_command` method, and
those relative paths will be interpreted relative to this working dir.
With this functionality, most language servers that we currently build
into zed can be installed using extensions.
Release Notes:
- N/A
This reduces the server time to compute the hash from 40ms to 5µs,
which should remove this as a noticable chunk of CPU time in production.
(An attacker who has access to our database will now need only 10^54
years of CPU time instead of 10^58 to brute force a token).
Release Notes:
- Improved sign in latency by 40ms.
This PR adds an `zed: Install Local Extension` action, which lets you
select a path to a folder containing a Zed extension, and install that .
When you select a directory, the extension will be compiled (both the
Tree-sitter grammars and the Rust code for the extension itself) and
installed as a Zed extension, using a symlink.
### Details
A few dependencies are needed to build an extension:
* The Rust `wasm32-wasi` target. This is automatically installed if
needed via `rustup`.
* A wasi-preview1 adapter WASM module, for building WASM components with
Rust. This is automatically downloaded if needed from a `wasmtime`
GitHub release
* For building Tree-sitter parsers, a distribution of `wasi-sdk`. This
is automatically downloaded if needed from a `wasi-sdk` GitHub release.
The downloaded artifacts are cached in a support directory called
`Zed/extensions/build`.
### Tasks
UX
* [x] Show local extensions in the Extensions view
* [x] Provide a button for recompiling a linked extension
* [x] Make this action discoverable by adding a button for it on the
Extensions view
* [ ] Surface errors (don't just write them to the Zed log)
Packaging
* [ ] Create a separate executable that performs the extension
compilation. We'll switch the packaging system in our
[extensions](https://github.com/zed-industries/extensions) repo to use
this binary, so that there is one canonical definition of how to
build/package an extensions.
### Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
### Description
This is a part of #8809
Update mio from 0.8.8 to 0.8.11.
When using named pipes on Windows, mio will under some circumstances
return invalid tokens that correspond to named pipes that have already
been deregistered from the mio registry. The impact of this
vulnerability depends on how mio is used. For some applications, invalid
tokens may be ignored or cause a warning or a crash. On the other hand,
for applications that store pointers in the tokens, this vulnerability
may result in a use-after-free.
### Connections
[named-pipes: fix receiving IOCP events after deregister
#1760](https://github.com/tokio-rs/mio/pull/1760)
[Windows Named pipes invalid memory access
#6369](https://github.com/tokio-rs/tokio/issues/6369)
Release Notes:
- N/A
## Problem
We're trying to figure out why we sometimes see high latency when
collaborating, even though the collab server logs indicate that messages
are not taking long to process.
We think that high volumes of certain types of messages, including
`UpdateFollowers` may cause a lot of messages to queue up, causing
delays before collab sees certain messages.
## Fix
This PR reduces the number of `UpdateFollowers` messages that clients
send to collab when scrolling around or moving the cursor, using a
time-based throttle.
The downside of this change is that scrolling will not be as smooth when
following someone. The advantage is that it will be much easier to keep
up with the stream of updates, since they will be sent much less
frequently.
## Release Notes:
- Fixed slowness that could occur when collaborating due to excessive
messages being sent to support following.
---------
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Conrad <conrad@zed.dev>
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Thorsten <thorsten@zed.dev>
Co-authored-by: Thorsten Ball <mrnugget@gmail.com>
We've also upgraded `Axum` in order to avoid having two versions of that
library in Collab (one due to Tokio-console).
Release Notes:
- N/A
---------
Co-authored-by: Conrad <conrad@zed.dev>
This PR moves the Clippy configuration up to the workspace level.
We're using the [`lints`
table](https://doc.rust-lang.org/cargo/reference/workspaces.html#the-lints-table)
to configure the Clippy ruleset in the workspace's `Cargo.toml`.
Each crate in the workspace now has the following in their own
`Cargo.toml` to inherit the lints from the workspace:
```toml
[lints]
workspace = true
```
This allows for configuring rust-analyzer to show Clippy lints in the
editor by using the following configuration in your Zed `settings.json`:
```json
{
"lsp": {
"rust-analyzer": {
"initialization_options": {
"check": {
"command": "clippy"
}
}
}
}
```
Release Notes:
- N/A
Also adds a new command `cli: Register Zed Scheme` that will cause URLs
to be opened in the current zed version, and we call this implicitly if
you install the CLI
Also add some status reporting to install cli
Fixes: #8857
Release Notes:
- Added success/error reporting to `cli: Install Cli`
([#8857](https://github.com/zed-industries/zed/issues/8857)).
- Removed `zed-{preview,nightly,dev}:` url schemes (used by channel
links)
- Added `cli: Register Zed Scheme` to control which zed handles the
`zed://` scheme (defaults to the most recently installed, or
the version that you last used `cli: Install Cli` with)
This PR supplements tasks with additional environment variables; ideally
we'll be able to write a task like:
`cargo test -p $ZED_CURRENT_PACKAGE -- $ZED_CURRENT_FUNCTION`
- [x] Flesh out multibuffer interactions
- [x] Add ZED_SYMBOL detection based on tree-sitter queries
- [ ] Add release note and demo
- [x] Figure out a solution for rerun dilemma - should `task: rerun`
reevaluate contexts for tasks?
This PR introduced the following variables:
- ZED_COLUMN - current line column
- ZED_ROW - current line row
and the following, which are available for buffers with associated
files:
- ZED_WORKTREE_ROOT - absolute path to the root of the current worktree.
- ZED_FILE - absolute path to the file
- ZED_SYMBOL - currently selected symbol; should match the last symbol
shown in a symbol breadcrumb (e.g. `mod tests > fn test_task_contexts`
should be equal to ZED_SYMBOL of `test_task_contexts`). Note that this
isn't necessarily a test function or a function at all.
Also, you can use them in `cwd` field of definitions (note though that
we're using https://docs.rs/subst/latest/subst/#features for that, so
don't expect a full shell functionality to work); the syntax should
match up with your typical Unix shell.
Release Notes:
- Added task contexts, which are additional environment variables set by
Zed for task execution; task content is dependent on the state of the
editor at the time the task is spawned.
---------
Co-authored-by: Anthony <anthonyeid7@protonmail.com>
This change implements gpui's credentials API for the linux platform,
using the [`oo7`](https://lib.rs/crates/oo7) library.
We had a short discussion on Discord about where to store credentials
and landed on the two dbus APIs
[`org.freedesktop.Secrets`](https://specifications.freedesktop.org/secret-service/latest/index.html)
and
[`org.freedesktop.portal.Secrets`](https://flatpak.github.io/xdg-desktop-portal/docs/doc-org.freedesktop.portal.Secret.html).
The first one provides access to a more or less general purpose
keystore, the second provides a way of obtaining a unique masterkey
which in turn can be used for encrypting stuff and storing it to disk
(especially interesting for sandboxed apps, think flatpak/snap).
I decided to give the implementation a try with `oo7`, which uses the
portal if the app is sandboxed and the secret service otherwise. If we
do not want to use that library, we would probably have to more or less
copy its functionality anyways. I also heard rumors of eventually
changing the credentials API and I think this implementation serves as a
starting point to discuss the need for this?
With a working credentials implementation the sign in button now works
(it panicked before).
Todos:
- [x] implement keystore unlocking
- [x] try the change with oo7's tracing enabled?
- [x] test the password deletion
Release Notes:
- N/A
---------
Signed-off-by: Niklas Wimmer <mail@nwimmer.me>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
While trying to get mouse/keyboard support in for Windows I ran into a
stack overflow issue related to the pid being `-1`. Getting the proper
process ID seems to fix it.
Release Notes:
- Fixed stack overflow on Windows
This PR sets up a `cargo xtask clippy` command for running `cargo
clippy` with our defined set of options.
The intent is to make this easier to manage as we start enabling more
Clippy rules.
Release Notes:
- N/A
This PR upgrades our [`bitflags`](https://crates.io/crates/bitflags)
dependency to v2.4.2.
This also fixes an error that was seen when running `clippy`:
```
error: &-masking with zero
--> crates/fsevent/src/fsevent.rs:19:1
|
19 | / bitflags! {
20 | | #[repr(C)]
21 | | pub struct StreamFlags: u32 {
22 | | const NONE = 0x00000000;
... |
46 | | }
47 | | }
| |_^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#bad_bit_mask
= note: `#[deny(clippy::bad_bit_mask)]` on by default
= note: this error originates in the macro `__impl_bitflags` which comes from the expansion of the macro `bitflags` (in Nightly builds, run with -Z macro-backtrace for more info)
```
Fixes#8681.
Release Notes:
- N/A
This PR adds **internal** ability to run arbitrary language servers via
WebAssembly extensions. The functionality isn't exposed yet - we're just
landing this in this early state because there have been a lot of
changes to the `LspAdapter` trait, and other language server logic.
## Next steps
* Currently, wasm extensions can only define how to *install* and run a
language server, they can't yet implement the other LSP adapter methods,
such as formatting completion labels and workspace symbols.
* We don't have an automatic way to install or develop these types of
extensions
* We don't have a way to package these types of extensions in our
extensions repo, to make them available via our extensions API.
* The Rust extension API crate, `zed-extension-api` has not yet been
published to crates.io, because we still consider the API a work in
progress.
Release Notes:
- N/A
---------
Co-authored-by: Marshall <marshall@zed.dev>
Co-authored-by: Nathan <nathan@zed.dev>
Co-authored-by: Marshall Bowers <elliott.codes@gmail.com>
Follow-up of
https://github.com/zed-industries/zed/issues/8651#issuecomment-1973411072
Zed current default is still to reuse the current window, but now it's
possible to do
```json
"alt-cmd-o": [
"projects::OpenRecent",
{
"create_new_window": true
}
]
```
and change this.
menu::Secondary confirm does the action with opposite window creation
strategy.
Release Notes:
- Improved open recent projects flexibility: settings can change whether
`menu::Confirm` opens a new window or reuses the old one
This lets us run rustc_demangle on the backtrace, which helps the Slack
view significantly.
We're also now uploading files to digital ocean's S3 equivalent (with a
1 month expiry) instead of to Slack.
This PR paves the way for (but does not yet implement) sending this data
to clickhouse too.
Release Notes:
- N/A
This PR replaces a `lazy_static!` usage in the `time_format` crate with
`OnceLock` from the standard library.
This allows us to drop the `lazy_static` dependency from this crate.
Release Notes:
- N/A
This PR replaces a `lazy_static!` usage in the `ai` crate with
`OnceLock` from the standard library.
This allows us to drop the `lazy_static` dependency from this crate.
Release Notes:
- N/A
This PR wires up support for [Azure
OpenAI](https://learn.microsoft.com/en-us/azure/ai-services/openai/overview)
as an alternative AI provider in the assistant panel.
This can be configured using the following in the settings file:
```json
{
"assistant": {
"provider": {
"type": "azure_openai",
"api_url": "https://{your-resource-name}.openai.azure.com",
"deployment_id": "gpt-4",
"api_version": "2023-05-15"
}
},
}
```
You will need to deploy a model within Azure and update the settings
accordingly.
Release Notes:
- N/A
This PR unifies the event loop code for Wayland and X11. On Wayland,
blocking dispatch is now used. On X11, the invisible window is no longer
needed.
Release Notes:
- N/A
---------
Co-authored-by: Dzmitry Malyshau <kvark@fastmail.com>
Co-authored-by: Tadeo Kondrak <me@tadeo.ca>
Co-authored-by: Mikayla Maki <mikayla@zed.dev>
Co-authored-by: julia <julia@zed.dev>
After upgrading to Wasmtime 18, we got crashes when running Zed in debug
mode. While bisecting the Wasmtime commits and trying to identify the
source of the crash, we noticed this Wasmtime PR, which increased the
stack size of background threads in an example. This alerted us to the
possibility that a stack overflow might be happening due to a lot of
stack usage by cranelift.
https://github.com/bytecodealliance/wasmtime/pull/7651
Release Notes:
- N/A
Co-authored-by: Marshall <marshall@zed.dev>
This PR introduces a new `command_palette_hooks` crate that contains the
types used to hook into the behavior of the command palette.
The `CommandPaletteFilter` was previously extracted to the `copilot`
crate in #7095, solely because that was the earliest ancestor of the
crates that depended on it.
The `CommandPaletteInterceptor` was still defined in `command_palette`
itself.
Both of these types were consumed by other crates wanting to influence
the behavior of the command palette, but required taking a dependency on
the entire `command_palette` crate in order to gain access to these
hooks.
By moving them out into their own crate, we can improve the compile
order and make crates like `vim` able to begin building sooner without
having to wait for `command_palette` to finish compiling.
Here's a comparison of the compilation graph before and after (ignore
the timings):
#### Before
<img width="332" alt="Screenshot 2024-02-25 at 12 42 29 PM"
src="https://github.com/zed-industries/zed/assets/1486634/a57c662e-fbc2-41ab-9e30-cca17afa6c73">
#### After
<img width="362" alt="Screenshot 2024-02-25 at 12 51 15 PM"
src="https://github.com/zed-industries/zed/assets/1486634/c1a6d29c-b607-4604-8f1b-e5d318bf8849">
Release Notes:
- N/A
Following-up on #8330
Invocation
```bash
cargo-machete --with-metadata --skip-target-dir --fix
````
There is more stuff to fix, but it chokes on `async-lock`:
```
cargo-machete found the following unused dependencies in /x/Code/zed:
rpc -- /x/Code/zed/crates/rpc/Cargo.toml:
async_lock
prost_build
serde_derive
Error: Dependency async_lock not found
```
Release Notes:
- N/A
This PR removes the unused crates for plugin support.
We're currently exploring Wasm-based extensions, and it's unlikely that
we'll be reusing any of this existing work.
Release Notes:
- N/A
This is a follow up to #7945. The current behaviour reads the locale and
infers from that which type of time format should be used (12 hour/24
hour).
However, in macOS you can override this behaviour, e.g. you can use
en_US locale but still use the 24 hour clock format (Can be customized
under Settings > General > Date & Format > 24-hour time). You can even
customize the date format.
This PR uses the macOS specific `CFDateFormatter` API, which outputs
time format strings, that respect those settings.
Partially fixes#7956 (as its not implemented for linux)
Release Notes:
- Added localization support for all macOS specific date and time
configurations in chat
- Moves languages module from `zed` into a separate crate. That way we
have less of a long pole at the end of compilation.
- Removes moot dependencies on editor/picker. This is totally harmless
and might help in the future if we decide to decouple picker from
editor.
Before:
```
Number of crates that depend on 'picker' but not on 'editor': 1
Total number of crates that depend on 'picker': 13
Total number of crates that depend on 'editor': 30
```
After:
```
Number of crates that depend on 'picker' but not on 'editor': 5
Total number of crates that depend on 'picker': 12
Total number of crates that depend on 'editor': 26
```
The more crates depend on just picker but not editor, the better in that
case.
Release Notes:
- N/A
After a lot of back-and-forth, this is a small attempt to implement
solutions (1) and (3) in
https://github.com/zed-industries/zed/issues/7902. The goal is to have a
minimal change that helps users get started with Zed, until we have
extensions ready.
Release Notes:
- Added detection of user-installed `gopls` to Go language server
adapter. If a user has `gopls` in `$PATH` when opening a worktree, it
will be used.
- Added detection of user-installed `zls` to Zig language server
adapter. If a user has `zls` in `$PATH` when opening a worktree, it will
be used.
Example:
I don't have `go` installed globally, but I do have `gopls`:
```
~ $ which go
go not found
~ $ which gopls
/Users/thorstenball/code/go/bin/gopls
```
But I do have `go` in a project's directory:
```
~/tmp/go-testing φ which go
/Users/thorstenball/.local/share/mise/installs/go/1.21.5/go/bin/go
~/tmp/go-testing φ which gopls
/Users/thorstenball/code/go/bin/gopls
```
With current Zed when I run `zed ~/tmp/go-testing`, I'd get the dreaded
error:
But with the changes in this PR, it works:
```
[2024-02-23T11:14:42+01:00 INFO language::language_registry] starting language server "gopls", path: "/Users/thorstenball/tmp/go-testing", id: 1
[2024-02-23T11:14:42+01:00 INFO language::language_registry] found user-installed language server for Go. path: "/Users/thorstenball/code/go/bin/gopls", arguments: ["-mode=stdio"]
[2024-02-23T11:14:42+01:00 INFO lsp] starting language server. binary path: "/Users/thorstenball/code/go/bin/gopls", working directory: "/Users/thorstenball/tmp/go-testing", args: ["-mode=stdio"]
```
---------
Co-authored-by: Antonio <antonio@zed.dev>
Fixes https://github.com/zed-industries/zed/issues/7419 by changing the
way "recent projects" modal confirm actions work:
* `menu::Confirm` now reuses the current window when opening a recent
project
* `menu::SecondaryConfirm` now opens a recent project in the new window
* neither confirm tries to open the current project anymore
* modal's placeholder is adjusted to emphasize this behavior
Release Notes:
- Added a way to open recent projects in the new window
This PR adds a `SystemClock` trait for abstracting away the system
clock.
This allows us to swap out the real system clock with a
`FakeSystemClock` in the tests, thus allowing the fake passage of time.
We're using this in `Telemetry` to better mock the clock for testing
purposes.
Release Notes:
- N/A
[Profiling](https://crates.io/crates/profiling) crate allows easy
integration with various profiler tools. The best thing is - annotations
compile to nothing unless you request a specific feature.
For example, I used this command to enable Tracy support:
```bash
cargo run --features profiling/profile-with-tracy
```
At the same time I had Tracy tool open and waiting for connection. It
gathered nice stats from the run:
Release Notes:
- N/A
Release Notes:
- vim: Added a setting to control default clipboard behaviour. `{"vim":
{"use_system_clipboard": "never"}}` disables writing to the clipboard.
`"on_yank"` writes to the system clipboard only on yank, and `"always"`
preserves the current behavior. ([#4390
](https://github.com/zed-industries/zed/issues/4390))
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Release Notes:
- Added `workspace::SendKeystrokes` to enable mapping from one key to a
sequence of others
([#7033](https://github.com/zed-industries/zed/issues/7033)).
Improves #7033. Big thank you to @ConradIrwin who did most of the heavy
lifting on this one.
This PR allows the user to send multiple keystrokes via custom
keybinding. For example, the following keybinding would go down four
lines and then right four characters.
```json
[
{
"context": "Editor && VimControl && !VimWaiting && !menu",
"bindings": {
"g z": [
"workspace::SendKeystrokes",
"j j j j l l l l"
],
}
}
]
```
---------
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
@ConradIrwin here's our current implementation for auto detecting links
in the chat.
We also fixed an edge case where the close reply to preview button was
cut off (rendered off screen).
Release Notes:
- Added auto detection for links in the chat panel.
---------
Co-authored-by: Remco Smits <62463826+RemcoSmitsDev@users.noreply.github.com>
This is a compilation of fixes for errors that appeared in dependent
crates in Windows.
- wezterm (zed-industries/wezterm#1)
- tree-sitter-svelte (Himujjal/tree-sitter-svelte#54)
- tree-sitter-uiua (shnarazk/tree-sitter-uiua#25)
- tree-sitter-haskell (I sent a PR, but upstream source is regenerated
and no longer errors.)
Release Notes:
- N/A
Part of #7108
This PR includes just the static runnables part. We went with **not**
having a dedicated panel for runnables.
This is just a 1st PR out of N, as we want to start exploring the
dynamic runnables front. Still, all that work is going to happen once
this gets merged.
Release Notes:
- Added initial, static Runnables support to Zed. Such runnables are defined in
`runnables.json` file (accessible via `zed: open runnables` action) and
they can be spawned with `runnables: spawn` action.
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Pitor <pitor@zed.dev>
Co-authored-by: Beniamin <beniamin@zagan.be>
